Age | Commit message (Collapse) | Author |
|
Update OpenSBI and the pre-built opensbi32 and opensbi64 images to
v1.5.
The following commits were included in v1.5:
455de67 include: Bump-up version to 1.5
23b7bad lib: sbi: check incoming dbtr shmem address
0e45b63 docs: Fix wrong filename
caae2f7 lib: sbi: fwft: return SBI_EINVAL rather than SBI_ERR_INVALID_PARAM
e8717d1 lib: sbi: fwft: check feature value to be exactly 1 or 0
ecef14d lib: sbi: implement SBI FWFT extension
e9ee967 lib: sbi: fwft: add support for SBI_FWFT_PTE_AD_HW_UPDATING
c97a1d5 lib: sbi: fwft: add support for SBI_FWFT_MISALIGNED_EXC_DELEG
aa5a859 lib: sbi: add support for firmware features extension
53844c9 lib: sbi: Add support for Svade and Svadu extensions
52dcf35 platform: generic: andes: Add support for RV32 to set up PMA
f09f164 platform: generic: andes: Refine Andes PMA related code
7830e98 lib: serial: fix RX path in litex-uart
62e178a lib: utils/reset: Try initializing all reset devices in dt
3a94a32 sbi: sbi_domain_context: Fix trap context for domain context switching
a73ff04 lib: utils/reset: Fix fdt_reset to search for more dt nodes
b5c984b lib: utils/reset: Skip initialize reset when dt is not enabled
86bbe6c lib: utils/serial: Fix fdt_serial to match more dt nodes
179e00a lib: utils/serial: Skip initialize serial when dt is not enabled
b1c7c75 lib: utils/irqchip: Skip initialize irqchip when dt is not enabled
5e3ad7d lib: utils/timer: Skip initialize timer when dt is not enabled
c5be0e1 lib: utils/ipi: Skip initialize ipi when dt is not enabled
df3db6a lib: utils/fdt: Fix DT property for APLIC delegation
d962db2 lib: utils/gpio: respect flag GPIO_FLAG_ACTIVE_LOW
ae5ef18 lib: sbi: sse: handle missing writable attributes
858754a lib: utils/irqchip: Add sanity checks in imsic_get_data() and imsic_get_target_file()
96f0a2e firmware: Bring back FW_TEXT_START as an optional parameter
e3a30a2 lib: utils/irqchip: Check before initializing imsic
2bed4c1 platform: generic: thead: add Sophgo CV18XX/SG200X series
533067d lib: sbi: Put event after use in sbi_sse_exit() loop
ea9cf6a utils/reset: Add SG2042 hwmon MCU support.
1cb792d lib: sbi: simplify inline function in sbi_dtbr.c
7b37da3 lib: sbi: fix return type of sbi_dbtr_shmem_disabled
e065c3c lib: sbi: Fixed memory permission check in sbi_dbtr_setup_shmem
7f54527 lib: sbi: fix DBTR_SHMEM_MAKE_PHYS for RV64
744f495 lib: sbi: Removal unnecessary check dbtr_thishart_state_ptr
4953bd7 lib: sbi: fix hart_shmem_base
019a8e6 platform: generic: thead: add Canaan Kendryte K230
33e21c9 platform: generic: thead: separate T-Head PMU Errata
2b93ce0 platform: andes: Change all occurrences of andes45 to andes
f68b3ae platform: andes: Rename files with the prefix andes45
17e8291 sbi: sbi_domain_context: Add spinlock for updating domain assigned_harts
1d89a9d lib: sbi: Refine the settings for switching to Virtual Supervisor Mode.
033104d lib: sbi: sse: check handler entry to belong to supervisor mode
bd00765 lib: sbi: sse: use PRV_S instead of hardcoded value for mode
ce3c82c lib: sbi: sse: call enable callback before sending IPI
d528dbf lib: sbi: sse: remove superfluous sbi_list_empty() check
22ff750 lib: sbi: sse: simplify 32bits overflow check
7aa80ea lib: sbi: sse: rename sse_hart_unlock() to sse_enabled_event_unlock()
c21c99d lib: sbi: sse: fix typos, comments and spacing errors
7b1ed96 lib: tests: Add test for spinlocks
7bdf41a lib: tests: Add test for atomic_t
f6243d9 lib: tests: Add test suite init function
d4d2582 firmware: remove FW_TEXT_START
73344d4 lib: utils: check correct value in fdt_node_offset_by_compatible
37e1544 lib: sbi: sse_event_get() may return NULL
68bc031 lib: sbi: Add missing sscrind and sscfg extensions in sbi_hart_ext[]
a7c5c2c Makefile: Remove unnecessary dependencies
268feab Makefile: Respect manual changes to .config
29ecda9 sbi: sbi_domain_context: Check privilege spec version before accessing S-mode CSRs
7862c24 lib: sbi: Wakeup non-coldboot HARTs early in the coldboot path
beb0cd1 lib: sbi: Simplify wait_for_coldboot() implementation
f5375bc platform: generic: allwinner: Optimize current hart scratch access
b94396c lib: utils/timer: Optimize current hart scratch access
5c9a735 include: sbi: Support byteorder macros in assembly
06fc453 lib: sbi: Add SSE support for PMU events
09ad214 lib: sbi: Implement SBI SSE extension
c8cdf01 lib: sbi: Add support for Supervisor Software Events extension
76d7e9b firmware: remove copy-base relocation
5186da6 platform: generic: allwinner: sun20i-d1: Remove duplicated CSR definitions
3b2f89e docs: writing_tests: Make docs correspond the latest changes
f7d0050 lib: sbi: Extend sbi_trap_error() to dump state in a nested trap
5b11f16 lib: sbi: Pass trap context pointer to sbi_ecall_handler()
43d346c lib: sbi: Remove regs parameter from trap irq handling functions
d84e7eb lib: sbi: Remove regs paramter of sbi_irqchip_process()
f414cf9 lib: sbi: Simplify parameters of sbi_illegal_insn_handler()
fea33a9 lib: sbi: Simplify parameters of misaligned and access fault handlers
abea949 lib: sbi: Introduce trap context
60ffc15 include: sbi: Add trap_context pointer in struct sbi_scratch
ebb697a lib: sbi: Remove sbi_trap_exit() and related code
2e85178 lib: sbi: Remove epc from struct sbi_trap_info
86224ec docs/writing_tests: Update tests paths
5c992a1 lib: tests: Move tests to a separate directory
81e3ba7 lib: sbi: call platform load/store emulators
ddf3b64 include: sbi: add emulate_load/store handler to platform ops
4c11265 lib: sbi: abstract out insn decoding to unify mem fault handlers
9221fe5 lib: sbi: change prototype of sbi_misaligned_load/store_handler
a17600c lib: sbi: change prototype of sbi_trap_redirect
2471cf2 include: sbi: rename sbi_misaligned_ldst.h to sbi_trap_ldst.h
c0a6320 lib: sbi: rename sbi_misaligned_ldst.c to sbi_trap_ldst.c
e11025c lib: sbi: Add initial domain context management support
87d8fe7 lib: tests: Add sbi_console test
e5f53fd lib: tests: Add a test for sbi_bitmap
874fcef lib: Add SBIUnit testing macros and functions
b9e4de0 docs: Add documentation about tests and SBIUnit
526b9ce firmware: fw_base.S: fix _reset_regs
8151105 firmware: fw_base.S: Remove _relocate_lottery
187397f firmware: fw_dynamic.S: Remove _bad_dynamic_info
b27b7c6 firmware: fw_base: Simplified setup trap handler
fdf5589 firmware: fw_base.S: Simplify address get
748bef1 lib: sbi_misaligned_ldst: Add handling of C.LHU/C.LH and C.SH
bc36678 platform: andes: Drop andes_pmu_setup()
6bb6b61 lib: sbi: Add support for smcsrind and smcdeleg
322b598 lib: sbi_hsm: Restor hart state to stop when fails to start
96a35db docs/firmware: document new options for jump and payload firmwares
2cff7f3 platform: Apply relocatable address
f056939 firmware: Add relocatable FW_PAYLOAD_FDT_ADDR
7227cdd firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR
741e941 platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()
3edf044 platform: starfive: return error if needed devices are not present
80ae046 platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"
5335340 platform: starfive: remove redundant compatibility check in pmic_ops
4d8569d platform: starfive: get I2C offset address from clocks property
034af1f platform: starfive: correct system clock device tree node
88273fe lib: sbi_pmu: Before using we should ensure PMU init done
46c8c65 docs: move documentation of system suspend test.
