aboutsummaryrefslogtreecommitdiff
path: root/pc-bios
AgeCommit message (Collapse)Author
2021-05-04roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci supportBin Meng
When QEMU originally supported the ppce500 machine back in Jan 2014, it was created with a 1:1 mapping of PCI bus address. Things seemed to change rapidly that in Nov 2014 with the following QEMU commits: commit e6b4e5f4795b ("PPC: e500: Move CCSR and MMIO space to upper end of address space") and commit cb3778a0455a ("PPC: e500 pci host: Add support for ATMUs") the PCI memory and IO physical address were moved to beyond 4 GiB, but PCI bus address remained below 4 GiB, hence a non-identity mapping was created. Unfortunately corresponding U-Boot updates were missed along with the QEMU changes and the U-Boot QEMU ppce500 PCI support has been broken since then, until this issue was fixed recently in U-Boot mainline v2021.04 release, specifically by the following U-Boot series: http://patchwork.ozlabs.org/project/uboot/list/?series=230985&state=* The cross-compilation toolchain used to build the U-Boot image is: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/10.1.0/x86_64-gcc-10.1.0-nolibc-powerpc-linux.tar.xz Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-16Update OpenBIOS images to 4a004110 built from submodule.Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-03-10pseries: Update SLOF firmware imageAlexey Kardashevskiy
This is mostly compiler warnings fixed but while doing this, a bug in MIN() in tcgbios was found. Alexey Kardashevskiy (14): helpers: Define MIN() libc: Compile with -Wextra elf: Compile with -Wextra usb: Compile with -Wextra veth: Compile with -Wextra virtio: Compile with -Wextra e1000: Compile with -Wextra libnet: Compile with -Wextra libhv: Compile with -Wextra libnvram: Compile with -Wextra libtpm: Compile with -Wextra slof/prim: Compile with -Wextra Makefile: Actually compile with -Wextra version: update to 20210217 Thomas Huth (1): virtio-serial: Remove superfluous serial-* words Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-04roms/opensbi: Upgrade from v0.8 to v0.9Bin Meng
Upgrade OpenSBI from v0.8 to v0.9 and the pre-built bios images. The v0.9 release includes the following commits: 35bc810 docs/platform: Update QEMU parameter for fw_payload 78afe11 config.mk: Update QEMU run command for generic and sifive fu540 platforms ec3e5b1 docs/platform: sifive_fu540: Update U-Boot instructions 7d61a68 README.md: fix markdown link formatting a5f9104 lib/utils: fdt: Update FDT expand size to 1024 for reserved memory node ec1abf6 include: sbi_bitops: Remove dead shift assignment in ffs/fls 8e47649 lib: Add sbi_strncmp implementation 2845d2d lib: utils: Add a macro in libfdt_env.h for strncmp 2cfd2fc lib: utils: Use strncmp in fdt_parse_hart_id() 937caee lib: sbi_misaligned_ldst: Determine transformed instruction length correctly 4b18a2a firmware: fw_base: Improve exception stack setup in trap handler 9d56961 lib: sbi_trap: Fix hstatus.SPVP update in sbi_trap_redirect() d7f87d9 platform: kendryte/k210: fixup FDT e435ba0 lib: sbi_init: Avoid thundering hurd problem with coldboot_lock 4f3bad6 lib: sbi: Handle the case where MTVAL has illegal instruction address 7b0b289 lib: sbi: Remove redundant SBI_HART_HAS_PMP feature 74d1db7 lib: sbi: Improve PMP CSR detection and progamming 2c341f7 lib: sbi: Detect and print MHPM counters at boot-time 162d453 include: sbi: Few cosmetic changes in riscv_encoding.h ebc8ebc lib: sbi: Improve HPM CSR read/write emulation dcb10c0 lib: sbi: Don't handle VS-mode ecall in sbi_trap_handler() bef63d6 include: Rename ECALL defines to match latest RISC-V spec c1c7c3e lib: sbi_trap: Allow M-mode to M-mode ECALLs 6734304 lib: sbi: Allow specifying start mode to sbi_hsm_hart_start() API 7ccf6bf lib: sbi: Allow specifying mode in sbi_hart_pmp_check_addr() API 9f935a4 lib: utils: Improve fdt_cpu_fixup() implementation 172fa16 lib: sbi: Ensure coldboot HART supports next privilege mode aaeca7e platform: generic: Don't mark non-MMU HARTs as invalid 7701ea1 lib: sbi: Fix PMP CSR detection 79bf80b lib: sbi_scratch: typo scatch a04c465 makefile: fix clean directive af4b50f Makefile: Build ELF, BIN and LD script in platform build directory 6ca0969 firmware: Add common FW_FDT_PATH compile-time option 9c07c51 firmware: Remove FW_PAYLOAD_FDT_PATH compile-time option e9a4bfb Makefile: Allow padding zeros when converting DTB to C source a0f2d4a platform: kendryte/k210: Add some padding for FDT fixups dbeeacb include: sbi: Remove redundant includes from sbi_platform.h a12d46a include: sbi: Remove pmp_region callbacks from sbi_platform_operations a126886 lib: sbi: Configure PMP late in coldboot and warmboot path f81d6f6 lib: sbi: Remove