aboutsummaryrefslogtreecommitdiff
path: root/qapi
AgeCommit message (Collapse)Author
2017-06-20qapi: merge QInt and QFloat in QNumMarc-André Lureau
We would like to use a same QObject type to represent numbers, whether they are int, uint, or floats. Getters will allow some compatibility between the various types if the number fits other representations. Add a few more tests while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [parse_stats_intervals() simplified a bit, comment in test_visitor_in_int_overflow() tidied up, suppress bogus warnings] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-19qapi: Clean up qobject_input_type_number() control flowMarc-André Lureau
Use the more common pattern to error out. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-6-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-06block: Clarify documentation of BlockInfo member io-statusMarkus Armbruster
Say "SCSI except scsi-generic" instead of "scsi-disk", because scsi-disk could mean either scsi-disk.c (which is correct) or device model scsi-disk (which would be incorrect). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1494327362-30727-2-git-send-email-armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-04qapi: Fix some QMP documentation regressionsEric Blake
In the process of getting rid of docs/qmp-commands.txt, we managed to regress on some of the text that changed after the point where the move was first branched and when the move actually occurred. For example, commit 3282eca for blockdev-snapshot re-added the extra "options" layer which had been cleaned up in commit 0153d2f. This clears up all regressions identified over the range 02b351d..bd6092e: https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg05127.html as well as a cleanup to x-blockdev-remove-medium to prefer 'id' over 'device' (matching the cleanup for 'eject'). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-04block: Correct documentation for BLOCK_WRITE_THRESHOLDEric Blake
Use the correct command name. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-31qobject-input-visitor: Reject non-finite numbers with keyvalMarkus Armbruster
The QObject input visitor can produce only finite numbers when its input comes out of the JSON parser, because the the JSON parser implements RFC 7159, which provides no syntax for infinity and NaN. However, it can produce infinity and NaN when its input comes out of keyval_parse(), because we parse with strtod() then. The keyval variant should not be able to express things the JSON variant can't. Rejecting non-finite numbers there is the conservative fix. It's also minimally invasive. We could instead extend our JSON dialect to provide for infinity and NaN. Not today. Note that the JSON formatter can emit non-finite numbers (marked FIXME in commit 6e8e5cb). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1495471335-23707-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-05-23shutdown: Expose bool cause in SHUTDOWN and RESET eventsEric Blake
Libvirt would like to be able to distinguish between a SHUTDOWN event triggered solely by guest request and one triggered by a SIGTERM or other action on the host. While qemu_kill_report() was already able to give different output to stderr based on whether a shutdown was triggered by a host signal (but NOT by a host UI event, such as clicking the X on the window), that information was then lost to management. The previous patches improved things to use an enum throughout all callsites, so now we have something ready to expose through QMP. Note that for now, the decision was to expose ONLY a boolean, rather than promoting ShutdownCause to a QAPI enum; this is because libvirt has not expressed an interest in anything finer-grained. We can still add additional details, in a backwards-compatible manner, if a need later arises (if the addition happens before 2.10, we can replace the bool with an enum; otherwise, the enum will have to be in addition to the bool); this patch merely adds a helper shutdown_caused_by_guest() to map the internal enum into the external boolean. Update expected iotest outputs to match the new data (complete coverage of the affected tests is obtained by -raw, -qcow2, and -nbd). Here is output from 'virsh qemu-monitor-event --loop' with the patch installed: event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true} event STOP at 1492639680.732116 for domain fedora_13: <null> event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false} Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event was triggered by an action I took directly in the guest (shutdown -h), at which point qemu stops the vcpus and waits for libvirt to do any final cleanups; the second SHUTDOWN event is the result of libvirt sending SIGTERM now that it has completed cleanup. Libvirt is already smart enough to only feed the first qemu SHUTDOWN event to the end user (remember, virsh qemu-monitor-event is a low-level debugging interface that is explicitly unsupported by libvirt, so it sees things that normal end users do not); changing qemu to emit SHUTDOWN only once is outside the scope of this series. See also https://bugzilla.redhat.com/1384007 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170515214114.15442-6-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-18Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into stagingStefan Hajnoczi
