| Age | Commit message (Collapse) | Author |
|---|
|
start.S currently cannot be compiled with Clang 16 and binutils 2.40:
ld: start.o(.text+0x8): misaligned symbol `__bss_start' (0xc1e5) for
relocation R_390_PC32DBL
According to the built-in linker script of ld, the symbol __bss_start
can actually point *before* the .bss section and does not need to have
any alignment, so in certain situations (like when using the internal
assembler of Clang), the __bss_start symbol can indeed be unaligned
and thus it is not suitable for being used with the "larl" instruction
that needs an address that is at least aligned to halfwords.
The problem went unnoticed so far since binutils <= 2.39 did not
check the alignment, but starting with binutils 2.40, such unaligned
addresses are now refused.
Fix it by loading the address indirectly instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2216662
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Suggested-by: Andreas Krebbel <andreas.krebbel@de.ibm.com>
Message-Id: <20230629104821.194859-8-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The stack array is only referenced from the start-up code (which is
shared between the s390-ccw.img and the s390-netboot.img), but it is
currently declared twice, once in main.c and once in netmain.c.
It makes more sense to declare this in start.S instead - which will
also be helpful in the next patch, since we need to mention the .bss
section in start.S in that patch.
While we're at it, let's also drop the huge alignment of the stack,
since there is no technical requirement for aligning it to page
boundaries.
Message-Id: <20230627074703.99608-4-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Providing the space of a stack frame is the duty of the caller,
so we should reserve 160 bytes before jumping into the main function.
Otherwise the main() function might write past the stack array.
While we're at it, add a proper STACK_SIZE macro for the stack size
instead of using magic numbers (this is also required for the following
patch).
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-3-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
start.S is currently indented with a mixture of spaces and tabs, which
is quite ugly. QEMU coding style says indentation should be 4 spaces,
and this is also what we are using in the assembler files in the
tests/tcg/s390x/ folder already, so let's adjust start.S accordingly.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-2-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Recent versions of ld complain when linking the s390-ccw bios:
/usr/bin/ld: warning: start.o: missing .note.GNU-stack section implies
executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in
a future version of the linker
We can silence the warning by telling the linker to mark the stack
as not executable.
Message-Id: <20230622130822.396793-1-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The types starting with double underscores have likely been
introduced into the s390-ccw bios to be able to re-use structs
from the Linux kernel in the past, but the corresponding structs
in cio.h have been changed there a long time ago already to not
use the variants with the double underscores anymore:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/drivers/s390/cio/cio.h?id=cd6b4f27b9bb2a
So it would be good to replace these in the s390-ccw bios now, too.
Message-Id: <20230627114101.122231-1-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Any good reason why this still exist?
I can understand u* and __u* to be linux kernel like, but ulong?
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230629104821.194859-2-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
In the beginning, the network bootloader was considered experimental and
thus optional, but it is well established nowadays and configure always
checks for roms/SLOF before compiling pc-bios/s390-ccw.
Therefore, it makes sense to always build it together with the other
part of the s390-ccw bios.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the handling of the roms/SLOF submodule out of the main Makefile,
since we are going to remove submodules from the build process of QEMU.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check for a List Directed IPL Boot Record, which would supersede the CCW type
entries. If the record is valid, proceed to use the new style pointers
and perform LD-IPL. Each block pointer is interpreted as either an LD-IPL
pointer or a legacy CCW pointer depending on the type of IPL initiated.
In either case CCW- or LD-IPL is transparent to the user and will boot the same
image regardless of which set of pointers is used. Because the interactive boot
menu is only written with the old style pointers, the menu will be disabled for
List Directed IPL from ECKD DASD.
If the LD-IPL fails, retry the IPL using the CCW type pointers.
If no LD-IPL boot record is found, simply perform CCW type IPL as usual.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-Id: <20230221174548.1866861-2-jrossi@linux.ibm.com>
[thuth: Drop some superfluous parantheses]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more common spelling here.