redundant hartid parameter from sbi_hart_init() 8b65005 include: sbi: Make hartmask pointer const in sbi_hartmask_test_hart() b1678af lib: sbi: Add initial domain support e73b92d lib: sbi: Extend sbi_hsm_hart_started_mask() for domains 3a30d2c lib: sbi: Extend sbi_hsm_hart_start() for domains 530e95b lib: sbi: Optimize sbi_hsm_hart_started_mask() implementation 3e20037 lib: sbi: Extend sbi_system_reset() for domains 5edbb7c lib: utils: Update fdt_reserved_memory_fixup() to use current domain 5fd99db lib: utils: Update fdt_cpu_fixup() to use current domain e856462 lib: sbi: Remove redundant sbi_hart_pmp_xyz() functions c10c30b lib: sbi: Configure PMP based on domain memory regions c347408 lib: sbi: Display domain details in boot prints fdf5d5c docs: Add initial documentation for domain support 74c0ea1 lib: utils: Implement "ranges" property parsing bf21632 lib: sbi: Detect PMP granularity and number of address bits a809f40 lib: sbi: Improve boot time print with additional PMP information 914f81f Makefile: Add option to use toolchain default ABI and ISA string 48616b3 lib: sbi: Improve boot prints in cold boot sequence 781cafd docs: fix a typo error 54a7734 include: sbi: Add SBI SRST extension related defines c4acc60 include: sbi: Remove opensbi specific reset type defines da07479 platform: Remove dummy system reset functions 5c429ae lib: sbi: Improve system reset platform operations 548d03e lib: sbi: Implement System Reset (SRST) SBI extension 2677324 firmware: fw_base: Optimize trap handler for RV32 systems 8d2edc4 lib: sbi: Fix sbi_hart_switch_mode() for u-mode 3d921fa lib: sbi: Fix typo in sbi_domain_finalize() 4e37022 lib: sbi: Fix domain_count check in sbi_domain_finalize() c709d40 lib: sbi: Auto start domain only if boot HART within limits c1f6d89 include: sbi: Use lower bits for domain memory region permissions 62ea4f4 lib: sbi: Override domain boot HART when coldboot HART assigned to it 555e737 lib: sbi: Add error prints in sbi_domain_finalize() 9b65dca include: sbi: Add domains_init() platform operation c0d2baa docs: Add domain device tree binding documentation ba741ea lib: utils: Add helper routines to populate domains from FDT 4fffb53 platform: generic: Populate domains from FDT e7da0b4 lib: utils/libfdt: Upgrade to v1.6.0 release 2179777 lib: utils: Allow FDT domain iteration functions to fail 7baccfc lib: sbi: Add function to register new domain 6fc1986 lib: utils: Remove fdt_domain_get() function a029bd9 lib: sbi: Remove domain_get() platform callback function 7dcb1e1 lib: sbi: Fix sign-extension in sbi_misaligned_load_handler() 80bc506 lib: sbi: Replace args with trap registers in ecall handler b7df5e4 lib: sbi: Introduce sbi_trap_exit() API 12394a2 lib: sbi: Allow custom local TLB flush function 0d49c3b lib: utils: Fix shakti uart implementation db56341 lib: sbi: Allow platforms to provide root domain memory regions e884416 include: sbi: No need to pack struct sbi_trap_regs 386eba2 include: sbi: No need to pack struct sbi_scratch 1bbf361 include: sbi: Don't pack struct sbi_platform and sbi_platform_operations da5293f platform: template: Fix compile error 234ed8e include: Bump-up version to 0.9 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: 20210119234438.10132-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-02-09pc-bios: update mirror URLs to GitLabStefan Hajnoczi
qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-6-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-08pc-bios/descriptors: fix paths in json filesSergei Trofimovich
Before the change /usr/share/qemu/firmware/50-edk2-x86_64-secure.json contained the relative path: "filename": "share/qemu/edk2-x86_64-secure-code.fd", "filename": "share/qemu/edk2-i386-vars.fd", After then change the paths are absolute: "filename": "/usr/share/qemu/edk2-x86_64-secure-code.fd", "filename": "/usr/share/qemu/edk2-i386-vars.fd", The regression appeared in qemu-5.2.0 (seems to be related to meson port). CC: Paolo Bonzini <pbonzini@redhat.com> CC: "Marc-André Lureau" <marcandre.lureau@redhat.com> CC: "Philippe Mathieu-Daudé" <philmd@redhat.com> Bug: https://bugs.gentoo.org/766743 Bug: https://bugs.launchpad.net/qemu/+bug/1913012 Signed-off-by: Jannik Glückert <jannik.glueckert@gmail.com> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Message-Id: <20210131143434.2513363-1-slyfox@gentoo.org> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08pc-bios/meson: Only install EDK2 blob firmwares with system emulationPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210122204441.2145197-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23meson.build: Detect bzip2 programPhilippe Mathieu-Daudé
