aboutsummaryrefslogtreecommitdiff
path: root/qemu-img.c
AgeCommit message (Collapse)Author
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-02qemu-img: Make MapEntry a QAPI structFam Zheng
The "flags" bit mask is expanded to two booleans, "data" and "zero"; "bs" is replaced with "filename" string. Refactor the merge conditions in img_map() into entry_mergeable(). Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-16-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02qemu-img: In "map", use the returned "file" from bdrv_get_block_statusFam Zheng
Now all drivers should return a correct "file", we can make use of it, even with the recursion into backing chain above. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-15-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block: Add "file" output parameter to block status query functionsFam Zheng
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-20block: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20qemu-img: Speed up comparing empty/zero imagesFam Zheng
Two empty raw files are always compared by actually reading data even if there is no data, because BDRV_BLOCK_ZERO is considered "allocated" in bdrv_is_allocated_above(). That is inefficient. Use bdrv_get_block_status_above() for more information, and skip the consecutive zero sectors. This brings a huge speed up in comparing sparse/empty raw images: $ qemu-img create a 1G $ time ~/build/master/bin/qemu-img compare a a Images are identical. real 0m6.583s user 0m0.191s sys 0m6.367s $ time qemu-img compare a a Images are identical. real 0m0.033s user 0m0.003s sys 0m0.031s Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-13error: Use error_reportf_err() where it makes obvious senseMarkus Armbruster
Done with this Coccinelle semantic patch @@ expression FMT, E, S; expression list ARGS; @@ - error_report(FMT, ARGS, error_get_pretty(E)); + error_reportf_err(E, FMT/*@@@*/, ARGS); ( - error_free(E); | exit(S); | abort(); ) followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings. We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13error: Don't decorate original error message when adding to itMarkus Armbruster
Prepend the additional information, colon, space to the original message without enclosing it in parenthesis or quotes, like we do elsewhere. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
2015-12-18qemu-img: abort when full_backing_filename not presentJohn Snow
...But only if we have the backing_filename. It means something Scary happened and we can't really be quite exactly sure if we can trust the backing_filename. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1450122916-4706-5-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Add opaque value to the amend CBMax Reitz
Add an opaque value which is to be passed to the bdrv_amend_options() status callback. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Introduce reference count and fix reference to job->bsFam Zheng
Add reference count to block job, meanwhile move the ownership of the reference to job->bs from the caller (which is released in two completion callbacks) to the block job itself. It is necessary for block_job_complete_sync to work, because block job shouldn't live longer than its bs, as asserted in bdrv_delete. Now block_job_complete_sync can be simplified. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11qemu-img: add check for zero-length job lenJohn Snow
The mirror job doesn't update its total length until it has already started running, so we should translate a zero-length job-len as meaning 0%. Otherwise, we may get divide-by-zero faults. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-16block: Add and use bdrv_replace_in_backing_chain()Kevin Wolf
This cleans up the mess we left behind in the mirror code after the previous patch. Instead of using bdrv_swap(), just change pointers. The interface change of the mirror job that callers must consider is that after job completion, their local BDS pointers still point to the same node now. qemu-img must change its code accordingly (which makes it easier to understand); the other callers stays unchanged because after completion they don't do anything with the BDS, but just with the job, and the job is still owned by the source BDS. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Convert bs->backing_hd to BdrvChildKevin Wolf
This is the final step in converting all of the BlockDriverState pointers that block drivers use to BdrvChild. After this patch, bs->children contains the full list of child nodes that are referenced by a given BDS, and these children are only referenced through BdrvChild, so that updating the pointer in there is enough for changing edges in the graph. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-25utils: rename strtosz to use qemu prefixMarc-André Lureau
Not only it makes sense, but it gets rid of checkpatch warning: WARNING: consider using qemu_strtosz in preference to strtosz Also remove get rid of tabs to please checkpatch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-04qemu-img: Fix crash in amend invocationMax Reitz
