aboutsummaryrefslogtreecommitdiff
path: root/pc-bios
AgeCommit message (Collapse)Author
2022-10-06pc-bios/vof: Adopt meson style Make outputPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-32-alex.bennee@linaro.org>
2022-10-06pc-bios/s390-ccw: Adopt meson style Make outputPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-31-alex.bennee@linaro.org>
2022-10-06pc-bios/optionrom: Adopt meson style Make outputPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-30-alex.bennee@linaro.org>
2022-10-06vof: add distclean targetPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AJB: add clean dep to distclean] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-16-alex.bennee@linaro.org>
2022-10-06pc-bios/s390-ccw: detect CC options just oncePaolo Bonzini
In preparation for adding Docker container support, detect compiler options just once rather than once per Make run; container startup overhead is substantial and doing the detection just once makes things faster. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-15-alex.bennee@linaro.org>
2022-10-06pc-bios/optionrom: detect CC options just oncePaolo Bonzini
In preparation for adding Docker container support, detect compiler options just once rather than once per Make run; container startup overhead is substantial and doing the detection just once makes things faster. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-14-alex.bennee@linaro.org>
2022-09-27configure: do not invoke as/ld directly for pc-bios/optionromPaolo Bonzini
Just use using the compiler binary, with -nostdlib in the case of the linker; the compiler driver (whether i686-*-gcc, or x86_64-*-gcc with the -m32 option) will then pick the right magic option to as and ld. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-27qboot: rebuild based on latest commitPaolo Bonzini
df22fbb751 ("qboot: update to latest submodule") updated the qboot submodule from a5300c49 to 8ca302e8. However, qboot isn't built during the QEMU's build process but rather is included in binary form. So rebuild it here. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> [Rebuilt it myself for paranoia. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-07roms/opensbi: Upgrade from v1.0 to v1.1Bin Meng
Upgrade OpenSBI from v1.0 to v1.1 and the pre-built bios images. The v1.1 release includes the following commits: 5b99603 lib: utils/ipi: Fix size check in aclint_mswi_cold_init() 6dde435 lib: utils/sys: Extend HTIF library to allow custom base address 8257262 platform: sifive_fu740: do not use a global in da9063_reset/shutdown fb688d9 platform: sifive_fu740: fix reset when watchdog is running 5d025eb lib: fix pointer of type 'void *' used in arithmetic 632f593 lib: sbi: Map only the counters enabled in hardware 3b7c204 lib: sbi: Disable interrupt during config matching a26dc60 lib: sbi: Disable interrupt and inhibit counting in M-mode during init 5d53b55 Makefile: fix build with binutils 2.38 6ad8917 lib: fix compilation when strings.h is included ce4c018 lib: utils/serial: Round UART8250 baud rate divisor to nearest integer 01250d0 include: sbi: Add AIA related CSR defines 8f96070 lib: sbi: Detect AIA CSRs at boot-time 65b4c7c lib: sbi: Use AIA CSRs for local interrupts when available 222132f lib: sbi: Add sbi_trap_set_external_irqfn() API 5f56314 lib: utils/irqchip: Allow multiple FDT irqchip drivers 1050940 include: sbi: Introduce nascent_init() platform callback 55e79f8 lib: sbi: Enable mie.MEIE bit for IPIs based on external interrupts. 9f73669 lib: utils/irqchip: Add IMSIC library 811da5c lib: utils/irqchip: Add FDT based driver for IMSIC 7127aaa lib: utils: Disable appropriate IMSIC DT nodes in fdt_fixups() 9979265 lib: utils/irqchip: Add APLIC initialization library 3461219 lib: utils/irqchip: Add FDT based driver for APLIC 8e2ef4f lib: utils: Disable appropriate APLIC DT nodes in fdt_fixups() 3a69cc1 lib: sbi: fix typo in is_region_subset f2ccf2f lib: sbi: verbose sbi_domain_root_add_memregion f3f4604 lib: sbi: Add a simple external interrupt handling framework 4998a71 lib: utils: serial: Initial commit of xlnx-uartlite 2dfbd3c lib: pmp_set/pmp_get moved errors from runtime to compile time b6b7220 firmware: Fix code for accessing hart_count