Age | Commit message (Collapse) | Author |
|
into staging
Clean up around error_get_pretty(), qerror_report_err()
# gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-02-18:
qemu-char: Avoid qerror_report_err() outside QMP command handlers
qemu-img: Avoid qerror_report_err() outside QMP command handlers
vl: Avoid qerror_report_err() outside QMP command handlers
tpm: Avoid qerror_report_err() outside QMP command handlers
numa: Avoid qerror_report_err() outside QMP command handlers
net: Avoid qerror_report_err() outside QMP command handlers
monitor: Avoid qerror_report_err() outside QMP command handlers
monitor: Clean up around monitor_handle_fd_param()
error: Use error_report_err() where appropriate
error: New convenience function error_report_err()
vhost-scsi: Improve error reporting for invalid vhostfd
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Coccinelle semantic patch:
@@
expression E;
@@
- error_report("%s", error_get_pretty(E));
- error_free(E);
+ error_report_err(E);
@@
expression E, S;
@@
- error_report("%s", error_get_pretty(E));
+ error_report_err(E);
(
exit(S);
|
abort();
)
Trivial manual touch-ups in block/sheepdog.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Although qemu-img already creates BlockBackends, it does not do accesses
to the images through them. This patch converts all of the bdrv_* calls
for which this is currently possible to blk_* calls. Most of the
remaining calls will probably stay bdrv_* calls because they really do
operate on the BDS level instead of the BB level.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-10-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The argument given to bdrv_find_protocol() is just a file name, which
makes it difficult for the caller to reconstruct what protocol
bdrv_find_protocol() was hoping to find. This patch adds an Error
parameter to that function to solve this issue.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If -n is specified, it does not matter whether the output format and
protocol support image creation; building the creation options should
simply be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423666727-20777-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This is the same way vl.c handles this.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The string field entries 'filename', 'backing_file', and
'exact_filename' in the BlockDriverState struct are defined as 1024
bytes.
However, many places that use these values accept a maximum of PATH_MAX
bytes, so we have a mixture of 1024 byte and PATH_MAX byte allocations.
This patch makes the BlockDriverStruct field string sizes match usage.
This patch also does a few fixes related to the size that needs to
happen now:
* the block qapi driver is updated to use PATH_MAX bytes
* the qcow and qcow2 drivers have an additional safety check
* the block vvfat driver is updated to use PATH_MAX bytes
for the size of backing_file, for systems where PATH_MAX is < 1024
bytes.
* qemu-img uses PATH_MAX rather than 1024. These instances were not
changed to be dynamically allocated, however, as the extra
temporary 3K in stack usage for qemu-img does not seem worrisome.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The image options which can be amended are described by the .create_opts
field for every driver. This field must therefore be non-NULL so that
anything can be amended in the first place. Check that this holds true
before going into qemu_opts_create() (because if .create_opts is NULL,
the create_opts pointer in img_amend() will be NULL after
qemu_opts_append()).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL for the target image in qemu-img convert, which is
important so that the create_opts pointer in img_convert() is not NULL
after the qemu_opts_append() calls and when going into
qemu_opts_create().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
img_open() already prints an error if the operation failed, so there
should not be another error_report() afterwards.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
As soon as options is set in img_amend(), it needs to be freed before
the function returns. This leak is rather insignificant, as qemu-img
will exit subsequently anyway, but there's no point in not fixing it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Message-id: 1414404776-4919-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Now that bdrv_amend_options() supports a status callback, use it to
display a progress report.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Introduce a new parameter for qemu-img commit which may be used to
explicitly specify the backing file into which an image should be
committed if the backing chain has more than a single layer.
[Applied Eric Blake's qemu-img.texi documentation rewording
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-12-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Implement progress output for the commit command by querying the
progress of the block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-11-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
After the top image has been committed, it should be emptied unless
specified otherwise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-10-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
qemu-img should use QMP commands whenever possible in order to ensure
feature completeness of both online and offline image operations. As
qemu-img itself has no access to QMP (since this would basically require
just everything being linked into qemu-img), imitate QMP's
implementation of block-commit by using commit_active_start() and then
waiting for the block job to finish.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Currently, if bdrv_check() fails either by returning -errno or having
check_errors set, qemu-img check just exits with 1 after having told the
user that there were no errors on the image. This is bad.
Instead of printing the check result if there were internal errors which
were so bad that bdrv_check() could not even complete with 0 as a return
value, qemu-img check should inform the user about the error.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
On BlockBackend destruction, unref its BlockDriverState. Replaces the
callers' unrefs.
This turns the pointer from BlockBackend to BlockDriverState into a
strong reference, managed with bdrv_ref() / bdrv_unref(). The
back-pointer remains weak.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState. Callers have to unref both. The commit after next
will relieve them of the need to unref the BlockDriverState.
Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon(). To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del(). Unfortunately, hiding turns the
BlockBackend's name into the empty string. Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Creating an anonymous BDS can't fail. Make that obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The device_name of a BlockDriverState is currently checked because it is
always used as a QemuOpts ID and qemu_opts_create() checks whether such
IDs are wellformed.
node-name is supposed to share the same namespace, but it isn't checked
currently. This patch adds explicit checks both for device_name and
node-name so that the same rules will still apply even if QemuOpts won't
be used any more at some point.
qemu-img used to use names with spaces in them, which isn't allowed any
more. Replace them with underscores.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
On a system with a low limit of open files the initialization
of the event notifier could fail and QEMU exits without printing any
error information to the user.
The problem can be easily reproduced by enforcing a low limit of open
files and start QEMU with enough I/O threads to hit this limit.