Example: $ ./qemu-img create -f qcow2 /tmp/t.qcow2 64M $ ./qemu-img amend -f qcow2 -o backing_file=/tmp/t.qcow2, -o help \ /tmp/t.qcow2 This should not crash. This actually is tested by iotest 082, but not caught due to the segmentation fault being silent (which is something that needs to be fixed, too). Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-22util: move read_password method out of qemu-img into osdep/oslibDaniel P. Berrange
The qemu-img.c file has a read_password() method impl that is used to prompt for passwords on the console, with impls for POSIX and Windows. This will be needed by qemu-io.c too, so move it into the QEMU osdep/oslib files where it can be shared without code duplication Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qemu-img convert: Rewrite copying logicKevin Wolf
The implementation of qemu-img convert is (a) messy, (b) buggy, and (c) less efficient than possible. The changes required to beat some sense into it are massive enough that incremental changes would only make my and the reviewers' life harder. So throw it away and reimplement it from scratch. Let me give some examples what I mean by messy, buggy and inefficient: (a) The copying logic of qemu-img convert has two separate branches for compressed and normal target images, which roughly do the same - except for a little code that handles actual differences between compressed and uncompressed images, and much more code that implements just a different set of optimisations and bugs. This is unnecessary code duplication, and makes the code for compressed output (unsurprisingly) suffer from bitrot. The code for uncompressed ouput is run twice to count the the total length for the progress bar. In the first run it just takes a shortcut and runs only half the loop, and when it's done, it toggles a boolean, jumps out of the loop with a backwards goto and starts over. Works, but pretty is something different. (b) Converting while keeping a backing file (-B option) is broken in several ways. This includes not writing to the image file if the input has zero clusters or data filled with zeros (ignoring that the backing file will be visible instead). It also doesn't correctly limit every iteration of the copy loop to sectors of the same status so that too many sectors may be copied to in the target image. For -B this gives an unexpected result, for other images it just does more work than necessary. Conversion with a compressed target completely ignores any target backing file. (c) qemu-img convert skips reading and writing an area if it knows from metadata that copying isn't needed (except for the bug mentioned above that ignores a status change in some cases). It does, however, read from the source even if it knows that it will read zeros, and then search for non-zero bytes in the read buffer, if it's possible that a write might be needed. This reimplementation of the copying core reorganises the code to remove the duplication and have a much more obvious code flow, by essentially splitting the copy iteration loop into three parts: 1. Find the number of contiguous sectors of the same status at the current offset (This can also be called in a separate loop before the copying loop in order to determine the total sectors for the progress bar.) 2. Read sectors. If the status implies that there is no data there to read (zero or unallocated cluster), don't do anything. 3. Write sectors depending on the status. If it's data, write it. If we want the backing file to be visible (with -B), don't write it. If it's zeroed, skip it if you can, otherwise use bdrv_write_zeroes() to optimise the write at least where possible. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-03-16qemu-img: Avoid qerror_report_err() outside QMP handlers, againMarkus Armbruster
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. Replace by error_report_err(). Commit 6936f29 cleaned that up in qemu-img.c, but two calls have crept in since. Take care of them the same way. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-16qemu-img: Fix convert, amend error messages for unknown optionsMarkus Armbruster
Message quality regressed in commit dc523cd. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10fix GCC 5.0.0 logical-not-parentheses warningsRadim Krčmář
man gcc: Warn about logical not used on the left hand side operand of a comparison. This option does not warn if the RHS operand is of a boolean type. By preferring bool over int where sensible, but without modifying any depending code, make GCC happy in cases like this, qemu-img.c: In function ‘compare_sectors’: qemu-img.c:992:39: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses] if (!!memcmp(buf1, buf2, 512) != res) { hw/ide/core.c:1836 doesn't throw an error, assert(!!s->error == !!(s->status & ERR_STAT)); even thought the second operand is int (and first hunk of this patch has a very similar case), maybe GCC developers still have a little faith in C programmers. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10block: remove superfluous '\n' around error_report/error_setgGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-26qemu-img: Suppress unhelpful extra errors in convert, amendMarkus Armbruster
