aboutsummaryrefslogtreecommitdiff
path: root/pc-bios
AgeCommit message (Collapse)Author
2018-05-14pc-bios/s390-ccw: struct tpi_info must be declared as aligned(4)Thomas Huth
I've run into a compilation error today with the current version of GCC 8: In file included from s390-ccw.h:49, from main.c:12: cio.h:128:1: error: alignment 1 of 'struct tpi_info' is less than 4 [-Werror=packed-not-aligned] } __attribute__ ((packed)); ^ cc1: all warnings being treated as errors Since the struct tpi_info contains an element ("struct subchannel_id schid") which is marked as aligned(4), we've got to mark the struct tpi_info as aligned(4), too. CC: qemu-stable@nongnu.org Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525774672-11913-1-git-send-email-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-02pc-bios/s390: Update firmware imagesThomas Huth
s390-ccw.img contains fixes for the boot menu, and s390-netboot.img contains the support for .INS files and the patch for resetting the machine with diag308. Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02s390-ccw: force diag 308 subcode to unsigned longCornelia Huck
We currently pass an integer as the subcode parameter. However, the upper bits of the register containing the subcode need to be 0, which is not guaranteed unless we explicitly specify the subcode to be an unsigned long value. Fixes: d046c51dad3 ("pc-bios/s390-ccw: Get device address via diag 308/6") Cc: qemu-stable@nongnu.org Signed-off-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw/net: Add support for .INS config filesThomas Huth
The .INS config files can normally be found on CD-ROM ISO images, so by supporting these files, it is now possible to boot directly when the TFTP server is set up with the contents of such an CD-ROM image. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OSThomas Huth
The netboot firmware so far simply jumped directly into the OS kernel after the download has been completed. This, however, bears the risk that the virtio-net device still might be active in the background and incoming packets are still placed into the buffers - which could destroy memory of the now-running Linux kernel in case it did not take over the device fast enough. Also the SCLP console is not put into a well-defined state here. We should hand over the system in a clean state when jumping into the kernel, so let's use the same mechanism as it's done in the main s390-ccw firmware and reset the machine with diag308 into a clean state before jumping into the OS kernel code. To be able to share the code with the main s390-ccw firmware, the related functions are now extracted from bootmap.c into a new file called jump2ipl.c. Since we now also set the boot device schid at address 184 for the network boot device, this patch also slightly changes the way how we detect the entry points for non-ELF binary images: The code now looks for the "S390EP" magic first and then jumps to 0x10000 in case it has been found. This is necessary for booting from network devices, since the normal kernel code (where the PSW at ddress 0 points to) tries to do a block load from the boot device. This of course fails for a virtio-net device and causes the kernel to abort with a panic-PSW silently. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw/net: Split up net_load() into init, load and release partsThomas Huth
When we want to support pxelinux-style network booting later, we've got to do several TFTP transfers - and we do not want to apply for a new IP address via DHCP each time. So split up net_load into three parts: 1. net_init(), which initializes virtio-net, gets an IP address via DHCP and prints out the related information. 2. The tftp_load call is now moved directly into the main() function 3. A new net_release() function which should tear down the network stack before we are done in the firmware. This will make it easier to extend the code in the next patches. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw: fix non-sequential boot entries (enum)Collin Walling
zIPL boot menu entries can be non-sequential. Let's account for this issue for the s390 enumerated boot menu. Since we can no longer print a range of available entries to the user, we have to present a list of each available entry. An example of this menu: s390-ccw Enumerated Boot Menu. [0] default [1] [2] [7] [8] [9] [11] [12] Please choose: Signed-off-by: Collin Walling <walling@linux.ibm.com> Reported-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw: fix non-sequential boot entries (eckd)Collin Walling
zIPL boot menu entries can be non-sequential. Let's account for this issue for the s390 zIPL boot menu. Since this boot menu is actually an imitation and is not completely capable of everything the real zIPL menu can do, let's also print a different banner to the user. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reported-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw: fix loadparm initialization and int conversionCollin Walling
Rename the loadparm char array in main.c to loadparm_str and increased the size by one byte to account for a null termination when converting the loadparm string to an int via atoui. We also allow the boot menu to be enabled when loadparm is set to an empty string or a series of spaces. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reported-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIESCollin Walling
The MAX_TABLE_ENTRIES constant has a name that is too generic. As we want to declare a limit for boot menu entries, let's rename it to a more fitting MAX_BOOT_ENTRIES and set its value to 31 (30 boot entries and 1 default entry). Also we move it from bootmap.h to s390-ccw.h to make it available for menu.c in a later patch. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02pc-bios/s390-ccw: size_t should be unsignedThomas Huth
"size_t" should be an unsigned type according to the C standard. Thus we should also use this convention in the s390-ccw firmware to avoid confusion. I checked the sources, and apart from one spot in libc.c, the code should all be fine with this change. Buglink: https://bugs.launchpad.net/qemu/+bug/1753437 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-04-09pc-bios/s390: update imagesCornelia Huck
Contains the following commits: - s390: Do not pass inofficial IPL type to the guest For s390-netboot.img, this also contains the following commits (update was forgotten last time): - pc-bios/s390-ccw: Move string arrays from bootmap header to .c file - pc-bios/s390-ccw: Increase virtio timeout to 30 seconds Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-09s390: Do not pass inofficial IPL type to the guestViktor Mihajlovski
IPL over a virtio-scsi device requires special handling not available in the real architecture. For this purpose the IPL type 0xFF has been chosen as means of communication between QEMU and the pc-bios. However, a guest OS could be confused by seeing an unknown IPL type. This change sets the IPL parameter type to 0x02 (CCW) to prevent this. Pre-existing Linux has looked up the IPL parameters only in the case of FCP IPL. This means that the behavior should stay the same even if Linux checks for the IPL type unconditionally. Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Message-Id: <1522940844-12336-4-git-send-email-mihajlov@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-06Update seabios-hppaRichard Henderson
A dozen or so fixes from Helge upstream.
