aboutsummaryrefslogtreecommitdiff
path: root/qemu-io-cmds.c
AgeCommit message (Collapse)Author
2017-07-10block: Make bdrv_is_allocated() byte-basedEric Blake
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-26block: change variable names in BlockDriverStateManos Pitsidianakis
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related functions (and some others) to 'int bytes', as they both refer to bytes. This helps with code legibility. Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11qemu-io: Switch 'map' output to byte-based reportingEric Blake
Mixing byte offset and sector allocation counts is a bit confusing. Also, reporting n/m sectors, where m decreases according to the remaining size of the file, isn't really adding any useful information; and reporting an offset at both the front and end of the line, with large amounts of whitespace, is pointless. Update the output to use byte counts and shorter lines, then adjust the affected tests (./check -qcow2 102, ./check -vpc 146). Note that 'qemu-io map' is MUCH weaker than 'qemu-img map'; the former only shows which regions of the active layer are allocated, without regards to where the allocation comes from or whether the allocated portion is known to read as zero (because it is using the weaker bdrv_is_allocated()); while the latter (especially in --output=json mode) reports more details from bdrv_get_block_status(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-4-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11qemu-io: Switch 'alloc' command to byte-based lengthEric Blake
For the 'alloc' command, accepting an offset in bytes but a length in sectors, and reporting output in sectors, is confusing. Do everything in bytes, and adjust the expected output accordingly. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-3-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11qemu-io: Improve alignment checksEric Blake
Several copy-and-pasted alignment checks exist in qemu-io, which could use some minor improvements: - Manual comparison against 0x1ff is not as clean as using our alignment macros (QEMU_IS_ALIGNED) from osdep.h. - The error messages aren't quite grammatically correct. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-2-eblake@redhat.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-11qemu-io-cmds: Use bdrv_coroutine_enterFam Zheng
qemu_coroutine_create associates @co to qemu_aio_context but we poll blk's context below. If the coroutine yields, it may never get resumed again. Use bdrv_coroutine_enter to make sure we are starting the I/O on the right context. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2017-04-03qemu-io-cmds: Assert that global and nofile commands don't use ct->permsPeter Maydell
It would be a bug for a command with the CMD_NOFILE_OK or CMD_FLAG_GLOBAL flags set to also set the ct->perms field, because the former says "OK for a file not to be open" but the latter is a check on a file. Add an assertion in qemuio_add_command() so we can catch that sort of buggy command definition immediately rather than it being a bug that only manifests when a particular set of command line options is used. (Coverity gets confused about this (CID 1371723) and reports that we might dereference a NULL blk pointer in this case, because it can't tell that that code path never happens with the cmdinfo_t that we have. This commit won't help unconfuse it, but it does fix the underlying issue.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1490967529-4767-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-28hmp: Request permissions in qemu-ioKevin Wolf
The HMP command 'qemu-io' is a bit tricky because it wants to work on the original BlockBackend, but additional permissions could be required. The details are explained in a comment in the code, but in summary, just request whatever permissions the current qemu-io command needs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-23util/cutils: Change qemu_strtosz*() from int64_t to uint64_tMarkus Armbruster
This will permit its use in parse_option_size(). Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Return qemu_strtosz*() error and value separatelyMarkus Armbruster
This makes qemu_strtosz(), qemu_strtosz_mebi() and qemu_strtosz_metric() similar to qemu_strtoi64(), except negative values are rejected. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Let qemu_strtosz*() optionally reject trailing crapMarkus Armbruster
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is null and the conversion doesn't consume the string completely. Matches how qemu_strtol() & friends work. Only test_qemu_strtosz_simple() passes a null @endptr. No functional change there, because its conversion consumes the string. Simplify callers that use @endptr only to fail when it doesn't point to '\0' to pass a null @endptr instead. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: New qemu_strtosz()Markus Armbruster
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B. Capture the pattern in new qemu_strtosz(). Inline qemu_strtosz_suffix() into its only remaining caller. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
2017-02-12qemu-io: don't allow I/O operations larger than BDRV_REQUEST_MAX_BYTESAlberto Garcia