img_convert() and img_amend() use qemu_opts_do_parse(), which reports errors with qerror_report_err(). Its error messages aren't helpful here, the caller reports one that actually makes sense. Reproducer: $ qemu-img convert -o backing_format=raw in.img out.img qemu-img: Invalid parameter 'backing_format' qemu-img: Invalid options for file format 'raw' To fix, propagate errors through qemu_opts_do_parse(). This lifts the error reporting into callers. Drop it from img_convert() and img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create(). Since I'm touching qemu_opts_do_parse() anyway, write a function comment for it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix useMarkus Armbruster
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the error with qerror_report_err(). Most of its users assume the function can't fail. Make them use qemu_opt_set_err() with &error_abort, so that should the assumption ever break, it'll break noisily. Just two users remain, in util/qemu-config.c. Switch them to qemu_opt_set_err() as well, then rename qemu_opt_set_err() to qemu_opt_set(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26qemu-img: Suppress unhelpful extra errors in convert, resizeMarkus Armbruster
add_old_style_options() for img_convert() and img_resize() use qemu_opt_set(), which reports errors with qerror_report_err(). Its error messages aren't helpful here, the caller reports one that actually makes sense. Reproducer: $ qemu-img convert -B raw in.img out.img qemu-img: Invalid parameter 'backing_file' qemu-img: Backing file not supported for file format 'raw' Switch to qemu_opt_set_err() to get rid of the unwanted messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26QemuOpts: Convert qemu_opt_set_number() to Error, fix its useMarkus Armbruster
Return the Error object instead of reporting it with qerror_report_err(). Change callers that assume the function can't fail to pass &error_abort, so that should the assumption ever break, it'll break noisily. Turns out all callers outside its unit test assume that. We could drop the Error ** argument, but that would make the interface less regular, so don't. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' ↵Peter Maydell
into staging Clean up around error_get_pretty(), qerror_report_err() # gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-02-18: qemu-char: Avoid qerror_report_err() outside QMP command handlers qemu-img: Avoid qerror_report_err() outside QMP command handlers vl: Avoid qerror_report_err() outside QMP command handlers tpm: Avoid qerror_report_err() outside QMP command handlers numa: Avoid qerror_report_err() outside QMP command handlers net: Avoid qerror_report_err() outside QMP command handlers monitor: Avoid qerror_report_err() outside QMP command handlers monitor: Clean up around monitor_handle_fd_param() error: Use error_report_err() where appropriate error: New convenience function error_report_err() vhost-scsi: Improve error reporting for invalid vhostfd Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-18qemu-img: Avoid qerror_report_err() outside QMP command handlersMarkus Armbruster
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. Replace by error_report_err(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18error: Use error_report_err() where appropriateMarkus Armbruster
Coccinelle semantic patch: @@ expression E; @@ - error_report("%s", error_get_pretty(E)); - error_free(E); + error_report_err(E); @@ expression E, S; @@ - error_report("%s", error_get_pretty(E)); + error_report_err(E); ( exit(S); | abort(); ) Trivial manual touch-ups in block/sheepdog.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-16qemu-img: Use BlockBackend as far as possibleMax Reitz
Although qemu-img already creates BlockBackends, it does not do accesses to the images through them. This patch converts all of the bdrv_* calls for which this is currently possible to blk_* calls. Most of the remaining calls will probably stay bdrv_* calls because they really do operate on the BDS level instead of the BB level. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423162705-32065-10-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qemu-img: Use blk_new_open() in img_rebase()Max Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423162705-32065-9-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qemu-img: Use blk_new_open() in img_open()Max Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423162705-32065-8-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16block: Add Error parameter to bdrv_find_protocol()Max Reitz
The argument given to bdrv_find_protocol() is just a file name, which makes it difficult for the caller to reconstruct what protocol bdrv_find_protocol() was hoping to find. This patch adds an Error parameter to that function to solve this issue. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423162705-32065-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qemu-img: Fix qemu-img convert -nMax Reitz
If -n is specified, it does not matter whether the output format and protocol support image creation; building the creation options should simply be skipped. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423666727-20777-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06qemu-img: Add QEMU_PKGVERSION to QEMU_IMG_VERSIONDon Slutz
This is the same way vl.c handles this. Signed-off-by: Don Slutz <dslutz@verizon.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: update string sizes for filename,backing_file,exact_filenameJeff Cody