HMP pull # gpg: Signature made Wed 17 May 2017 07:03:39 PM BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * dgilbert/tags/pull-hmp-20170517: ramblock: add new hmp command "info ramblock" utils: provide size_to_str() ramblock: add RAMBLOCK_FOREACH() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-17utils: provide size_to_str()Peter Xu
Moving the algorithm from print_type_size() into size_to_str() so that other component can also leverage it. With that, refactor print_type_size(). The assert() in that logic is removed though, since even UINT64_MAX would not overflow. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-3-git-send-email-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-16block: curl: Allow passing cookies via QCryptoSecretPeter Krempa
Since cookies can contain sensitive data (session ID, etc ...) it is desired to hide them from the prying eyes of users. Add a possibility to pass them via the secret infrastructure. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1447413 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: f4a22cdebdd0bca6a13a43a2a6deead7f2ec4bb3.1493906281.git.pkrempa@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-11blkdebug: Add ability to override unmap geometriesEric Blake
Make it easier to simulate various unusual hardware setups (for example, recent commits 3482b9b and b8d0a98 affect the Dell Equallogic iSCSI with its 15M preferred and maximum unmap and write zero sizing, or b2f95fe deals with the Linux loopback block device having a max_transfer of 64k), by allowing blkdebug to wrap any other device with further restrictions on various alignments. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-9-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11file-posix: Add 'locking' optionFam Zheng
Making this option available even before implementing it will let converting tests easier: in coming patches they can specify the option already when necessary, before we actually write code to lock the images. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11block: Add, parse and store "force-share" optionFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-09qobject-input-visitor: Catch misuse of end_struct vs. end_listMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493282486-28338-5-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [More elaborate assertions for clarity]
2017-05-09qobject-input-visitor: Document full_name_nth()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493282486-28338-3-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-05-09qmp: Improve QMP dispatch error messagesMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1493282486-28338-2-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-09sockets: Rename SocketAddressFlat to SocketAddressMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
2017-05-09sockets: Rename SocketAddress to SocketAddressLegacyMarkus Armbruster
The next commit will rename SocketAddressFlat to SocketAddress, and the commit after that will replace most uses of SocketAddressLegacy by SocketAddress, replacing most of this commit's renames right back. Note that checkpatch emits a few "line over 80 characters" warnings. The long lines are all temporary; the SocketAddressLegacy replacement will shorten them again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09qapi: New QAPI_CLONE_MEMBERS()Markus Armbruster
QAPI_CLONE() returns a newly allocated QAPI object. Inconvenient when we want to clone into an existing object. QAPI_CLONE_MEMBERS() does exactly that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-09qobject: Use simpler QDict/QList scalar insertion macrosEric Blake
We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24block/vxhs.c: Add support for a new block device type called "vxhs"Ashish Mittal
Source code for the qnio library that this code loads can be downloaded from: https://github.com/VeritasHyperScale/libqnio.git Sample command line using JSON syntax: ./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -msg timestamp=on 'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410", "server":{"host":"172.172.17.4","port":"9999"}}' Sample command line using URI syntax: qemu-img convert -f raw -O raw -n /var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0 Sample command line using TLS credentials (run in secure mode): ./qemu-io --object tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read -v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999", "vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}' [Jeff: Modified trace-events with the correct string formatting] Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
