aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2015-06-01vhost-user: add multi queue supportOuyang Changchun
Based on patch by Nikolay Nikolaev: Vhost-user will implement the multi queue support in a similar way to what vhost already has - a separate thread for each queue. To enable the multi queue functionality - a new command line parameter "queues" is introduced for the vhost-user netdev. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-27net/net: Record usage status of mac addressShannon Zhao
Currently QEMU dynamically generates mac address for the NIC which doesn't specify the mac address. But when we hotplug a NIC without specifying mac address, the mac address will increase for the same NIC along with hotplug and hot-unplug, and at last it will overflow. And if we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then hotplug one NIC without specifying mac address and the mac address of the hotplugged NIC is duplicate of "52:54:00:12:34:56". This patch add a mac_table to record the usage status and free the mac address when the NIC is unrealized. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Improve -netdev/netdev_add/-net/... tap error reportingMarkus Armbruster
When -netdev tap fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -netdev tap,id=foo qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized With the command line, the messages go to stderr. In HMP, they go to the monitor. In QMP, the second one becomes the error reply, and the first one goes to stderr. Convert net_init_tap() to Error. This suppresses the unwanted second message, and makes the specific error the QMP error reply. [Dropped duplicate "and" from error message as suggested by Eric Blake: "ifname=, script=, downscript=, and vnet_hdr=, " "queues=, and vhostfds= are invalid with helper=" --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Finish conversion of tap_open() to ErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap-solaris: Convert tap_open() to ErrorMarkus Armbruster
Fixes inappropriate use of syslog(). Not fixed: leaks on error paths, suspicious non-fatal errors. FIXMEs added instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap-bsd: Convert tap_open() to ErrorMarkus Armbruster
Fixes inappropriate use of stderr in monitor command handler. While there, improve some of the messages a bit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap-linux: Convert tap_open() to ErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-12-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Permit incremental conversion of tap_open() to ErrorMarkus Armbruster
Convert the trivial ones immediately: tap-aix and tap-haiku. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert launch_script() to ErrorMarkus Armbruster
Fixes inappropriate use of stderr in monitor command handler. While there, improve the messages some. [Fixed Error **err -> Error *err local variable that broke the build. --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-10-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert net_init_tap_one() to ErrorMarkus Armbruster
[Dropped %s from "tap: open vhost char device failed: %s" since error_setg_errno() already prints a human-readable error string and there is no format string argument. --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-9-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert tap_set_sndbuf() to ErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Improve -netdev/netdev_add/-net/... bridge error reportingMarkus Armbruster
When -netdev bridge fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -netdev bridge,id=foo failed to launch bridge helper qemu-system-x86_64: -netdev bridge,id=foo: Device 'bridge' could not be initialized The first message goes to stderr. Wrong for HMP, because errors need to go to the monitor there. The second message goes to stderr for -netdev, to the monitor for HMP netdev_add, and becomes the error reply for QMP netdev_add. Convert net_bridge_run_helper() to Error, and propagate its errors through net_init_bridge(). This ensures the error gets reported where the user is, and suppresses the unwanted second message. While there, improve the error messages a bit. The above example becomes: $ qemu-system-x86_64 -netdev bridge,id=foo qemu-system-x86_64: -netdev bridge,id=foo: bridge helper failed net_init_tap() also uses net_bridge_run_helper(). Propagate its errors there as well. Improves reporting these errors with -netdev tap & friends. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-7-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: net_tap_fd_init() can't fail, drop dead error handlingMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-6-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net/dump: Improve -net/host_net_add dump error reportingMarkus Armbruster
When -net dump fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -net dump,id=foo,file=/eperm qemu-system-x86_64: -net dump,id=foo,file=/eperm: -net dump: can't open /eperm qemu-system-x86_64: -net dump,id=foo,file=/eperm: Device 'dump' could not be initialized Convert net_init_tap() to Error. This suppresses the unwanted second message. Improve the error messages to include strerror(errno) where appropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-5-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net: Improve -net nic error reportingMarkus Armbruster
When -net nic fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -net nic,netdev=nonexistent qemu-system-x86_64: -net nic,netdev=nonexistent: netdev 'nonexistent' not found qemu-system-x86_64: -net nic,netdev=nonexistent: Device 'nic' could not be initialized Convert net_init_nic() to Error to get rid of the unwanted second error message. While there, tidy up an Overcapitalized Error Message. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-4-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net: Permit incremental conversion of init functions to ErrorMarkus Armbruster
