aboutsummaryrefslogtreecommitdiff
path: root/qapi-schema.json
AgeCommit message (Collapse)Author
2012-03-12qmp: convert blockdev-snapshot-sync to a wrapper around transactionsPaolo Bonzini
Simplify the blockdev-snapshot-sync code and gain failsafe operation by turning it into a wrapper around the new transaction command. A new option is also added matching "mode". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-03-12add mode field to blockdev-snapshot-sync transaction itemPaolo Bonzini
The mode field lets a management application create the snapshot destination outside QEMU. Right now, the only modes are "existing" and "absolute-paths". Mirroring introduces "no-backing-file". In the future "relative-paths" could be implemented too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-03-12rename blockdev-group-snapshot-syncPaolo Bonzini
We will add other kinds of operation. Prepare for this by adjusting the schema. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29qapi: Introduce blockdev-group-snapshot-sync commandJeff Cody
This is a QAPI/QMP only command to take a snapshot of a group of devices. This is similar to the blockdev-snapshot-sync command, except blockdev-group-snapshot-sync accepts a list devices, filenames, and formats. It is attempted to keep the snapshot of the group atomic; if the creation or open of any of the new snapshots fails, then all of the new snapshots are abandoned, and the name of the snapshot image that failed is returned. The failure case should not interrupt any operations. Rather than use bdrv_close() along with a subsequent bdrv_open() to perform the pivot, the original image is never closed and the new image is placed 'in front' of the original image via manipulation of the BlockDriverState fields. Thus, once the new snapshot image has been successfully created, there are no more failure points before pivoting to the new snapshot. This allows the group of disks to remain consistent with each other, even across snapshot failures. Signed-off-by: Jeff Cody <jcody@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-24suspend: add system_wakeup monitor commandGerd Hoffmann
This patch adds the system_wakeup monitor command which will simply wake up suspended guests. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qom: move properties from qdev to objectAnthony Liguori
This is mostly code movement although not entirely. This makes properties part of the Object base class which means that we can now start using Object in a meaningful way outside of qdev. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qom: add new command to search for typesAnthony Liguori
This adds a command that allows searching for types that implement a property. This allows you to do things like search for all available PCIDevices. In the future, we'll also have a standard interface for things with a BlockDriverState property that a PCIDevice could implement. This will enable search queries like, "any type that implements the BlockDevice interface" which would allow management tools to present available block devices without having to hard code device names. Since an object can implement multiple interfaces, one device could act both as a BlockDevice and a NetworkDevice. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-26add QERR_BASE_NOT_FOUNDMarcelo Tosatti
This qerror will be raised when a given streaming base (backing file) cannot be found. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add query-block-jobsStefan Hajnoczi
Add query-block-jobs, which shows the progress of ongoing block device operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_job_cancel commandStefan Hajnoczi
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_job_set_speed commandStefan Hajnoczi
Add block_job_set_speed, which sets the maximum speed for a background block operation. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_stream commandStefan Hajnoczi
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-18block: use proper qerrors in qmp_block_resizeStefan Hajnoczi
Let's report specific errors so that management tools and users can identify the problem. Two new qerrors are needed: * QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM * QERR_DEVICE_IS_READ_ONLY for EACCES Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert block_set_io_throttleLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert changeLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Introduce change-vnc-passwordLuiz Capitulino
New QMP command to change the VNC password. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert ejectLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert expire_passwordLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert set_passwordLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-15qom: qom_{get, set} monitor commands (v2)Anthony Liguori
This allows clients to read and write device model properties through QMP. QAPI doesn't support Visitor types yet and these commands are special in that they don't work with fixed types. I've added a documentation stub to qapi-schema.json so we can keep consistency there. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-15qmp: add qom-list commandAnthony Liguori
This can be used to list properties in the device model. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-06qapi: Convert migrate_set_speedLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert migrate_set_downtimeLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert migrate_cancelLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert human-monitor-commandLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert blockdev_snapshot_syncLuiz Capitulino
Unfortunately, this conversion required an additional change. In the old QMP command, the 'snapshot-file' argument is specified as optional. The idea is to take the snapshot internally if 'snapshot-file' is not passed. However, internal snapshots are not supported yet so the command returns a MissingParamater error if 'snapshot-file' is not passed. Which makes the argument actually required and will cause compatibility breakage if we change that in the future. To fix this the QAPI converted blockdev_snapshot_sync command makes the 'snapshot-file' argument required. Again, in practice it's actually required, so this is not incompatible. If we do implement internal snapshots someday, we'll need a new argument for it. Note that this discussion doesn't affect HMP. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert block_resizeLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert balloonLuiz Capitulino
Note that the command being dropped uses the deprecated MONITOR_CMD_ASYNC API, but the new command is a regular synchronous command. There shouldn't be visible differences though, as MONITOR_CMD_ASYNC is internal only. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert block_passwdLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert set_linkLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert inject-nmiLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert contLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert pmemsaveLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert memsaveLuiz Capitulino
Please, note that the QMP command has a new 'cpu-index' parameter. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-05hmp/qmp: add block_set_io_throttleZhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-27qapi: Convert query-pciLuiz Capitulino
This also fixes a bug with the old version: QMP would invert device id and vendor id. This would look ok on HMP because it was printing "device:vendor" instead of "vendor:device". Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-balloonLuiz Capitulino
Please, note that some of the code supporting memory statistics is still around (eg. virtio_balloon_receive_stats() and reset_stats()). Also, the qmp_query_balloon() function is synchronous and thus doesn't make any use of the (not fully working) monitor's asynchronous command support (the old non-qapi implementation did). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-spiceLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-vncLuiz Capitulino
There are three important remarks in relation to the non-qapi command: 1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc' commands to return an error when qemu is built without VNC support (ie. --disable-vnc). The non-qapi command would return the OK response in QMP and no response in HMP 2. The qapi version explicitly marks the fields 'host', 'family', 'service' and 'auth' as optional. Their are not documented as optional in the non-qapi command doc, but they would not be returned if vnc support is disabled. The qapi version maintains the same semantics, but documents those fields correctly 3. The 'clients' field, which is a list, is marked as optional but is always returned. If there are no clients connected an empty list is returned. This is not the Right Way to this in the qapi but it's how the non-qapi command used to work Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-blockstatsLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-blockLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-cpusLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert the cpu commandLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-migrateLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-miceLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert system_powerdownLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert system_resetLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert stopLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert quitLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert query-commandsLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>