aboutsummaryrefslogtreecommitdiff
path: root/qemu-char.c
AgeCommit message (Collapse)Author
2014-11-23qemu-char: fix tcp_get_fdsMichael S. Tsirkin
tcp_get_fds API discards fds if there's more than 1 of these. It's tricky to fix this without API changes in the generic case. However, this API is only used by tests ATM, and tests know how many fds they expect. So let's not waste cycles trying to fix this properly: simply assume at most 16 fds (tests use at most 8 now). assert if some test tries to get more. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-17qemu-char: fix MISSING_COMMAGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09qemu-char: Fix reconnect socket error reportingCorey Minyard
If reconnect was set, errors wouldn't always be reported. Fix that and also only report a connect error once until a connection has been made. The primary purpose of this is to tell the user that a connection failed so they can know they need to figure out what went wrong. So we don't want to spew too much out here, just enough so they know. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09qemu-sockets: Add error to non-blocking connect handlerCorey Minyard
An error value here would be quite handy and more consistent with the rest of the code. Signed-off-by: Corey Minyard <cminyard@mvista.com> [Make sure SO_ERROR value is passed to error_setg_errno. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04qemu-char: Print the remote and local addresses for a socketCorey Minyard
It seems that it might be a good idea to know what is at the remote end of a socket for tracking down issues. So add that to the socket filename. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04qemu-char: Add reconnecting to client socketsCorey Minyard
Adds a "reconnect" option to socket backends that gives a reconnect timeout. This only applies to client sockets. If the other end of a socket closes the connection, qemu will attempt to reconnect after the given number of seconds. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04qemu-char: set socket filename to disconnected when not connectedCorey Minyard
This way we can tell if the socket is connected or not. It also splits the string conversions out into separate functions to make this more convenient. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04qemu-char: Move some items into TCPCharDriverCorey Minyard
This keeps them from having to be passed around and makes them available for later functions, like printing and reconnecting. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04qemu-char: Rework qemu_chr_open_socket() for reconnectCorey Minyard
Move all socket configuration to qmp_chardev_open_socket(). qemu_chr_open_socket_fd() just opens the socket. This is getting ready for the reconnect code, which will call open_sock_fd() on a reconnect attempt. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04qemu-char: Make the filename size for a chardev a #defineCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-20qemu-char: Permit only a single "stdio" character deviceLi Liu
When more than one is used, the terminal settings aren't restored correctly on exit. Fixable. However, such usage makes no sense, because the users race for input, so outlaw it instead. If you want to connect multiple things to stdio, use the mux chardev. Signed-off-by: Li Liu <john.liuli@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-09-16qemu-char: Rename register_char_driver_qapi() to register_char_driver()Peter Maydell
Now we have removed the legacy register_char_driver() we can rename register_char_driver_qapi() to the more obvious and shorter name. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
2014-09-16qemu-char: Remove register_char_driver() machineryPeter Maydell
Now that all the char backends have been converted to the QAPI framework we can remove the machinery for handling old style backends. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1409653457-27863-5-git-send-email-peter.maydell@linaro.org
2014-09-16qemu-char: Convert udp backend to QAPIPeter Maydell
Convert the udp char backend to the new style QAPI framework. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1409653457-27863-4-git-send-email-peter.maydell@linaro.org
2014-09-16qemu-char: Convert socket backend to QAPIPeter Maydell
Convert the socket char backend to the new style QAPI framework; this allows it to return an Error ** to callers who might not want it to print directly about socket failures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1409653457-27863-2-git-send-email-peter.maydell@linaro.org
2014-09-05pty: Fix byte loss bug when connecting to ptySebastian Tanase
When trying to print data to the pty, we first check if it is connected. If not, we try to reconnect, but we drop the pending data even if we have successfully reconnected; this makes us lose the first byte of the very first transmission. This small fix addresses the issue by checking once more if the pty is connected after having tried to reconnect. Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-18Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Block pull request # gpg: Signature made Fri 15 Aug 2014 18:04:23 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: (55 commits) qcow2: fix new_blocks double-free in alloc_refcount_block() image-fuzzer: Reduce number of generator functions in __init__ image-fuzzer: Add generators of L1/L2 tables image-fuzzer: Add fuzzing functions for L1/L2 table entries docs: Expand the list of supported image elements with L1/L2 tables image-fuzzer: Public API for image-fuzzer/runner/runner.py image-fuzzer: Generator of fuzzed qcow2 images image-fuzzer: Fuzzing functions for qcow2 images image-fuzzer: Tool for fuzz tests execution docs: Specification for the image fuzzer ide: only constrain read/write requests to drive size, not other types virtio-blk: Correct bug in support for flexible descriptor layout libqos: Change free function called in malloc libqos: Correct mask to align size to PAGE_SIZE in malloc-pc libqtest: add QTEST_LOG for debugging qtest testcases ide: Fix segfault when flushing a device that doesn't exist qemu-options: add missing -drive discard option to cmdline help parallels: 2TB+ parallels images support parallels: split check for parallels format in parallels_open parallels: replace tabs with spaces in block/parallels.c ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-15qemu-char: using qemu_set_nonblock() instead of fcntl(O_NONBLOCK)Gonglei
Technically, fcntl(soc, F_SETFL, O_NONBLOCK) is incorrect since it clobbers all other file flags. We can use F_GETFL to get the current flags, set or clear the O_NONBLOCK flag, then use F_SETFL to set the flags. Using the qemu_set_nonblock() wrapper. Signed-off-by: Wangxin <wangxinxin.wang@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15don't use 'Yoda conditions'Gonglei
imitate nearby code about using '!value' or 'value == NULL' Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-06backends: Introduce chr-testdevPaolo Bonzini
From: Paolo Bonzini <pbonzini@redhat.com> chr-testdev enables a virtio serial channel to be used for guest initiated qemu exits. hw/misc/debugexit already enables guest initiated qemu exits, but only for PC targets. chr-testdev supports any virtio-capable target. kvm-unit-tests/arm is already making use of this backend. Currently there is a single command implemented, "q". It takes a (prefix) argument for the exit code, thus an exit is implemented by writing, e.g. "1q", to the virtio-serial port. It can be used as: $QEMU ... \ -device virtio-serial-device \ -device virtserialport,chardev=ctd -chardev testdev,id=ctd or, use: $QEMU ... \ -device virtio-serial-device \ -device virtconsole,chardev=ctd -chardev testdev,id=ctd to bind it to virtio-serial port0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25qemu-char: ignore flow control if a PTY's slave is not connectedPaolo Bonzini
After commit f702e62 (serial: change retry logic to avoid concurrency, 2014-07-11), guest boot hangs if the backend is an unconnected PTY. The reason is that PTYs do not support G_IO_HUP, and serial_xmit is never called. To fix this, simply invoke serial_xmit immediately (via g_idle_source_new) when this happens. Tested-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14qemu-char: fix deadlock with "-monitor pty"Paolo Bonzini
qemu_chr_be_generic_open cannot be called with the write lock taken, because it calls client code that may call qemu_chr_fe_write. This actually happens for the monitor: 0x00007ffff27dbf79 in __GI_raise (sig=sig@entry=6) 0x00007ffff27df388 in __GI_abort () 0x00005555555ef489 in error_exit (err=<optimized out>, msg=msg@entry=0x5555559796d0 <__func__.5959> "qemu_mutex_lock") 0x00005555558f9080 in qemu_mutex_lock (mutex=mutex@entry=0x555556248a30) 0x0000555555713936 in qemu_chr_fe_write (s=0x555556248a30, buf=buf@entry=0x5555563d8870 "QEMU 2.0.90 monitor - type 'help' for more information\r\n", len=56) 0x00005555556217fd in monitor_flush_locked (mon=mon@entry=0x555556251fd0) 0x0000555555621a12 in monitor_flush_locked (mon=0x555556251fd0) monitor_puts (mon=mon@entry=0x555556251fd0, str=0x55555634bfa7 "", str@entry=0x55555634bf70 "QEMU 2.0.90 monitor - type 'help' for more information\n") 0x0000555555624359 in monitor_vprintf (mon=0x555556251fd0, fmt=<optimized out>, ap=<optimized out>) 0x0000555555624414 in monitor_printf (mon=<optimized out>, fmt=fmt@entry=0x5555559105a0 "QEMU %s monitor - type 'help' for more information\n") 0x0000555555629806 in monitor_event (opaque=0x555556251fd0, event=<optimized out>) 0x000055555571343c in qemu_chr_be_generic_open (s=0x555556248a30) To avoid this, defer the call to an idle callback, which will be called as soon as the main loop is re-entered. In order to simplify the cleanup and do it in one place only, change pty_chr_close to call pty_chr_state. To reproduce, run with "-monitor pty", then try to read from the slave /dev/pts/FOO that it creates. Fixes: 9005b2a7589540a3733b3abdcfbccfe7746cd1a1 Reported-by: Li Liang <liangx.z.li@intel.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-06qemu-char: add chr_add_watch support in mux chardevKirill Batuzov
Forward chr_add_watch call from mux chardev to underlying implementation. This should fix bug #1335444 Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06Handle G_IO_HUP in tcp_chr_read for tcp chardevKirill Batuzov
Since commit cdaa86a54b232572bba594bf87a7416e527e460c ("Add G_IO_HUP handler for socket chardev") GLib limitation results in a bug on Windows host. Steps to reproduce: Start qemu: qemu-system-i386 -qmp tcp:127.0.0.1:4444:server:nowait Connect with telnet: telnet 127.0.0.1 4444 Try sending some data from telnet. Expected result: answers from QEMU. Observed result: no answers (actually tcp_chr_read is not called at all). Due to GLib limitations it is not possible to create several watches on one channel on Windows hosts. See bug #338943 in GNOME bugzilla for details: https://bugzilla.gnome.org/show_bug.cgi?id=338943 This reimplements commit cdaa86a54b232572bba594bf87a7416e527e460c ("Add G_IO_HUP handler for socket chardev") using a single watch: Handle G_IO_HUP in tcp_chr_read instead. It is already watched by a corresponding watch. Remove the second watch with its handler. Cc: Antonios Motakis <a.motakis@virtualopensystems.com> Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Nikita Belov <zodiac@ispras.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-27char: report frontend open/closed state in 'query-chardev'Laszlo Ersek