2018-04-03pc-bios/s390-ccw: update imageCornelia Huck
Contains the following commits: - pc-bios/s390-ccw: Move string arrays from bootmap header to .c file - pc-bios/s390-ccw: Increase virtio timeout to 30 seconds Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-03pc-bios/s390-ccw: Increase virtio timeout to 30 secondsThomas Huth
The current timeout is set to only three seconds - and considering that vring_wait_reply() or rather get_second() is not doing any rounding, the real timeout is likely rather 2 seconds in most cases. When the host is really badly loaded, it's possible that we hit this timeout by mistake; it's even more likely if we run the guest in TCG mode instead of KVM. So let's increase the timeout to 30 seconds instead to ease this situation (30 seconds is also the timeout that is used by the Linux SCSI subsystem for example, so this seems to be a sane value for block IO timeout). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1549079 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1522316251-16399-1-git-send-email-thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> [CH: tweaked commit message] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-19update seabios to 1.11.1Gerd Hoffmann
git shortlog rel-1.11.0..rel-1.11.1 =================================== Kevin O'Connor (3): build: Use git describe --always shadow: Don't invoke a shutdown on reboot unless in a reboot loop paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified Marcel Apfelbaum (1): pci: fix 'io hints' capability for RedHat PCI bridges Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-03-13acpi: remove unused acpi-dsdt.amlIgor Mammedov
SeaBIOS blob which is currently shipped with QEMU doesn't need acpi-dsdt.aml nor is able to use it and code that loaded it in QEMU was removed by (commit 9fb7aaaf4c "pc: drop external DSDT loading") in 2013. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-08pc-bios/s390-ccw: Move string arrays from bootmap header to .c fileThomas Huth
bootmap.h can currently only be included once - otherwise the linker complains about multiple definitions of the "magic" strings. It's a bad style to define string arrays in header files, so let's better move these to the bootmap.c file instead where they are used. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1520317081-5341-1-git-send-email-thuth@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-03-06ppc: Add aCube Sam460ex boardBALATON Zoltan
Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. This is not a complete implementation yet with a lot of components still missing but enough for the U-Boot firmware to start and to boot a Linux kernel or AROS. Signed-off-by: François Revol <revol@free.fr> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06pc-bios: Added u-boot-sam460 firmware binaryBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-26pc-bios/s390: Rebuild the s390x firmware images with the boot menu changesThomas Huth
Provide a new s390-ccw.img binary with the boot menu patches by Collin. Though there should not be any visible changes for the network booting, the s390-netboot.img binary has been rebuilt, too, since some of the changes affected the shared source files. Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: interactive boot menu for scsiCollin L. Walling
Interactive boot menu for scsi. This follows a similar procedure as the interactive menu for eckd dasd. An example follows: s390x Enumerated Boot Menu. 3 entries detected. Select from index 0 to 2. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Added additional "break;" statement to avoid analyzer warnings] Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: use zipl values when no boot menu options are presentCollin L. Walling
If no boot menu options are present, then flag the boot menu to use the zipl options that were set in the zipl configuration file (and stored on disk by zipl). These options are found at some offset prior to the start of the zipl boot menu banner. The zipl timeout value is limited to a 16-bit unsigned integer and stored as seconds, so we take care to convert it to milliseconds in order to conform to the rest of the boot menu functionality. This is limited to CCW devices. For reference, the zipl configuration file uses the following fields in the menu section: prompt=1 enable the boot menu timeout=X set the timeout to X seconds To explicitly disregard any boot menu options, then menu=off or <bootmenu enable='no' ... /> must be specified. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: set cp_receive mask only when needed and consume pending service irqsCollin L. Walling
It is possible while waiting for multiple types of external interrupts that we might have pending irqs remaining between irq consumption and irq-type disabling. Those interrupts could potentially propagate to the guest after IPL completes and cause unwanted behavior. As it is today, the SCLP will only recognize write events that are enabled by the control program's send and receive masks. To limit the window for, and prevent further irqs from, ASCII console events (specifically keystrokes), we should only enable the control program's receive mask when we need it. While we're at it, remove assignment of the (non control program) send and receive masks, as those are actually set by the SCLP. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: read user input for boot index via the SCLP consoleCollin L. Walling
