aboutsummaryrefslogtreecommitdiff
path: root/qapi
AgeCommit message (Collapse)Author
2018-11-27qapi: add query-display-options commandGerd Hoffmann
Add query-display-options command, which allows querying the qemu display configuration. This isn't particularly useful, except it exposes QAPI type DisplayOptions in query-qmp-schema, so that libvirt can discover recently added -display parameter rendernode (commit d4dc4ab133b). Works around lack of sufficiently powerful command line introspection. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Tested-by: Erik Skultety <eskultet@redhat.com> Message-id: 20181122071613.2889-1-kraxel@redhat.com [ kraxel: reworded commit message as suggested by armbru ]
2018-11-16qapi: Add "rendernode" display option for egl-headlessErik Skultety
Unlike SPICE, egl-headless doesn't offer a way of specifying the DRM node used for OpenGL, hence QEMU always selecting the first one that is available. Thus, add the 'rendernode' option for egl-headless to QAPI. Signed-off-by: Erik Skultety <eskultet@redhat.com> Message-id: 7658e15eca72d520e7a5fb1c2e724702d83d4f7f.1542362949.git.eskultet@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-05block: Add auto-read-only optionKevin Wolf
If a management application builds the block graph node by node, the protocol layer doesn't inherit its read-only option from the format layer any more, so it must be set explicitly. Backing files should work on read-only storage, but at the same time, a block job like commit should be able to reopen them read-write if they are on read-write storage. However, without option inheritance, reopen only changes the read-only option for the root node (typically the format layer), but not the protocol layer, so reopening fails (the format layer wants to get write permissions, but the protocol layer is still read-only). A simple workaround for the problem in the management tool would be to open the protocol layer always read-write and to make only the format layer read-only for backing files. However, sometimes the file is actually stored on read-only storage and we don't know whether the image can be opened read-write (for example, for NBD it depends on the server we're trying to connect to). This adds an option that makes QEMU try to open the image read-write, but allows it to degrade to a read-only mode without returning an error. The documentation for this option is consciously phrased in a way that allows QEMU to switch to a better model eventually: Instead of trying when the image is first opened, making the read-only flag dynamic and changing it automatically whenever the first BLK_PERM_WRITE user is attached or the last one is detached would be much more useful behaviour. Unfortunately, this more useful behaviour is also a lot harder to implement, and libvirt needs a solution now before it can switch to -blockdev, so let's start with this easier approach for now. Instead of adding a new auto-read-only option, turning the existing read-only into an enum (with a bool alternate for compatibility) was considered, but it complicated the implementation to the point that it didn't seem to be worth it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-11-02Merge remote-tracking branch 'remotes/elmarco/tags/chrdev-pull-request' into ↵Peter Maydell
staging - add websocket support - socket: make 'fd' incompatible with 'reconnect' - fix a websocket leak - unrelated editorconfig patch that missed -trivial (included for convenience) - v2: fix commit author field # gpg: Signature made Thu 01 Nov 2018 08:23:39 GMT # gpg: using RSA key DAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/chrdev-pull-request: editorconfig: set emacs mode tests/test-char: Check websocket chardev functionality chardev: Add websocket support chardev/char-socket: Function headers refactoring char-socket: make 'fd' incompatible with 'reconnect' char-socket: correctly set has_reconnect when parsing QemuOpts websock: fix handshake leak Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-01chardev: Add websocket supportJulia Suvorova
New option "websocket" added to allow using WebSocket protocol for chardev socket backend. Example: -chardev socket,websocket,server,id=... Signed-off-by: Julia Suvorova <jusual@mail.ru> Message-Id: <20181018223501.21683-3-jusual@mail.ru> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-10-31qapi: Fix COLOStatus and query-colo-status since versionZhang Chen
This structure and command have missed qemu version 3.0, so fix it to since version 3.1. Signed-off-by: Zhang Chen <zhangckid@gmail.com> Message-Id: <20181022164118.5502-1-zhangckid@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-29qapi: add transaction support for x-block-dirty-bitmap-mergeVladimir Sementsov-Ogievskiy