Passing a request size larger than BDRV_REQUEST_MAX_BYTES to any of the I/O commands results in an error. While 'read' and 'write' handle the error correctly, 'aio_read' and 'aio_write' hit an assertion: blk_aio_read_entry: Assertion `rwco->qiov->size == acb->bytes' failed. The reason is that the QEMU I/O code cannot handle request sizes larger than BDRV_REQUEST_MAX_BYTES, so this patch makes qemu-io check that all values are within range. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 79f66648c685929a144396bda24d13a207131dcf.1485878688.git.berto@igalia.com [mreitz: Use BDRV_REQUEST_MAX_BYTES instead of INT_MAX] Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2016-10-28 # gpg: Signature made Fri 28 Oct 2016 16:17:51 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (23 commits) Fix build for less common build directories names clean-up: removed duplicate #includes scripts/clean-includes: added duplicate #include check monitor: deprecate 'default' option qemu-ga: Remove stray 'q' in documentation Makefile: Fix help text for target 'installer' s390: avoid always-true comparison in s390_pci_generate_fid() migration: Remove unneeded NULL check from migrate_fd_error() scripts/hxtool: fix undefined behavour of echo qemu-options.hx: set: fix copy-paste error usb: Change *_exitfn return type from int to void MAINTAINERS: qemu-trivial information colo-compare: remove unused struct CompareChardevProps and 'props' variable milkymist-pfpu: fix potential integer overflow hw/block/nvme: Simplify if-statements a little bit target-lm32: rewrite gen_compare() lm32: milkymist-tmu2: fix integer overflow target-lm32: disable asm logging via LOG_DIS() target-lm32: swap operand of wcsr in LOG_DIS() target-lm32: fix LOG_DIS operand order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28clean-up: removed duplicate #includesAnand J
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28qemu-io: acquire AioContextPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1477565348-5458-16-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-28block: prepare bdrv_reopen_multiple to release AioContextPaolo Bonzini
After the next patch bdrv_drain_all will have to be called without holding any AioContext. Prepare to do this by adding an AioContext argument to bdrv_reopen_multiple. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-09-05block: switch blk_write_compressed() to byte-based interfacePavel Butsykin
This is a preparatory patch, which continues the general trend of the transition to the byte-based interfaces. bdrv_check_request() and blk_check_request() are no longer used, thus we can remove them. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-20block: Convert BB interface to byte-based discardsEric Blake
Change sector-based blk_discard(), blk_co_discard(), and blk_aio_discard() to instead be byte-based blk_pdiscard(), blk_co_pdiscard(), and blk_aio_pdiscard(). NBD gets a lot simpler now that ignoring the unaligned portion of a byte-based discard request is handled under the hood by the block layer. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-6-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-13qemu-io: Use correct range limitationsMax Reitz
create_iovec() has a comment lamenting the lack of SIZE_T_MAX. Since there actually is a SIZE_MAX, use it. Two places use INT_MAX for checking the upper bound of a sector count that is used as an argument for a blk_*() function (blk_discard() and blk_write_compressed(), respectively). BDRV_REQUEST_MAX_SECTORS should be used instead. And finally, do_co_pwrite_zeroes() used to similarly check that the sector count does not exceed INT_MAX. However, this function is now backed by blk_co_pwrite_zeroes() which takes bytes as an argument instead of sectors. Therefore, it should be the byte count that does not exceed INT_MAX, not the sector count. Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-25block: Rename blk_write_zeroes()Eric Blake
Commit 983a1600 changed the semantics of blk_write_zeroes() to be byte-based rather than sector-based, but did not change the name, which is an open invitation for other code to misuse the function. Renaming to pwrite_zeroes() makes it more in line with other byte-based interfaces, and will help make it easier to track which remaining write_zeroes interfaces still need conversion. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-05-19qemu-iotests: Fix regression in 136 on aio_read invalidEric Blake
Commit 093ea232 removed the ability for aio_read and aio_write to artificially inflate the invalid statistics counters for block devices, since it no longer flags unaligned offset or length. Add 'aio_read -i' and 'aio_write -i' to restore the ability, and update test 136 to use it. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1463416983-28318-4-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-19qemu-io: Fix recent UI updatesEric Blake
Commit 770e0e0e [*] tried to add 'writev -f', but didn't tweak the getopt() call to actually let it work. Likewise, commit c2e001c missed implementing 'aio_write -u -z'. The latter commit also introduced a leak of ctx. [*] does it sound "ech0e" in here? :) Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1463416983-28318-2-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-19block: Remove bdrv_aio_multiwrite()Kevin Wolf
Since virtio-blk implements request merging itself these days, the only remaining users are test cases for the function. That doesn't make the function exactly useful any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-05-12qemu-io: Add 'write -z -u' to test MAY_UNMAP flagEric Blake
Make it easier to control whether the BDRV_REQ_MAY_UNMAP flag can be passed through a write_zeroes command, by adding the '-u' flag to qemu-io 'write -z' and 'aio_write -z'. To be useful, the device has to be opened with BDRV_O_UNMAP (done by default in qemu-io, but can be made explicit with '-d unmap'). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1462677405-4752-7-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-io: Add 'write -f' to test FUA flagEric Blake
Make it easier to test block drivers with BDRV_REQ_FUA in .supported_write_flags, by adding the '-f' flag to qemu-io to conditionally pass the flag through to specific writes ('write', 'write -z', 'writev', 'aio_write', 'aio_write -z'). You'll want to use 'qemu-io -t none' to actually make -f useful (as otherwise, the default writethrough mode automatically sets the FUA bit on every write). Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1462677405-4752-6-git-send-email-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-io: Allow unaligned access by defaultEric Blake