Message-Id: <20221111182828.282251-1-thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-31-alex.bennee@linaro.org>
|
|
In preparation for adding Docker container support, detect compiler options
just once rather than once per Make run; container startup overhead is
substantial and doing the detection just once makes things faster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-15-alex.bennee@linaro.org>
|
|
For accessing single blocks during boot, it's the logical block size that
matters. (Physical block sizes are rather interesting e.g. for creating
file systems with the correct alignment for speed reasons etc.).
So the s390-ccw bios has to use the logical block size for calculating
sector numbers during the boot phase, the "physical_block_exp" shift
value must not be taken into account. This change fixes the boot process
when the guest hast been installed on a disk where the logical block size
differs from the physical one, e.g. if the guest has been installed
like this:
qemu-system-s390x -nographic -accel kvm -m 2G \
-drive if=none,id=d1,file=fedora.iso,format=raw,media=cdrom \
-device virtio-scsi -device scsi-cd,drive=d1 \
-drive if=none,id=d2,file=test.qcow2,format=qcow2
-device virtio-blk,drive=d2,physical_block_size=4096,logical_block_size=512
Linux correctly uses the logical block size of 512 for the installation,
but the s390-ccw bios tries to boot from a disk with 4096 block size so
far, as long as this patch has not been applied yet (well, it used to work
by accident in the past due to the virtio_assume_scsi() hack that used to
enforce 512 byte sectors on all virtio-block disks, but that hack has been
well removed in commit 5447de2619050a0a4d to fix other scenarios).
Fixes: 5447de2619 ("pc-bios/s390-ccw/virtio-blkdev: Remove virtio_assume_scsi()")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2112303
Message-Id: <20220805094214.285223-1-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The option generates a lot of warnings for integers casted to pointers,
for example:
/home/pbonzini/work/upstream/qemu/pc-bios/s390-ccw/dasd-ipl.c:174:19: warning: array subscript 0 is outside array bounds of ‘CcwSeekData[0]’ [-Warray-bounds]
174 | seekData->cyl = 0x00;
| ~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* fuzzing fixes (Alexander)
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
# gpg: Signature made Tue 12 Jul 2022 13:47:19 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
meson: place default firmware path under .../share
qga: Relocate a path emitted in the help text
build: Do not depend on pc-bios for config-host.mak
accel: kvm: Fix memory leak in find_stats_descriptors
audio/dbus: fix building
fuzz: only use generic-fuzz targets on oss-fuzz
build: improve -fsanitize-coverage-allowlist check
build: try both native and cross compilers
configure: pass whole target name to probe_target_compiler
tests/tcg: compile system emulation tests as freestanding
configure: write EXTRA_CFLAGS for all sub-Makefiles
configure: allow more host/target combos to use the host compiler
configure, pc-bios/vof: pass cross CFLAGS correctly
configure, pc-bios/s390-ccw: pass cross CFLAGS correctly
configure, pc-bios/optionrom: pass cross CFLAGS correctly
pc-bios/optionrom: use -m16 unconditionally
scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
tests/vm: do not specify -bios option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# pc-bios/s390-ccw/netboot.mak
|
|
When compiling the s390-ccw bios with Clang (v14.0), there is currently
an unuseful warning like this:
CC pc-bios/s390-ccw/ipv6.o
../../roms/SLOF/lib/libnet/ipv6.c:447:18: warning: variable length array
folded to constant array as an extension [-Wgnu-folding-constant]
unsigned short raw[ip6size];
^
SLOF is currently GCC-only and cannot be compiled with Clang yet, so
it is expected that such extensions sneak in there - and as long as
we don't want to compile the code with a compiler that is neither GCC
or Clang, it is also not necessary to avoid such extensions.
Thus these GNU-extension related warnings are completely useless in
the s390-ccw bios, especially in the code that is coming from SLOF,
so we should simply disable the related warnings here now.
Message-Id: <20220704111903.62400-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
All the other protytpes in the headers here do not use the "extern"
keyword, so let's unify this by removing the "extern" from the misfits,
too.
