| Age | Commit message (Collapse) | Author |
|---|
|
Adds two new vgabios binaries, for ramfb and bochs-display.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
git shortlog rel-1.11.0..rel-1.11.1
===================================
Kevin O'Connor (3):
build: Use git describe --always
shadow: Don't invoke a shutdown on reboot unless in a reboot loop
paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
Marcel Apfelbaum (1):
pci: fix 'io hints' capability for RedHat PCI bridges
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Update our pre-release seabios snapshot to the final release.
git shortlog
============
Gerd Hoffmann (1):
sercon: Disable ScreenAndDebug in case both serial console and serial debug are active
Kevin O'Connor (2):
timer: Avoid integer overflows in usec and nsec calculations
docs: Note v1.11.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This is the seabios update for qemu 2.11. Well, almost, seabios is in
freeze for the upcoming 1.11 release. This updates seabios to current
git master snapshot, and it will be updated again to 1.11 final before
the 2.11 release.
With this two-step seabios gets some more wide testing before the actual
release and the update to 1.11 final (which will most likely happen
after qemu freeze) should have bugfix patches only.
git shortlog
============
Aleksandr Bezzubikov (3):
pci: refactor pci_find_capapibilty to get bdf as the first argument instead of the whole pci_device
pci: add QEMU-specific PCI capability structure
pci: enable RedHat PCI bridges to reserve additional resources on PCI init
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Daniel Verkamp (5):
nvme: support NVMe 1.0 controllers
nvme: extend command timeout to 5 seconds
nvme: fix reversed loop condition in cmd_readwrite
nvme: fix extraction of status code bits
nvme: fix copy-paste mistake in comment
Filippo Sironi (1):
nvme: Use the Maximum Queue Entries Supported (MQES) to initialize I/O queues
Gerd Hoffmann (7):
usb: add hub portmap
usb-xhci: use hub portmap
std: add cp437 to unicode map
kbd: make enqueue_key public, add ascii_to_keycode
romfile: add support for constant files.
paravirt: serial console configuration.
add serial console support
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Jason Wang (1):
virtio: IOMMU support
Julian Stecklina (2):
block: add NVMe boot support
nvme: fix out of memory behavior
Julius Werner (1):
coreboot: Adapt to upstream CBMEM console changes
Kevin O'Connor (26):
usb: Make usb_time_sigatt variable static
tpm: Add comment banners to tcg.c separating major parts of spec
tpm: Don't call tpm_set_failure() from tpm12_get_capability()
tpm: Move code around in tcgbios.c to keep like code together
acpi: Generalize find_fadt() and find_tcpa_by_rsdp() into find_acpi_table()
tpm: Don't call tpm_build_and_send_cmd() from tpm20_stirrandom()
tpm: Rework tpm_build_and_send_cmd() into tpm_simple_cmd()
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
docs: Note release dates for 1.10.1 and 1.10.2
resume: Don't attempt to use generic reboot mechanisms on QEMU
boot: Increase description size in boot menu
src: Minor - remove tab characters that slipped into SeaBIOS C code
NVMe: Allow NVMe to be enabled on real hardware
smm: Backup and restore A20 on an SMI based mode switch
stacks: Make sure to initialize Call16Data
stacks: Don't update the A20 settings if they haven't changed
stacks: There is no need to disable NMI if it is already disabled
vga: Fix bug in stdvga_get_linesize()
docs: Fix typos in Memory_Model.md
tcgbios: Fix use of unitialized variable
boot: Rename drive_g to drive
disk: Don't require the 'struct drive_s' to be in the f-segment
block: Rename disk_op_s->drive_gf to drive_fl
virtio: Allocate drive_s storage in low memory
xhci: Build TRBs directly in xhci_trb_queue()
xhci: Verify the device is still present in xhci_cmd_submit()
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Patrick Rudolph (4):
SeaVGABios/cbvga: Advertise correct pixel format
SeaVGABIOS/vbe: Query driver for scanline pitch v2