and stack_size d552fc8 lib: Add error messages via conditional compilation for the future 555bdb1 include: Use static asserts for SBI_PLATFORM_xxx_OFFSET defines 1b42d3a include: Use static asserts for SBI_SCRATCH_xxx_OFFSET defines 7924a0b include: Use static asserts for FW_DYNAMIC_INFO_xxx_OFFSET defines 722f80d include: Add defines for [m|h|s]envcfg CSRs 31fecad lib: sbi: Detect menvcfg CSR at boot time 47d6765 lib: sbi: Enable Zicbo[m|z] extensions in the menvcfg CSR 794986f lib: sbi: Enable Svpbmt extension in the menvcfg CSR 499601a lib: sbi: Add Smstateen extension defines d44568a lib: sbi: Detect Smstateen CSRs at boot-time 3383d6a lib: irqchip/imsic: configure mstateen 5c5cbb5 lib: utils/serial: support 'reg-offset' property c1e47d0 include: correct the definition of MSTATUS_VS 9cd95e1 lib: sbi/hart: preserve csr validation value 4035ae9 docs: pmu: Improve the PMU DT bindings d62f6da lib: sbi: Implement Sstc extension 474a9d4 lib: sbi: Fix mstatus_init() for RV32 when Sscofpmf is not available e576b3e include: sbi: Define SBI_PMU_HW_EVENT_MAX to 256 b0c9df5 lib: sbi: Fix mhpmeventh access for rv32 in absence of sscofpmf 1a754bb lib: sbi: Detect and print privileged spec version 5a6be99 lib: sbi: Remove 's' and 'u' from misa_string() output 5b8b377 lib: sbi: Update the name of ISA string printed at boot time d4b563c lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features dbc3d8f lib: sbi: Remove MCOUNTINHIBT hart feature 97a17c2 lib: sbi: Remove MENVCFG hart feature a6ab94f lib: sbi: Fix AIA feature detection cad6c91 lib: sbi: Convert hart features into hart extensions be4903a lib: sbi: Detect hart features only once for each hart 994ace3 lib: sbi: Add sbi_hart_update_extension() function 023f0ad lib: sbi_platform: Add callback to populate HART extensions f726f2d Makefile: Allow generated C source to be anywhere in build directory 7fb474b Makefile: Add support for generating C array at compile time 73cf511 lib: utils/reset: Generate FDT reset driver list at compile-time 1e62705 lib: utils/serial: Generate FDT serial driver list at compile-time bfeb305 lib: utils/timer: Generate FDT timer driver list at compile-time 3a69d12 lib: utils/irqchip: Generate FDT irqchip driver list at compile-time 4ee0c57 lib: utils/ipi: Generate FDT ipi driver list at compile-time 998ed43 lib: utils/i2c: Generate FDT i2c adapter driver list at compile-time 4eacd82 lib: utils/gpio: Generate FDT gpio driver list at compile-time a3a3c60 platform: generic: Generate platform override module list at compile-time 9a7a677 platform: generic: Move Sifive platform overrides into own directory 851c14d lib: utils/irqchip: fix typo when checking for CPU node 90a9dd2 lib: utils/fdt: introduce fdt_node_is_enabled() 616da52 lib: utils: check if CPU node is enabled 575bb4e platform: generic: check if CPU node is enabled 1bc67db lib: utils/fdt: rename fdt_parse_max_hart_id f067bb8 lib: sbi: fix system_opcode_insn fab0379 lib: utils/fdt: Require match data to be const 295e5f3 lib: sbi_timer: Drop unnecessary get_platform_ticks wrapper ff65bfe lib: sbi_illegal_insn: Constify illegal_insn_table cb8271c lib: sbi_illegal_insn: Add emulation for fence.tso adc3388 lib: sbi_trap: Redirect exception based on hedeleg ce1d618 platform: generic: add overrides for vendor extensions b20ed9f lib: sbi_hsm: Call a device hook during hart resume 79e42eb lib: sbi_hsm: Assume a consistent resume address 2ea7799 lib: irqchip/plic: Constify plic_data pointers 8c362e7 lib: irqchip/plic: Factor out a context init function 415ecf2 lib: irqchip/plic: Add context save/restore helpers 2b79b69 lib: irqchip/plic: Add priority save/restore helpers 69be3df lib: utils/irqchip: Add FDT wrappers for PLIC save/restore functions 5e56758 lib: utils/irqchip: Add wrapper for T-HEAD PLIC delegation 9dc5ec5 platform: Add HSM implementation for Allwinner D1 551c70c include: sbi: Add mtinst/htinst psuedoinstructions 187127f lib: sbi: Fixup tinst for exceptions in sbi_misaligned_*() a07402a lib: sbi: Fix tval and tinst for sbi_get_insn() c653001 lib: utils: Remove CSRs that set/clear an IMSIC interrupt file bits 7738345 lib: utils/timer: Add a separate compatible for the D1 CLINT d76a196 lib: irqchip/plic: fix typo in plic_warm_irqchip_init 6f1fe98 lib: utils/timer: Remove Allwinner D1 CLINT compatibles c6fdbcf include: sbi: Change spec version to 1.0 3f66465 lib: pmu: allow to use the highest available counter 4489876 include: Bump-up version to 1.1 Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220713090613.204046-1-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-02Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingStefan Hajnoczi