New action is like clean action: do the whole thing in .prepare and undo in .abort. This behavior for bitmap-changing actions is needed because backup job actions use bitmap in .prepare. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29blockdev-backup: add bitmap argumentJohn Snow
It is only an oversight that we don't allow incremental backup with blockdev-backup. Add the bitmap argument which enables this. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20180830211605.13683-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-24memory-device: introduce separate config optionDavid Hildenbrand
Some architectures might support memory devices, while they don't support DIMM/NVDIMM. So let's - Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE - Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-7-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-21slirp: Implement RFC2132 TFTP server nameFam Zheng
This new usernet option can be used to add data for option 66 (tftp server name) in the BOOTP reply, which is useful in PXE based automatic OS install such as OpenBSD. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-10-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* RTC fixes (Artem) * icount fixes (Artem) * rr fixes (Pavel, myself) * hotplug cleanup (Igor) * SCSI fixes (myself) * 4.20-rc1 KVM header update (myself) * coalesced PIO support (Peng Hao) * HVF fixes (Roman B.) * Hyper-V refactoring (Roman K.) * Support for Hyper-V IPI (Vitaly) # gpg: Signature made Fri 19 Oct 2018 12:47:58 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) replay: pass raw icount value to replay_save_clock target/i386: kvm: just return after migrate_add_blocker failed hyperv_testdev: add SynIC message and event testmodes hyperv: process POST_MESSAGE hypercall hyperv: add support for KVM_HYPERV_EVENTFD hyperv: process SIGNAL_EVENT hypercall hyperv: add synic event flag signaling hyperv: add synic message delivery hyperv: make overlay pages for SynIC hyperv: only add SynIC in compatible configurations hyperv: qom-ify SynIC hyperv:synic: split capability testing and setting i386: add hyperv-stub for CONFIG_HYPERV=n default-configs: collect CONFIG_HYPERV* in hyperv.mak hyperv: factor out arch-independent API into hw/hyperv hyperv: make hyperv_vp_index inline hyperv: split hyperv-proto.h into x86 and arch-independent parts hyperv: rename kvm_hv_sint_route_set_sint hyperv: make HvSintRoute reference-counted hyperv: address HvSintRoute by X86CPU pointer ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19vl, qapi: offset calculation in RTC_CHANGE event revertedArtem Pisarenko
Return value of qemu_timedate_diff(), used for calculation offset in QAPI 'RTC_CHANGE' event, restored to keep compatibility. Since it wasn't documented that difference is relative to host clock advancement, this change also adds important note to 'RTC_CHANGE' event description to highlight established implementation specifics. Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com> Message-Id: <1fc12c77e8b7115d3842919a8b586d9cbe4efca6.1539846575.git.artem.k.pisarenko@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19qapi: Add new command to query colo statusZhang Chen
Libvirt or other high level software can use this command query colo status. You can test this command like that: {'execute':'query-colo-status'} Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19qapi/migration.json: Rename COLO unknown mode to none mode.Zhang Chen
Suggested by Markus Armbruster rename COLO unknown mode to none mode. Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19qmp event: Add COLO_EXIT event to notify users while exited COLOzhanghailiang
If some errors happen during VM's COLO FT stage, it's important to notify the users of this event. Together with 'x-colo-lost-heartbeat', Users can intervene in COLO's failover work immediately. If users don't want to get involved in COLO's failover verdict, it is still necessary to notify users that we exited COLO mode. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-11qmp, hmp: make subsystem/system-vendor identities optionalDenis V. Lunev
According to PCI specification, subsystem id and subsystem vendor id are present only in type 0 and type 2 headers (at different offsets), but not in type 1 headers. Thus we should make this data optional in struct PciDeviceId and skip reporting them via HMP if the information is not available. Additional (wrong information) about PCI bridges (Type1 devices) has been added in 5383a705 and fortunately not released. This patch fixes that problem. The problem was spotted by Markus. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20181002135538.12113-1-den@openvz.org> Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-09qapi/misc.json: Remove superfluous words in CpuModelExpansionTypeKashyap Chamarthy
