aboutsummaryrefslogtreecommitdiff
path: root/qemu-config.c
AgeCommit message (Collapse)Author
2011-09-01trace: add "-trace events" argument to control initial stateLluís
The "-trace events" argument can be used to provide a file with a list of trace event names that will be enabled prior to starting execution, thus providing early tracing. This saves the user from manually toggling event states through the monitor interface or whichever backend-specific interface. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: avoid conditional code compilation during option parsingLluís
A default implementation for backend-specific routines is provided in "trace/default.c", which backends can override by setting "trace_default=no" in "configure". Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_*Lluís
Provides a more hierarchical view of the variable domain. Also adds the CONFIG_TRACE_* variables for all backends. [Stefan added missing 'test' in stap if statement] Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-23block: add cache=directsync parameter to -driveStefan Hajnoczi
This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file I/O with no disk write cache presented to the guest. This mode is useful when guests may not be sending flushes when appropriate and therefore leave data at risk in case of power failure. When cache=directsync is used, write operations are only completed to the guest when data is safely on disk. This new mode is like cache=writethrough but it bypasses the host page cache. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-29showing a splash picture when startwayne
Added options to let qemu transfer two configuration files to bios: "bootsplash.bmp" and "etc/boot-menu-wait", which could be specified by command -boot splash=P,splash-time=T P is jpg/bmp file name or an absolute path, T have a max value of 0xffff, unit is ms. With these two options, if user invoke qemu with menu=on option, then a splash picture would be showed in a given time. For example: qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000 would make boot.bmp shown as a brand with 5 seconds in the booting up process. This feature need the new seabios's support, which could be got from git. Signed-off-by: Wayne Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23Generalize -machine command line optionJan Kiszka
-machine somehow suggests that it selects the machine, but it doesn't. Fix that before this command is set in stone. Actually, -machine should supersede -M and allow to introduce arbitrary per-machine options to the command line. That will change the internal realization again, but we will be able to keep the user interface stable. Tested-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-19qemu-config: Document -drive optionsLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-06qemu-config: comment spell fixGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-06spice: add SASL supportMarc-André Lureau
Turn on SASL support by appending "sasl" to the spice arguments, which requires that the client use SASL to authenticate with the spice. The exact choice of authentication method used is controlled from the system / user's SASL configuration file for the 'qemu' service. This is typically found in /etc/sasl2/qemu.conf. If running QEMU as an unprivileged user, an environment variable SASL_CONF_PATH can be used to make it search alternate locations for the service config. While some SASL auth methods can also provide data encryption (eg GSSAPI), it is recommended that SASL always be combined with the 'tls' and 'x509' settings to enable use of SSL and server certificates. This ensures a data encryption preventing compromise of authentication credentials. It requires support from spice 0.8.1. [ kraxel: moved spell fix to separate commit ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-06spice: add option for disabling copy paste supportHans de Goede
Some people want to be able disable spice's guest <-> client copy paste support because of security considerations. [ kraxel: drop old-version error message ]
2011-05-08Introduce -machine command option.Anthony PERARD
This option gives the ability to switch one "accelerator" like kvm, xen or the default one tcg. We can specify more than one accelerator by separate them by a colon. QEMU will try each one and use the first whose works. So, ./qemu -machine accel=xen:kvm:tcg which would try Xen support first, then KVM and finally TCG if none of the other works. By default, QEMU will use TCG. But we can specify another default in the global configuration file. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24spice: add chardev (v5)Alon Levy
Adding a chardev backend for spice, where spice determines what to do with it based on the name attribute given during chardev creation. For usage by spice vdagent in conjunction with a properly named virtio-serial device, and future smartcard channel usage. Example usage: qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \ -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 v4->v5: * add tracing events * fix missing comma * fix help string to show debug is optional v3->v4: * updated commit message v1->v3 changes: (v2 had a wrong commit message) * removed spice-qemu-char.h, folded into ui/qemu-spice.h * removed dead IOCTL code * removed comment * removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-11Add bootindex for option roms.Gleb Natapov
Extend -option-rom command to have additional parameter ,bootindex=. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-08spice: add misc config optionsGerd Hoffmann
This patch adds a few more options to tweak spice server behavior. The documentation update chunk has the details ;)
2010-10-08spice: add config options for the listening addressGerd Hoffmann
Make listening address configurable. Also add options to force using IPv4 or IPv6.