2017-04-03sheepdog: Fix blockdev-addMarkus Armbruster
Commit 831acdc "sheepdog: Implement bdrv_parse_filename()" and commit d282f34 "sheepdog: Support blockdev-add" have different ideas on how the QemuOpts parameters for the server address are named. Fix that. While there, rename BlockdevOptionsSheepdog member addr to server, for consistency with BlockdevOptionsSsh, BlockdevOptionsGluster, BlockdevOptionsNbd. Commit 831acdc's example becomes --drive driver=sheepdog,server.type=inet,server.host=fido,server.port=7000,vdi=dolly instead of --drive driver=sheepdog,host=fido,vdi=dolly Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com> Message-id: 1490895797-29094-10-git-send-email-armbru@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-03nbd: Tidy up blockdev-add interfaceMarkus Armbruster
SocketAddress is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. I intend to limit its use to existing external interfaces, and convert all internal interfaces to SocketAddressFlat. BlockdevOptionsNbd is an external interface using SocketAddress. We already use SocketAddressFlat elsewhere in blockdev-add. Replace it by SocketAddressFlat while we can (it's new in 2.9) for simplicity and consistency. For example, { "execute": "blockdev-add", "arguments": { "node-name": "foo", "driver": "nbd", "server": { "type": "inet", "data": { "host": "localhost", "port": "12345" } } } } becomes { "execute": "blockdev-add", "arguments": { "node-name": "foo", "driver": "nbd", "server": { "type": "inet", "host": "localhost", "port": "12345" } } } Since the internal interfaces still take SocketAddress, this requires conversion function socket_address_crumple(). It'll go away when I update the interfaces. Unfortunately, SocketAddress is also visible in -drive since 2.8: -drive if=none,driver=nbd,server.type=inet,server.data.host=127.0.0.1,server.data.port=12345 Nobody should be using it, as it's fairly new and has never been documented, so adding still more compatibility gunk to keep it working isn't worth the trouble. You now have to use -drive if=none,driver=nbd,server.type=inet,server.host=127.0.0.1,server.port=12345 Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1490895797-29094-9-git-send-email-armbru@redhat.com [mreitz: Change iotest 147 accordingly] Because of this interface change, iotest 147 has to be adapted. Unfortunately, we cannot just flatten all of the addresses because nbd-server-start still takes a plain SocketAddress. Therefore, we need both and this is most easily achieved by writing the SocketAddress into the code and flattening it where necessary. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170330221243.17333-1-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-03-31qapi/curl: Extend and fix blockdev-add schemaMax Reitz
The curl block driver accepts more options than just "filename"; also, the URL is actually expected to be passed through the "url" option instead of "filename". Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170331120431.1767-2-mreitz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into stagingPeter Maydell
# gpg: Signature made Tue 28 Mar 2017 15:02:40 BST # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * remotes/cody/tags/block-pull-request: rbd: Fix bugs around -drive parameter "server" rbd: Revert -blockdev parameter password-secret rbd: Revert -blockdev and -drive parameter auth-supported rbd: Clean up qemu_rbd_create()'s detour through QemuOpts rbd: Clean up runtime_opts, fix -drive to reject filename rbd: Don't accept -drive driver=rbd, keyvalue-pairs=... rbd: Clean up after the previous commit rbd: Don't limit length of parameter values rbd: Fix to cleanly reject -drive without pool or image rbd: Reject -blockdev server.*.{numeric, to, ipv4, ipv6} Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-28rbd: Revert -blockdev parameter password-secretMarkus Armbruster
This reverts a part of commit 8a47e8e. We're having second thoughts on the QAPI schema (and thus the external interface), and haven't reached consensus, yet. Issues include: * BlockdevOptionsRbd member @password-secret isn't actually a password, it's a key generated by Ceph. * We're not sure where member @password-secret belongs (see the previous commit). * How @password-secret interacts with settings from a configuration file specified with @conf is undocumented. Let's avoid painting ourselves into a corner now, and revert the feature for 2.9. Note that users can still configure an authentication key with a configuration file. They probably do that anyway if they use Ceph outside QEMU as well. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-10-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Revert -blockdev and -drive parameter auth-supportedMarkus Armbruster