8df836d platform: generic: Parse system suspend test from config node.
23e7e48 docs: Add OpenSBI DT configuration guide.
67ce5a7 platform: generic: Add support for specify coldboot harts in DT
9c8b18e firmware: fw_base.S: remove _runtime_offset
4c6b7cb firmware: fw_base.S: Improve loading u32
92e8aff firmware: always create dynsym section
d1dad07 Makefile: check for --exclude-libs
4a76f79 Makefile: don't pass -mstrict-align if not supported
21caaa3 fw_base.S: Fix comment errors
1ec353d lib: sbi: Use mask to check the free bit during trigger allocation
bb90a9e lib: sbi: Print number of debug triggers found
76a2a15 lib: sbi: Implement SBI debug trigger extension
fa87ec9 include: sbi: Add SBI debug trigger extension related defines
97f234f lib: sbi: Introduce the SBI debug triggers extension support
40dac6b lib: sbi: Detect support of debug triggers
2499769 include: sbi: Introduce debug trigger register encodings
20ca19a include: sbi: Add TINFO debug trigger CSR
b752099 include: sbi: Introduce common endianess conversion macro
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715171521.179517-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The -Wl,-pie and -nostdlib flags are added to LDFLAGS twice. Merge
the two lines to get rid of the duplicates.
Message-ID: <20240621082422.136217-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Rebuilt with latest build configuration
and up-to-date toolchain setup.
No source code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240314115307.628118-6-kraxel@redhat.com>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Add the missing 64-bit hppa firmware blob so that it gets installed.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 7c0dfcf9395e ("target/hppa: Update SeaBIOS-hppa to version 16")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
https://gitlab.com/kraxel/qemu into staging
firmware: update to edk2-stable202402
Update edk2 to the latest release tagged end of last week.
Cc stable this time because we should move away from the
git snapshot update done in January.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmXctQ0ACgkQTLbY7tPo
# cTjOkA/+OIMaKRl+ZQAQQYlfLoJK/XK51QHyZugzehWs1o5LBHh4aWrtcxTLhPQb
# Zvofzm59XNb5drBuZIZbdso6hFt7jZbzw7VsIJW/CFlqIJTGDffdmmJzPoGVoHlj
# SX9aVFlLT2Gu5qlRG5yaZKQF3gnJDKmOSfM8DJxu9yvxcY+Y812k1LV1M0zoedBR
# gx2283UISUQcT/3iazCWRpJVxV60i7iN4BsHUUgiJNOUIlMoNeFPZxL2OZl4m72+
# bA0EklTgMcCesctsDQvF+Ql30mY/KTtK7CtEhVvB13n87sDj73YuQng9lsL4x2oY
# NiokFlTKbvoDek4hjuyfHuf8MwwFPUHMHTFa5A61Er4UaiejgNE1I6rnyoIDAKz/
# bcZm3jYlu4La32mVsXyVxW+5812cR0PE6hZqBPvyMl2VtXhWTXLMjseTM8TzHo5a
# u/CYvKF7gDppoaPsy/sASC4Q4ko49U83BYC/ftJQHBmkIslI1jeP9wfqXOQk40Cn
# H/GyfTQZvam9Al6nxh++cU3cUoux3YQpNW5RE5Au4qizH/kyO8vFHPs4e4jbaOlc
# pI5g2bQESMM14tR5xEN5EKuxs0+GOlnzziCsWaVjBCU7s6YsFHclLSK/0zf2RUas
# uNiI6jjsgojUfpm896Xp6zaXUDWiQ6oyMdFBa72S8XJmzOufPV0=
# =4SrN
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Feb 2024 15:58:05 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'edk2-stable202402-20240226-pull-request' of https://gitlab.com/kraxel/qemu:
update edk2 binaries to edk2-stable202402
update edk2 submodule to edk2-stable202402
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This includes a number of improvements and fixes. Importantly there
is a change for QEMU platforms to permit the ChipTOD to be initialised
if it is present in the device tree. This will facilitate ChipTOD
enablement in pnv.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
SeaBIOS-hppa version 16 news & enhancements:
- Initial 64-bit firmware release
- Added fault handler to catch and report firmware bugs
- Use Qemu's builtin_console_out() via diag 0x101
- parisc-qemu-install Makefile target to install firmware in qemu
- Added -fw_cfg opt/OS64,string=3 option
Fixes:
- Avoid crash when booting without SCSI controller
- Avoid possible crashes while detecting LASI LAN & graphics
- Don't check layers in PDC_MEM_MAP_HPA, fixes NetBSD
- Ensure cache definition does not trigger endless loops
- Mark B160L as 32-bit machine in inventory
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
|
|
https://github.com/hdeller/qemu-hppa into staging
target/hppa qemu v8.2 regression fixes
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
# X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
# nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
# =FAMY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 Jan 2024 05:57:17 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 15
target/hppa: Fix IOR and ISR on error in probe
target/hppa: Fix IOR and ISR on unaligned access trap
target/hppa: Export function hppa_set_ior_and_isr()
target/hppa: Avoid accessing %gr0 when raising exception
hw/hppa: Move software power button address back into PDC
target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
hw/hppa/machine: Disable default devices with --nodefaults option
hw/hppa/machine: Allow up to 3840 MB total memory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
SeaBIOS-hppa version 15:
- Fix OpenBSD 7.4 boot (PDC_MEM_MAP call returned wrong values)
SeaBIOS-hppa version 14 comes with those fixes:
- Fix 32-bit HP-UX crash (fix in PDC_FIND_MODULE call)
- Fix NetBSD boot (power button fix and add option to disable it)
- Fix FPU detection on NetBSD
- Add MEMORY_HPA module on B160L
- Fix detection of mptsas and esp scsi controllers
- Fix terminate DMA transfer in esp driver (Mark Cave-Ayland)
- Allow booting from esp controller
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
https://gitlab.com/kraxel/qemu into staging
edk2: update to git snapshot (maybe for-8.2)
