aboutsummaryrefslogtreecommitdiff
path: root/qemu-doc.texi
AgeCommit message (Collapse)Author
2012-02-09iSCSI: add configuration variables for iSCSIRonnie Sahlberg
This patch adds configuration variables for iSCSI to set initiator-name to use when logging in to the target, which type of header-digest to negotiate with the target and username and password for CHAP authentication. This allows specifying a initiator-name either from the command line -iscsi initiator-name=iqn.2004-01.com.example:test or from a configuration file included with -readconfig [iscsi] initiator-name = iqn.2004-01.com.example:test header-digest = CRC32C|CRC32C-NONE|NONE-CRC32C|NONE user = CHAP username password = CHAP password If you use several different targets, you can also configure this on a per target basis by using a group name: [iscsi "iqn.target.name"] ... The configuration file can be read using -readconfig. Example : qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.ronnie.test/1 -readconfig iscsi.conf Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-14doc: Remove Symbian Virtual PlatformStefan Weil
Commit d396a657baec8c6b7aa0c888746e0e2f78303650 removed the code for SVP, so the documentation needs this update. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-18Merge remote-tracking branch 'kwolf/block-stable' into stagingAnthony Liguori
2011-11-18Documentation: Add section about iSCSI LUNS to qemu-docRonnie Sahlberg
Add a new section about using iSCSI LUNs with qemu and provide a short example on how to set up a target and access it using the built-in initiator Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-17Fix spelling in documentation and comments (similiar -> similar)Stefan Weil
This bug was detected by codespell. In mips_mipssim.c a grammatical error was fixed, too. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-26Documentation: fix typoBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-15target-xtensa: update qemu-doc.texiMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-05sdl: Add zoom hot keysJan Kiszka
Allow to enlarge or shrink the screen via CTRL-ALT-+/-. In contrast to scaling the window, these controls always preserve the aspect ratio of the current console. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-05-15doc: Add explanation that -alt-grab and -ctrl-grab affect special keysBrad Hards
Phillip Merensky reported that the special keys (e.g. Ctrl-Alt-f for full screen) did not work correctly if -alt-grab is used. BUG: 696530 Review of ui/sdl.c:sdl_refresh indicates that this is the intended behaviour, so we should update the documentation to match the actual behaviour, as suggested by Phillip in the bug report. Signed-off-by: Brad Hards <bradh@frogmouth.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-07Documentation: add Sheepdog disk imagesMORITA Kazutaka
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-20Add scripts directoryBlue Swirl
Move build and user scripts into scripts directory. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-09qemu-doc: Spelling fixesStefan Weil
neccessary -> necessary Keberos -> Kerberos emuilated -> emulated transciever -> transceiver emulaton -> emulation inital -> initial MingGW -> MinGW Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-09qemu-doc: Add missing blanksStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-09qemu-doc: Add missing menu entryStefan Weil
Each @section should have a menu entry and a @node entry. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-09qemu-doc: Clean whitespaceStefan Weil
Remove blanks at line endings. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-11-02intel-hda: documentation updateGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2010-10-05Add new user mode option -ignore-environmentStefan Weil
An empty environment is sometimes useful in user mode. The new option provides it for linux-user and bsd-user (darwin-user still has no environment related options). The patch also adds the documentation for other environment related options. Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2010-08-30nbd: Introduce NBD named exports.Laurent Vivier
This patch allows to connect Qemu using NBD protocol to an nbd-server using named exports. For instance, if on the host "isoserver", in /etc/nbd-server/config, you have: [generic] [debian-500-ppc-netinst] exportname = /ISO/debian-500-powerpc-netinst.iso [Fedora-10-ppc-netinst] exportname = /ISO/Fedora-10-ppc-netinst.iso You can connect to it, using: qemu -cdrom nbd:isoserver:exportname=debian-500-ppc-netinst qemu -cdrom nbd:isoserver:exportname=Fedora-10-ppc-netinst NOTE: you need at least nbd-server 2.9.18 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-10RESEND: Inter-VM shared memory PCI deviceCam Macdonell
resend for bug fix related to removal of irqfd Support an inter-vm shared memory device that maps a shared-memory object as a PCI device in the guest. This patch also supports interrupts between guest by communicating over a unix domain socket. This patch applies to the qemu-kvm repository. -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>] Interrupts are supported between multiple VMs by using a shared memory server by using a chardev socket. -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>] [,chardev=<id>][,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master] -chardev socket,path=<path>,id=<id> The shared memory server, sample programs and init scripts are in a git repo here: www.gitorious.org/nahanni Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-11Documentation: Fix spelling bugsStefan Weil
rewuired -> required ths -> this Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29Pre-allocate guest address spacePaul Brook
Allow pre-allocation of the guest virtual address space in usermode emulation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-18Fix manpage errorsBlue Swirl
Split long unbreakable lines to smaller sections. Spotted by Debian Lintian tool: http://lintian.debian.org/full/pkg-qemu-devel@lists.alioth.debian.org.html#qemu Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-10Documentation: Enhance documentation (index, keywords)Stefan Weil
* Add some keywords for the concept index. * Add some keywords for the keystroke index. * Mark invalid or unclear documentation with TODO. Is there a better proposal how to do this? * Fix copy+paste error in ColdFire section (options were copied from ARM). * Fix documentation for Wine. * Add placeholders for missing system emulations. * Add placeholders for missing user emulation commands. * Add an appendix with license (to be discussed). * Add an appendix for every type of index which is supported by texinfo. Currently, not all are used, but this might change in the future. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Documentation: Fix item listStefan Weil