Error reporting for netdev_add is broken: the net_client_init_fun[] report the actual errors with (at best) error_report(), and their caller net_client_init1() makes up a generic error on top. For command line and HMP, this produces an mildly ugly error cascade. In QMP, the actual errors go to stderr, and the generic error becomes the command's error reply. To fix this, we need to convert the net_client_init_fun[] to Error. To permit fixing them one by one, add an Error ** parameter to the net_client_init_fun[]. If the call fails without returning an Error, make up the same generic Error as before. But if it returns one, use that instead. Since none of them does so far, no functional change. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net: Improve error message for -net hubport a bitMarkus Armbruster
Type "hubport" is valid only with -netdev. Unfortunately, that's detected late and the error message doesn't explain why: $ qemu-system-i386 -net hubport,id=foo,hubid=0 qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized Improve the error message to "Parameter 'type' expects a net type". Not fixed: -net hubport without the parameters required by -netdev hubport still asks for those parameters: $ qemu-system-i386 -net hubport qemu-system-i386: -net hubport: Parameter 'hubid' is missing Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11net: add MAC address string printerScott Feldman
We can use this in virtio-net code as well as new Rocker driver code, so up-level this. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-12net: synchronize net_host_device_remove with host_net_remove_completionPaolo Bonzini
Using net_host_check_device is unnecessary. qemu_del_net_client asserts for the non-peer case that it can only process NIC type NetClientStates, and that assertion is valid for the peered case as well, so move it and use the same check in net_host_device_remove. host_net_remove_completion is already checking the type. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Message-id: 1419353600-30519-2-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-10vhost: Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-09Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio fixes and cleanups A bunch of fixes all over the place. All of ACPI refactoring has been merged. Legacy pci commands have been dropped. virtio header cleanup initial patches from virtio-1.0 branch Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (130 commits) acpi: drop unused code aml-build: comment fix acpi-build: fix typo in comment acpi: update generated files vhost user:support vhost user nic for non msi guests aml-build: fix build for glib < 2.22 acpi: update generated files Makefile.target: binary depends on config-devices acpi-test-data: update after pci rewrite acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb(). pci-hotplug-old: Has been dead for five major releases, bury pci: Give a few helpers internal linkage acpi: make build_*() routines static to aml-build.c pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs pc: acpi-build: drop template patching and create PCI bus tree dynamically tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation pc: acpi-build: simplify PCI bus tree generation tests: add ACPI blobs for qemu with bridge cases tests: bios-tables-test: add support for testing bridges tests: ACPI test blobs update due to PCI0._CRS changes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: hw/pci/pci-hotplug-old.c
2015-03-03vhost user:support vhost user nic for non msi guestsHaifeng Gao
Currently, vhost user nic doesn't support non msi guests(like pxe stage) by default. Vhost user nic can't fall back to qemu like normal vhost net nic does. So we should enable it for non msi guests. Signed-off-by: Haifeng Gao <gaohaifeng.gao@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix useMarkus Armbruster
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the error with qerror_report_err(). Most of its users assume the function can't fail. Make them use qemu_opt_set_err() with &error_abort, so that should the assumption ever break, it'll break noisily. Just two users remain, in util/qemu-config.c. Switch them to qemu_opt_set_err() as well, then rename qemu_opt_set_err() to qemu_opt_set(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26QemuOpts: Convert qemu_opts_set() to Error, fix its useMarkus Armbruster
Return the Error object instead of reporting it with qerror_report_err(). Change callers that assume the function can't fail to pass &error_abort, so that should the assumption ever break, it'll break noisily. Turns out all callers outside its unit test assume that. We could drop the Error ** argument, but that would make the interface less regular, so don't. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' ↵Peter Maydell
into staging Clean up around error_get_pretty(), qerror_report_err() # gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-02-18: qemu-char: Avoid qerror_report_err() outside QMP command handlers qemu-img: Avoid qerror_report_err() outside QMP command handlers vl: Avoid qerror_report_err() outside QMP command handlers tpm: Avoid qerror_report_err() outside QMP command handlers numa: Avoid qerror_report_err() outside QMP command handlers net: Avoid qerror_report_err() outside QMP command handlers monitor: Avoid qerror_report_err() outside QMP command handlers monitor: Clean up around monitor_handle_fd_param() error: Use error_report_err() where appropriate error: New convenience function error_report_err() vhost-scsi: Improve error reporting for invalid vhostfd Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-18hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()Markus Armbruster
Some are called do_info_SUBCOMMAND() (old ones, usually), some hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND pointlessly differs in spelling. Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the subcommand name with '-' replaced by '_'. Exceptions: * sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(), sun4m_hmp_info_pic(). * lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(), lm32_hmp_info_pic(). Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18net: Avoid qerror_report_err() outside QMP command handlersMarkus Armbruster
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. Replace by error_report_err() in HMP command handler hmp_host_net_add() and initial startup helpers net_init_client(), net_init_netdev(). Keep it in QMP command handler qmp_netdev_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18monitor: Clean up around monitor_handle_fd_param()Markus Armbruster