This reverts half of commit 0a55679. We're having second thoughts on the QAPI schema (and thus the external interface), and haven't reached consensus, yet. Issues include: * The implementation uses deprecated rados_conf_set() key "auth_supported". No biggie. * The implementation makes -drive silently ignore invalid parameters "auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in fact I'm going to fix similar bugs around parameter server), so again no biggie. * BlockdevOptionsRbd member @password-secret applies only to authentication method cephx. Should it be a variant member of RbdAuthMethod? * BlockdevOptionsRbd member @user could apply to both methods cephx and none, but I'm not sure it's actually used with none. If it isn't, should it be a variant member of RbdAuthMethod? * The client offers a *set* of authentication methods, not a list. Should the methods be optional members of BlockdevOptionsRbd instead of members of list @auth-supported? The latter begs the question what multiple entries for the same method mean. Trivial question now that RbdAuthMethod contains nothing but @type, but less so when RbdAuthMethod acquires other members, such the ones discussed above. * How BlockdevOptionsRbd member @auth-supported interacts with settings from a configuration file specified with @conf is undocumented. I suspect it's untested, too. Let's avoid painting ourselves into a corner now, and revert the feature for 2.9. Note that users can still configure authentication methods with a configuration file. They probably do that anyway if they use Ceph outside QEMU as well. Further note that this doesn't affect use of key "auth-supported" in -drive file=rbd:...:key=value. qemu_rbd_array_opts()'s parameter @type now must be RBD_MON_HOST, which is silly. This will be cleaned up shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-9-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Reject -blockdev server.*.{numeric, to, ipv4, ipv6}Markus Armbruster
We use InetSocketAddress in the QAPI schema. However, the code doesn't use inet_connect_saddr(), but formats "host" and "port" into a configuration string for rados_conf_set(). Thus, members "numeric", "to", "ipv4" and "ipv6" are silently ignored. Not nice. Example: -blockdev rbd,node-name=nn,pool=p,image=i,server.0.host=h0,server.0.port=12345,server.0.ipv4=off Factor a suitable InetSocketAddressBase out of InetSocketAddress, and use that. "numeric", "to", "ipv4" and "ipv6" are now rejected. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-2-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28block: Declare blockdev-add and blockdev-del supportedMarkus Armbruster
It's been a long journey, but here we are. The supported blockdev-add is not compatible to its experimental predecessors; bump all Since: tags to 2.9. x-blockdev-remove-medium, x-blockdev-insert-medium and x-blockdev-change need a bit more work, so leave them alone for now. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-22qapi: Fix QemuOpts visitor regression on unvisited inputEric Blake
An off-by-one in commit 15c2f669e meant that we were failing to check for unparsed input in all QemuOpts visitors. Recent testsuite additions show that fixing the obvious bug with bogus fields will also fix the case of an incomplete list visit; update the tests to match the new behavior. Simple testcase: ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio -numa node,size=1g failed to diagnose that 'size' is not a valid argument to -numa, and now once again reports: qemu-system-x86_64: -numa node,size=1g: Invalid parameter 'size' See also https://bugzilla.redhat.com/show_bug.cgi?id=1434666 CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20170322144525.18964-4-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-03-21qapi: Fix string input visitor regression for empty listsMarkus Armbruster
Visiting a list when input is the empty string should result in an empty list, not an error. Noticed when commit 3d089ce belatedly added tests, but simply accepted as weird then. It's actually a regression: broken in commit 74f24cb, v2.7.0. Fix it, and throw in another test case for empty string. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1490026424-11330-2-git-send-email-armbru@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-16qapi2texi: Implement boxed argument documentationMarkus Armbruster
This replaces manual references like "For the arguments, see the documentation of ..." by a generated reference "Arguments: the members of ...". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-25-git-send-email-armbru@redhat.com>
2017-03-16qapi: The #optional tag is redundant, dropMarkus Armbruster
We traditionally mark optional members #optional in the doc comment. Before commit 3313b61, this was entirely manual. Commit 3313b61 added some automation because its qapi2texi.py relied on #optional to determine whether a member is optional. This is no longer the case since the previous commit: the only thing qapi2texi.py still does with #optional is stripping it out. We still reject bogus qapi-schema.json and six places for qga/qapi-schema.json. Thus, you can't actually rely on #optional to see whether something is optional. Yet we still make people add it manually. That's just busy-work. Drop the code to check, fix up and strip out #optional, along with all instances of #optional. To keep it out, add code to reject it, to be dropped again once the dust settles. No change to generated documentation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-18-git-send-email-armbru@redhat.com>