Remove repetition of 'independent of'. While at it, s/QMU/QEMU in @CpuDefinitionInfo. Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> Message-Id: <20181003104605.8477-1-kchamart@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [Commit message updated as requested by Kashyap] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-10-01Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - qcow2 cache option default changes (Linux: 32 MB maximum, limited by whatever cache size can be made use of with the specific image; default cache-clean-interval of 10 minutes) - reopen: Allow specifying unchanged child node references, and changing a few generic options (discard, detect-zeroes) - Fix werror/rerror defaults for -device drive=<node-name> - Test case fixes # gpg: Signature made Mon 01 Oct 2018 18:17:35 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (23 commits) tests/test-bdrv-drain: Fix too late qemu_event_reset() test-replication: Lock AioContext around blk_unref() qcow2: Fix cache-clean-interval documentation block-backend: Set werror/rerror defaults in blk_new() qcow2: Explicit number replaced by a constant qcow2: Set the default cache-clean-interval to 10 minutes qcow2: Resize the cache upon image resizing qcow2: Increase the default upper limit on the L2 cache size qcow2: Assign the L2 cache relatively to the image size qcow2: Avoid duplication in setting the refcount cache size qcow2: Make sizes more humanly readable include: Add a lookup table of sizes qcow2: Options' documentation fixes block: Allow changing 'detect-zeroes' on reopen block: Allow changing 'discard' on reopen file-posix: Forbid trying to change unsupported options during reopen block: Forbid trying to change unsupported options during reopen block: Allow child references on reopen block: Don't look for child references in append_open_options() block: Remove child references from bs->{options,explicit_options} ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-01qcow2: Fix cache-clean-interval documentationLeonid Bloch
Fixing cache-clean-interval documentation following the recent change to a default of 600 seconds on supported plarforms (only Linux currently). Signed-off-by: Leonid Bloch <lbloch@janustech.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01Merge remote-tracking branch 'remotes/kraxel/tags/ui-20181001-pull-request' ↵Peter Maydell
into staging ui: some small fixes/improvements. # gpg: Signature made Mon 01 Oct 2018 11:42:16 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20181001-pull-request: gtk: add zoom-to-fit to gtk options. vnc: call sasl_server_init() only when required sdl2: show console #0 unconditionally Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-01qcow2: Set the default cache-clean-interval to 10 minutesLeonid Bloch
The default cache-clean-interval is set to 10 minutes, in order to lower the overhead of the qcow2 caches (before the default was 0, i.e. disabled). * For non-Linux platforms the default is kept at 0, because cache-clean-interval is not supported there yet. Signed-off-by: Leonid Bloch <lbloch@janustech.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01gtk: add zoom-to-fit to gtk options.Gerd Hoffmann
This allows to set the option on the command line, i.e. "-display gtk,zoom-to-fit={on,off}", overriding the default chosen by qemu. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 20180827095620.26774-1-kraxel@redhat.com
2018-10-01Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-09-26' into ↵Peter Maydell
staging nbd patches for 2018-09-26 Fixes for external clients; add reminder to revisit naming of x- command - Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context - John Snow: qapi: bitmap-merge: document name change - Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export # gpg: Signature made Thu 27 Sep 2018 03:40:03 BST # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2018-09-26: nbd/server: send more than one extent of base:allocation context qapi: bitmap-merge: document name change nbd/server: fix bitmap export Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-26qapi: bitmap-merge: document name changeJohn Snow
We named these using underscores instead of the preferred dash, document this nearby so we cannot possibly forget to rectify this when we remove the 'x-' prefixes when the feature becomes stable. We do not implement the change ahead of time to avoid more work for libvirt to do in order to figure out how to use the beta version of the API needlessly. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20180919190934.16284-1-jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: typo fix] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-09-26migration: show the statistics of compressionXiao Guangrong