SeaVGABios/cbvga: Use active mode to clear screen
SeaVGABios/cbvga: Advertise compatible VESA modes
Paul Menzel (1):
vgasrc: Increase debug level
Petr Berky (1):
config: Add function to check if fw_cfg exists
Ricardo Ribalda Delgado (1):
serialio: Support for mmap serial ports
Roman Kagan (11):
blockcmd: accept only disks and CD-ROMs
blockcmd: generic SCSI luns enumeration
virtio-scsi: enumerate luns with REPORT LUNS
esp-scsi: enumerate luns with REPORT LUNS
usb-uas: enumerate luns with REPORT LUNS
pvscsi: fix the comment about lun enumeration
mpt-scsi: try to enumerate luns with REPORT LUNS
lsi-scsi: reset in case of a serious problem
lsi-scsi: try to enumerate luns with REPORT LUNS
blockcmd: start REPORT_LUNS with the smallest buffer
Revert "lsi-scsi: reset in case of a serious problem"
Stefan Berger (1):
tpm: Log TPM 2 digest structure in little endian format
Youness Alaoui (1):
nvme: Enable NVMe support for non-qemu hardware
Zeh, Werner (1):
ahci: Disable Native Command Queueing
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
git shortlog rel-1.10.1..rel-1.10.2
===================================
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Kevin O'Connor (1):
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Paul Menzel (1):
vgasrc: Increase debug level
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
git shortlog rel-1.10.0..rel-1.10.1
===================================
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
New in this release:
===================
* Initial support for Trusted Platform Module (TPM) version 2.0
* Several USB XHCI timing fixes on real hardware
* Support for "LSI MPT Fusion" scsi controllers on QEMU
* Support for virtio devices mapped above 4GB
* Several bug fixes and code cleanups
git shortlog rel-1.9.3..rel-1.10.0
==================================
Alex Williamson (1):
fw/pci: Add support for mapping Intel IGD via QEMU
Cao jin (1):
Fix comment typo
Cole Robinson (1):
biostables: Support SMBIOS 2.6+ UUID format
Dana Rubin (2):
pvscsi: Fix incorrect arguments order in call to memalign_low
pvscsi: Use high memory for rings
Don Slutz (1):
Support for booting from LSI Logic LSI53C1030, SAS1068, SAS1068e
Gerd Hoffmann (4):
ahci: set transfer mode according to the capabilities of connected drive
virtio: uninline _vp_{read,write}
virtio: pci cfg access
virtio: fix virtio-pci
Haozhong Zhang (1):
fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL
Igor Mammedov (3):
paravirt: disable legacy bios tables in case of more than 255 CPUs
add helpers to read etc/boot-cpus at resume time
support booting with more than 255 CPUs
Kevin O'Connor (124):
usb: Allow configuration of sigatt time (in etc/usb-time-sigatt)
xhci: Check for device disconnects during USB2 reset polling
sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
sdcard: fix typo causing 32bit write to 16bit block_size field
sdcard: Enable extra debugging on sdcard_waitw() timeout
acpi_extract: Move main code to new function main()
acpi_extract: Make the generated .hex files more human readable
acpi_extract: Don't generate unused (and empty) q35-acpi-dsdt.hex file
acpi: Don't build SSDT files on every build; store them in git
acpi: Remove build check for iasl
tpm: Move standard definitions from tcgbios.h to new file std/tcg.h
util.h: Minor - HaveRunPost is in misc.c not resume.c
tpm: Add "static" declaration to functions not used outside tcgbios.c
tpm: Move code around in tcgbios.c
tpm: Move error recovery from tpm_extend_acpi_log() to only caller
tpm: Open code tpm_ipl() into callers
tpm: Change tpm_add_measurement() to tpm_add_action()
tpm: Move tpm_add_bootdevice() into callers
tpm: Move tpm_start_option_rom_scan() and tpm_calling_int19h() into callers
tpm: pcpes->event is a variable length array
tpm: Don't pass entry_count around in parameters to/from tpm_extend_acpi_log()
tpm: There is no need to pass pcrindex to hash_log_extend_event()
tpm: Perform hashing separately from logging
tpm: There is no need to pass event_length to hash/extend functions
tpm: Avoid scatter-gather copying in build_and_send_cmd()