2010-10-08spice: add config options for channel security.Gerd Hoffmann
This allows to enforce tls or plaintext usage for certain spice channels. [ v2: code style fixup ]
2010-10-08spice: make compression configurable.Yonit Halperin
This patch adds options to the -spice command line switch to configure image compression. [ v2: speling fix in the documentation ]
2010-10-08spice: tls supportGerd Hoffmann
Add options to the -spice command line switch to setup tls.
2010-10-05Merge remote branch 'spice/submit.6' into stagingAnthony Liguori
Conflicts: configure Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-01Add option to turn on JSON pretty printing in monitorDaniel P. Berrange
Expaned '-mon' arg to allow a 'pretty=on' flag. This makes the monitor pretty print its replies to easy human debugging / reading Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-09-21spice: core bitsGerd Hoffmann
Add -spice command line switch. Has support setting passwd and port for now. With this patch applied the spice client can successfully connect to qemu. You can't do anything useful yet though.
2010-09-09trace: Add trace file name command-line optionPrerna Saxena
This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-09-04Fix repeated typo: was "end if list" instead of "end of list"Jes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QemuOpts: allow new option groups be registered at runtime.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19rtc: Remove TARGET_I386 from qemu-config.c, enables driftfixAmit Shah
qemu-config.c doesn't contain any target-specific code, and the TARGET_I386 conditional code didn't get compiled as a result. Removing this enables the driftfix parameter for rtc. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22virtio-9p: Introduces an option to specify the security model.Venkateswararao Jujjuri (JV)
The new option is: -fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough] -virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag In the case of mapped security model, files are created with QEMU user credentials and the client-user's credentials are saved in extended attributes. Whereas in the case of passthrough security model, files on the filesystem are directly created with client-user's credentials. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-26Add cache=unsafe parameter to -driveAlexander Graf
Usually the guest can tell the host to flush data to disk. In some cases we don't want to flush though, but try to keep everything in cache. So let's add a new cache value to -drive that allows us to set the cache policy to most aggressive, disabling flushes. We call this mode "unsafe", as guest data is not guaranteed to survive host crashes anymore. This patch also adds a noop function for aio, so we can do nothing in AIO fashion. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-24Fix error handling in qemu_read_config_fileKevin Wolf
We need to close the file even in error case. While at it, make the callers catch all kind of errors. ENOENT is allowed for default config files, they are optional. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03virtio-9p: Create a syntactic shortcut for the file-system pass-thruGautham R Shenoy
Currently the commandline to create a virtual-filesystem pass-through between the guest and the host is as follows: #qemu -fsdev fstype,id=ID,path=path/to/share \ -device virtio-9p-pci,fsdev=ID,mount_tag=tag \ This patch provides a syntactic short-cut to achieve the same as follows: #qemu -virtfs fstype,path=path/to/share,mount_tag=tag This will be internally expanded as: #qemu -fsdev fstype,id=tag,path=path/to/share, \ -device virtio-9p-pci,fsdev=tag,mount_tag=tag \ Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03virtio-9p: Create a commandline option -fsdevGautham R Shenoy
This patch creates a new command line option named -fsdev to hold any file system specific information. The option will currently hold the following attributes: -fsdev fstype id=id,path=path_to_share where fstype: Type of the file system. id: Identifier used to refer to this fsdev path: The path on the host that is identified by this fsdev. [aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext] Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-23Make qemu-config available for toolsKevin Wolf
To be able to use config files for blkdebug, we need to make these functions available in the tools. This involves moving two functions that can only be built in the context of the emulator. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23qemu-config: Make qemu_config_parse more genericKevin Wolf
qemu_config_parse gets the option groups as a parameter now instead of hardcoding the VM configuration groups. This way it can be used for other configurations, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23qemu-config: qemu_read_config_file() reads the normal config fileKevin Wolf
Introduce a new function qemu_read_config_file which reads the VM configuration from a config file. Unlike qemu_config_parse it doesn't take a open file but a filename and reduces code duplication as a side effect. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-18error: Drop extra messages after qemu_opts_set() and qemu_opts_parse()Markus Armbruster
Both functions report errors nicely enough now, no need for additional messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-03-16qemu-option: Rename find_list() to qemu_find_opts() & external linkageMarkus Armbruster
Next commit wants to use it.