Message-Id: <20220704111903.62400-12-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The virtio-blk code uses the block size and geometry fields in the
config area. According to the virtio-spec, these have to be negotiated
with the right feature bits during initialization, otherwise they
might not be available. QEMU is so far very forgiving and always
provides them, but we should not rely on this behavior, so let's
better request them properly via the VIRTIO_BLK_F_GEOMETRY and
VIRTIO_BLK_F_BLK_SIZE feature bits.
Message-Id: <20220704111903.62400-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The next patch is going to add more virtio-block specific code to
virtio_blk_setup_device(), and if the virtio-scsi code is also in
there, this is more cumbersome. And the calling function virtio_setup()
in main.c looks at the device type already anyway, so it's more
logical to separate the virtio-scsi stuff into a new function in
virtio-scsi.c instead.
Message-Id: <20220704111903.62400-10-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
It looks nicer if we separate the run_ccw() from the IPL_assert()
statement, and the error message should talk about "virtio device"
instead of "block device", since this code is nowadays used for
non-block (i.e. network) devices, too.
Message-Id: <20220704111903.62400-9-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Feature negotiation should be done first, since some fields in the
config area can depend on the negotiated features and thus should
rather be read afterwards.
While we're at it, also adjust the error message here a little bit
(the code is nowadays used for non-block virtio devices, too).
Message-Id: <20220704111903.62400-8-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
According chapter "3.1.1 Driver Requirements: Device Initialization"
of the Virtio specification (v1.1), a driver for a device has to set
the ACKNOWLEDGE and DRIVER bits in the status field after resetting
the device. The s390-ccw bios skipped these steps so far and seems
like QEMU never cared. Anyway, it's better to follow the spec, so
let's set these bits now in the right spots, too.
Message-Id: <20220704111903.62400-7-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The virtio_assume_scsi() function is very questionable: First, it
is only called for virtio-blk, and not for virtio-scsi, so the naming
is already quite confusing. Second, it is called if we detected a
"invalid" IPL disk, trying to fix it by blindly setting a sector
size of 512. This of course won't work in most cases since disks
might have a different sector size for a reason.
Thus let's remove this strange function now. The calling code can
also be removed completely, since there is another spot in main.c
that does "IPL_assert(virtio_ipl_disk_is_valid(), ...)" to make
sure that we do not try to IPL from an invalid device.
Message-Id: <20220704111903.62400-6-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The s390-ccw bios fails to boot if the boot disk is a virtio-blk
disk with a sector size of 4096. For example:
dasdfmt -b 4096 -d cdl -y -p -M quick /dev/dasdX
fdasd -a /dev/dasdX
install a guest onto /dev/dasdX1 using virtio-blk
qemu-system-s390x -nographic -hda /dev/dasdX1
The bios then bails out with:
! Cannot read block 0 !
Looking at virtio_ipl_disk_is_valid() and especially the function
virtio_disk_is_scsi(), it does not really make sense that we expect
only such a limited disk geometry (like a block size of 512) for
our boot disks. Let's relax the check and allow everything that
remotely looks like a sane disk.
Message-Id: <20220704111903.62400-5-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The logic of trying an final ISO or ECKD boot on virtio-block devices is
very weird: Since the geometry hardly ever matches in virtio_disk_is_scsi(),
virtio_blk_setup_device() always sets a "guessed" disk geometry via
virtio_assume_scsi() (which is certainly also wrong in a lot of cases).
zipl_load_vblk() then sees that there's been a "virtio_guessed_disk_nature"
and tries to fix up the geometry again via virtio_assume_iso9660() before
always trying to do ipl_iso_el_torito(). That's a very brain-twisting
way of attempting to boot from ISO images, which won't work anymore after
the following patches that will clean up the virtio_assume_scsi() mess
(and thus get rid of the "virtio_guessed_disk_nature" here).
Let's try a better approach instead: ISO files always have a magic
string "CD001" at offset 0x8001 (see e.g. the ECMA-119 specification)
which we can use to decide whether we should try to boot in ISO 9660
mode (which we should also try if we see a sector size of 2048).