In addition to the on-line reporting added in the previous patch, allow libvirt to query frontend state independently of events. Libvirt's path to identify the guest agent channel it cares about differs between the event added in the previous patch and the QMP response field added here. The event identifies the frontend device, by "id". The 'query-chardev' QMP command identifies the backend device (again by "id"). The association is under libvirt's control. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376 Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-26qemu-char: initialize chr_write_lockPaolo Bonzini
Otherwise, Windows fails with a deadlock. Reported-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1403679897-11480-1-git-send-email-pbonzini@redhat.com Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-26qemu-char: fix warning 'res' may be used uninitializedIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1403683241-20678-1-git-send-email-imammedo@redhat.com Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-24Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: (43 commits) monitor: protect event emission monitor: protect outbuf and mux_out with mutex qemu-char: make writes thread-safe qemu-char: move pty_chr_update_read_handler around qemu-char: do not call chr_write directly qemu-char: introduce qemu_chr_alloc qapi event: clean up qapi event: convert QUORUM events qapi event: convert GUEST_PANICKED qapi event: convert BALLOON_CHANGE qmp: convert ACPI_DEVICE_OST event qapi event: convert SPICE events qapi event: convert VNC events qapi event: convert NIC_RX_FILTER_CHANGED qapi event: convert other BLOCK_JOB events qapi event: convert BLOCK_IMAGE_CORRUPTED qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR qapi event: convert DEVICE_TRAY_MOVED qapi event: convert DEVICE_DELETED qapi event: convert WATCHDOG ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23qemu-char: make writes thread-safePaolo Bonzini
This will let threads other than the I/O thread raise QMP events. GIOChannel is thread-safe, and send and receive state is usually well-separated. The only driver that requires some care is the pty driver, where some of the state is shared by the read and write sides. That state is protected with the chr_write_lock too. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qemu-char: move pty_chr_update_read_handler aroundPaolo Bonzini
Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qemu-char: do not call chr_write directlyPaolo Bonzini
Make the mux always go through qemu_chr_fe_write, so that we'll get the mutex for the underlying chardev. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qemu-char: introduce qemu_chr_allocPaolo Bonzini
The next patch will modify this function to initialize state that is common to all backends. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qemu-char: avoid leaking unused fds in tcp_get_msgfds()Stefan Hajnoczi
Commit c76bf6bb8fbbb233a7d3641e09229d23747d5ee3 ("Add chardev API qemu_chr_fe_get_msgfds") extended the get_msgfds API from one to multiple file descriptors. It forgot to close unused file descriptors before freeing the file descriptor array. This patch prevents a file descriptor leak if the tcp_get_msgfds() callers requests fewer file descriptors than are available. Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23qemu-char: fix qemu_chr_fe_get_msgfd()Stefan Hajnoczi
Commit c76bf6bb8fbbb233a7d3641e09229d23747d5ee3 ("Add chardev API qemu_chr_fe_get_msgfds") broke qemu_chr_fe_get_msgfd() because it changed the return value. Callers expect -1 if no fd is available. The commit changed the return value to 0 (which is a valid file descriptor number) so callers always detected a file descriptor even if none was available. This patch fixes qemu-iotests 045: $ cd tests/qemu-iotests && ./check 045 [...] +FAIL: test_add_fd_invalid_fd (__main__.TestFdSets) +---------------------------------------------------------------------- +Traceback (most recent call last): + File "./045", line 123, in test_add_fd_invalid_fd + self.assert_qmp(result, 'error/class', 'GenericError') + File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 232, in assert_qmp + result = self.dictpath(d, path) + File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 211, in dictpath + self.fail('failed path traversal for "%s" in "%s"' % (path, str(d))) +AssertionError: failed path traversal for "error/class" in "{u'return': {u'fdset-id': 2, u'fd': 0}}" Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23console: move chardev declarations to sysemu/char.hMichael S. Tsirkin