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmV5i70ACgkQTLbY7tPo
# cTg5mA//VDjGNmBYWhIhf5c7Z8+h1FspnqkxqResX3KgE2indCWkTlyZnCFGb7CO
# NgDiCR7xKMw9S1Cun14vTs/OK8BVFvmXGhTIgjecK+k6w6D8PtR4QvfXYUKxNajA
# Sd6reWAlojlgKOkpcrejrSSvtBTZqrJc8CrkowMR3FZXzD0GstUCMZ0jBvVhzlO6
# o9RMk0kbf+VNupsA+v9ZWPstMHXjLKs8v1eUqrc6LYOanY6mqQM5Wz9yWteUfrNp
# /0zShBrkmB+BgPoRQypphFdXRacP82fVXDMeTSbbXaReI0PR9MLKZnyk0UUkES6k
# BTtEVEM0cCAYLGaGFjHZVEpbrtFmVBisE0fLgdozsCU8SMCuxjNzXyj0HGRsJ7m4
# UQ+qGJLOR3Zx/Bnz3LLKOmWBlq6MQD5lYgxk3dwSPKzXTqun1ndlVKenJ3Z9fgXQ
# gibVbS/2fNylR9aoPSYkXnlE8l8vSo24sXIn8R2wX8rJ0xBc6bFDs1MKizzv2b9l
# YUeybDwgDvbbDLGSN4DgIeNSZxQBgNO/nmuFnx8jNxTqcNlCJFHO2jR7gPijj5ct
# ZPQQwLCCEIxD3OY3Dg94zXDm1EfWZQpNBFDD/83joJt/15Vu9GLsPqEs4QUdiQsp
# MO4Bd7HFavLSGsyX1rMe0yonWirbRX2uKYmyc+KwGjjS9LRGesU=
# =bcZj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Dec 2023 10:47:25 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu:
tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes
tests/acpi: update expected data files
edk2: update binaries to git snapshot
edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE.
edk2: update to git snapshot
tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Upgrade OpenSBI from v1.3.1 to v1.4 and the pre-built bios images.
The v1.4 release includes the following commits:
1a398d9 lib: sbi: Add Zicntr as a HART ISA extension
669089c lib: sbi: Add Zihpm as a HART ISA extension
72b9c8f lib: sbi: Alphabetically sort HART ISA extensions
5359fc6 lib: sbi: Rename hart_pmu_get_allowed_bits() function
976895c lib: sbi: Fix Priv spec version for [m|s]counteren and mcountinhibit CSRs
6053917 lib: sbi: Fix how print gets flags
35ef182 lib: sbi: print not fill '0' when left-aligned
40dac06 lib: sbi: Add '+' flags for print
458fa74 lib: sbi: Add ' ' '\'' flags for print
05cbb6e lib: sbi: implifying the parameters of printi
fe08281 lib: sbi: print add 'o' type
c6ee5ae lib: sbi: Fix printi
3b6fcdd lib: sbi: Simplify prints
cc89fa7 lib: sbi: Fix printc
ff43168 lib: sbi: Fix timing of clearing tbuf
a73982d lib: sbi: Fix missing '\0' when buffer szie equal 1
ea6533a lib: utils/gpio: Fix RV32 compile error for designware GPIO driver
c3b98c6 include: sbi: Add macro definitions for mseccfg CSR
1c099c4 lib: sbi: Add functions to manipulate PMP entries
6c202c5 include: sbi: Add Smepmp specific access flags for PMP entries
cbcfc7b lib: sbi: Add smepmp in hart extensions
d72f5f1 lib: utils: Add detection of Smepmp from ISA string in FDT
4a42a23 lib: sbi: Grant SU R/W/X permissions to whole memory
f3fdd04 lib: sbi: Change the order of PMP initialization
5dd8db5 lib: sbi: Add support for Smepmp
6e44ef6 lib: sbi: Add functions to map/unmap shared memory
0ad8660 lib: sbi: Map/Unmap debug console shared memory buffers
057eb10 lib: utils/gpio: Fix RV32 compile error for designware GPIO driver
0e2111e libfdt: fix SPDX license identifiers
e05a9cf lib: sbi: Update system suspend to spec
5e20d25 include: sbi: fix CSR define of mseccfg
44c5151 include: sbi_utils: Remove driver pointer from struct i2c_adapter
14a35b0 lib: utils/regmap: Add generic regmap access library
8e97275 lib: utils/regmap: Add simple FDT based regmap framework
f21d8f7 lib: utils/regmap: Add simple FDT based syscon regmap driver
4a344a9 lib: utils/reset: Add syscon based reboot and poweroff
c2e6027 lib: utils/reset: Remove SiFive Test reset driver
f536e0b gitignore: allow gitignore to ignore most dot file
c744ed7 lib: sbi_pmu: Enable noncontigous hpm event and counters
6259b2e lib: utils/fdt: Fix fdt_parse_isa_extensions() implementation
f46a564 lib: sbi: Fix typo for finding fixed event counter
94197a8 fw_base.S: Fix assembler error with clang 16+
c104c60 lib: sbi: Add support for smcntrpmf
7aabeee Makefile: Fix grep warning
e7e73aa platform: generic: allwinner: correct mhpmevent count
ee1f83c lib: sbi_pmu: remove mhpm_count field in hart feature
a9cffd6 firmware: payload: test: Change to SBI v2.0 DBCN ecalls
b20bd47 lib: sbi: improve the definition of SBI_IPI_EVENT_MAX
664692f lib: sbi_pmu: ensure update hpm counter before starting counting
c9a296d platform: generic: allwinner: fix OF process for T-HEAD c9xx pmu
901d3d7 lib: sbi_pmu: keep overflow interrupt of stopped hpm counter disabled
cacfba3 platform: Allow platforms to specify the size of tlb fifo
5bd9694 lib: sbi: alloc tlb fifo by sbi_malloc
130e65d lib: sbi: Implement SET_FS_DIRTY() to make sure the mstatus FS dirty is set
d1e4dff lib: sbi: Introduce HART index in sbi_scratch
e6125c3 lib: sbi: Remove sbi_platform_hart_index/invalid() functions
296e70d lib: sbi: Extend sbi_hartmask to support both hartid and hartindex
e632cd7 lib: sbi: Use sbi_scratch_last_hartindex() in remote TLB managment
78c667b lib: sbi: Prefer hartindex over hartid in IPI framework
22d6ff8 lib: sbi: Remove sbi_scratch_last_hartid() macro
112daa2 lib: sbi: Maximize the use of HART index in sbi_domain
9560fb3 include: sbi: Remove sbi_hartmask_for_each_hart() macro
b8fb96e include: sbi_domain: Fix permission test macros
bff27c1 lib: sbi: Factor-out Smepmp configuration as separate function
5240d31 lib: sbi: Don't clear mseccfg.MML bit in sbi_hart_smepmp_configure()
2b51a9d lib: sbi: Fix pmp_flags for Smepmp read-only shared region
73aea28 lib: sbi: Populate M-only Smepmp entries before setting mseccfg.MML
e8bc162 lib: utils/serial: Add shared regions for serial drivers
b7e9d34 lib: utils/regmap: Mark syscon region as shared read-write
3669153 platform: generic: thead: fix stale TLB entries for th1520/sg2042
de525ac firmware: Remove ALIGN in .rela.dyn in linker script
2a6d725 firmware: Remove handling of R_RISCV_{32,64}