* SCSI fixes for Mac OS 9 * Fix CPU reset for x86/KVM nested virtualization state * remove feature_not_found() from the configure script * Meson cleanups from muon * improved i386 TCG tests for BMI and SSE * SSE bugfixes # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmMQ+IQUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNofQgArLRlbhua699UyDkTEGGv+gBVRRKg # qJndTFJp5cvjJo3fNeE1XyZGY0PGLH09ilwHKnGqvn7Bc996ty6zi3sLDC+iT/SO # cRik6EVgZH/0QseYZijviuz7NklL8so/bgn7sORP9ibRWwiojBzm91emUt4X2l5N # WOmxLYNIPXR/G8LOSv5Dh4C4WXU3zuaLvTmg/fWPoWTF8P+9LU0gEKUzyk0jMJu4 # hb9lVLXyNbgEcdtK+VewWjsdJcdmF1tMAR94GTmbUdwxbwmATqX8w16jGUbnXPt2 # FZfmjS6CJO90uV7wBA91NnFlrJpWyDn1dKQ+ozpW0ZOAO+wfghpVq7/IRA== # =VRK4 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 01 Sep 2022 14:23:00 EDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (39 commits) target/i386: AVX+AES helpers prep target/i386: AVX pclmulqdq prep target/i386: Rewrite blendv helpers target/i386: Misc AVX helper prep target/i386: Destructive FP helpers for AVX target/i386: Dot product AVX helper prep target/i386: reimplement AVX comparison helpers target/i386: Floating point arithmetic helper AVX prep target/i386: Destructive vector helpers for AVX target/i386: Misc integer AVX helper prep target/i386: Rewrite simple integer vector helpers target/i386: Rewrite vector shift helper target/i386: rewrite destructive 3DNow operations target/i386: Add CHECK_NO_VEX target/i386: do not cast gen_helper_* function pointers target/i386: Add size suffix to vector FP helpers target/i386: isolate MMX code more target/i386: check SSE table flags instead of hardcoding opcodes target/i386: Move 3DNOW decoder target/i386: Rework sse_op_table6/7 ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-09-01meson: remove dead codePaolo Bonzini
Found with "muon analyze". Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-30pseries: Update SLOF firmware imageAlexey Kardashevskiy
The only change is that now SLOF can also boot big endian zImage but kernel-addr=0 is still required. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-07pc-bios/s390-ccw: Update the s390-ccw.img with the block size fixThomas Huth
The new binary now gets the block size of virtio-blk devices right. Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-08-07pc-bios/s390-ccw: Fix booting with logical block size < physical block sizeThomas Huth
For accessing single blocks during boot, it's the logical block size that matters. (Physical block sizes are rather interesting e.g. for creating file systems with the correct alignment for speed reasons etc.). So the s390-ccw bios has to use the logical block size for calculating sector numbers during the boot phase, the "physical_block_exp" shift value must not be taken into account. This change fixes the boot process when the guest hast been installed on a disk where the logical block size differs from the physical one, e.g. if the guest has been installed like this: qemu-system-s390x -nographic -accel kvm -m 2G \ -drive if=none,id=d1,file=fedora.iso,format=raw,media=cdrom \ -device virtio-scsi -device scsi-cd,drive=d1 \ -drive if=none,id=d2,file=test.qcow2,format=qcow2 -device virtio-blk,drive=d2,physical_block_size=4096,logical_block_size=512 Linux correctly uses the logical block size of 512 for the installation, but the s390-ccw bios tries to boot from a disk with 4096 block size so far, as long as this patch has not been applied yet (well, it used to work by accident in the past due to the virtio_assume_scsi() hack that used to enforce 512 byte sectors on all virtio-block disks, but that hack has been well removed in commit 5447de2619050a0a4d to fix other scenarios). Fixes: 5447de2619 ("pc-bios/s390-ccw/virtio-blkdev: Remove virtio_assume_scsi()") Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2112303 Message-Id: <20220805094214.285223-1-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-08-01misc: fix commonly doubled up wordsDaniel P. Berrangé