And if we were not able to boot in ISO mode here, the final boot attempt
before panicking is to boot in ECKD mode. Since this is our last boot
attempt anyway, simply always assume the ECKD geometry here (if the sector
size was not 4096 yet), so that we also do not depend on the guessed disk
geometry from virtio_blk_setup_device() here anymore.
Message-Id: <20220704111903.62400-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Use VIRTIO_DASD_DEFAULT_BLOCK_SIZE instead of the magic value 4096.
Message-Id: <20220704111903.62400-3-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Older versions of Clang complain if there is no prototype for main().
Add one, and while we're at it, make sure that we use the same type
for main.c and netmain.c - since the return value does not matter,
declare the return type of main() as "void".
Message-Id: <20220704111903.62400-2-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
QEMU_CFLAGS is not available in pc-bios/s390-ccw/netboot.mak, but the Makefile
needs to access the flags passed to the configure script for the s390x
cross compiler. Fix everything and rename QEMU_CFLAGS to EXTRA_CFLAGS for
consistency with tests/tcg.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While container-based cross compilers are not supported, this already makes
it possible to build s390-ccw on any machine that has s390x GCC and binutils
installed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-25-alex.bennee@linaro.org>
|
|
Always include the STRIP variable in config-host.mak (it's only used
by the s390-ccw firmware build, and it adds a default if configure
omitted it), and use meson-buildoptions.sh to turn
--enable/--disable-strip into -Dstrip.
The default is now not to strip the binaries like for almost every other
package that has a configure script.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit cc3d15a5ea ("docs: rstfy s390 dasd ipl documentation")
converted docs/devel/s390-dasd-ipl.txt to docs/devel/s390-dasd-ipl.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/s390-dasd-ipl.txt/s390-dasd-ipl.rst/ \
$(git grep -l docs/devel/s390-dasd-ipl.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210517151702.109066-6-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Clang versions before v11.0 insist on having the %rX or %cX register
names instead of just a number. Since our Travis-CI is currently
still using Clang v6.0, we have to fix this to avoid failing jobs.
Message-Id: <20210512171550.476130-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When building on Fedora 34 (gcc version 11.0.0 20210210) we get:
In file included from pc-bios/s390-ccw/main.c:11:
In function ‘memset’,
inlined from ‘boot_setup’ at pc-bios/s390-ccw/main.c:185:5,
inlined from ‘main’ at pc-bios/s390-ccw/main.c:288:5:
pc-bios/s390-ccw/libc.h:28:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
28 | p[i] = c;
| ~~~~~^~~
The offending code is:
memset((char *)S390EP, 0, 6);
where S390EP is a const address:
#define S390EP 0x10008
The compiler doesn't know how big that pointed area is, so it assume that
its length is zero. This has been reported as BZ#99578 to GCC:
"gcc-11 -Warray-bounds or -Wstringop-overread warning when accessing a
pointer from integer literal"
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
As this warning does us more harm than good in the BIOS code (where
lot of direct accesses to low memory are done), silence this warning
for all BIOS objects.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210422145911.2513980-1-philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210502174836.838816-4-thuth@redhat.com>
[thuth: Use the pre-existing cc-option macro instead of adding a new one]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The cc-option macro is not doing what it should - compared with the
original from the rules.mak file that got removed with commit
660f793093 ("Makefile: inline the relevant parts of rules.mak"),
the arguments got changed and thus the macro is rather doubling
the QEMU_CFLAGS than adding the flag that should be tested.
Message-Id: <20210502174836.838816-3-thuth@redhat.com>
Fixes: 22fb2ab096 ("pc-bios/s390-ccw: do not use rules.mak")
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When compiling the s390-ccw bios with Clang, the compiler emits a warning:
pc-bios/s390-ccw/main.c:210:5: warning: variable 'found' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
pc-bios/s390-ccw/main.c:214:16: note: uninitialized use occurs here
IPL_assert(found, "Boot device not found\n");
^~~~~
It's a false positive, it only happens because Clang is not smart enough
to see that the panic() function in the "default:" case can never return.
Anyway, let's explicitely mark panic() with "noreturn" to shut up the
warning.