tpm: Don't implement scatter-gather in transmit()
tpm: Merge tpm_log_event() and tpm_extend_acpi_log()
tpm: Merge tpm_log_extend_event() and tpm_extend(); extend before logging
xhci: Wait for port enable even for USB3 devices
xhci: Improve port status change debugging
xhci: Disable slot on failed set_address command
nmi: Don't try to switch onto extra stack in NMI handler
scsi: Do not call printf() from scsi_is_ready()
block: Report drive->sectors using "%u" instead of "%d"
tpm: Add banner separating the TCG bios interface code from TCG menu code
tpm: Avoid macro expansion of tpm request / response structs
tpm: Simplify hardware probe and detection checks
tpm: Add wrapper function tpmhw_set_timeouts()
tpm: Move TPM hardware functions from tcgbios.c to hw/tpm_drivers.c
tpm: Rework TPM interface shutdown support
tpm: Simplify tcpa probe
tpm: Introduce tpm_get_capability() helper function
tpm: Eliminate response buffer parameter from build_and_send_cmd()
tpm: Don't return a status from external bios measurement functions
tpm: No need to check the return status of measurements
tpm: Don't call tpm_set_failure() from tpm_log_extend_event()
tpm: Don't use 16bit BIOS return codes in build_and_send_cmd()
tpm: Don't use 16bit BIOS return codes in tpm_log_event()
tpm: Don't use 16bit BIOS return codes in tpmhw_* functions
tpm: Don't use 16bit BIOS return codes in TPM menu functions
usb: Remove usbdev->slotid field
coreboot: Check for unaligned cbfs header
resume: Make KVM soft reboot loop detection more flexible
post: Always set HaveRunPost prior to setting any other global variable
kbd: Don't treat scancode and asciicode as separate values
kbd: Refactor capslock and numlock handling
ehci: Only delay UHCI/OHCI port scan until after EHCI setup completes
usb: Eliminate USB controller setup thread
pci: Add helper functions for internal driver BAR handling
ahci: Convert to new PCI BAR helper functions
ata: Convert to new PCI BAR helper functions
esp-scsi: Convert to new PCI BAR helper functions
lsi-scsi: Convert to new PCI BAR helper functions
megasas: Convert to new PCI BAR helper functions
pvscsi: Convert to new PCI BAR helper functions
sdcard: Convert to new PCI BAR helper functions
ehci: Convert to new PCI BAR helper functions
ohci: Convert to new PCI BAR helper functions
uhci: Convert to new PCI BAR helper functions
xhci: Convert to new PCI BAR helper functions
virtio: Convert to new PCI BAR helper functions
pci: Consistently set pci->have_drivers for devices with internal drivers
pci: Implement '%pP' printf handler for 'struct pci_device' pointers
pci: Move code in pci.c that is specific to pciinit.c to pciinit.c
pci: Split low-level pci code from higher-level 'struct pci_device' code
scsi: Always use MAXDESCSIZE when building drive description
block: Move drive setup to new function block_setup()
tpm: Unify tpm_fill_hash()/tpm_log_extend_event() and use in BIOS interface
docs: Note release date of 1.9.1
build: fix .text section address alignment
tpm: Write logs in TPM 2 format
mpt-scsi: Declare 'int i' outside of for loop for older compilers
block: Move send_disk_op() from block.c to disk.c
disk: Avoid stack_hop() path if already on the extra stack
optionroms: Drop support for CONFIG_OPTIONROMS_DEPLOYED
shadow: Batch PCI config writes
virtio: Use threads when scanning for virtio devices
scsi: Launch a thread when scanning for drives in the scsi drivers
docs: Note release date of 1.9.2
usb-xhci: Remove unused const variables
tcgbios: Remove unused const variable
vgabios: Remove special case of dh==0xff in handle_1013()
vgabios: Don't check for special case of page==0xff on external calls
vgabios: Simplify set_cursor_pos()
docs: Note release date of 1.9.3
vgabios: Simplify scroll logic
blockcmd: CMD_SCSI op is only used in 32bit mode
swcursor: Move swcursor code from vgafb.c to new file swcursor.c
swcursor: Concentrate swcursor logic in swcursor.c
vgafb: Move header definitions from vgabios.h to new file vgafb.h
vgainit: Move video param setup to stdvga_build_video_param()