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220707163720.1421716-5-berrange@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-13pc-bios/s390-ccw: add -Wno-array-boundsPaolo Bonzini
The option generates a lot of warnings for integers casted to pointers, for example: /home/pbonzini/work/upstream/qemu/pc-bios/s390-ccw/dasd-ipl.c:174:19: warning: array subscript 0 is outside array bounds of ‘CcwSeekData[0]’ [-Warray-bounds] 174 | seekData->cyl = 0x00; | ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13datadir: Use bundle mechanismAkihiko Odaki
softmmu/datadir.c had its own implementation to find files in the build tree, but now bundle mechanism provides the unified implementation which works for datadir and the other files. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-12Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* fuzzing fixes (Alexander) * fix cross compilation CFLAGS and compiler choice * do not specify -bios option for tests/vm * miscellaneous fixes * preparation for pre-install tree in the build directory (Akihiko) # gpg: Signature made Tue 12 Jul 2022 13:47:19 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: meson: place default firmware path under .../share qga: Relocate a path emitted in the help text build: Do not depend on pc-bios for config-host.mak accel: kvm: Fix memory leak in find_stats_descriptors audio/dbus: fix building fuzz: only use generic-fuzz targets on oss-fuzz build: improve -fsanitize-coverage-allowlist check build: try both native and cross compilers configure: pass whole target name to probe_target_compiler tests/tcg: compile system emulation tests as freestanding configure: write EXTRA_CFLAGS for all sub-Makefiles configure: allow more host/target combos to use the host compiler configure, pc-bios/vof: pass cross CFLAGS correctly configure, pc-bios/s390-ccw: pass cross CFLAGS correctly configure, pc-bios/optionrom: pass cross CFLAGS correctly pc-bios/optionrom: use -m16 unconditionally scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216) tests/vm: do not specify -bios option Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # pc-bios/s390-ccw/netboot.mak
2022-07-06pc-bios/s390-ccw: Update the s390-ccw bios binaries with the virtio-blk fixesThomas Huth
The binaries have been recompiled with the fixes from the previous patches. Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/netboot.mak: Ignore Clang's warnings about GNU extensionsThomas Huth
When compiling the s390-ccw bios with Clang (v14.0), there is currently an unuseful warning like this: CC pc-bios/s390-ccw/ipv6.o ../../roms/SLOF/lib/libnet/ipv6.c:447:18: warning: variable length array folded to constant array as an extension [-Wgnu-folding-constant] unsigned short raw[ip6size]; ^ SLOF is currently GCC-only and cannot be compiled with Clang yet, so it is expected that such extensions sneak in there - and as long as we don't want to compile the code with a compiler that is neither GCC or Clang, it is also not necessary to avoid such extensions. Thus these GNU-extension related warnings are completely useless in the s390-ccw bios, especially in the code that is coming from SLOF, so we should simply disable the related warnings here now. Message-Id: <20220704111903.62400-13-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio: Remove "extern" keyword from prototypesThomas Huth
All the other protytpes in the headers here do not use the "extern" keyword, so let's unify this by removing the "extern" from the misfits, too. Message-Id: <20220704111903.62400-12-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio-blkdev: Request the right feature bitsThomas Huth
The virtio-blk code uses the block size and geometry fields in the config area. According to the virtio-spec, these have to be negotiated with the right feature bits during initialization, otherwise they might not be available. QEMU is so far very forgiving and always provides them, but we should not rely on this behavior, so let's better request them properly via the VIRTIO_BLK_F_GEOMETRY and VIRTIO_BLK_F_BLK_SIZE feature bits. Message-Id: <20220704111903.62400-11-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw: Split virtio-scsi code from virtio_blk_setup_device()Thomas Huth