@itemize @minus does not work as expected (the items start with "* -"). A simple @itemize gives a better result. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Documentation: Add some basic documentation on make targetsStefan Weil
This should help new users to get started. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Documentation: Use UTF-8 encoding and fix one wrong encodingStefan Weil
At least for Linux distributions UTF-8 is now standard, so the QEMU documentation should use this encoding, too. Even if there was currently only a single special character using ISO-8859-1, this might change in the future. So the texinfo keywords @documentlanguage and @documentencoding now document the language and the encoding. The special character was changed to UTF-8 (it could also have been changed to an x, but the original cross looks really nice if it is displayed correctly). These changes fix the html presentation at http://www.qemu.org/qemu-doc.html#SEC65 (ARM System emulator). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Documentation: Add direntry for info formatStefan Weil
update-info-dir maintains an index of all available documentation in info format (the file /usr/share/info/dir). It reads special @direntry tags in info files. This patch (extracted from a larger patch provided by Dirk Ullrich) adds these tags for qemu-doc.info and qemu-tech.info. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10doc: Update mingw cross compile instructionsScott Tsai
The "Cross compilation for Windows with Linux" section of qemu-doc.texi still instructs the user to use 'configure --enable-mingw32' even after the option was removed in Aug 2008: http://git.savannah.gnu.org/cgit/qemu.git/commit/?id=cd01b4a312248dd4e12c3d389d1a349cea4015d8 This documentation only change updates the instructions to: * Remove use of '--enable-mingw32' in the configure example * Correct the 'sdl-config' script name * Remove references to i386-mingw32msvc.tar.gz which no longer exists in recent SDL releases * Document the zlib dependency Signed-off-by: Scott Tsai <scottt.tw@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-21ARM PBX-A9 memory map tweaksPaul Brook
Add core tile memeory to the RealView PBX-A9 board. Document the memeory maps that are known to work with the qemu bootloader. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19ARM PBX-A9 board supportPaul Brook
Implement ARM RealView PBX-A9 board support. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-16ARM PB-A8 supportPaul Brook
Add ARM Realview PB-A8 board support. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-13ARM MPCore tweaksPaul Brook
Allow the user to specify the number of cores present on the RealView EB + ARM11MPCore board. Also split into its own config rather than guessing from the CPU name. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-10-15Documentation: Add missing tags to placeholdersKevin Wolf
Not all placeholders in options descriptions had the @var tag on them. Add the tag so that it's clearly visible that they are placeholders. Patchworks-ID: 35602 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-10Add information w.r.t default GUS IRQ assigmentmalc
2009-09-10Allow to unscale the output window with a Ctrl-Alt-u hotkeymalc
Signed-off-by: malc <av1474@comtv.ru>
2009-07-17Userspace guest address offsettingPaul Brook
Re-implement GUEST_BASE support. Offset guest ddress space by default if the guest binary contains regions below the host mmap_min_addr. Implement support for i386, x86-64 and arm hosts. Signed-off-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-06-06doc: Update information on supported network adapters.Stefan Weil
* There are no ISA PCI network adapters. * MIPS Malta is supported with any PCI network card. Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2009-06-06Use hxtool to generate monitor documentation and C structuresBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-27doc: Briefly mention CRIS and MicroBlaze.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-20remove gcc 3.x requirement from documentationHollis Blanchard
This text is no longer accurate. After the patch is applied, the generated version at http://www.nongnu.org/qemu/qemu-doc.html should be regenerated. This patch is also a candidate for the stable branch. (The URL above is probably generated from the stable branch anyways, so maybe it goes without saying.) Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
2009-05-14Syborg (Symbian Virtual Platform) boardPaul Brook
A virtual reference platform for SymbianOS development/debugging. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-05Add new command line option -singlestep for tcg single stepping.aurel32
This replaces a compile time option for some targets and adds this feature to targets which did not have a compile time option. Add monitor command to enable or disable single step mode. Modify monitor command "info status" to display single step mode. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28Syncing documentation vs. -help vs. qemu_options tableblueswir1
Try to keep documentation about command line switches, -help text and qemu_options table synchronized. In true Qemu tradition, an include file is generated from single .hx file containing all relevant information in one place. The include file is parsed once for getting the enums, another time for getopt tables and hird time for help messages. Texi documentation for the options is generated from the same .hx file. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6884 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Fix texinfo syntax errors.aurel32
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6761 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Support ACLs for controlling VNC access ("Daniel P. Berrange")aliguori
This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Add SASL authentication support ("Daniel P. Berrange")aliguori
This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-27chroot and change user support (Nolan)aliguori
Resent with fixed formatting. This patch adds two new command line options: -chroot <dir> -runas <user> This is useful for running qemu as an unprivileged user in a chroot jail. To avoid having to populate the jail, chrooting happens right before the start of guest execution. Signed-off-by: Nolan Leake <nolan@sigbus.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6652 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-27Allow additions of ACPI tables from command line (Gleb Natapov)aliguori
This is needed to dynamically add SLIC tables with Windows activation keys. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6650 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-16specify vmchannel as a net option (Gleb Natapov)aliguori
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6623 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-08Switch Mac99 to OpenBIOSblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6560 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 21:35:21 +0000