6ed125a Makefile: Add --exclude-libs ALL to avoid .dynsym
e21901d doc: Fix fw_payload.md
a125423 lib: utils/serial: Ensure proper allocation of PMP entries for uart8250
d36709f lib: utils: timer/ipi: Update memregion flags for PLMT and PLICSW
8197c2f lib: sbi: fix sbi_domain_get_assigned_hartmask()
9da30f6 lib: utils/fdt: simplify dt_parse_isa_extensions
942aca2 lib: utils: Simplify SET_ISA_EXT_MAP()
f831b93 lib: sbi_pmu: check for index overflows
d891cae gpio/starfive: redundant readl() call
e8114c6 docs: platform: update platform_requirements.md
3632f2b lib: sbi: Add support for mconfigptr
ec0559e lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP
cbdd869 include: sbi: Change spec version to 2.0
5d0ed1b lib: sbi: simplify sanitize_domain()
c1a6987 platform: generic: thead: move to thead c9xx header to vendor specific postion
8e941e7 platform: generic: thead: separate implement of T-HEAD c9xx pmu
492d9b1 platform: generic: thead: separate implement of T-HEAD c9xx errata
3e21b96 platform: generic: thead: initialize PMU by default in thead generic platform
a140a4e lib: sbi: Correctly limit flushes to a single ASID/VMID
88ae718 platform: generic: thead: improve tlb flush errata
52fd64b platform: Uses hart count as the default size of tlb info
07f2ccd lib: utils/serial: Optimize semihosting_putc implementation
fccdf41 firmware: fw_base.S: Fix boot hart status synchronization
d1e0f7f utils/reset: Remove fdt_reset_thead
896d2c9 lib: utils/timer: Allow ACLINT MTIMER driver to setup quirks
accafb1 lib: utils/timer: mtimer: add separate T-Head C9xx CLINT mtimer compatible
98bc25f lib: utils/ipi: mswi: add separate T-Head C9xx CLINT mswi compatible
5b2f55d lib: sbi: separate the swap operation of domain region
3b03cdd lib: sbi: Add regions merging when sanitizing domain region
2bfdb9e platform: generic: Add Sophgo sg2042 platform support
280f7ae include: sbi: macros for mseccfg.sseed and .useed
efcac33 lib: sbi: Add Zkr in hart extensions
6e5b0cf lib: sbi: enable seed access in S-mode
6602e11 lib: sbi: change sbi_hart_features.extensions as an array
3aaed4f lib: sbi: Make console_puts/console_putc interchangeable
dc0bb19 lib: utils/serial: remove semihosting_putc
16bb930 lib: sbi: Fix PMP granularity handling in sbi_hart_map_saddr()
574b9c8 lib: sbi_pmu: avoid buffer overflow
791704c lib: utils/irqchip: Avoid redundant writes to APLIC CLRIE register
f520256 lib: sbi: Allow relaxed MMIO writes in device ipi_send() callback
b70d628 lib: sbi: Allow relaxed MMIO writes in device ipi_clear() callback
bd74931 lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme
291403f sbi: sbi_pmu: Improve sbi_pmu_init() error handling
090fa99 lib: sbi: Add XAndesPMU in hart extensions
a48f2cf sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device
51ec60c platform: include: andes45: Add PMU related CSR defines
effd89a platform: generic: Introduce pmu_init() platform override
1b9e743 platform: andes: Add Andes custom PMU support
2e50c24 platform: andes: Enable Andes PMU for AE350
535c661 platform: rzfive: Enable Andes PMU for RZ/Five
0b3262e lib: utils: fdt_fixup: Allow preserving PMU properties
009ae4e platform: andes: Factor out is_andes() helper
0308f93 lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable
e19d419 lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table
d162009 docs: pmu: Add Andes PMU node example
6b9a849 lib: sbi: Remove xchg/cmpxchg implemented via lr/sc
11bf49b lib: sbi: Fix __atomic_op_bit_ord and comments
8839869 lib: sbi: Replace __atomic_op_bit_ord with __atomic intrinsics
07419ec lib: sbi: Prevent redundant sbi_ipi_process
93da66b lib: sbi_hart: Store PMP granularity as log base 2
ee72517 lib: sbi_pmu: Add PMU snapshot definitions
11a0ba5 lib: sbi_pmu: Fix the counter info function
0696810 firmware: fix section types
a25fc74 lib: sbi_hsm: Put the resume_pending hart in the interruptible hart mask
87aa306 platform: recalculate heap size to support new tlb entry number
a2e254e lib: sbi: skip wait_for_coldboot when coolboot done
6112d58 lib: utils/fdt: Allow to use reg-names when parsing ACLINT
35cba92 lib: sbi_tlb: Check tlb_range_flush_limit only once per request
a894187 lib: sbi_ipi: Do not ignore errors from sbi_ipi_send()
446fa65 lib: sbi_ipi: Process self-IPIs in sbi_ipi_send()
2707250 lib: sbi_ipi: Drop unnecessary ipi_process check
925ce14 lib: sbi: Simplify the initialization of root_hmask in sbi_domain_init
2c8be56 lib: sbi: Improve the code of privilege mode and extensions detection
056fe6f lib: sbi: Refactor the code for enable extensions in menvfg CSR
776770d lib: sbi: Using one array to define the name of extensions
3daac8f lib: sbi: Detect extensions from the ISA string in DT
416ceb3 lib: sbi_tlb: Reduce size of struct sbi_tlb_info
80169b2 platform: generic: Fine tune fw_platform_calculate_heap_size()
cdebae2 lib: utils/irqchip: Add shared MMIO region for PLIC in root domain
3284bea lib: sbi: Allow ecall handlers to directly update register state
5a57e8c lib: sbi: Remove the SBI_ETRAP error code
2b80b92 lib: sbi: Do not enter OpenSBI with mseccfg.MML == 1
63e09ad lib: sbi: Fix shift bug in sbi_system_reset
ba29293 lib: utils/timer: mtimer: only use regname for aclint
bbd065d lib: sbi: Detect Zicntr extension only based on traps
a2b255b include: Bump-up version to 1.4
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240102151153.133896-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Resolves: #1990
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
It's been a while. This fixes compile warning, typos and
a bug with virtio-serial being used after it was shutdown
at "quiesce".