The next patch is going to add more virtio-block specific code to virtio_blk_setup_device(), and if the virtio-scsi code is also in there, this is more cumbersome. And the calling function virtio_setup() in main.c looks at the device type already anyway, so it's more logical to separate the virtio-scsi stuff into a new function in virtio-scsi.c instead. Message-Id: <20220704111903.62400-10-thuth@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio: Beautify the code for reading virtqueue configurationThomas Huth
It looks nicer if we separate the run_ccw() from the IPL_assert() statement, and the error message should talk about "virtio device" instead of "block device", since this code is nowadays used for non-block (i.e. network) devices, too. Message-Id: <20220704111903.62400-9-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio: Read device config after feature negotiationThomas Huth
Feature negotiation should be done first, since some fields in the config area can depend on the negotiated features and thus should rather be read afterwards. While we're at it, also adjust the error message here a little bit (the code is nowadays used for non-block virtio devices, too). Message-Id: <20220704111903.62400-8-thuth@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio: Set missing status bits while initializingThomas Huth
According chapter "3.1.1 Driver Requirements: Device Initialization" of the Virtio specification (v1.1), a driver for a device has to set the ACKNOWLEDGE and DRIVER bits in the status field after resetting the device. The s390-ccw bios skipped these steps so far and seems like QEMU never cared. Anyway, it's better to follow the spec, so let's set these bits now in the right spots, too. Message-Id: <20220704111903.62400-7-thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio-blkdev: Remove virtio_assume_scsi()Thomas Huth
The virtio_assume_scsi() function is very questionable: First, it is only called for virtio-blk, and not for virtio-scsi, so the naming is already quite confusing. Second, it is called if we detected a "invalid" IPL disk, trying to fix it by blindly setting a sector size of 512. This of course won't work in most cases since disks might have a different sector size for a reason. Thus let's remove this strange function now. The calling code can also be removed completely, since there is another spot in main.c that does "IPL_assert(virtio_ipl_disk_is_valid(), ...)" to make sure that we do not try to IPL from an invalid device. Message-Id: <20220704111903.62400-6-thuth@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio-blkdev: Simplify/fix virtio_ipl_disk_is_valid()Thomas Huth
The s390-ccw bios fails to boot if the boot disk is a virtio-blk disk with a sector size of 4096. For example: dasdfmt -b 4096 -d cdl -y -p -M quick /dev/dasdX fdasd -a /dev/dasdX install a guest onto /dev/dasdX1 using virtio-blk qemu-system-s390x -nographic -hda /dev/dasdX1 The bios then bails out with: ! Cannot read block 0 ! Looking at virtio_ipl_disk_is_valid() and especially the function virtio_disk_is_scsi(), it does not really make sense that we expect only such a limited disk geometry (like a block size of 512) for our boot disks. Let's relax the check and allow everything that remotely looks like a sane disk. Message-Id: <20220704111903.62400-5-thuth@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/bootmap: Improve the guessing logic in zipl_load_vblk()Thomas Huth