The string field entries 'filename', 'backing_file', and 'exact_filename' in the BlockDriverState struct are defined as 1024 bytes. However, many places that use these values accept a maximum of PATH_MAX bytes, so we have a mixture of 1024 byte and PATH_MAX byte allocations. This patch makes the BlockDriverStruct field string sizes match usage. This patch also does a few fixes related to the size that needs to happen now: * the block qapi driver is updated to use PATH_MAX bytes * the qcow and qcow2 drivers have an additional safety check * the block vvfat driver is updated to use PATH_MAX bytes for the size of backing_file, for systems where PATH_MAX is < 1024 bytes. * qemu-img uses PATH_MAX rather than 1024. These instances were not changed to be dynamically allocated, however, as the extra temporary 3K in stack usage for qemu-img does not seem worrisome. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-img: Check create_opts before image amendmentMax Reitz
The image options which can be amended are described by the .create_opts field for every driver. This field must therefore be non-NULL so that anything can be amended in the first place. Check that this holds true before going into qemu_opts_create() (because if .create_opts is NULL, the create_opts pointer in img_amend() will be NULL after qemu_opts_append()). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-img: Check create_opts before image creationMax Reitz
If a driver supports image creation, it needs to set the .create_opts field. We can use that to make sure .create_opts for both drivers involved is not NULL for the target image in qemu-img convert, which is important so that the create_opts pointer in img_convert() is not NULL after the qemu_opts_append() calls and when going into qemu_opts_create(). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-06qemu-img: Omit error_report() after img_open()Max Reitz
img_open() already prints an error if the operation failed, so there should not be another error_report() afterwards. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-03qemu-img: Fix insignificant memleakMax Reitz
As soon as options is set in img_amend(), it needs to be freed before the function returns. This leak is rather insignificant, as qemu-img will exit subsequently anyway, but there's no point in not fixing it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Message-id: 1414404776-4919-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Add progress output for amendMax Reitz
Now that bdrv_amend_options() supports a status callback, use it to display a progress report. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414404776-4919-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03block: Add status callback to bdrv_amend_options()Max Reitz
Depending on the changed options and the image format, bdrv_amend_options() may take a significant amount of time. In these cases, a way to be informed about the operation's status is desirable. Since the operation is rather complex and may fundamentally change the image, implementing it as AIO or a coroutine does not seem feasible. On the other hand, implementing it as a block job would be significantly more difficult than a simple callback and would not add benefits other than progress report to the amending operation, because it should not actually be run as a block job at all. A callback may not be very pretty, but it's very easy to implement and perfectly fits its purpose here. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Specify backing file for commitMax Reitz
Introduce a new parameter for qemu-img commit which may be used to explicitly specify the backing file into which an image should be committed if the backing chain has more than a single layer. [Applied Eric Blake's qemu-img.texi documentation rewording --Stefan] Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1414159063-25977-12-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Enable progress output for commitMax Reitz
Implement progress output for the commit command by querying the progress of the block job. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-11-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Empty image after commitMax Reitz
After the top image has been committed, it should be emptied unless specified otherwise. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-10-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Implement commit like QMPMax Reitz
qemu-img should use QMP commands whenever possible in order to ensure feature completeness of both online and offline image operations. As qemu-img itself has no access to QMP (since this would basically require just everything being linked into qemu-img), imitate QMP's implementation of block-commit by using commit_active_start() and then waiting for the block job to finish. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1414159063-25977-9-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-23qemu-img: Print error if check failedMax Reitz
Currently, if bdrv_check() fails either by returning -errno or having check_errors set, qemu-img check just exits with 1 after having told the user that there were no errors on the image. This is bad. Instead of printing the check result if there were internal errors which were so bad that bdrv_check() could not even complete with 0 as a return value, qemu-img check should inform the user about the error. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>