2017-03-16qapi/rocker: Fix up doc comment notes on optional membersMarkus Armbruster
Talking about #optional like this # Note: fields are marked #optional to indicate that they may or may # not appear ... doesn't work so well in generated documentation, because the #optional tag is not visible there. Replace by # Note: optional members may or may not appear ... Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1489582656-31133-13-git-send-email-armbru@redhat.com>
2017-03-13block: Drop unmaintained 'archipelago' driverEric Blake
The driver has failed to build since commit da34e65, in qemu 2.6, due to a missing include of qapi/error.h for error_setg(). Since no one has complained in three releases, it is easier to remove the dead code than to keep it around, especially since it is not being built by default and therefore prone to bitrot. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-08Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer fixes for 2.9.0-rc0 # gpg: Signature made Tue 07 Mar 2017 14:59:18 GMT # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (27 commits) commit: Don't use error_abort in commit_start block: Don't use error_abort in blk_new_open sheepdog: Support blockdev-add qapi-schema: Rename SocketAddressFlat's variant tcp to inet qapi-schema: Rename GlusterServer to SocketAddressFlat gluster: Plug memory leaks in qemu_gluster_parse_json() gluster: Don't duplicate qapi-util.c's qapi_enum_parse() gluster: Drop assumptions on SocketTransport names sheepdog: Implement bdrv_parse_filename() sheepdog: Use SocketAddress and socket_connect() sheepdog: Report errors in pseudo-filename more usefully sheepdog: Don't truncate long VDI name in _open(), _create() sheepdog: Fix snapshot ID parsing in _open(), _create, _goto() sheepdog: Mark sd_snapshot_delete() lossage FIXME sheepdog: Fix error handling sd_create() sheepdog: Fix error handling in sd_snapshot_delete() sheepdog: Defuse time bomb in sd_open() error handling block: Fix error handling in bdrv_replace_in_backing_chain() block: Handle permission errors in change_parent_backing_link() block: Ignore multiple children in bdrv_check_update_perm() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-07keyval: Support listsMarkus Armbruster
Additionally permit non-negative integers as key components. A dictionary's keys must either be all integers or none. If all keys are integers, convert the dictionary to a list. The set of keys must be [0,N]. Examples: * list.1=goner,list.0=null,list.1=eins,list.2=zwei is equivalent to JSON [ "null", "eins", "zwei" ] * a.b.c=1,a.b.0=2 is inconsistent: a.b.c clashes with a.b.0 * list.0=null,list.2=eins,list.2=zwei has a hole: list.1 is missing Similar design flaw as for objects: there is no way to denote an empty list. While interpreting "key absent" as empty list seems natural (removing a list member from the input string works when there are multiple ones, so why not when there's just one), it doesn't work: "key absent" already means "optional list absent", which isn't the same as "empty list present". Update the keyval object visitor to use this a.0 syntax in error messages rather than the usual a[0]. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1488317230-26248-25-git-send-email-armbru@redhat.com> [Off-by-one fix squashed in, as per Kevin's review] Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07qapi: Improve how keyval input visitor reports unexpected dictsMarkus Armbruster
Incorrect option -blockdev node-name=foo,driver=file,filename=foo.img,aio.unmap=on is rejected with "Invalid parameter type for 'aio', expected: string". To make sense of this, you almost have to translate it into the equivalent QMP command { "execute": "blockdev-add", "arguments": { "node-name": "foo", "driver": "file", "filename": "foo.img", "aio": { "unmap": true } } } Improve the error message to "Parameters 'aio.*' are unexpected". Take care not to confuse the case "unexpected nested parameters" (i.e. the object is a QDict or QList) with the case "non-string scalar parameter". The latter is a misuse of the visitor, and should perhaps be an assertion. Note that test-qobject-input-visitor exercises this misuse in test_visitor_in_int_keyval(), test_visitor_in_bool_keyval() and test_visitor_in_number_keyval(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <1488317230-26248-23-git-send-email-armbru@redhat.com>
2017-03-07qapi: New qobject_input_visitor_new_str() for convenienceMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1488317230-26248-21-git-send-email-armbru@redhat.com>
2017-03-07qapi: New parse_qapi_name()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488317230-26248-19-git-send-email-armbru@redhat.com>