The logic of trying an final ISO or ECKD boot on virtio-block devices is very weird: Since the geometry hardly ever matches in virtio_disk_is_scsi(), virtio_blk_setup_device() always sets a "guessed" disk geometry via virtio_assume_scsi() (which is certainly also wrong in a lot of cases). zipl_load_vblk() then sees that there's been a "virtio_guessed_disk_nature" and tries to fix up the geometry again via virtio_assume_iso9660() before always trying to do ipl_iso_el_torito(). That's a very brain-twisting way of attempting to boot from ISO images, which won't work anymore after the following patches that will clean up the virtio_assume_scsi() mess (and thus get rid of the "virtio_guessed_disk_nature" here). Let's try a better approach instead: ISO files always have a magic string "CD001" at offset 0x8001 (see e.g. the ECMA-119 specification) which we can use to decide whether we should try to boot in ISO 9660 mode (which we should also try if we see a sector size of 2048). And if we were not able to boot in ISO mode here, the final boot attempt before panicking is to boot in ECKD mode. Since this is our last boot attempt anyway, simply always assume the ECKD geometry here (if the sector size was not 4096 yet), so that we also do not depend on the guessed disk geometry from virtio_blk_setup_device() here anymore. Message-Id: <20220704111903.62400-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw/virtio: Introduce a macro for the DASD block sizeThomas Huth
Use VIRTIO_DASD_DEFAULT_BLOCK_SIZE instead of the magic value 4096. Message-Id: <20220704111903.62400-3-thuth@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06pc-bios/s390-ccw: Add a proper prototype for main()Thomas Huth
Older versions of Clang complain if there is no prototype for main(). Add one, and while we're at it, make sure that we use the same type for main.c and netmain.c - since the return value does not matter, declare the return type of main() as "void". Message-Id: <20220704111903.62400-2-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-06configure, pc-bios/vof: pass cross CFLAGS correctlyPaolo Bonzini
Use the flags passed to the configure script for the ppc cross compiler, which in fact default to those that are needed to get the 32-bit ISA. Add the endianness flag so that it remains possible to use a ppc64le compiler to compile VOF. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-06configure, pc-bios/s390-ccw: pass cross CFLAGS correctlyPaolo Bonzini
QEMU_CFLAGS is not available in pc-bios/s390-ccw/netboot.mak, but the Makefile needs to access the flags passed to the configure script for the s390x cross compiler. Fix everything and rename QEMU_CFLAGS to EXTRA_CFLAGS for consistency with tests/tcg. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-06configure, pc-bios/optionrom: pass cross CFLAGS correctlyPaolo Bonzini
The optionrom build is disregarding the flags passed to the configure script via --cross-cflags-i386. Pass it down and add it to the Makefile. This will make it possible to get the -m32 flag from $target_cflags to force a 32-bit build on 64-bit hosts, instead of supplying manually the arcane -Wa,-32 and linker emulation options. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-06pc-bios/optionrom: use -m16 unconditionallyPaolo Bonzini
Remove support for .code16gcc, all supported platforms have -m16. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-01configure: enable cross compilation of vofPaolo Bonzini
While container-based cross compilers are not supported, this already makes it possible to build vof on any machine that has an installation of GCC and binutils for 32- or 64-bit PowerPC. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220517092616.1272238-16-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220527153603.887929-27-alex.bennee@linaro.org>
2022-06-01configure: enable cross-compilation of optionromPaolo Bonzini
While container-based cross compilers are not supported, this already makes it possible to build x86 optionroms on any machine that has an installation of GCC and binutils for 32- or 64-bit x86. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220517092616.1272238-15-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220527153603.887929-26-alex.bennee@linaro.org>
2022-06-01configure: enable cross-compilation of s390-ccwPaolo Bonzini
While container-based cross compilers are not supported, this already makes it possible to build s390-ccw on any machine that has s390x GCC and binutils installed. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220517092616.1272238-14-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220527153603.887929-25-alex.bennee@linaro.org>
2022-06-01configure, meson: move symlinking of ROMs to mesonPaolo Bonzini