The full changelog is here:
Alexey Kardashevskiy (2):
Remove ?PICK
version: update to 20230918
Jordan Niethe (1):
virtio-serial: Do not close stdout on quiesce
Kautuk Consul (1):
virtio-serial: Make read and write methods report failure
Thomas Huth (10):
lib/libnet/ipv6: Silence compiler warning from Clang
Fix typos in the board-qemu folder
Fix typos in the lib/libnet folder
Fix typos in the remaining lib folders
Fix typos in the slof folder
Fix typos in the board-js2x folder
Fix typos in the llfw folder
Fix typos in the board-js2x folder
Fix typos in the clients folder
Fix remaining typos in various folders
Compiled with gcc-12.1.0-nolibc
Tested with (sorry, no KVM):
/home/aik/b/q-slof/qemu-system-ppc64 \
-nodefaults \
-chardev stdio,id=STDIO0,signal=off,mux=on \
-device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \
-mon id=MON0,chardev=STDIO0,mode=readline \
-nographic \
-vga none \
-m 2G \
-kernel /home/aik/t/vml4150le \
-initrd /home/aik/t/le.cpio \
-machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \
-bios pc-bios/slof.bin \
-trace events=/home/aik/qemu_trace_events \
-d guest_errors \
-chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \
-mon chardev=SOCKET0,mode=control \
-name 604650,debug-threads=on
[ npiggin: Also tested with KVM, including with virtio-console. ]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
SeaBIOS-hppa version 13 fixes a system reboot crash as reported
in https://gitlab.com/qemu-project/qemu/-/issues/1991
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
SEABIOS_HPPA_VERSION 12 contains those fixes and enhancements:
- Reduce debug level
- Update README file for PA-RISC
- Fix debug name of CPU_HPA_xx if xx >= 10
- Disable device indexing
SEABIOS_HPPA_VERSION 11 contains those fixes and enhancements
(mostly to enable support for 64-bit Linux kernel):
- Fixed 64-bit CPU detection via "mfctl,w" instruction
- Implement PDC_PSW for 64-bit CPUs
- Added PAT PDC functions:
- PDC_PAT_CELL
- PDC_PAT_CHASSIS_LOG
- PDC_PAT_PD_GET_ADDR_MAP
- PDC_PAT_CPU
- Fix return value of PDC_CACHE_RET_SPID space-id bits
- Introduce new default software IDs for the machines
- Fix CPU and FPU model numbers
- Fix 64-bit SMP rendezvous
- Fix Linux 64-bit kernel crash in STI due to usage of unsigned
32-bit "next_font" pointer in sti header files
- Fix graphics output to LASI artist card on PA2.0 machines
- More USB OHCI endianess fixes
- Fixes which make ODE run on B160L
- Fixes which make ODE detect Astro Runway port and CPUs
- Implement "firmware unlocking" via PDC_MODEL/PDC_MODEL_CAPABILITIES call
- Add subfunction 2 for PDC_MODEL_VERSIONS
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Enhancements:
- Initial support for 64-bit CPUs with Astro/Elroy (e.g. C3700
workstation)
- USB support (OHCI)
- better PCI support
- esp-scsi fixes from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Our linker script for optionroms specifies only the placement of the
.text section, leaving the linker free to place the remaining sections
at arbitrary places in the file.
Since at least binutils 2.39, the .note.gnu.build-id section is now
being placed at the start of the file, which causes label addresses to
be shifted. For linuxboot_dma.bin that means that the PnP header
(among others) will not be found when determining the type of ROM at
optionrom_setup():
(0x1c is the label _pnph, where the magic "PnP" is)
$ xxd /usr/share/qemu/linuxboot_dma.bin | grep "PnP"
00000010: 0000 0000 0000 0000 0000 1c00 2450 6e50 ............$PnP
$ xxd pc-bios/optionrom/linuxboot_dma.bin | grep "PnP"
00000010: 0000 0000 0000 0000 0000 4c00 2450 6e50 ............$PnP
^bad
Using a freshly built linuxboot_dma.bin ROM results in a broken boot:
SeaBIOS (version rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org)
Booting from Hard Disk...
Boot failed: could not read the boot disk
Booting from Floppy...
Boot failed: could not read the boot disk
No bootable device.
We're not using the build-id section, so pass the --build-id=none
option to the linker to remove it entirely.
Note: In theory, this same issue could happen with any other
section. The ideal solution would be to have all unused sections
discarded in the linker script. However that would be a larger change,
specially for the pvh rom which uses the .bss and COMMON sections so
I'm addressing only the immediate issue here.
Reported-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230926192502.15986-1-farosas@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
bios.bin is now used only by ISA PC, so PCI drivers are not necessary.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
Block-TLB support and linux-user fixes for hppa target
All 32-bit hppa CPUs allow a fixed number of TLB entries to have a
different page size than the default 4k.
Those are called "Block-TLBs" and are created at startup by the
operating system and managed by the firmware of hppa machines
through the firmware PDC_BLOCK_TLB call.
This patchset adds the necessary glue to SeaBIOS-hppa and
qemu to allow up to 16 BTLB entries in the emulation.