vgautil: Add new header file with misc function and variable definitions
vgautil: Move generic definitions from stdvga.h to vgautil.h
vgautil: Move definitions from cbvga.h and clext.h to vgautil.h
version: Update header files now that version.c is not auto generated
checkstack: Handle conditional checks at start of functions
tpm: Append to TPM2 log the hashes used for PCR extension
ps2: Remove stale check for timeout warning on reset
pic: The default hardware interrupt handlers should not take a parameter
kbd: Implement 101-key keyboard keycode mapping
kbd: Implement extended keycode mappings for keypad-enter and keypad-/
kbd: Suppress keys without mappings
kbd: Merge bda->kbd_flag0 and bda->kbd_flag1
kbd: Extract out shift flag setting into new function
kbd: Move checking for special keys in __process_keys() into switch
kbd: Ignore fake shift keys
usb-hid: Generate Ctrl+Break and Alt+SysReq keys
kbd: Generate interrupt events for SysReq, PrtScr, and Break
post: Map int 0x05 to entry point
kbd: Move extended and release events out of special key detection switch
build: Be sure to also include out/*.d in Makefile
smp: consolidate CPU APIC ID detection and accounting
build: Add -fno-pie to the gcc flags when available
docs: Note v1.10.0 release
Marcel Apfelbaum (2):
fw/pci: do not automatically allocate IO region for PCIe bridges
fw/pci: add Q35 S3 support
Matt DeVillier (1):
sdcard: skip detection of PCI sdhci controllers if etc/sdcard used
Paolo Bonzini (1):
smp: restore MSRs on S3 resume
Piotr Król (1):
docs: fix various typos and inconsistency
Roger Pau Monne (1):
build: fix typo in buildversion.py
Stefan Berger (34):
tpm: Temporarily deactivate the TPM in case of failure
tpm: Refactor function building TPM commands
tpm: Refactor the parameters being passed to tpm_extend_acpi_log
tpm: Refactor hash_log_event BIOS interface function
tpm: Refactor hash_log_extend_event
tpm: fix compiler warning with older gcc versions
tpm: Drop code using the TPM for sha1
tpm: Set timeouts and durations to microsecond values
tpm: Cache all log related pointers in tpm_state
tpm: Refactor pass_through_to_tpm
tpm: Rename remaining interrupt functions
tpm: Remove check for working TPM from TPM interrupt handler
tpm: Check length parameter of the array
tpm: Add a menu for TPM configuration
tpm: Copy digest into HashLogExentEvent response
tpm: Move assert_physical_presence and dependencies
tpm: Add support for harware physical presence
tpm: Rework the assertion of physical presence
tpm: Remove usage of PP_CMD_ENABLE from all but one place
tpm: Do not set TPM in failure mode if menu command fails
tpm: Extend TPM TIS with TPM 2 support.
tpm: Factor out tpm_extend
tpm: Prepare code for TPM 2 functions
tpm: Implement tpm20_startup and tpm20_s3_resume
tpm: Implement tpm20_set_timeouts
tpm: Implement tpm20_prepboot
tpm: Implement tpm20_extend
tpm: Implement tpm20_menu
tpm: Implement TPM 2's tpm_set_failure part
tpm: Filter TPM commands in passthrough API
tpm: Retrieve the PCR Bank configuration
tpm: Restructure tpm20_extend to use buffer and take hash as parameter
tpm: Refactor tpml_digest_values_sha1 structure
tpm: Extend tpm20_extend to support extending to multiple PCR banks
Zheng Bao (1):
splash: Skip the RGB555 mode
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
git shortlog rel-1.9.0..rel-1.9.1
=================================
Cole Robinson (1):
biostables: Support SMBIOS 2.6+ UUID format
Kevin O'Connor (7):
xhci: Check for device disconnects during USB2 reset polling
xhci: Wait for port enable even for USB3 devices
sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
sdcard: fix typo causing 32bit write to 16bit block_size field
nmi: Don't try to switch onto extra stack in NMI handler
scsi: Do not call printf() from scsi_is_ready()
coreboot: Check for unaligned cbfs header
Marcel Apfelbaum (1):
fw/pci: do not automatically allocate IO region for PCIe bridges
Roger Pau Monne (1):
build: fix typo in buildversion.py
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Carries two bugfixes and support for multiple pci root buses.