Currently, it includes: pages: amount of pages compressed and transferred to the target VM busy: amount of count that no free thread to compress data busy-rate: rate of thread busy compressed-size: amount of bytes after compression compression-rate: rate of compressed size Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Message-Id: <20180906070101.27280-3-xiaoguangrong@tencent.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-25Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2018-09-25' ↵Peter Maydell
into staging Block layer patches: - Drain fixes - node-name parameters for block-commit - Refactor block jobs to use transactional callbacks for exiting # gpg: Signature made Tue 25 Sep 2018 16:12:44 BST # gpg: using RSA key F407DB0061D5CF40 # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/xanclic/tags/pull-block-2018-09-25: (42 commits) test-bdrv-drain: Test draining job source child and parent block: Use a single global AioWait test-bdrv-drain: Fix outdated comments test-bdrv-drain: AIO_WAIT_WHILE() in job .commit/.abort job: Avoid deadlocks in job_completed_txn_abort() test-bdrv-drain: Test nested poll in bdrv_drain_poll_top_level() block: Remove aio_poll() in bdrv_drain_poll variants blockjob: Lie better in child_job_drained_poll() block-backend: Decrease in_flight only after callback block-backend: Fix potential double blk_delete() block-backend: Add .drained_poll callback block: Add missing locking in bdrv_co_drain_bh_cb() test-bdrv-drain: Test AIO_WAIT_WHILE() in completion callback job: Use AIO_WAIT_WHILE() in job_finish_sync() test-blockjob: Acquire AioContext around job_cancel_sync() test-bdrv-drain: Drain with block jobs in an I/O thread aio-wait: Increase num_waiters even in home thread blockjob: Wake up BDS when job becomes idle job: Fix missing locking due to mismerge job: Fix nested aio_poll() hanging in job_txn_apply ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25commit: Add top-node/base-node optionsKevin Wolf
The block-commit QMP command required specifying the top and base nodes of the commit jobs using the file name of that node. While this works in simple cases (local files with absolute paths), the file names generated for more complicated setups can be hard to predict. The block-commit command has more problems than just this, so we want to replace it altogether in the long run, but libvirt needs a reliable way to address nodes now. So we don't want to wait for a new, cleaner command, but just add the minimal thing needed right now. This adds two new options top-node and base-node to the command, which allow specifying node names instead. They are mutually exclusive with the old options. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-09-25qmp, hmp: add PCI subsystem id and vendor id to PCI infoDenis V. Lunev
This is a long story. Red Hat has relicensed Windows KVM device drivers in 2018 and there was an agreement that to avoid WHQL driver conflict software manufacturers should set proper PCI subsystem vendor ID in their distributions. Thus PCI subsystem vendor id becomes actively used. The problem is that this field is applied by us via hardware compats. Thus technically it could be lost. This patch adds PCI susbsystem id and vendor id to exportable parameters for validation. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20180918095852.28422-1-den@openvz.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-25block/backup: qapi documentation fixupJohn Snow
Fix documentation to match the other jobs amended for 3.1. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180906130225.5118-16-jsnow@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25qapi/block-stream: expose new job propertiesJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180906130225.5118-15-jsnow@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25qapi/block-mirror: expose new job propertiesJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180906130225.5118-14-jsnow@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25qapi/block-commit: expose new job propertiesJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180906130225.5118-13-jsnow@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25Record history of ppcemb target in common.jsonThomas Huth
We recently removed the long deprecated "ppcemb" target. This adds a comment in common.json about the SysEmuTarget type, recording when it was removed. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-24Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' ↵Peter Maydell