This is useful because pc-bios/meson.build already has a list of all ROM files, and thus does not need to use wildcards. The problems with wildcards are mentioned above the definition of the LINKS variable, but then the recommendation is disattended. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>
2022-06-01configure: do not define or use the CPP variablePaolo Bonzini
Just hardcode $(CC) -E, it should be enough. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220517092616.1272238-2-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220527153603.887929-13-alex.bennee@linaro.org>
2022-05-26New SeaBIOS-hppa version 6Helge Deller
Staring with SEABIOS_HPPA_VERSION 6 the serial ports are now emulated as on physical hardware, with LASI UART being serial port #0 and DINO UART as serial port #1. On older versions those ports were swapped. This SeaBIOS-hppa fix is needed to allow fixing the qemu serial pass-through from host to guest. Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-18Merge tag 'artist-cursor-fix-final-pull-request' of ↵Richard Henderson
https://github.com/hdeller/qemu-hppa into staging hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console This series updates the SeaBIOS-hppa firmware to version 5, in which additional HP fonts were added to the firmware and the firmware boot console was fixed to accept input from the emulated PS/2 keyboard when running in graphical mode (serial console was working before already). To test use the "-boot menu=on" qemu option. The artist graphics card driver got various fixes when running the X11-Windows on HP-UX: - fixes the horizontal and vertical postioning of the X11 cursor with HP-UX - allows X11 to blank the screen (e.g. screensaver) - allows the X11 driver to turn the X11 cursor on/off Signed-off-by: Helge Deller <deller@gmx.de> -- Changes compared to version 2 of this series: - Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland) Changes compared to version 1 of this series: - Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> - SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console) - integrated artist X11 X-cusor positioning fix (which was sent serperately before) -- This series should apply cleanly on git head and can be pulled for testing from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final # -----BEGIN PGP SIGNATURE----- # # iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP # X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd # 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY= # =ZrTm # -----END PGP SIGNATURE----- # gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa: artist: Fix X cursor position calculation in X11 artist: Emulate screen blanking artist: Allow to turn cursor on or off artist: Fix vertical X11 cursor position in HP-UX artist: Use human-readable variable names instead of reg_xxx artist: Introduce constant for max cursor size seabios-hppa: Update SeaBIOS-hppa to VERSION 5 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-16seabios-hppa: Update SeaBIOS-hppa to VERSION 5Helge Deller
New features and fixes in SeaBIOS for hppa/parisc: * STI firmware now contains additional fonts built-in, which can be selected with qemu command-line options: -fw_cfg opt/font,string=1 - a HP 8x16 font -fw_cfg opt/font,string=2 - a HP 6x13 font -fw_cfg opt/font,string=3 - a HP 10x20 font -fw_cfg opt/font,string=4 - a Linux 16x32 font * Fixed PS/2 keyboard emulation when running in graphical mode. This allows to type boot commands in the firmware boot menu if qemu was started with "-boot menu=on" (and no linux kernel was given on the qemu command line). * Fix firmware rendenzvous code to clear all pending external intrrupts before entering the waiting loop. Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-12pc-bios/optionrom: compile with -Wno-array-boundsPaolo Bonzini
Avoids the following bogus warning: pvh_main.c: In function ‘pvh_load_kernel’: pvh_main.c:101:42: warning: array subscript 0 is outside array bounds of ‘uint16_t[0]’ {aka ‘short unsigned int[]’} [-Warray-bounds] 101 | uint32_t ebda_paddr = ((uint32_t)*((uint16_t *)EBDA_BASE_ADDR)) << 4; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12pc-bios/optionrom: detect -fno-piePaolo Bonzini