git shortlog rel-1.8.0..rel-1.8.1
=================================
Ameya Palande (1):
x86: add barrier to read{b,w,l} and write{b,w,l} functions
Kevin O'Connor (1):
smp: Fix smp race introduced in 0673b787
Marcel Apfelbaum (2):
fw/pci: scan all buses if extraroots romfile is present
fw/pci: map memory and IO regions for multiple pci root buses
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
'git shortlog 8936dbb2..4c59f5d8' for seabios repo:
David Woodhouse (4):
Update EFI_COMPATIBILITY16_TABLE to match 0.98 spec update
build: use -m16 where available instead of asm(".code16gcc")
romlayout: Use .code16 not .code16gcc
vgabios: Use .code16 not .code16gcc
Gerd Hoffmann (2):
add scripts/tarball.sh
build: set LC_ALL=C
Hannes Reinecke (1):
megasas: read addional PCI I/O bar
Ian Campbell (1):
romlayout: Use "rep ; nop" not "rep nop".
Kevin O'Connor (139):
vgabios: Return from handle_1011() if handler found.
edd: Move EDD get drive parameters (int 1348) logic from disk.c to block.c.
edd: Use sectors==-1 to detect removable media.
edd: Separate out ATA and virtio specific parts of fill_edd().
cdemu: store internal cdemu fields in standard "el-torito" spec format.
Move cdemu call interface and disk_ret helper code to disk.c.
smm: Replace SMI assembler code with C code.
smm: Use a C struct to define the layout of the SMM area.
smp: Replace QEMU SMP init assembler code with C; run only in 32bit mode.
Don't enable thread preemption during S3 resume vga option rom execution.
Remove old Bochs bios fixed address string at 0xfff00.
Move most of the VAR16FIXED() defs to misc.c.
build: Avoid absolute paths during "whole-program" compiling.
Make sure handle_smi() and handle_smp() are compiled out if not enabled.
Remove the TODO file.
Abstract reset call (and possible 16bit mode switch) into reset() function.
build: Remove unused function getSectionsStart() from layoutrom.py.
build: Extract section visiting logic in layoutrom.py.
build: Refactor layoutrom.py gc() function.
build: Use customized entry point for each type of build.
build: Refactor findInit() function.
build: Rework getRelocs() to use a hash instead of categories in layoutrom.py
build: Keep segmented sections separate until final link step.
build: Use fileid instead of category to write sections in layoutrom.py.
build: Only export needed fields in LayoutInfo in layoutrom.py.
build: Get fixed address variables from 32bit compile pass (not 16bit)
build: Minor - fix comments referring to old tools/ directory.
xhci: Update the times for usb command timeouts.
ehci: Update usb command timeouts to use usb_xfer_time()
uhci: Update usb command timeouts to use usb_xfer_time()
ohci: Update usb command timeouts to use usb_xfer_time()
vgabios: Fix broken build resulting from e5749978.
boot: Change ":rom%d" boot order rom instance to ":rom%x"
Minor - remove stray tab from src/fw/smm.c.
build: Update kconfig to version in Linux 3.16.
usb: Fix usb_xfer_time() to work when called in 16bit mode.
xhci: Call usb_desc2pipe() on xhci_update_pipe().
xhci: Remove 16bit code wrappers.
xhci: Use high memory instead of low memory for internal storage.
xhci: Move root hub and setup code to top of file.
xhci: Add xhci_check_ports() and xhci_free_pipes() functions.
ehci: Move port power up from ehci_hub_detect() to check_ehci_ports().
usb-hub: Enable power to all ports prior to calling usb_enumerate().
xhci: Change xhci_hub_detect() to use connect status instead of link state.
uhci: Repeatedly poll for device detect for 100ms.
ohci: Repeatedly poll for device detect for 100ms.
ehci: Stall uhci/ohci init only until default port routing is done.
usb: Perform device detect polling on all usb controllers.
ehci: Fix bug in hub port assignment
Revert "Use the extra stack for 16bit USB and PS2 keyboard/mouse commands."
pmm: Fix entry point to support non-zero %ss
Move stack hop code below call32/call16 code in stacks.c
Add need_hop_back() call that determines if stack_hop_back is needed
Update invoke_mouse_handler() to use need_hop_back()
Update stack_hop_back() to jump to 16bit mode if called in 32bit mode.