into staging ppc patch queue 2018-09-07 Here's another pull request for qemu-3.1. No real theme here, just an assortment of various fixes. Probably the most notable thing is the removal of the ppcemb target which has been deprecated for some time now. # gpg: Signature made Fri 07 Sep 2018 08:30:02 BST # gpg: using RSA key 6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-3.1-20180907: target-ppc: Extend HWCAP2 bits for ISA 3.0 target/ppc/kvm: set vcpu as online/offline Fix a deadlock case in the CPU hotplug flow spapr: Correct reference count on spapr-cpu-core mac_newworld: implement custom FWPathProvider uninorth: add ofw-addr property to allow correct fw path generation mac_oldworld: implement custom FWPathProvider grackle: set device fw_name and address for correct fw path generation macio: add addr property to macio IDE object macio: add macio bus to help with fw path generation macio: move MACIOIDEState type declarations to macio.h spapr_pci: fix potential NULL pointer dereference spapr: fix leak of rev array ppc: Remove deprecated ppcemb target Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-30qmp: constify qmp_is_oob()Marc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180829134043.31706-3-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28ppc: Remove deprecated ppcemb targetThomas Huth
There is no known available OS for ppc around anymore that uses page sizes below 4k, so it does not make much sense that we keep wasting our time on building and testing the ppcemb-softmmu target. It has been deprecated since two releases, and nobody complained, so let's remove this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-25Merge remote-tracking branch 'remotes/armbru/tags/pull-qobject-2018-08-24' ↵Peter Maydell
into staging QObject patches for 2018-08-24 # gpg: Signature made Fri 24 Aug 2018 20:28:53 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qobject-2018-08-24: (58 commits) json: Update references to RFC 7159 to RFC 8259 json: Support %% in JSON strings when interpolating json: Improve safety of qobject_from_jsonf_nofail() & friends json: Keep interpolation state in JSONParserContext tests/drive_del-test: Fix harmless JSON interpolation bug json: Clean up headers qobject: Drop superfluous includes of qemu-common.h json: Make JSONToken opaque outside json-parser.c json: Unbox tokens queue in JSONMessageParser json: Streamline json_message_process_token() json: Enforce token count and size limits more tightly qjson: Have qobject_from_json() & friends reject empty and blank json: Assert json_parser_parse() consumes all tokens on success json: Fix streamer not to ignore trailing unterminated structures json: Fix latent parser aborts at end of input qjson: Fix qobject_from_json() & friends for multiple values json: Improve names of lexer states related to numbers json: Replace %I64d, %I64u by %PRId64, %PRIu64 json: Leave rejecting invalid interpolation to parser json: Pass lexical errors and limit violations to callback ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-24json: Update references to RFC 7159 to RFC 8259Markus Armbruster
RFC 8259 (December 2017) obsoletes RFC 7159 (March 2014). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180823164025.12553-59-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-08-24qjson: Have qobject_from_json() & friends reject empty and blankMarkus Armbruster
The last case where qobject_from_json() & friends return null without setting an error is empty or blank input. Callers: * block.c's parse_json_protocol() reports "Could not parse the JSON options". It's marked as a work-around, because it also covered actual bugs, but they got fixed in the previous few commits. * qobject_input_visitor_new_str() reports "JSON parse error". Also marked as work-around. The recent fixes have made this unreachable, because it currently gets called only for input starting with '{'. * check-qjson.c's empty_input() and blank_input() demonstrate the behavior. * The other callers are not affected since they only pass input with exactly one JSON value or, in the case of negative tests, one error. Fail with "Expecting a JSON value" instead of returning null, and simplify callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-48-armbru@redhat.com>
2018-08-24json: Redesign the callback to consume JSON valuesMarkus Armbruster
