aboutsummaryrefslogtreecommitdiff
path: root/pc-bios/s390-ccw/main.c
AgeCommit message (Collapse)Author
2017-07-14pc-bios/s390-ccw: Move virtio-block related functions into a separate fileThomas Huth
The netboot code is going to link against the code from virtio.c, too, so we've got to move the virtio-block and -scsi related code out of the way. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1499863793-18627-4-git-send-email-thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14pc-bios/s390-ccw: Move ebc2asc to sclp.cThomas Huth
We will later need this array in a file that we will link to the netboot code, too. Since there is some ebcdic conversion done in sclp_get_loadparm_ascii(), the sclp.c file seems to be a good candidate. Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1499863793-18627-3-git-send-email-thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14pc-bios/s390-ccw: Move libc functions to separate headerThomas Huth
The upcoming netboot code will use the libc from SLOF. To be able to still use s390-ccw.h there, the libc related functions in this header have to be moved to a different location. And while we're at it, remove the duplicate memcpy() function from sclp.c. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1499863793-18627-2-git-send-email-thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-05-02pc-bios/s390-ccw: provide a function to interpret LOADPARM valueFarhan Ali
The LOADPARM value is fetched from SCP Read Info, but it's applied only at the phase of bootmap interpretation. So let's read the LOARPARM value and store it. Also provide a parsing function to detect numbers in the LOADPARM which can be used during bootmap interpretation. Remove a stray whitespace. Initial patch from Eugene (jno) Dvurechenski. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-05-02pc-bios/s390-ccw: Make ebcdic/ascii conversion publicEugene (jno) Dvurechenski
Make the ebcdic_to_ascii function public to the rest of the "bios" code, as the volume label is no more the single thing to be converted. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-02-28pc-bios/s390-ccw: Use the ccw bios to start the network bootFarhan Ali
We want to use the ccw bios to start final network boot. To do this we use ccw bios to detect if the boot device is a virtio network device and retrieve the start address of the network boot image. Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-11pc-bios/s390-ccw: Pass selected SCSI device to IPLEugene (jno) Dvurechenski
There is ,bootindex=%d argument to specify the lookup order of boot devices. If a bootindex assigned to the device, then IPL Parameter Info Block is created for that device when it is IPLed from. If it is a mere SCSI device (not FCP), then IPIB is created with a special SCSI type and its fields are used to store SCSI address of the device. This new ipl block is private to qemu for now. If the device to IPL from is specified this way, then SCSI bus lookup is bypassed and prescribed devices uses the address specified. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-05-17pc-bios/s390-ccw: Get device address via diag 308/6Alexander Yarygin
To IPL from a device, pc-bios receives from qemu a device address via general register 7. The better way to do it is to use diag308/6 instruction which returns so called "IplParameterBlock". IplParameterBlock contains the device address for IPL and additional parameters that can be used by pc-bios. This patch allows pc-bios to get device address via diag308/6 and doesn't use gr7 passed boot information anymore. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-23pc-bios/s390-ccw: enable virtio-scsiEugene (jno) Dvurechenski
Make the code added before to work. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-23pc-bios/s390-ccw: make provisions for different backendsEugene (jno) Dvurechenski
Add dispatching code to make room for non virtio-blk boot devices. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-23pc-bios/s390-ccw: update virtio implementation to allow up to 3 vringsEugene (jno) Dvurechenski
Add ability to work with up to 3 vrings, which is required for virtio-scsi implementation. Implement the optional cookie to speed up processing of virtio notifications. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-23pc-bios/s390-ccw: qemuize typesEugene (jno) Dvurechenski
Turn [the most of] existing declarations from struct type_name { ... }; into struct TypeName { ... }; typedef struct TypeName TypeName; and make use of them. Also switch u{8,16,32,64} to uint{8,16,32,64}_t. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-23pc-bios/s390-ccw: virtio_panic -> panicEugene (jno) Dvurechenski
This function has nothing to do with virtio. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-07pc-bios/s390-ccw: Device detection in higher subchannel setsAlexander Yarygin
If no bootdevice was specified, we try to autodetect a suitable IPL device. Current code only searched in subchannel set 0; extend this search to higher subchannel sets as well. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-10s390-ccw.img: Allow bigger ramdisk sizes or offsetsChristian Borntraeger
The s390-ccw bios creates the the virtqueue at 100MB. For big ramdisks or offsets (via zipl) this gets overwritten. As a quick band-aid, lets move the virtqueue into the bss section, which is at 0x7f00000. As the bios code (text) is at 0x7e00000 we can now handle ramdisk which are ~27MB bigger. Long term we want to make the s390-ccw bios position independent and load of at the end of memory. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-Id: <1425310029-53396-2-git-send-email-borntraeger@de.ibm.com>
2015-02-03pc-bios/s390-ccw: fix sparse warningsChristian Borntraeger
Fix some sparse warnings in the s390-ccw bios. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-07-08pc-bios/s390-ccw: store proper subsystem information wordChristian Borntraeger
POP chapter 17 requires to store a subsystem information word at 184 during IPL. Furthermore bytes 188-191 should be zero. The bootmap might contain data blocks that are written to the first page. We have to write these values after we processed the bootmap and before the final IPL. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27pc-bios/s390-ccw: Unify error handlingEugene (jno) Dvurechenski
Convert to IPL_assert and friends Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-02-27s390-ccw.img: Fix sporadic errors with ccw boot image - initialize cssChristian Borntraeger
We have to set the cssid to 0, otherwise the stsch code will return an operand exception without the m bit. In the same way we should set m=0. This case was triggered in some cases during reboot, if for some reason the location of blk_schid.cssid contains 1 and m was 0. Turns out that the qemu elf loader does not zero out the bss section on reboot. The symptom was an dump of the old kernel with several areas overwritten. The bootloader does not register a program check handler, so bios exception jumped back into the old kernel. Lets just use a local struct with a designed initializer. That will guarantee that all other subelements are initialized to 0. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-29s390/IPL: Allow boot from other ssid than 0Dominik Dingel
We now take the subchannel set id also into account to find the boot device. If we want to use a subchannel set other than the default set 0, we first need to enable the mss facility. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: BIOS boot from given deviceDominik Dingel
Use the passed device, if there is no device, use the first applicable device. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26s390-ccw.img: Detect devices with stsch.Cornelia Huck
stsch is the canonical way to detect devices. As a bonus, we can abort the loop if we get cc 3, and we need to check only the valid devices (dnv set). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26s390-ccw.img: replace while loop with a disabled wait on s390 biosChristian Borntraeger
dont waste cpu power on an error condition. Lets stop the guest with a disabled wait. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26S390: ccw firmware: Add main programAlexander Graf
This C file is the main driving piece of the s390 ccw firmware. It provides a search for a workable block device, sets it as the default to boot off of and boots from it. Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-11 16:49:16 +0000