Track when entering via call32() and use the same mode for stack_hop_back()
Simplify farcall16 code
Update reset() to use call16_back()
build: Support declaring 32bit C functions that must reside in the f-segment
Move call16() functions from romlayout.S to inline assembler in stacks.c
Break up call32() into call32() and call32_sloppy()
Fully restore 16bit state during call16_sloppy()
Implement call32 mechanism using SMIs.
Move a20 code from system.c and ps2port.h to x86.h
Backup and restore a20 on call32_sloppy()
usb: Rename ?hci_control() to ?hci_send_control()
usb: Rename usb_getFrameExp() to usb_get_period()
usb: Rename findEndPointDesc() to usb_find_desc()
usb: Rename send_default_control() to usb_send_default_control()
usb: Rename free_pipe() to usb_free_pipe()
usb: Clarify usb freelist manipulations
xhci: Change xhci_update_pipe() to xhci_realloc_pipe() and use for alloc too
uhci: Export uhci_realloc_pipe() instead of uhci_alloc_pipe()
ohci: Export ohci_realloc_pipe() instead of ohci_alloc_pipe()
ehci: Export ehci_realloc_pipe() instead of ehci_alloc_pipe()
usb: Use usb_realloc_pipe for pipe alloc, update, and free.
Use 32bit memcpy in int1587 when applicable
Don't clobber %ax on ENTRY_INTO32 macro
Create assembler macros for saving and restoring 'struct bregs'
Do full BREGS backup/restore for pmm, pnp, and irqentry_extrastack
Remove unused macro ENTRY_ST
vgabios: Don't declare custom internal BDA storage in std/bda.h
vgabios: Cache a pointer to the current mode struct in the BDA
vgabios: Don't pass vmode_g to vgafb_move_chars() / vgafb_clear_chars()
vgabios: Rename vbe_flags to flags
vgabios: Set cursor shape fixes
vgabios: Refactor get/set_cursor_shape() code
vgabios: Only init BDA device details in init_bios_area()
vgabios: Only set the dcc_index=8 if stdvga ports are available
vgabios: Move standard table definitions to std/vga.h
vgabios: Fill in available legacy modes in video_func_static at runtime
vgabios: Add support for reading framebuffer in "direct" mode
Fix PNP regression introduced in 99cb8f3e due to missed conversion
Minor - move PORT_PS2_CTRLB from hw/ps2port.h to hw/timer.c
vgabios: Support emulating text mode attributes while in graphics mode
vgabios: Add software cursor capability
Use an aligned stack offset when entering on the extra stack
Minor - comment updates in romlayout.S
Fix build issue on gcc34
pciinit: Fix build warning in mch_pci_slot_get_irq()
floppy: Make sure to yield() during floppy PIO
Minor - be consistent in placement of .code16/32 in romlayout.S
Use macros for .code16/32 mode switches in inline asm in stacks.c
Eliminate FUNCFSEG - only force portions of inline asm to f-segment
usb: Update USB hub code to support super speed hubs
Simplify README files - point to online documentation instead
sdcard: Initial support for SD cards on PCI SDHCI controllers on QEMU
Add wiki documentation to repository
docs: Don't point to repo README files
docs: Add info on MODE16/MODESEGMENT compile time flags
docs: Add page describing SeaBIOS final object linking
scsi: Move cdb_* functions above scsi_* functions
scsi: Move process_scsi_op() to hw/blockcmd.c and rename
cdrom: call scsi_process_op() instead of cdb_read()
scsi: Don't export cdb_* functions
cdrom: Break up very large read requests into smaller requests
block: Check for read/write requests over 64K
usb: Add support for OHCI bulk transfers
readserial: Enhance pipe support
docs: Add documentation on using readserial.py script
uhci: Enable "depth" tree traversal for bulk transfers
uhci: Increase bulk transfer STACKTDS to 16
vgabios: Support emulated text in gfx_read_char()
ehci: No need to support td array wrapping
ehci: Simplify fillTDbuffer() and rename
ehci: Merge ehci_send_control with ehci_send_bulk
ohci: Merge ohci_send_control with ohci_send_bulk
uhci: Merge uhci_send_control with uhci_send_bulk
xhci: Merge xhci_send_control with xhci_send_bulk
usb: Use usb_send_pipe() now that all drivers have x_send_pipe()
xhci: Move xhci_xfer_x() functions together
xhci: Merge some xhci_xfer_x() functions into xhci_send_pipe()
usb: Control transfers always have an 8 byte command size
usb: Minor - properly free memory on get_device_config() error path