The classical way to structure parser and lexer is to have the client call the parser to get an abstract syntax tree, the parser call the lexer to get the next token, and the lexer call some function to get input characters. Another way to structure them would be to have the client feed characters to the lexer, the lexer feed tokens to the parser, and the parser feed abstract syntax trees to some callback provided by the client. This way is more easily integrated into an event loop that dispatches input characters as they arrive. Our JSON parser is kind of between the two. The lexer feeds tokens to a "streamer" instead of a real parser. The streamer accumulates tokens until it got the sequence of tokens that comprise a single JSON value (it counts curly braces and square brackets to decide). It feeds those token sequences to a callback provided by the client. The callback passes each token sequence to the parser, and gets back an abstract syntax tree. I figure it was done that way to make a straightforward recursive descent parser possible. "Get next token" becomes "pop the first token off the token sequence". Drawback: we need to store a complete token sequence. Each token eats 13 + input characters + malloc overhead bytes. Observations: 1. This is not the only way to use recursive descent. If we replaced "get next token" by a coroutine yield, we could do without a streamer. 2. The lexer reports errors by passing a JSON_ERROR token to the streamer. This communicates the offending input characters and their location, but no more. 3. The streamer reports errors by passing a null token sequence to the callback. The (already poor) lexical error information is thrown away. 4. Having the callback receive a token sequence duplicates the code to convert token sequence to abstract syntax tree in every callback. 5. Known bug: the streamer silently drops incomplete token sequences. This commit rectifies 4. by lifting the call of the parser from the callbacks into the streamer. Later commits will address 3. and 5. The lifting removes a bug from qjson.c's parse_json(): it passed a pointer to a non-null Error * in certain cases, as demonstrated by check-qjson.c. json_parser_parse() is now unused. It's a stupid wrapper around json_parser_parse_err(). Drop it, and rename json_parser_parse_err() to json_parser_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-35-armbru@redhat.com>
2018-08-22migration: do not wait for free threadXiao Guangrong
Instead of putting the main thread to sleep state to wait for free compression thread, we can directly post it out as normal page that reduces the latency and uses CPUs more efficiently A parameter, compress-wait-thread, is introduced, it can be enabled if the user really wants the old behavior Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-08-22migrate/cpu-throttle: Add max-cpu-throttle migration parameterLi Qiang
Currently, the default maximum CPU throttle for migration is 99(CPU_THROTTLE_PCT_MAX). This is too big and can make a remarkable performance effect for the guest. We see a lot of packets latency exceed 500ms when the CPU_THROTTLE_PCT_MAX reached. This patch set adds a new max-cpu-throttle parameter to limit the CPU throttle. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-08-22qapi/migration.json: fix the description for "query-migrate" outputjialina01
In the return for command "query-migrate", time information like "total-time", "setup-time", "downtime", is not included in ram json-object. So fix the description in migration.json by unpacking those information from ram json-object. Signed-off-by: jialina01 <jialina01@baidu.com> Signed-off-by: chaiwen <chaiwen@baidu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-08-15qapi: block: Remove mentions of error types which were removedPeter Krempa
Most of the various error classes were removed prior to the 1.2 release. Remove mentions of the error classes which did not make it. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-08-15qapi/block: Document restrictions for node namesKevin Wolf
blockdev-add fails if an invalid node name is given, so we should document what a valid node name even is. Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Cong Li <coli@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2018-07-30block/qapi: Add 'qdev' field to query-blockstats resultKevin Wolf
Like for query-block, the client needs to identify which BlockBackend the returned data is for. Anonymous BlockBackends are identified by the device model they are attached to. Add a 'qdev' field that contains the qdev ID or QOM path of the attached device model. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-07-23qapi: Make 'allow-oob' optional in SchemaInfoCommandMarkus Armbruster
Making 'allow-oob' optional in SchemaInfoCommand permits omitting it in the common case. Shrinks query-qmp-schema's output from 122.1KiB to 118.6KiB for me. Note that out-of-band execution is still experimental (you have to configure the monitor with x-oob=on to use it). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180718090557.17248-1-armbru@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2018-07-16cli qmp: Mark --preconfig, exit-preconfig experimentalMarkus Armbruster