Implements an sclp_read function to capture input from the console and a wrapper function that handles parsing certain characters and adding input to a buffer. The input is checked for any erroneous values and is handled appropriately. A prompt will persist until input is entered or the timeout expires (if one was set). Example: Please choose (default will boot in 10 seconds): Correct input will boot the respective boot index. If the user's input is empty, 0, or if the timeout expires, then the default zipl entry will be chosen. If the input is within the range of available boot entries, then the selection will be booted. Any erroneous input will cancel the timeout and re-prompt the user. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: print zipl boot menuCollin L. Walling
When the boot menu options are present and the guest's disk has been configured by the zipl tool, then the user will be presented with an interactive boot menu with labeled entries. An example of what the menu might look like: zIPL v1.37.1-build-20170714 interactive boot menu. 0. default (linux-4.13.0) 1. linux-4.13.0 2. performance 3. kvm Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: read stage2 boot loader data to find menuCollin L. Walling
Read the stage2 boot loader data block-by-block. We scan the current block for the string "zIPL" to detect the start of the boot menu banner. We then load the adjacent blocks (previous block and next block) to account for the possibility of menu data spanning multiple blocks. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: set up interactive boot menu parametersCollin L. Walling
Reads boot menu flag and timeout values from the iplb and sets the respective fields for the menu. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: parse and set boot menu optionsCollin L. Walling
Set boot menu options for an s390 guest and store them in the iplb. These options are set via the QEMU command line option: -boot menu=on|off[,splash-time=X] or via the libvirt domain xml: <os> <bootmenu enable='yes|no' timeout='X'/> </os> Where X represents some positive integer representing milliseconds. Any value set for loadparm will override all boot menu options. If loadparm=PROMPT, then the menu will be enabled without a timeout. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: move auxiliary IPL data to separate locationCollin L. Walling
The s390-ccw firmware needs some information in support of the boot process which is not available on the native machine. Examples are the netboot firmware load address and now the boot menu parameters. While storing that data in unused fields of the IPL parameter block works, that approach could create problems if the parameter block definition should change in the future. Because then a guest could overwrite these fields using the set IPLB diagnose. In fact the data in question is of more global nature and not really tied to an IPL device, so separating it is rather logical. This commit introduces a new structure to hold firmware relevant IPL parameters set by QEMU. The data is stored at location 204 (dec) and can contain up to 7 32-bit words. This area is available to programming in the z/Architecture Principles of Operation and can thus safely be used by the firmware until the IPL has completed. Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> [thuth: fixed "4 + 8 * n" comment] Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: update libcCollin L. Walling
Moved: memcmp from bootmap.h to libc.h (renamed from _memcmp) strlen from sclp.c to libc.h (renamed from _strlen) Added C standard functions: isdigit Added non C-standard function: uitoa atoui Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: refactor IPL structsCollin L. Walling
ECKD DASDs have different IPL structures for CDL and LDL formats. The current Ipl1 and Ipl2 structs follow the CDL format, so we prepend "EckdCdl" to them. Boot info for LDL has been moved to a new struct: EckdLdlIpl1. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: refactor eckd_block_num to use CHSCollin L. Walling
Add new cylinder/head/sector struct. Use it to calculate eckd block numbers instead of a BootMapPointer (which used eckd chs anyway). Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26s390-ccw: refactor boot map table codeCollin L. Walling
Some ECKD bootmap code was using structs designed for SCSI. Even though this works, it confuses readability. Add a new BootMapTable struct to assist with readability in bootmap entry code. Also: - replace ScsiMbr in ECKD code with appropriate structs - fix read_block messages to reflect BootMapTable - fixup ipl_scsi to use BootMapTable (referred to as Program Table) - defined value for maximum table entries Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-22Update OpenBIOS images to 54d959d9 built from submodule.Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-02-04roms/seabios-hppa: Update submodule and imageRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31pc-bios: Add hppa-firmware.img and git submoduleRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-26Update OpenBIOS images to b5c93acd14 built from submodule.Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-01-17ppc/pnv: Update skiboot firmware imageCédric Le Goater
This is skiboot 5.9 (commit e0ee24c2). It brings improved POWER9 support among many other things. Built from submodule. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10pseries: Update SLOF firmware image to qemu-slof-20171214Alexey Kardashevskiy