2017-03-07qapi: Factor out common qobject_input_get_keyval()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488317230-26248-8-git-send-email-armbru@redhat.com>
2017-03-07qapi: Factor out common part of qobject input visitor creationMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <1488317230-26248-7-git-send-email-armbru@redhat.com>
2017-03-07qapi: qobject input visitor variant for use with keyval_parse()Daniel P. Berrange
Currently the QObjectInputVisitor assumes that all scalar values are directly represented as the final types declared by the thing being visited. i.e. it assumes an 'int' is using QInt, and a 'bool' is using QBool, etc. This is good when QObjectInputVisitor is fed a QObject that came from a JSON document on the QMP monitor, as it will strictly validate correctness. To allow QObjectInputVisitor to be reused for visiting a QObject originating from keyval_parse(), an alternative mode is needed where all the scalars types are represented as QString and converted on the fly to the final desired type. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-8-git-send-email-berrange@redhat.com> Rebased, conflicts resolved, commit message updated to refer to keyval_parse(). autocast replaced by keyval in identifiers, noautocast replaced by fail in tests. Fix qobject_input_type_uint64_keyval() not to reject '-', for QemuOpts compatibility: replace parse_uint_full() by open-coded parse_option_number(). The next commit will add suitable tests. Leave out the fancy ERANGE error reporting for now, but add a TODO comment. Add it qobject_input_type_int64_keyval() and qobject_input_type_number_keyval(), too. Open code parse_option_bool() and parse_option_size() so we have to call qobject_input_get_name() only when actually needed. Again, leave out ERANGE error reporting for now. QAPI/QMP downstream extension prefixes __RFQDN_ don't work, because keyval_parse() splits them at '.'. This will be addressed later in the series. qobject_input_type_int64_keyval(), qobject_input_type_uint64_keyval(), qobject_input_type_number_keyval() tweaked for style. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <1488317230-26248-5-git-send-email-armbru@redhat.com>
2017-03-07sheepdog: Support blockdev-addMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07qapi-schema: Rename GlusterServer to SocketAddressFlatMarkus Armbruster
As its documentation says, it's not specific to Gluster. Rename it, as I'm going to use it for something else. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-05qapi: Fix object input visit beyond end of listMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-28-git-send-email-armbru@redhat.com>
2017-03-05qapi: Make input visitors detect unvisited list tailsMarkus Armbruster
Fix the design flaw demonstrated in the previous commit: new method check_list() lets input visitors report that unvisited input remains for a list, exactly like check_struct() lets them report that unvisited input remains for a struct or union. Implement the method for the qobject input visitor (straightforward), and the string input visitor (less so, due to the magic list syntax there). The opts visitor's list magic is even more impenetrable, and all I can do there today is a stub with a FIXME comment. No worse than before. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1488544368-30622-26-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-05qapi: Drop unused non-strict qobject input visitorMarkus Armbruster
The split between tests/test-qobject-input-visitor.c and tests/test-qobject-input-strict.c now makes less sense than ever. The next commit will take care of that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
2017-03-05qapi: Make string input and opts visitor require non-null inputMarkus Armbruster
The string input visitor tries to cope with null input. Null input isn't used anywhere, and isn't covered by tests. Unsurprisingly, it doesn't fully work: start_list() crashes because it passes the input via parse_str() to strtoll() unchecked. Make string_input_visitor_new() assert its argument isn't null, and drop the code trying to deal with null input. The opts visitor crashes when you try to actually visit something with null input. Make opts_visitor_new() assert its argument isn't null, mostly for clarity. qobject_input_visitor_new() already asserts its argument isn't null. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-17-git-send-email-armbru@redhat.com>
2017-03-05qapi: Drop string input visitor method optional()Markus Armbruster
visit_optional() is to be called only between visit_start_struct() and visit_end_struct(). Visitors that don't support struct visits, i.e. don't implement start_struct(), end_struct(), have no use for it. Clarify documentation. The string input visitor doesn't support struct visits. Its parse_optional() is therefore useless. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-16-git-send-email-armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 00:28:38 +0000