Do not rely on the detection that was done in the configure script, since in the future we may want to cross-compile this file. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20ppc/pnv: Update skiboot to v7.0Joel Stanley
This is skiboot 7.0 (commit 76b349cf7b40). Built using gcc 11.2.0 and binutils 2.38. Changes since the previous version: Christophe Lombard (15): npu2: move opal api pau: introduce support rainier: detect pau devices pau: assign bars pau: create phb pau: enabling opencapi pau: translation layer configuration pau: enable interrupt on error pau: complete phb ops pau: hmi scom dump pau: phy init pau: link training pau: update current opal call functions pau: mmio invalidates pau: Add support for OpenCAPI Persistent Memory devices. Cédric Le Goater (4): xive/p10: Fix xive_special_cache_check when DEBUG=1 xive/p10: Fix mismatch errors when DEBUG=1 interrupts: Do not advertise XICS support on P10 skiboot v6.6.6 release notes Frederic Barrat (6): phb4/5: Escalate page-level TCE kills npu3: Remove GPU support on Swift phb5: Remove obsolete capp-related properties xive/p10:: Declare xive2 DT node as an interrupt-controller skiboot v6.0.24 release notes opal-api: Drop diagnostics data type symbol for PHB5 Michael Ellerman (3): external/mambo: Print more info when the kernel is too big doc: Make it clear all existing platforms use Power9N docs: Add Swift, Mowgli & Rainier Nicholas Piggin (12): external/mambo: Updates for POWER10 configuration for DD2.0 external/mambo: Updates POWER9 SIM_CTRL1 to remove hardware atomic RC external/mambo: Add POWER10 small-core mode HBRT: fix clobbered r16 when host services handlers are called interrupts: add_opal_interrupts avoid NULL dereference on P10 mambo cpu: cpu_idle_job SMT priority fix cpu: add debug check in cpu_relax asm/head: Fix P10 HILE for little endian build phb4: annotate tbl_pest with endian types Remove support for POWER8 DD1 phb3: make endian-clean flash: AST BMC endian fixes Nick Child (1): secvar: Free md context on hash error Ryan Grimm (1): AWAN simulator support for P10 Vasant Hegde (5): ci: Bump qemu version hello_world: Add p10 mambo tests skiboot v6.7.3 release notes skiboot v6.8.1 release notes skiboot v7.0 release notes Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-03-24build: disable fcf-protection on -march=486 -m16Christian Ehrhardt
Some of the roms build with -march=i486 -m16 which is incompatible with -fcf-protection. That in turn is can be set by default, for example in Ubuntu [1]. That causes: cc1: error: ‘-fcf-protection’ is not compatible with this target This won't work on -march=i486 -m16 and no matter if set or not we can override it to "none" if the option is known to the compiler to be able to build reliably. Fixes: https://gitlab.com/qemu-project/qemu/-/issues/889 [1]: https://wiki.ubuntu.com/ToolChain/CompilerFlags#A-fcf-protection Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220323090713.1002588-1-christian.ehrhardt@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15edk2: update binaries to stable202202Gerd Hoffmann
The switch to edk2 RELEASE builds changes the memory layout a bit, resulting in a acpi table change. DefinitionBlock ("", "SSDT", 1, "BOCHS ", "NVDIMM", 0x00000001) { Scope (\_SB) { Device (NVDR) { Name (_HID, "ACPI0012" /* NVDIMM Root Device */) // _HID: Hardware ID Method (NCAL, 5, Serialized) { Local6 = MEMA /* \MEMA */ { Return (NCAL (Arg0, Arg1, Arg2, Arg3, 0x02)) } } Device (NV02) { Name (_ADR, 0x03) // _ADR: Address Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Return (NCAL (Arg0, Arg1, Arg2, Arg3, 0x03)) } } } } - Name (MEMA, 0x43D10000) + Name (MEMA, 0x43F50000) } Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-03-09Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-20220308' ↵Peter Maydell
into staging qemu-openbios queue # gpg: Signature made Tue 08 Mar 2022 08:05:09 GMT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-openbios-20220308: roms/openbios: update OpenBIOS images to 0e0afae6 built from submodule Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-07roms/openbios: update OpenBIOS images to 0e0afae6 built from submoduleMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 17:50:19 +0000