The main changes are: - able to handle more devices with specified bootindex; - implements flatten device tree rendering, for both QEMU and guest kernel. The full list is: > boot: use a temporary bootdev-buf > boot: do not concatenate bootdev > libvirtio: Mark struct virtio_scsi_req_cmd as packed > fdt: Implement "fdt-fetch" method for client interface > rtas: Store RTAS address and entry in the device tree > board-qemu: Fix slof-build-id length > fdt: Pass the resulting device tree to QEMU > fdt: Fix version and add a word for FDT header size > tree: Rework set-chosen-cpu and store /chosen ihandle and phandle > node: Add some documentation > Revert various SLOF-to-QEMU private hypercalls > Use input-device and output-device > netboot: Create bootp-response when bootp is used > libnet/ipv6: assign times_asked value directly > usb-xhci: Reset ERSTSZ together with ERSTBA > virtio-net: rework the driver to support multiple open > board-qemu: add private hcall to inform host on "phandle" update Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-14pc-bios/s390-ccw.img: update imageCornelia Huck
Contains the following commit: - pc-bios/s390-ccw: zero out bss section Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-12-14pc-bios/s390-ccw: zero out bss sectionChristian Borntraeger
The QEMU ELF loader does not zero the bss segment. This resulted in several bugs, e.g. see commit 5d739a4787a5 (s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css) commit 6a40fa2669d3 (s390-ccw.img: Initialize next_idx) commit 8775d91a0f42 (pc-bios/s390-ccw: Fix problem with invalid virtio-scsi LUN when rebooting) Let's fix this once and forever by letting the BIOS zero the bss itself. Suggested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20171122142627.73170-3-borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-11-21Use qemu.org domain nameStefan Hajnoczi
The owner of qemu.org has delegated authority to modify DNS records to the QEMU Project. This has allowed us to use the domain name without worries about IP address changes or technical issues disrupting service. The issues described in commit 859389810910f232188675d2f10b15f1aad77660 ("Use qemu-project.org domain name") have therefore been mitigated. This patch switches back to consistently using qemu.org instead of qemu-project.org in documentation, version.rc, and the Windows installer script. The git submodules and SeaBIOS still use qemu-project.org for the time being. This will be fixed in the QEMU 2.12 release cycle. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20171121120435.28728-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-20pc-bios/s390-ccw.img: update imageCornelia Huck
Contains the following commit: - pc-bios/s390-ccw: Fix problem with invalid virtio-scsi LUN when rebooting Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-11-20pc-bios/s390-ccw: Fix problem with invalid virtio-scsi LUN when rebootingThomas Huth
When rebooting a guest that has a virtio-scsi disk, the s390-ccw bios sometimes bails out with an error message like this: ! SCSI cannot report LUNs: STATUS=02 RSPN=70 KEY=05 CODE=25 QLFR=00, sure ! Enabling the scsi_req* tracing in QEMU shows that the ccw bios is trying to execute the REPORT LUNS SCSI command with a LUN != 0, and this causes the SCSI command to fail. Looks like we neither clear the BSS of the s390-ccw bios during reboot, nor do we explicitly set the default_scsi_device.lun value to 0, so this variable can contain random values from the OS after the reboot. By setting this variable explicitly to 0, the problem is fixed and the reboots always succeed. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1514352 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1510942228-22822-1-git-send-email-thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-11-14seabios: update to 1.11 finalGerd Hoffmann
Update our pre-release seabios snapshot to the final release. git shortlog ============ Gerd Hoffmann (1): sercon: Disable ScreenAndDebug in case both serial console and serial debug are active Kevin O'Connor (2): timer: Avoid integer overflows in usec and nsec calculations docs: Note v1.11.0 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-30s390-*.img: update s390 bios with latest fixesChristian Borntraeger
includes 7618c0aefed1 ("s390-ccw: print carriage return with new lines") a8fbbf1db7a3 ("s390: set DHCP client architecure id for netboot") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-10-30s390-ccw: print carriage return with new linesCollin L. Walling
The sclp console in the s390 bios writes raw data, leading console emulators (such as virsh console) to treat a new line ('\n') as just a new line instead of as a Unix line feed. Because of this, output appears in a "stair case" pattern. Let's print \r\n on every occurrence of a new line in the string passed to write to amend this issue. This is in sync with the guest Linux code in drivers/s390/char/sclp_vt220.c which also does a line feed conversion in the console part of the driver. This fixes the s390-ccw and s390-netboot output like $ virsh start test --console Domain test started Connected to domain test Escape character is ^] Network boot starting... Using MAC address: 02:01:02:03:04:05 Requesting information via DHCP: 010 Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Message-Id: <1509120893-28054-1-git-send-email-walling@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 08:45:16 +0000