move generic chardev APIs to sysemu/char.h, to make them available to callers which can not depend on the whole of ui/console.h. This fixes a build error on systems without pixman-devel: ./configure --disable-tools --disable-docs --target-list=arm-linux-user ... pixman none ... make ... In file included from /data/home/nchip/linaro/qemu/include/ui/console.h:4:0, from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2: /data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal error: pixman.h: No such file or directory #include <pixman.h> ^ compilation terminated. Reported-by: Riku Voipio <riku.voipio@iki.fi> Tested-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19Add G_IO_HUP handler for socket chardevNikolay Nikolaev
This is used to detect that the remote end has disconnected. Just call tcp_char_disconnect on receiving this event. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add chardev API qemu_chr_fe_get_msgfdsNikolay Nikolaev
This extends the existing qemu_chr_fe_get_msgfd by allowing to read a set of fds. The function for receiving the fds - unix_process_msgfd is extended to allocate the needed array size. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add chardev API qemu_chr_fe_set_msgfdsNikolay Nikolaev
This will set an array of file descriptors to the internal structures. The next time a message is send the array will be send as ancillary data. This feature works on the UNIX domain socket backend only. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add chardev API qemu_chr_fe_read_allNikolay Nikolaev
This function will attempt to read data from the chardev trying to fill the buffer up to the given length. Add tcp_chr_disconnect to reuse disconnection code where needed. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-13char: fix avail_connections init in qemu_chr_open_eventfd()David Marchand
When trying to use a ivshmem server with qemu, ivshmem init code tries to create a CharDriverState object for each eventfd retrieved from the server. To create this object, a call to qemu_chr_open_eventfd() is done. Right after this, before adding a frontend, qemu_chr_fe_claim_no_fail() is called. qemu_chr_open_eventfd() does not set avail_connections to 1, so no frontend can be associated because qemu_chr_fe_claim_no_fail() makes qemu stop right away. This problem comes from 456d60692310e7ac25cf822cc1e98192ad636ece "qemu-char: Call fe_claim / fe_release when not using qdev chr properties". Fix this, by setting avail_connections to 1 in qemu_chr_open_eventfd(). Signed-off-by: David Marchand <david.marchand@6wind.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-11monitor: Add ringbuf_write and ringbuf_read argument completionHani Benhabiles
Export chr_is_ringbuf() function. Also remove left-over function prototypes while at it. Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-21char: Explain qmp_chardev_add()'s unusual error handlingMarkus Armbruster
Character backend open hasn't been fully converted to the Error API. Some opens fail without setting an error. qmp_chardev_add() needs to detect when that happens, and set a generic error. Explain that in a comment, and inline error_is_set() for clarity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-21char: Clean up fragile use of error_is_set()Markus Armbruster
Using error_is_set(ERRP) to find out whether a function failed is either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP may be null, because errors go undetected when it is. It's fragile when proving ERRP non-null involves a non-local argument. Else, it's unnecessarily opaque (see commit 84d18f0). The error_is_set(errp) in qemu_chr_new_from_opts() is merely fragile, because the callers never pass a null errp argument. Make the code more robust and more obviously correct: receive the error in a local variable, then propagate it through the parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-21char: Use return values instead of error_is_set(errp)Markus Armbruster
Using error_is_set(errp) to check whether a function call failed is fragile: it breaks when errp is null. Check perfectly suitable return values instead when possible. As far as I can tell, errp can't be null there, but this is more robust and more obviously correct Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-13char: restore read callback on a reattached (hotplug) chardevGal Hammer
Fix a bug that was introduced in commit 386a5a1e. A removal of a device set the chr handlers to NULL. However when the device is plugged back, its read callback is not restored so data can't be transferred from the host to the guest (e.g. via the virtio-serial port). https://bugzilla.redhat.com/show_bug.cgi?id=1027181 Signed-off-by: Gal Hammer <ghammer@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-02-17qmp: expose list of supported character device backendsMartin Kletzander
Introduce 'query-chardev-backends' QMP command which lists all supported character device backends. Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-12-23misc: Use macro ARRAY_SIZE where possibleStefan Weil
This improves readability and simplifies the code. Cc: Anthony Liguori <aliguori@amazon.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-16char: add qemu_chr_fe_event()Marc-André Lureau
Teach the chardev frontend to send event. This is used by the Spice port chardev currently. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-10Merge remote-tracking branch 'amit/char-remove-watch-on-unplug' into stagingAnthony Liguori
# By Amit Shah # Via Amit Shah * amit/char-remove-watch-on-unplug: char: remove watch callback on chardev detach from frontend char: use common function to disable callbacks on chardev close char: move backends' io watch tag to CharDriverState Message-id: 20131004154802.GA25646@grmbl.mre Signed-off-by: Anthony Liguori <aliguori@amazon.com>