checkstack: Handle callw instruction
docs: Document why v1.6.3 release came after v0.6.2
docs: Update release history with dates of stable releases
docs: There is only one VAR16 flag now
docs: Note v1.8.0 release
Marcel Apfelbaum (1):
hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
Markus Armbruster (1):
boot: Fix boot order for SCSI target, lun > 9
Paolo Bonzini (5):
piix: add and use dev-piix.h
smm: complete SMM setup
smm: unify SMM handlers
vgabios: fix graphics operation with Bochs VGA in non-DISPI modes
vgabios: implement read char in graphics mode
zhanghailiang (1):
acpi: use specified macro instead of magic-number
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
git shortlog since 1.7.5:
Hannes Reinecke (1):
megasas: read addional PCI I/O bar
Kevin O'Connor (5):
boot: Change ":rom%d" boot order rom instance to ":rom%x"
vgabios: Return from handle_1011() if handler found.
Don't enable thread preemption during S3 resume vga option rom execution.
build: Avoid absolute paths during "whole-program" compiling.
ehci: Fix bug in hub port assignment
Marcel Apfelbaum (1):
hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
Markus Armbruster (1):
boot: Fix boot order for SCSI target, lun > 9
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
git shortlog since -rc1:
Gerd Hoffmann (2):
acpi: remove PORT_ACPI_PM_BASE constant
Allow using full io region on q35.
Kevin O'Connor (2):
vgabios: Add debug message if x86emu leal check triggers.
python3 fixes for vgabios and csm builds.
Paolo Bonzini (1):
smm: remove code to handle ACPI disable/enable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Code grew a bit, had to disable CONFIG_USB_UAS to make the
bios for the old machine types continue top fit into 128k.
git shortlog since 1.7.4:
Eric Northup (2):
init_virtio_blk, init_virtio_scsi: reset HBA on error
vp_init_simple: enable PCI bus-mastering before relying on DMA.
Gabriel L. Somlo (1):
SMBIOS: Check for aggregate tables & entry point in fw_cfg
Gerd Hoffmann (4):
smbios: catch zero-length strings
pci: improve io address space allocation
xhci: allocate scratch pad buffers
vga: rework bar detection, add virtio-vga
Johannes Krampf (5):
build: Remove unneccesary semicolons from acpi_extract scripts.
build: Make print statements in scripts python3 compatible.
build: Be explicit that we want integers when dividing for python3 compat.
build: Avoid sort() on unordered classes for python3 compatibility.
build: Be careful with unicode and byte strings for python3 compatibility.
Kevin O'Connor (79):
build: Don't trash the .config file when src/Kconfig changes.
Remove the pmm handle argument from _malloc().
Clear the total block transfer count on error.
Remove unnecesary updates of the disk op->count field.
Always perform thread cleanup on MainThread stack.
pvscsi: Don't store reference to struct pci_device.
pvscsi: Always run entirely in 32bit mode.
pvscsi: Remove use of LOWFLAT and GLOBALFLAT macros.
usb: Replace EHCI to UHCI/OHCI synchronization with new scheme.
Minor - pciinit.c - order header files and use static on local functions.
Minor - fix misspelling in romfile.c comment.
ehci: memset the qTD structures in ehci_alloc_intr_pipe
build: Update kconfig to version in Linux 3.13.
scripts: Allow encodeint.py to take integers in hex notation.
coreboot: Support alternative locations for CBFS.
debug: Add runtime option to not report the debug serial port to the OS.
debug: Only call serial_debug_preinit() at startup.
debug: Unify the SeaBIOS debug version banner.
xhci: Use 64bit writes to ERDP register.
xhci: Fix incorrect direction setting on status transmissions.
xhci: Set the interval parameter on interrupt pipes.
xhci: Verify PAGESIZE register before initializing driver.
xhci: Allocate and free the xhci inctx structure on each use.
xhci: Move set_address code from xhci_control to xhci_alloc_pipe.
xhci: Eliminate 'struct xhci_device'.
xhci: Support xhci controllers with 64 byte contexts.
xhci: Allow the XHCI USB controller to be enabled for coreboot.
xhci: Don't use a dummy endpoint count in configure command.
xhci: Report the "protocol defined" and PSIC bits of extended capabilities.
xhci: Support USB hubs on xhci controllers.