The same problem raises, without the creation of I/O threads, while
QEMU initializes the main event loop by enforcing an even lower limit of
open files.
This commit adds an error message on failure:
# qemu [...] -object iothread,id=iothread0 -object iothread,id=iothread1
qemu: Failed to initialize event notifier: Too many open files in system
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The source cache option takes the same values as the cache option. The
documentation reads a little strange because it starts with "In contrast
the src_cache option ...". The fact that this is comparing with the
previous documented option (the 'cache' option) is implicit. Readers
may be confused, especially if they jump to src_cache without reading
cache documentation first.
Suggested-by: Jeff Nelson <jenelson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
The out label has the qemu_progress_end() and other cleanup calls.
Always goto out in error paths so the cleanup happens. These error
paths now return 1 instead of -1.
Note that bdrv_unref(NULL) is safe. We just need to initialize bs to
NULL at the top of the function.
We can now remove the obsolete bs_old_backing = NULL and bs_new_backing
= NULL for safe mode. Originally it was necessary in commit 3e85c6fd
("qemu-img rebase") but became useless in commit c2abcce ("qemu-img:
avoid calling exit(1) to release resources properly") because the
variables are already initialized during declaration.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
If img_compare() fails to parse the cache flags the goto out3 code path
will call qemu_progress_end(). Make sure we actually call
qemu_progress_init() first.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
The img_commit() return value is a process exit code. Use 1 for failure
instead of -1. The other failure paths in this function already use 1.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This reverts commit 1a443c1b8b4314d365e82bddeb1de5b4b1c15fb3 and the
later commit 395071a76328189f50c778f4dee6dabb90503dd9.
GSequence was introduced in glib 2.14. RHEL 5 fails to compile since it
uses glib 2.12.3.
Now that bdrv_iterate_format() invokes the iteration callback in sorted
order these commits are unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
|
|
qemu-img amend may extensively modify the target image, depending on the
options to be amended (e.g. conversion to qcow2 compat level 0.10 from
1.1 for an image with many unallocated zero clusters). Therefore it
makes sense to allow the user to specify the cache mode to be used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Many qemu-img subcommands only read the source file(s) once. For these
use cases, a full write-back cache is unnecessary and mainly clutters
host cache memory. Though this is generally no concern as cache memory
is freely available and can be scaled by the host OS, it may become a
concern with thin provisioning.
For these cases, it makes sense to allow users to freely specify the
source cache mode (e.g. use no cache at all).
This commit adds a new switch (-T) for the qemu-img subcommands check,
compare, convert and rebase to specify the cache to be used for source
images (the backing file in case of rebase).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block patches
# gpg: Signature made Fri 15 Aug 2014 14:07:42 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (59 commits)
block: Catch !bs->drv in bdrv_check()
iotests: Add test for image header overlap
qcow2: Catch !*host_offset for data allocation
qcow2: Return useful error code in refcount_init()
mirror: Handle failure for potentially large allocations
vpc: Handle failure for potentially large allocations
vmdk: Handle failure for potentially large allocations
vhdx: Handle failure for potentially large allocations
vdi: Handle failure for potentially large allocations
rbd: Handle failure for potentially large allocations
raw-win32: Handle failure for potentially large allocations
raw-posix: Handle failure for potentially large allocations
qed: Handle failure for potentially large allocations
qcow2: Handle failure for potentially large allocations
qcow1: Handle failure for potentially large allocations
parallels: Handle failure for potentially large allocations
nfs: Handle failure for potentially large allocations
iscsi: Handle failure for potentially large allocations
dmg: Handle failure for potentially large allocations
curl: Handle failure for potentially large allocations
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
bdrv_get_geometry() hides errors. Use bdrv_nb_sectors() or
bdrv_getlength() instead where that's obviously inappropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Chiefly so I don't have to do the error checking in quadruplicate in
the next commit. Moreover, replacing the frequently updated
bs_sectors by an array assigned just once makes the code easier to
understand.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Instead of bdrv_getlength(). Replace variable output_length by
output_sectors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
getchar() is a standard c library function which may return with failure
(e.g. -1), so like another platforms, also need check it under WIN32.
And make the related code match current qemu code styles, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
In this case, 'ret' is already '-1', so need not do it again.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The exit code 63 (check not supported by image format) was not even
documented in the comment above the check command in the source code;
add it, as it does indeed seem useful.
Also, document all of check's exit codes in the manpage.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
img_check() should report that the format of the given image does not
support checks even if JSON output is desired. JSON data is output to
stdout, as opposed to error messages, which are (in the case of
qemu-img) printed to stderr. Therefore, it is easy to distinguish
between the two.
Also, img_info() does already use error_report() for human-readable
messages even though JSON output is desired (through
collect_image_info_list()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Introduced in commit 661a0f7. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Introduced in commit a283cb6; mostly harmless. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
g_sequence_lookup is not supported by glib < 2.28. The usage
of g_sequence_lookup is not essential in this context (it's a
safeguard against duplicate values in the help message).
Removing the call enables the build on all platforms and
does not change the operation of the help function.
Signed-off-by: Mike Day <ncmike@ncultra.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If target block driver forces compression, qemu-img convert needs to
write by cluster size as well as "-c" option.
Particularly, this applies for converting to VMDK streamOptimized
format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The help message for qemu-img lists the supported block formats, of
which there are 27 as of version 2.0.50. The formats are printed in
the order of their driver's position in a linked list, which appears
random. This patch prints the formats in sorted order, making it
easier to read and to find a specific format in the list.
[Added suggestions from Fam Zheng <famz@redhat.com> to declare variables
at the top of the scope in help() and to omit explicit cast for void*
opaque.
--Stefan]
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|