2010-03-16qemu-option: Move the implied first name into QemuOptsListMarkus Armbruster
We sometimes permit omitting the first option name, for example -device foo is short for -device driver=foo. The name to use ("driver" in the example) is passed as argument to qemu_opts_parse(). For each QemuOptsList, we use at most one such name. Move the name into QemuOptsList, and pass whether to permit the abbreviation. This ensures continued consistency, and simplifies the commit after next in this series.
2010-03-16QemuOpts: Fix qemu_config_parse() to catch file read errorsMarkus Armbruster
2010-03-16error: Track locations in configuration filesMarkus Armbruster
New LOC_FILE. Use it for tracking file name and line number in qemu_config_parse(). We now report errors like qemu:foo.conf:42: Did not find I2C bus for smbus-eeprom In particular, gems like this message: -device: no driver specified become almost nice now: qemu:foo.conf:44: -device: no driver specified (A later commit will get rid of the bogus -device:)
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-16error: Move qemu_error & friends into their own headerMarkus Armbruster
2010-02-22Add cpu model configuration support..john cooper
This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12rework -monitor handling, switch to QemuOptsGerd Hoffmann
This patch reworks the -monitor handling: - It adds a new "mon" QemuOpts list for the monitor(s). - It adds a monitor_parse() function to parse the -monitor switch. - It adds a mon_init function to initialize the monitor(s) from the "mon" QemuOpts list. - It winds up everything and removes the old bits. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: add command line option to set global defaults for properties.Gerd Hoffmann
This patch adds infrastructure and command line option for setting global defaults for device properties, i.e. you can for example use -global virtio-blk-pci.vectors=0 to turn off msi by default for all virtio block devices. The config file syntax is: [global] driver = "virtio-blk-pci" property = "vectors" value = "0" This can also be used to set properties for devices which are not created via -device but implicitly via machine init, i.e. -global isa-fdc,driveA=<name> This patch uses the mechanism which configures properties for the compatibility machine types (pc-0.10 & friends). The command line takes precedence over the machine type values. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03Introduce rerror option for drivesKevin Wolf
rerror controls the action to be taken when an error occurs while accessing the guest image file. It corresponds to werror which already controls the action take for write errors. This purely introduces parsing rerror command line option into the right structures, real support for it in the device emulation is added in the following patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09QemuOpts: parse config from file.Gerd Hoffmann
Add functions to parse QemuOpts from a git-style config file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09QemuOpts: dump config.Gerd Hoffmann
Add a function to write the QemuOpts configuration to a git-style config file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09QemuOpts: add find_list()Gerd Hoffmann
Factor out the QemuOptsList search code for upcoming users. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09Added readonly flag to -drive commandNaphtali Sprei
This is a slightly revised patch for adding readonly flag to the -drive command. Even though this patch is "stand-alone", it assumes a previous related patch (in Anthony staging tree), that passes the readonly attribute of the drive to the guest OS, applied first. This enables sharing same image between guests, with readonly access. Implementaion mark the drive as read_only and changes the flags when actually opening the file. The readonly attribute of a qcow also passed to it's base file. For ide that cannot pass the readonly attribute to the guest OS, disallow the readonly flag. Also, return error code from bdrv_truncate for readonly drive. Signed-off-by: Naphtali Sprei <nsprei@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-26 17:07:49 +0000