The --enable-bzip2/--disable-bzip2 configure arguments are somehow misleading, they check for the bzip2 library, not the bzip2 program. We need the bzip2 program to install the EDK2 firmware blobs (see commit 623ef637a2e "configure: Check bzip2 is available"). Check if the bzip2 program in the global meson.build to avoid the configuration to succeed, but a later when trying to install the firmware blobs: ../pc-bios/meson.build:5:2: ERROR: Program 'bzip2' not found Reported-by: John Snow <jsnow@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: c8d5450bba3 ("configure: move install_blobs from configure to meson") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210114174509.2944817-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23meson.build: Declare global edk2_targets / install_edk2_blobs variablesPhilippe Mathieu-Daudé
Globally declare in the main meson.build: - the list of EDK2 targets, - whether the EDK2 blobs have to be installed. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210114174509.2944817-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15build: -no-pie is no functional linker flagChristian Ehrhardt
Recent binutils changes dropping unsupported options [1] caused a build issue in regard to the optionroms. ld -m elf_i386 -T /<<PKGBUILDDIR>>/pc-bios/optionrom//flat.lds -no-pie \ -s -o multiboot.img multiboot.o ld.bfd: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?) This isn't really a regression in ld.bfd, filing the bug upstream revealed that this never worked as a ld flag [2] - in fact it seems we were by accident setting --nmagic). Since it never had the wanted effect this usage of LDFLAGS_NOPIE, should be droppable without any effect. This also is the only use-case of LDFLAGS_NOPIE in .mak, therefore we can also remove it from being added there. [1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=983d925d [2]: https://sourceware.org/bugzilla/show_bug.cgi?id=27050#c5 Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Message-Id: <20201214150938.1297512-1-christian.ehrhardt@canonical.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-23pc-bios/s390: Update the s390-ccw bios binariesThomas Huth
Update the binaries with the two reboot fixes from Eric Farman. Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-23pc-bios: s390x: Clear out leftover S390EP stringEric Farman
A Linux binary will have the string "S390EP" at address 0x10008, which is important in getting the guest up off the ground. In the case of a reboot (specifically chreipl going to a new device), we should defer to the PSW at address zero for the new config, which will re-write "S390EP" from the new image. Let's clear it out at this point so that a reipl to, say, a DASD passthrough device drives the IPL path from scratch without disrupting disrupting the order of operations for other boots. Rather than hardcoding the address of this magic (again), let's define it somewhere so that the two users are visibly related. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20201120160117.59366-3-farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-23pc-bios: s390x: Ensure Read IPL memory is cleanEric Farman
If, for example, we boot off a virtio device and chreipl to a vfio-ccw device, the space at lowcore will be non-zero. We build a Read IPL CCW at address zero, but it will have leftover PSW data that will conflict with the Format-0 CCW being generated: 0x0: 00080000 80010000 ------ Ccw0.cda -- Ccw0.chainData -- Reserved bits The data address will be overwritten with the correct value (0x0), but the apparent data chain bit will cause subsequent memory to be used as the target of the data store, which may not be where we expect (0x0). Clear out this space when we boot from DASD, so that we know it exists exactly as we expect. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20201120160117.59366-2-farman@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-20qboot: update to latest upstreamPaolo Bonzini
This also brings in two patches that Debian had to include, qboot_stop_using_inttypes.patch and qboot_no_jump_tables.diff. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20201120152408.164346-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-04pc-bios/s390: update s390-ccw bios binariesCornelia Huck
Contains "s390-bios: Skip writing iplb location to low core for ccw ipl". Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-11-04s390-bios: Skip writing iplb location to low core for ccw iplJason J. Herne