Two patches from Mikulas Patocka fix signal delivery issues
in linux-user on hppa.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZQnz0wAKCRD3ErUQojoP
# X6NDAP9F1Huhceot8peohGodRDOhnXWfDcjQZSDvadieKv/rJQEA60Z5QV5VlQgw
# SyUT4AcoiB7N4nvS+iDa+6dKfRH/YQM=
# =kqqt
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Sep 2023 15:17:39 EDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-btlb-pull-request' of https://github.com/hdeller/qemu-hppa:
linux-user/hppa: lock both words of function descriptor
linux-user/hppa: clear the PSW 'N' bit when delivering signals
target/hppa: Wire up diag instruction to support BTLB
target/hppa: Extract diagnose immediate value
target/hppa: Add BTLB support to hppa TLB functions
target/hppa: Report and clear BTLBs via fw_cfg at startup
target/hppa: Allow up to 16 BTLB entries
target/hppa: Update to SeaBIOS-hppa version 9
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Enhancements:
- Support for Block-TLB (BTLB) on 32-bit CPUs
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If dtc is available, compile the .dts files in the pc-bios directory
instead of using the precompiled binaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Upgrade OpenSBI from v1.3 to v1.3.1 and the pre-built bios images
which fixes the boot failure seen when using QEMU to do a direct
kernel boot with Microchip Icicle Kit board machine.
The v1.3.1 release includes the following commits:
0907de3 lib: sbi: fix comment indent
eb736a5 lib: sbi_pmu: Avoid out of bounds access
7828eeb gpio/desginware: add Synopsys DesignWare APB GPIO support
c6a3573 lib: utils: Fix sbi_hartid_to_scratch() usage in ACLINT drivers
057eb10 lib: utils/gpio: Fix RV32 compile error for designware GPIO driver
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230719165817.889465-1-bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Upgrade OpenSBI from v1.2 to v1.3 and the pre-built bios images.
The v1.3 release includes the following commits:
440fa81 treewide: Replace TRUE/FALSE with true/false
6509127 Makefile: Remove -N ldflag to prevent linker RWX warning
65638f8 lib: utils/sys: Allow custom HTIF base address for RV32
f14595a lib: sbi: Allow platform to influence cold boot HART selection
6957ae0 platform: generic: Allow platform_override to select cold boot HART
cb7e7c3 platform: generic: Allow platform_override to perform firmware init
8020df8 generic/starfive: Add Starfive JH7110 platform implementation
6997552 lib: sbi_hsm: Rename 'priv' argument to 'arg1'
9e397e3 docs: domain_support: Use capital letter for privilege modes
9e0ba09 include: sbi: Fine grain the permissions for M and SU modes
aace1e1 lib: sbi: Use finer permission semantics for address validation
22dbdb3 lib: sbi: Add permissions for the firmware start till end
1ac14f1 lib: sbi: Use finer permission sematics to decide on PMP bits
44f736c lib: sbi: Modify the boot time region flag prints
20646e0 lib: utils: Use SU-{R/W/X} flags for region permissions during parsing
3e2f573 lib: utils: Disallow non-root domains from adding M-mode regions
59a08cd lib: utils: Add M-mode {R/W} flags to the MMIO regions
001106d docs: Update domain's region permissions and requirements
da5594b platform: generic: allwinner: Fix PLIC array bounds
ce2a834 docs: generic.md: fix typo of andes-ae350
8ecbe6d lib: sbi_hsm: handle failure when hart_stop returns SBI_ENOTSUPP
b1818ee include: types: add always inline compiler attribute
9c4eb35 lib: utils: atcsmu: Add Andes System Management Unit support
787296a platform: andes/ae350: Implement hart hotplug using HSM extension
7aaeeab lib: reset/fdt_reset_atcwdt200: Use defined macros and function in atcsmu.h
a990309 lib: utils: Fix reserved memory node for firmware memory
fefa548 firmware: Split RO/RX and RW sections
2f40a99 firmware: Move dynsym and reladyn sections to RX section
c10e3fe firmware: Add RW section offset in scratch
b666760 lib: sbi: Print the RW section offset
230278d lib: sbi: Add separate entries for firmware RX and RW regions
dea0922 platform: renesas/rzfive: Configure Local memory regions as part of root domain
33bf917 lib: utils: Add fdt_add_cpu_idle_states() helper function
c45992c platform: generic: allwinner: Advertise nonretentive suspend
c8ea836 firmware: Fix fw_rw_offset computation in fw_base.S
8050081 firmware: Not to clear all the MIP
84d15f4 lib: sbi_hsm: Use csr_set to restore the MIP
199189b lib: utils: Mark only the largest region as reserved in FDT
66b0e23 lib: sbi: Ensure domidx_to_domain_table is null-terminated
642f3de Makefile: Add missing .dep files for fw_*.elf.ld
09b34d8 include: Add support for byteorder/endianness conversion
680bea0 lib: utils/fdt: Use byteorder conversion functions in libfdt_env.h
b224ddb include: types: Add typedefs for endianness
aa5dafc include: sbi: Fix BSWAPx() macros for big-endian host
e3bf1af include: Add defines for SBI debug console extension
0ee3a86 lib: sbi: Add sbi_nputs() function
4e0572f lib: sbi: Add sbi_ngets() function
eab48c3 lib: sbi: Add sbi_domain_check_addr_range() function
5a41a38 lib: sbi: Implement SBI debug console extension
c43903c lib: sbi: Add console_puts() callback in the console device
29285ae lib: utils/serial: Implement console_puts() for semihosting
65c2190 lib: sbi: Speed-up sbi_printf() and friends using nputs()
321293c lib: utils/fdt: Fix fdt_pmu.c header dependency
aafcc90 platform: generic/allwinner: Fix sun20i-d1.c header dependency
745aaec platform: generic/andes: Fix ae350.c header dependency
99d09b6 include: fdt/fdt_helper: Change fdt_get_address() to return root.next_arg1
6861ee9 lib: utils: fdt_fixup: Fix compile error
4f2be40 docs: fix typo in fw.md
30ea806 lib: sbi_hart: Enable hcontext and scontext
81adc62 lib: sbi: Align SBI vendor extension id with mvendorid CSR
31b82e0 include: sbi: Remove extid parameter from vendor_ext_provider() callback
c100951 platform: generic: renesas: rzfive: Add support to configure the PMA
2491242 platform: generic: renesas: rzfive: Configure the PMA region
67b2a40 lib: sbi: sbi_ecall: Check the range of SBI error
5a75f53 lib: sbi/sbi_domain: cosmetic style fixes
bc06ff6 lib: utils/fdt/fdt_domain: Simplify region access permission check
17b3776 docs: domain_support: Update the DT example
1364d5a lib: sbi_hsm: Factor out invalid state detection
40f16a8 lib: sbi_hsm: Don't try to restore state on failed change
c88e039 lib: sbi_hsm: Ensure errors are consistent with spec
b1ae6ef lib: sbi_hsm: Move misplaced comment
07673fc lib: sbi_hsm: Remove unnecessary include
8a40306 lib: sbi_hsm: Export some functions
73623a0 lib: sbi: Add system suspend skeleton