There's no reason to require the user to specify a flag just so they can pass in unaligned numbers. Keep 'read -p' and 'write -p' as no-ops so that I don't have to hunt down and update all users of qemu-io, but otherwise make their behavior default as 'read' and 'write'. Also fix 'write -z', 'readv', 'writev', 'writev', 'aio_read', 'aio_write', and 'aio_write -z'. For now, 'read -b', 'write -b', and 'write -c' still require alignment (and 'multiwrite', but that's slated to die soon). qemu-iotest 23 is updated to match, as the only test that was previously explicitly expecting an error on an unaligned request. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1462677405-4752-5-git-send-email-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-io: Use bool for command line flagsEric Blake
We require a C99 compiler; let's use it to express what we really mean. (Yes, we now have an instance of 'if (bool + bool + bool > 1)', which, although semantically valid C, looks ugly; it gets cleaned up later.) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1462677405-4752-4-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-io: Switch to byte-based block accessEric Blake
qemu-io is the last user of several sector-based interfaces. This patch upgrades to the new interfaces under the hood, then deletes the resulting dead code. Note that for maximum back-compat, while the -p option is no longer required to get blk_pread(), it is still needed to allow for unaligned access; this is because qemu-iotest 23 relies on qemu-io rejecting unaligned accesses without -p. A later patch may clean up the interface to be more user-friendly, but it's better to separate what's done under the hood from what the user sees. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: Switch blk_*write_zeroes() to byte interfaceEric Blake
Sector-based blk_write() should die; convert the one-off variant blk_write_zeroes() to use an offset/count interface instead. Likewise for blk_co_write_zeroes() and blk_aio_write_zeroes(). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: Allow BDRV_REQ_FUA through blk_pwrite()Eric Blake
We have several block drivers that understand BDRV_REQ_FUA, and emulate it in the block layer for the rest by a full flush. But without a way to actually request BDRV_REQ_FUA during a pass-through blk_pwrite(), FUA-aware block drivers like NBD are forced to repeat the emulation logic of a full flush regardless of whether the backend they are writing to could do it more efficiently. This patch just wires up a flags argument; followup patches will actually make use of it in the NBD driver and in qemu-io. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12qemu-io: Fix memory leak in 'aio_write -z'Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-04-15qemu-io: Support 'aio_write -z'Kevin Wolf
This allows testing blk_aio_write_zeroes(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Remove BDRV_O_CACHE_WBKevin Wolf
The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-io: Use bdrv_parse_cache_mode() in reopen_f()Kevin Wolf
We must forbid changing the WCE flag in bdrv_reopen() in the same patch, as otherwise the behaviour would change so that the flag takes precedence over the explicitly specified option. The correct value of the WCE flag depends on the BlockBackend user (e.g. guest device) and isn't a decision that the QMP client makes, so this change is what we want. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-20block: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12qemu-io: Account for failed, invalid and flush operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 78a7662a8636e55991737ece50003a2dc5a5f3e0.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11qemu-io: Correct error messagesJohn Snow
Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11qemu-io: Check for trailing charsJohn Snow
Make sure there's not trailing garbage, e.g. "64k-whatever-i-want-here" Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11qemu-io: fix cvtnum lval typesJohn Snow
cvtnum() returns int64_t: we should not be storing this result inside of an int. In a few cases, we need an extra sprinkling of error handling where we expect to pass this number on towards a function that expects something smaller than int64_t. Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-25utils: rename strtosz to use qemu prefixMarc-André Lureau
Not only it makes sense, but it gets rid of checkpatch warning: WARNING: consider using qemu_strtosz in preference to strtosz Also remove get rid of tabs to please checkpatch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-14qemu-io: Add command 'reopen'Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-22qemu-io: Use getopt() correctlyEric Blake
POSIX says getopt() returns -1 on completion. While Linux happens to define EOF as -1, this definition is not required by POSIX, and there may be platforms where checking for EOF instead of -1 would lead to an infinite loop. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-16qemu-io: Use BlockBackendMax Reitz
qemu-io should behave like a guest, therefore it should use BlockBackend to access the block layer. There are a couple of places where that is infeasible: First, the bdrv_debug_* functions could theoretically be mirrored in the BlockBackend, but since these are functions internal to the block layer, they should not be visible externally (qemu-io as a test tool is exempt from this). Second, bdrv_get_info() and bdrv_get_specific_info() work on a single BDS alone, therefore they should stay BDS-specific. Third, bdrv_is_allocated() mainly works on a single BDS as well. Some data may be passed through from the BDS's file (if sectors which are apparently allocated in the file are not really allocated there but just zero). [Fixed conflicts around block_acct_start() usage from Fam Zheng's "qemu-io: Account IO by aio_read and aio_write" commit. Use BlockBackend and blk_get_stats() instead of BlockDriverState. --Stefan] Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423162705-32065-14-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qemu-io: Account IO by aio_read and aio_writeFam Zheng
This will enable accounting of aio requests issued from qemu-io aio read/write commands. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1422586186-9925-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 05:27:39 +0000