The architecture states that the iplb location is only written to low core for list directed ipl and not for traditional ccw ipl. If we don't skip this then operating systems that load by reading into low core memory may fail to start. We should also not write the iplb pointer for network boot as it might overwrite content that we got via network. Fixes: 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore") Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201030122823.347140-1-borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-26configure: move install_blobs from configure to mesonPaolo Bonzini
Move the conditions under which edk2 blobs are decompressed and installed to pc-bios/meson.build. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-26configure: move directory options from config-host.mak to mesonPaolo Bonzini
Since installation is not part of Makefiles anymore, Make need not know the directories anymore. Meson already knows them through built-in options, do everything using them instead of the config_host dictionary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-13Remove superfluous .gitignore filesThomas Huth
Since we are now always doing out-of-tree builds, these gitignore files should not be necessary anymore. Message-Id: <20200919133637.72744-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390: Update the s390-ccw bios binariesThomas Huth
Make sure that the binaries match the current state of the sources. Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Go into disabled wait when encountering a PGM exceptionJanosch Frank
Let's setup a PGM PSW, so we won't load 0s when a program exception happens. Instead we'll load a disabled wait PSW. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Use reset PSW if avaliableJanosch Frank
If a blob provides a reset PSW then we should use it instead of branching to the PSW address and using our own mask. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com> [thuth: Use Elvis operator to shorten long line] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Save PSW reworkJanosch Frank
We don't need to save the ipl_continue variable in lowcore and have it limited to 32 bits because of the lowcore layout. Let's move it to a new 64 bit variable and get rid of the reset info struct. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Fix bootmap.c zipl component entry data handlingJanosch Frank
The two main types of zipl component entries are execute and load/data. The last member of the component entry struct therefore denotes either a PSW or an address. Let's make this a bit more clear by introducing a union and cleaning up the code that uses that struct member. The execute type component entries written by zipl contain short PSWs, not addresses. Let's mask them and only pass the address part to jump_to_IPL_code(uint64_t address) because it expects an address as visible by the name of the argument. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: break loop if a null block number is reachedMarc Hartmayer
Break the loop if `cur_block_nr` is a null block number because this means that the end of chunk is reached. In this case we will try to boot the default entry. Fixes: ba831b25262a ("s390-ccw: read stage2 boot loader data to find menu") Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Message-Id: <20200924085926.21709-3-mhartmay@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: fix off-by-one errorMarc Hartmayer
This error takes effect when the magic value "zIPL" is located at the end of a block. For example if s2_cur_blk = 0x7fe18000 and the magic value "zIPL" is located at 0x7fe18ffc - 0x7fe18fff. Fixes: ba831b25262a ("s390-ccw: read stage2 boot loader data to find menu") Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Message-Id: <20200924085926.21709-2-mhartmay@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Use "<= ... - 4" instead of "< ... - 3"] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()Thomas Huth
enable_subchannel() is already done during is_dev_possibly_bootable() (which is called from find_boot_device() -> find_subch()), so there is no need to do this again in the main() function. Message-Id: <20200806105349.632-9-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is badThomas Huth
If you try to boot with two virtio-blk disks (without bootindex), and only the second one is bootable, the s390-ccw bios currently stops at the first disk and does not continue booting from the second one. This is annoying - and all other major QEMU firmwares succeed to boot from the second disk in this case, so we should do the same in the s390-ccw bios, too. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200806105349.632-8-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Scan through all devices if no boot device specifiedThomas Huth