c9917b6 lib: sbi: Add system_suspend_allowed domain property
7c964e2 lib: sbi: Implement system suspend
37558dc docs: Correct opensbi-domain property name
5ccebf0 platform: generic: Add system suspend test
908be1b gpio/starfive: add gpio driver and support gpio reset
4b28afc make: Add a command line option for debugging OpenSBI
e9d08bd lib: utils/i2c: Add minimal StarFive jh7110 I2C driver
568ea49 platform: starfive: add PMIC power ops in JH7110 visionfive2 board
506144f lib: serial: Cadence: Enable compatibility for cdns,uart-r1p8
1fe8dc9 lib: sbi_pmu: add callback for counter width
51951d9 lib: sbi_pmu: Implement sbi_pmu_counter_fw_read_hi
60c358e lib: sbi_pmu: Reserve space for implementation specific firmware events
548e4b4 lib: sbi_pmu: Rename fw_counter_value
b51ddff lib: sbi_pmu: Update sbi_pmu dev ops
641d2e9 lib: sbi_pmu: Use dedicated event code for platform firmware events
57d3aa3 lib: sbi_pmu: Introduce fw_counter_write_value API
c631a7d lib: sbi_pmu: Add hartid parameter PMU device ops
d56049e lib: sbi: Refactor the calls to sbi_hart_switch_mode()
e8e9ed3 lib: sbi: Set the state of a hart to START_PENDING after the hart is ready
c6a092c lib: sbi: Clear IPIs before init_warm_startup in non-boot harts
ed88a63 lib: sbi_scratch: Optimize the alignment code for alloc size
73ab11d lib: sbi: Fix how to check whether the domain contains fw_region
f64dfcd lib: sbi: Introduce sbi_entry_count() function
30b9e7e lib: sbi_hsm: Fix sbi_hsm_hart_start() for platform with hart hotplug
8e90259 lib: sbi_hart: clear mip csr during hart init
45ba2b2 include: Add defines for SBI CPPC extension
33caae8 lib: sbi: Implement SBI CPPC extension
91767d0 lib: sbi: Print the CPPC device name
edc9914 lib: sbi_pmu: Align the event type offset as per SBI specification
ee016a7 docs: Correct FW_JUMP_FDT_ADDR calculation example
2868f26 lib: utils: fdt_fixup: avoid buffer overrun
66fa925 lib: sbi: Optimize sbi_tlb
24dde46 lib: sbi: Optimize sbi_ipi
80078ab sbi: tlb: Simplify to tlb_process_count/tlb_process function
bf40e07 lib: sbi: Optimize sbi_tlb queue waiting
eeab500 platform: generic: andes/renesas: Add SBI EXT to check for enabling IOCP errata
f692289 firmware: Optimize loading relocation type
e41dbb5 firmware: Change to use positive offset to access relocation entries
bdb3c42 lib: sbi: Do not clear active_events for cycle/instret when stopping
674e019 lib: sbi: Fix counter index calculation for SBI_PMU_CFG_FLAG_SKIP_MATCH
f5dfd99 lib: sbi: Don't check SBI error range for legacy console getchar
7919530 lib: sbi: Add debug print when sbi_pmu_init fails
4e33530 lib: sbi: Remove unnecessary semicolon
6bc02de lib: sbi: Simplify sbi_ipi_process remove goto
dc1c7db lib: sbi: Simplify BITS_PER_LONG definition
f58c140 lib: sbi: Introduce register_extensions extension callback
e307ba7 lib: sbi: Narrow vendor extension range
042f0c3 lib: sbi: pmu: Remove unnecessary probe function
8b952d4 lib: sbi: Only register available extensions
767b5fc lib: sbi: Optimize probe of srst/susp
c3e31cb lib: sbi: Remove 0/1 probe implementations
33f1722 lib: sbi: Document sbi_ecall_extension members
d4c46e0 Makefile: Dereference symlinks on install
8b99a7f lib: sbi: Fix return of sbi_console_init
264d0be lib: utils: Improve fdt_serial_init
9a0bdd0 lib: utils: Improve fdt_ipi
122f226 lib: utils: Improve fdt_timer
df75e09 lib: utils/ipi: buffer overrun aclint_mswi_cold_init
bdde2ec lib: sbi: Align system suspend errors with spec
aad7a37 include: sbi_scratch: Add helper macros to access data type
5cf9a54 platform: Allow platforms to specify heap size
40d36a6 lib: sbi: Introduce simple heap allocator
2a04f70 lib: sbi: Print scratch size and usage at boot time
bbff53f lib: sbi_pmu: Use heap for per-HART PMU state
ef4542d lib: sbi: Use heap for root domain creation
66daafe lib: sbi: Use scratch space to save per-HART domain pointer
fa5ad2e lib: utils/gpio: Use heap in SiFive and StartFive GPIO drivers
903e88c lib: utils/i2c: Use heap in DesignWare and SiFive I2C drivers
5a8cfcd lib: utils/ipi: Use heap in ACLINT MSWI driver
3013716 lib: utils/irqchip: Use heap in PLIC, APLIC and IMSIC drivers
7e5636a lib: utils/timer: Use heap in ACLINT MTIMER driver
3c1c972 lib: utils/fdt: Use heap in FDT domain parsing
acbd8fc lib: utils/ipi: Use scratch space to save per-HART MSWI pointer
f0516be lib: utils/timer: Use scratch space to save per-HART MTIMER pointer
b3594ac lib: utils/irqchip: Use scratch space to save per-HART PLIC pointer
1df52fa lib: utils/irqchip: Don't check hartid in imsic_update_hartid_table()
355796c lib: utils/irqchip: Use scratch space to save per-HART IMSIC pointer
524feec docs: Add OpenSBI logo and use it in the top-level README.md
932be2c README.md: Improve project copyright information
8153b26 platform/lib: Set no-map attribute on all PMP regions
d64942f firmware: Fix find hart index
27c957a lib: reset: Move fdt_reset_init into generic_early_init
8bd666a lib: sbi: check A2 register in ecall_dbcn_handler.
2552799 include: Bump-up version to 1.3
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230630160717.843044-1-bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The startup code of the bios has slightly been changed, apart
from that, there should not be any functional changes this time.
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
start.S currently cannot be compiled with Clang 16 and binutils 2.40:
ld: start.o(.text+0x8): misaligned symbol `__bss_start' (0xc1e5) for
relocation R_390_PC32DBL
According to the built-in linker script of ld, the symbol __bss_start
can actually point *before* the .bss section and does not need to have
any alignment, so in certain situations (like when using the internal
assembler of Clang), the __bss_start symbol can indeed be unaligned
and thus it is not suitable for being used with the "larl" instruction
that needs an address that is at least aligned to halfwords.
The problem went unnoticed so far since binutils <= 2.39 did not
check the alignment, but starting with binutils 2.40, such unaligned
addresses are now refused.
Fix it by loading the address indirectly instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2216662
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Suggested-by: Andreas Krebbel <andreas.krebbel@de.ibm.com>
Message-Id: <20230629104821.194859-8-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The stack array is only referenced from the start-up code (which is
shared between the s390-ccw.img and the s390-netboot.img), but it is
currently declared twice, once in main.c and once in netmain.c.