Committing to the current --preconfig / exit-preconfig interface before it has seen any use is premature. Mark both as experimental, the former in documentation, the latter by renaming it to x-exit-preconfig. See the previous commit for more detailed rationale. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180705091402.26244-3-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> [Straightforward conflict with commit 514337c142f resolved]
2018-07-16qapi: Do not expose "allow-preconfig" in query-qmp-schemaMarkus Armbruster
According to commit 047f7038f58, option --preconfig [...] allows pausing QEMU in the new RUN_STATE_PRECONFIG state, allowing the configuration of QEMU from QMP before the machine jumps into board initialization code of machine_run_board_init() The intent is to allow management to query machine state and additionally configure it using previous query results within one QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to query board specific parameters and 2nd for actual VM start using query results for additional parameters). The implementation is a bit of a hack: it splices in an additional main loop before machine creation, in special runstate preconfig. New command exit-preconfig exits that main loop. QEMU continues initializing, creates the machine, and runs the good old main loop. The replacement of the main loop is transparent to monitors. Sadly, some commands expect initialization to be complete. Running them in --preconfig's main loop violates their preconditions. Since we don't really know which commands are safe, we use a whitelist. This drags the concept of run state into the QMP core. The whitelist is done as a command flag in the QAPI schema (commit d6fe3d02e9a). Drags the concept of run state further into the QAPI language. The command flag is exposed in query-qmp-schema (also commit d6fe3d02e9a). This makes it ABI. I consider the whole thing an offensively ugly hack, but sometimes an ugly hack is the best we can do to solve a problem people have. The need described by the commit message quote above is genuine. The proper solution would be a main loop that permits complete configuration via QMP. This is out of reach, thus the hack. However, even though the need is genuine, it isn't urgent: libvirt is not going to use this anytime soon. Baking a hack into ABI before it has any users is a bad idea. This commit reverts the parts of commit d6fe3d02e9a that affect ABI via query-qmp-schema. The commit did the following: (1) Add command flag 'allow-preconfig' to the QAPI schema language (2) Pass it to code generators (3) Have the commands.py code generator pass it to the command registry (so commit 047f7038f58 can use it as whitelist) (4) Add 'allow-preconfig' to SchemaInfoCommand (neglecting to update qapi-code-gen.txt section "Client JSON Protocol introspection") (5) Set 'allow-preconfig': true for commands qmp_capabilities, query-commands, query-command-line-options, query-status Revert exactly (4), plus a bit of documentation added to qemu-tech.info in commit 047f7038f58. Shrinks query-qmp-schema's output from 126.5KiB to 121.8KiB for me. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180705091402.26244-2-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> [Straightforward conflict with commit d626b6c1ae7 resolved]
2018-07-10Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - Copy offloading fixes for when the copy increases the image size - Temporary revert of the removal of deprecated -drive options - Fix request serialisation in the image fleecing scenario - Fix copy-on-read crash with unaligned image size - Fix another drain crash # gpg: Signature made Tue 10 Jul 2018 16:37:52 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (24 commits) block: Use common write req handling in truncate block: Fix bdrv_co_truncate overlap check block: Use common req handling in copy offloading block: Use common req handling for discard block: Fix handling of image enlarging write block: Extract common write req handling block: Use uint64_t for BdrvTrackedRequest byte fields block: Use BdrvChild to discard block: Add copy offloading trace points block: Prefix file driver trace points with "file_" Revert "block: Remove deprecated -drive geometry options" Revert "block: Remove deprecated -drive option addr" Revert "block: Remove deprecated -drive option serial" Revert "block: Remove dead deprecation warning code" block/blklogwrites: Make sure the log sector size is not too small qapi/block-core.json: Add missing documentation for blklogwrites log-append option block/backup: fix fleecing scheme: use serialized writes block: add BDRV_REQ_SERIALISING flag block: split flags in copy_range block/io: fix copy_range ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 02:34:08 +0000