If no boot device has been specified (via "bootindex=..."), the s390-ccw bios scans through all devices to find a bootable device. But so far, it stops at the very first block device (including virtio-scsi controllers without attached devices) that it finds, no matter whether it is bootable or not. That leads to some weird situatation where it is e.g. possible to boot via: qemu-system-s390x -hda /path/to/disk.qcow2 but not if there is e.g. a virtio-scsi controller specified before: qemu-system-s390x -device virtio-scsi -hda /path/to/disk.qcow2 While using "bootindex=..." is clearly the preferred way of booting on s390x, we still can make the life for the users at least a little bit easier if we look at all available devices to find a bootable one. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1846975 Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200806105349.632-7-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Do not bail out early if not finding a SCSI diskThomas Huth
In case the user did not specify a boot device, we want to continue looking for other devices if there are no valid SCSI disks on a virtio- scsi controller. As a first step, do not panic in this case and let the control flow carry the error to the upper functions instead. Message-Id: <20200806105349.632-6-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate functionThomas Huth
Move the code to a separate function to be able to re-use it from a different spot later. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200806105349.632-5-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Introduce ENODEV define and remove guards of othersThomas Huth
Remove the "#ifndef E..." guards from the defines here - the header guard S390_CCW_H at the top of the file should avoid double definition, and if the error code is defined in a different file already, we're in trouble anyway, then it's better to see the error at compile time instead of hunting weird behavior during runtime later. Also define ENODEV - we will use this in a later patch. Message-Id: <20200806105349.632-4-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Move ipl-related code from main() into a separate functionThomas Huth
Let's move this part of the code into a separate function to be able to use it from multiple spots later. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20200806105349.632-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-commonThomas Huth
The main QEMU code is compiled with -std=gnu99, -fwrapv and -fno-common. We should use the same flags for the s390-ccw bios, too, to avoid that we get different behavior with different compiler versions that changed their default settings in the course of time (it happened at least with -std=... and -fno-common in the past already). While we're at it, also group the other flags here in a little bit nicer fashion: Move the two "-m" flags out of the "-f" area and specify them on a separate line. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20200806105349.632-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-30meson: fix installation of keymapsAnthony PERARD
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200918130354.1879275-1-anthony.perard@citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-17seabios: add bios-microvm.bin binaryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200915120909.20838-4-kraxel@redhat.com
2020-09-17microvm: name qboot binary qboot.romGerd Hoffmann
qboot isn't a bios and shouldnt be named that way. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200915120909.20838-2-kraxel@redhat.com
2020-09-14roms: Add virtual Boot ROM for NPCM7xx SoCsHavard Skinnemoen
This is a minimalistic boot ROM written specifically for use with QEMU. It supports loading the second-stage loader from SPI flash into RAM, SMP boot, and not much else. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-7-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-13pc-bios: update the README file with edk2-stable202008 informationLaszlo Ersek
Refresh the "pc-bios/README" file with edk2 and OpenSSL release info, matching the edk2-stable202008 firmware images added in the previous patch. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugs.launchpad.net/qemu/+bug/1852196 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <e967b4d5-bcc2-3846-0ad6-9e8f4d2f9115@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-13pc-bios: refresh edk2 build artifacts for edk2-stable202008Laszlo Ersek
Rebuild the pc-bios/edk2-*.fd.bz2 binaries, based on the edk2-stable202008 release. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugs.launchpad.net/qemu/+bug/1852196 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908072939.30178-10-lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-08Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/sirius/ipxe-20200908-pull-request' into staging ipxe: update to aug 2020 snapshot. # gpg: Signature made Tue 08 Sep 2020 07:09:26 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/sirius/ipxe-20200908-pull-request: ipxe: update binaries ipxe: drop ia32 efi roms ipxe: update submodule Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-08ipxe: update binariesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-07Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' ↵Peter Maydell