It makes more sense to declare this in start.S instead - which will
also be helpful in the next patch, since we need to mention the .bss
section in start.S in that patch.
While we're at it, let's also drop the huge alignment of the stack,
since there is no technical requirement for aligning it to page
boundaries.
Message-Id: <20230627074703.99608-4-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Providing the space of a stack frame is the duty of the caller,
so we should reserve 160 bytes before jumping into the main function.
Otherwise the main() function might write past the stack array.
While we're at it, add a proper STACK_SIZE macro for the stack size
instead of using magic numbers (this is also required for the following
patch).
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-3-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
start.S is currently indented with a mixture of spaces and tabs, which
is quite ugly. QEMU coding style says indentation should be 4 spaces,
and this is also what we are using in the assembler files in the
tests/tcg/s390x/ folder already, so let's adjust start.S accordingly.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-2-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Recent versions of ld complain when linking the s390-ccw bios:
/usr/bin/ld: warning: start.o: missing .note.GNU-stack section implies
executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in
a future version of the linker
We can silence the warning by telling the linker to mark the stack
as not executable.
Message-Id: <20230622130822.396793-1-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The types starting with double underscores have likely been
introduced into the s390-ccw bios to be able to re-use structs
from the Linux kernel in the past, but the corresponding structs
in cio.h have been changed there a long time ago already to not
use the variants with the double underscores anymore:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/drivers/s390/cio/cio.h?id=cd6b4f27b9bb2a
So it would be good to replace these in the s390-ccw bios now, too.
Message-Id: <20230627114101.122231-1-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Any good reason why this still exist?
I can understand u* and __u* to be linux kernel like, but ulong?
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230629104821.194859-2-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
https://github.com/hdeller/qemu-hppa into staging
target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Update SeaBIOS-hppa to version 8.
Fixes:
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes & machine run status
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
synonym
The xkb official name for the Arabic keyboard layout is 'ara'.
However xkb has for at least the past 15 years also permitted it to
be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this
synoynm was removed, which breaks compilation of QEMU:
FAILED: pc-bios/keymaps/ar
/home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar
xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths
xkbcommon: ERROR: 1 include paths searched:
xkbcommon: ERROR: /usr/share/X11/xkb
xkbcommon: ERROR: 3 include paths could not be added:
xkbcommon: ERROR: /home/fred/.config/xkb
xkbcommon: ERROR: /home/fred/.xkb
xkbcommon: ERROR: /etc/xkb
xkbcommon: ERROR: Abandoning symbols file "(unnamed)"
xkbcommon: ERROR: Failed to compile xkb_symbols
xkbcommon: ERROR: Failed to compile keymap
The upstream xkeyboard-config change removing the compat
mapping is:
https://gitlab.freedesktop.org/xkeyboard-config/xkeyboard-config/-/commit/470ad2cd8fea84d7210377161d86b31999bb5ea6
Make QEMU always ask for the 'ara' xkb layout, which should work on
both older and newer xkeyboard-config. We leave the QEMU name for
this keyboard layout as 'ar'; it is not the only one where our name
for it deviates from the xkb standard name.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709
|
|
https://github.com/hdeller/qemu-hppa into staging
hppa: New SeaBIOS-hppa version 7 ROM
New SeaBIOS-hppa version 7 ROM to fix Debian-12
CD-ROM boot issues.
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJIExQAKCRD3ErUQojoP
# XypaAP9j0YWdl1ovPiyw8fTdY5U6yCKGIjqtkXzk4egPbzkU1AD7BxMY+GbDSKv8
# Lt9K+R4cu0EVxfYsz17e780wSMLPcwc=
# =M8NU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Jun 2023 09:57:57 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'seabios-hppa-v7-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: New SeaBIOS-hppa version 7
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Update SeaBIOS-hppa to version 7 which fixes a boot problem
with Debian-12 install CD images.
The problem with Debian-12 is, that the ramdisc got bigger
than what the firmware could load in one call to the LSI
scsi driver.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
They are required only for system emulation (i.e. have_system is true).
Signed-off-by: Carlos Santos <casantos@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
In the beginning, the network bootloader was considered experimental and
thus optional, but it is well established nowadays and configure always
checks for roms/SLOF before compiling pc-bios/s390-ccw.
Therefore, it makes sense to always build it together with the other
part of the s390-ccw bios.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the handling of the roms/SLOF submodule out of the main Makefile,
since we are going to remove submodules from the build process of QEMU.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://gitlab.com/kraxel/qemu into staging
update edk2 to 202302 stable tag
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmQYKWwACgkQTLbY7tPo
# cTinlA/9EVWaAyb7UV56My5Zbo41okXev8xmZV8R0G2xAbGaM22v/mPZaifA9Iqn
# JG19Go4xzTmX12Ttg/Def30Bu2RcjHfHccYycUQ7brd40rS8Gc2QYZX4p9NltUda
# dJOMB4e+7MKkavCrqfiHB6LWGMk27cT5puvMkmt65+/WsoBV1gcc0SmFK8tWIM3N
# dZqGdPr9ml72+fv7Cf7crShGEfwV/d3LkJ30Zccq0mbS08QcLm1SbyIB2+SdCyrE
# 35okXRJePACdh7rOWQgWrYAy1CTb54Vup7Fraq0a9NjfknKoQBxWt0w1L95d3p0d
# i8j0Yl1G5rD+Ybqvz/KgDLVNpKddttpkD1CECfZynOioHvwXWODrcJCKF9xsXcRR
# 9Lmeq090ottEbrYXln/clAjwNnF5ALNMEdvmOBZnFBG1H1bxTMI7VwWZEwRBQ5nu
# qtJf11oxuF9Lsi8OzIFcWx0hHkUmIrjCvnyNrVdxoMVPHcXXz1yD8MVV8vgg4jcL
# Fs/s9h62ymv0n3L0OYbgCfXgVWgomcgAkWfHcv+k8sEyzRa2v2wQ9zyVMnjelNkJ
# i/YEn+dupaZ20a6cLoYGQGBOACJ3iHyd1wZ0XzwSYYMq50X/ESRXAo5XofCAhzuz
# 5LQ3VgzQevFOuRwwqjnAwaZHt5M6Ysj0V28iYpMBJDsk+sMP5nM=
# =7oxT
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 20 Mar 2023 09:37:48 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'edk2-stable202302-20230320-pull-request' of https://gitlab.com/kraxel/qemu:
edk2: update firmware binaries
edk2: replace build scripts
edk2: update submodule to edk2-stable202302
acpi: disable tests/data/acpi updates
bios-tables-test: use 128M numa nodes on aarch64
acpi: enable tests/data/acpi updates
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|