Add call32_params() helper function.
Add space between DTYPE_* definitions.
xhci: Run the XHCI driver entirely in 32bit mode.
Remove pci_writel() and pci_readl() functions.
xhci: Check if scratch pad allocation fails.
Increase maximum size of permanent high memory area.
usb: USB 3 devices encode bMaxPacketSize0 field.
usb: Move default pipe max packet size code from xhci to main code.
xhci: Use the same endpoint initialization code in xhci_alloc_pipe()
xhci: Add copyright notice to usb-xhci.c
vgabios: Make sure exported structs use PACKED.
vgabios: Simplify the bios save state area.
vgabios: Simplify save/restore mechanism.
vgabios: Attempt to detect old x86emu and force a fault.
vgabios: Don't interpret TAB character.
vgabios: Refactor write_teletype and write_chars.
vgabios: Make sure stdvga_list_modes() doesn't overrun the buffer.
coreboot: Add support for a "links" file to have aliases in CBFS.
Enhance nullTrailingSpace() so that it can also skip leading spaces.
coreboot: Move links file processing to its own function.
vgabios: Fix PMM allocation request size.
smbios: Default all values to zero.
usb: Only disable HID devices if both USB_MOUSE and USB_KEYBOARD are off.
Minor - fix some typos in comments.
Replace CONFIG_THREAD_OPTIONROMS with a runtime config setting.
acpi: Move acpi parsing logic from acpi.c to biostables.c / paravirt.c.
smbios: Move smbios parsing logic from smbios.c to biostables.c.
Move PirAddr definition from pirtable.c to biostables.c.
Use biostables.c for copying bios tables even when generating them.
Document no new changes to pirtable.c, mptable.c, acpi.c, and smbios.c.
apm: Remove old Bochs mechanism for shutdown/suspend/standby.
Minor - remove unused includes from pci.c.
vgabios: Add option to control use of standard VGA IO ports.
vgabios: Split vgafb_scroll() into separate move and clear functions.
vgabios: Rewrite vgafb.c graphics operations to set of 4 standard operators.
vgabios: Introduce text_address().
vgabios: Add support for manipulating framebuffers in high memory.
Set the color attribute when calling vgabios print character.
vgabios: PMM scan was incorrectly depending on a zero %ds segment.
coreboot: Make coreboot table searching available to other code.
vgabios: Initial support for coreboot native vga vgabios.
Minor - replace some tab characters that slipped into the code.
Factor out smbios table walking from display_uuid to smbios_next().
vgabios: Define PlatformRunningOn to make compile happy.
If an int 1587 call is made from an option rom, stay in bigreal mode.
xhci: Use msleep() instead of mdelay() for port status delay.
build: Make sure romlayout.o is recompiled on Kconfig change.
Fix int 1589 calls when CONFIG_ENTRY_EXTRASTACK is enabled.
acpi: Fix acpi dsdt compile warning.
Laszlo Ersek (1):
init_virtio_scsi(): reset the HBA before freeing its virtio ring
Marcel Apfelbaum (3):
resume: restore piix pm config registers after resume
hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached
hw/pci: check if pci2pci bridges implement optional limit registers
Roger Pau Monne (1):
ld: don't hardcode "-melf_i386"
Sander Eikelenboom (1):
Prevent build failure by not splitting line in the middle of arguments to checkrom.py script
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This also switches from lgplvgabios to seavgabios.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
aliguori: update VGA BIOS
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Now built from the kernel.org git tree.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6079 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
fully tested) - automatic generation of VBE mode table
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1959 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
change bug)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1925 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
added 1600x1200x8 Cirrus mode
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1789 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
1280x1024x[8,15,16] modes
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1159 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1126 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@983 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@974 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@905 c046a42c-6fe2-441c-8c8c-71466251a162
|