into staging hppa power button support, graphics updates and firmware fixes # gpg: Signature made Mon 07 Sep 2020 20:09:49 BST # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * remotes/hdeller/tags/target-hppa-pull-request: hw/display/artist: Allow screen size up to 2048 lines hw/display/artist: Refactor x/y coordination extraction hw/display/artist: Verify artist screen resolution target/hppa: Fix boot with old Linux installation CDs hw/hppa: Add power button emulation hw/hppa: Tell SeaBIOS port address of fw_cfg hw/hppa: Change fw_cfg port address hw/hppa: Store boot device in fw_cfg section hw/hppa: Make number of TLB and BTLB entries configurable seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-03meson: fix keymaps without qemu-keymapGerd Hoffmann
In case the qemu-keymap tool generating them is neither installed on the system nor built from sources (due to xkbcommon not being available) qemu will not find the keymaps when started directly from the build tree, This happens because commit ddcf607fa3d6 ("meson: drop keymaps symlink") removed the symlink to the source tree, and the special handling for install doesn't help in case we do not install qemu. Lets fix that by simply copying over the file from the source tree as fallback. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200827102617.14448-1-kraxel@redhat.com> [thuth: Rebased, changed "config_host['qemu_datadir']" to "qemu_datadir", added Gerd's UNLINK fix to configure script] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-01seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tagHelge Deller
Changes: * If only one bootable device is available, boot from it. * Silence PDC warnings with HP-UX 11.11 * Inform Linux about fw_cfg port addresses * Make power switch button configurable from qemu * Clear screen on machine reset * Add fw_cfg option to enable runtime debug info * Fix panic on OpenBSD/6.7 regarding STI console * Set text planes and used_bits in STI fields * Fix mon_tbl entries * Convert sti_region_list to an initialized struct Signed-off-by: Helge Deller <deller@gmx.de>
2020-09-01build: fix recurse-all targetPaolo Bonzini
The missing "/all" suffix prevents the pc-bios/ parts of the build from running. In the meanwhile, -Wall has moved from QEMU_CFLAGS to CFLAGS. Simplify everything by not passing down CFLAGS, and add -Wall in the recursive Makefiles. Reported-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Fixes: 5e6d1573b4 ("remove Makefile.target", 2020-08-21) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-01meson: use meson datadir instead of qemu_datadirMarc-André Lureau
When cross-compiling, by default qemu_datadir is 'c:\Program Files\QEMU', which is not recognized as being an absolute path, and meson will end up adding the prefix again. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-01meson: install pc-bios blobsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200826130622.553318-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-26Merge remote-tracking branch ↵Peter Maydell
'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging artist out of bounds fixes # gpg: Signature made Wed 26 Aug 2020 22:09:55 BST # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * remotes/hdeller/tags/target-hppa-v3-pull-request: hw/display/artist: Fix invalidation of lines near screen border hw/display/artist: Fix invalidation of lines in artist_draw_line() hw/display/artist: Unbreak size mismatch memory accesses hw/display/artist: Prevent out of VRAM buffer accesses Revert "hw/display/artist: Avoid drawing line when nothing to display" hw/display/artist: Refactor artist_rop8() to avoid buffer over-run hw/display/artist: Check offset in draw_line to avoid buffer over-run hw/hppa/lasi: Don't abort on invalid IMR value hw/display/artist.c: fix out of bounds check hw/hppa: Implement proper SeaBIOS version check seabios-hppa: Update to SeaBIOS hppa version 1 hw/hppa: Sync hppa_hardware.h file with SeaBIOS sources Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24microblaze: petalogix-s3adsp1800: Add device-tree sourceEdgar E. Iglesias
Add a device-tree source for petalogix-s3adsp1800 and recompile the DTB. This also removes the unused mpmc node which causes compilation warnings. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 15:31:47 +0000