Message-Id: <20210502174836.838816-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We are using the compiler to do the linking of the bios files. GCC still
accepts the "-Ttext=..." linker flag directly and is smart enough to
pass it to the linker, but in case we are compiling with Clang, we have
to use the official way with the "-Wl," prefix instead.
Message-Id: <20210423153646.593153-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When compiling the s390-ccw bios with clang, it emits a warning like this:
pc-bios/s390-ccw/jump2ipl.c:86:9: warning: indirection of non-volatile null
pointer will be deleted, not trap [-Wnull-dereference]
if (*((uint64_t *)0) & RESET_PSW_MASK) {
^~~~~~~~~~~~~~~~
pc-bios/s390-ccw/jump2ipl.c:86:9: note: consider using __builtin_trap() or
qualifying pointer with 'volatile'
We could add a "volatile" here to shut it up, but on the other hand,
we also have a pointer variable called "reset_psw" in this file already
that points to the PSW at address 0, so we can simply use that pointer
variable instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210423142440.582188-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When compiling the s390-ccw bios with Clang, the compiler complains:
pc-bios/s390-ccw/bootmap.c:302:9: warning: logical not is only applied
to the left hand side of this comparison [-Wlogical-not-parentheses]
if (!mbr->dev_type == DEV_TYPE_ECKD) {
^ ~~
The code works (more or less by accident), since dev_type can only be
0 or 1, but it's better of course to use the intended != operator here
instead.
Fixes: 5dc739f343 ("Allow booting in case the first virtio-blk disk is bad")
Message-Id: <20210421163331.358178-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Don't read the block if a null block number is reached, because this means that
the end of chunk is reached.
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20210416074736.17409-1-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
A Linux binary will have the string "S390EP" at address 0x10008,
which is important in getting the guest up off the ground. In the
case of a reboot (specifically chreipl going to a new device),
we should defer to the PSW at address zero for the new config,
which will re-write "S390EP" from the new image.
Let's clear it out at this point so that a reipl to, say, a DASD
passthrough device drives the IPL path from scratch without disrupting
disrupting the order of operations for other boots.
Rather than hardcoding the address of this magic (again), let's
define it somewhere so that the two users are visibly related.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20201120160117.59366-3-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
If, for example, we boot off a virtio device and chreipl to a vfio-ccw
device, the space at lowcore will be non-zero. We build a Read IPL CCW
at address zero, but it will have leftover PSW data that will conflict
with the Format-0 CCW being generated:
0x0: 00080000 80010000
------ Ccw0.cda
-- Ccw0.chainData
-- Reserved bits
The data address will be overwritten with the correct value (0x0), but
the apparent data chain bit will cause subsequent memory to be used as
the target of the data store, which may not be where we expect (0x0).
Clear out this space when we boot from DASD, so that we know it exists
exactly as we expect.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201120160117.59366-2-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The architecture states that the iplb location is only written to low
core for list directed ipl and not for traditional ccw ipl. If we don't
skip this then operating systems that load by reading into low core
memory may fail to start.
We should also not write the iplb pointer for network boot as it might
overwrite content that we got via network.
Fixes: 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore")
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201030122823.347140-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PSW.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
If a blob provides a reset PSW then we should use it instead of
branching to the PSW address and using our own mask.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com>
[thuth: Use Elvis operator to shorten long line]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We don't need to save the ipl_continue variable in lowcore and have it
limited to 32 bits because of the lowcore layout. Let's move it to a
new 64 bit variable and get rid of the reset info struct.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The two main types of zipl component entries are execute and
load/data. The last member of the component entry struct therefore
denotes either a PSW or an address. Let's make this a bit more clear
by introducing a union and cleaning up the code that uses that struct
member.
The execute type component entries written by zipl contain short PSWs,
not addresses. Let's mask them and only pass the address part to
jump_to_IPL_code(uint64_t address) because it expects an address as
visible by the name of the argument.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Break the loop if `cur_block_nr` is a null block number because this
means that the end of chunk is reached. In this case we will try to
boot the default entry.
Fixes: ba831b25262a ("s390-ccw: read stage2 boot loader data to find menu")
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-3-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