monitor_handle_fd_param() is a wrapper around monitor_handle_fd_param2() that feeds errors to qerror_report_err() instead of returning them. qerror_report_err() is inappropriate in many contexts. monitor_handle_fd_param() looks simpler than monitor_handle_fd_param2(), which tempts use. Remove the temptation: drop the wrapper and open-code the (trivial) error handling instead. Replace the open-coded qerror_report_err() by error_report_err() in places that already use error_report(). Turns out that's everywhere. While there, rename monitor_handle_fd_param2() to monitor_fd_param(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-06net: del hub port when peer is deletedJason Wang
We should del hub port when peer is deleted since it will not be reused and will only be freed during exit. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1422860798-17495-3-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06net: remove the wrong comment in net_init_hubport()Jason Wang
Not only nic could be the one to peer. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1422860798-17495-2-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06monitor: print hub port name during info networkJason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1422860798-17495-1-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-19net: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-19net: Fuse g_malloc(); memset() into g_new0()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-19tap: fix vcpu long time io blocking on tapWangkai (Kevin,C)
[Adjusted doc comment for grammar. --Stefan] Signed-off-by: Wangkai <wangkai86@huawei.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-21net/socket: fix Uninitialized scalar variableGonglei
If is_connected parameter is false, the saddr variable will no initialize. Coverity report: uninit_use: Using uninitialized value saddr.sin_port. We don't need add saddr information to nc->info_str when is_connected is false. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-21net/slirp: fix memory leakGonglei
commit b412eb61 introduce 'cmd:' target for guestfwd, and fwd don't be used in this scenario, and will leak memory in true branch with 'cmd:'. Let's allocate memory for fwd variable just in else statement. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-18net: The third parameter of getsockname should be initializedzhanghailiang
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-17l2tpv3: fix fd leakGonglei
In this false branch, fd will leak when it is zero. Change the testing condition. Signed-off-by: Gonglei <arei.gonglei@huawei.com> [Fix net_l2tpv3_cleanup as well. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-14l2tpv3: fix possible double freezhanghailiang
freeaddrinfo(result) does not assign result = NULL, after frees it. There will be a double free when it goes error case. It is reported by covertiy. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Cc: qemu-stable@nongnu.org Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-11slirp/smbd: modify/set several parameters in generated smbd.confPeter Wu
The file sharing module should not handle printers, so disable it. The options 'load printers' and 'printing' have been available since the beginning (May 1996, commit 0e8fd3398771da2f016d72830179507f3edda51b). Option 'disable spoolss' is available since Samba 2.0.4, commit de5f42c9d9172592779fa2504d44544e3b6b1c0d). Next, "socket address" was reported as deprecated, use a combination of "interfaces" and "bind interfaces only" instead (available since October 1997, commit 79f4fb52c1ed56fd843f81b4eb0cdd2991d4d0f4). Override cache directory to avoid writing to a global directory. Option available since Samba 3.4.0, Jan 2009, commit 19a05bf2f485023b11b41dfae3f6459847d55ef7. Set "usershare max shared=0" to prevent a global directory from being used. Option available since Samba 3.0.23, February 2006, commit 5831715049f2d460ce42299963a5defdc160891b. The last option was introduced with Samba 3.4.0, but previously "state directory" was already added which exists in Samba 3.4.0. As unknown parameters are ignored (while printing a warning), it should be safe to add another option. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-02tap: fix possible fd leak in net_init_tapGonglei
In hotplugging scenario, taking those true branch, the file handler do not be closed. Let's close them before return. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-02tap: do not close(fd) in net_init_tap_oneGonglei
commit 5193e5fb (tap: factor out common tap initialization) introduce net_init_tap_one(). But it's inappropriate that we close fd in net_init_tap_one(), we should lay it in the caller, becuase some callers needn't to close it if we get the fd by monitor_handle_fd_param(). On the other hand, in other exceptional branches fd isn't closed, so that's incomplete anyway. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-02tap_int.h: remove repeating NETWORK_SCRIPT definesGonglei
DEFAULT_NETWORK_SCRIPT and DEFAULT_NETWORK_DOWN_SCRIPT have been defined in net/net.h included in tap.c, which is the only C file that using those two macro. Let's remove the repeating macroinstruction. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-02net/slirp: specify logbase for smbdMichael Tokarev
It looks like smbd always logs to /var/log/samba/log.$progname even if config file specifies different logfile -- when it needs to log something before completing reading the config file. But if it can't open it for writing, it fails and exits. Tell smbd to use our temp dir as logbase (-l option) to avoid that. The same option is used by samba3 and samba4, so there should be no incompatible changes. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
2014-09-04Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell
staging Net patches # gpg: Signature made Thu 04 Sep 2014 17:32:44 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/net-pull-request: virtio-net: purge outstanding packets when starting vhost net: complete all queued packets on VM stop net: invoke callback when purging queue virtio: don't call device on !vm_running virtio-net: don't run bh on vm stopped net: Forbid dealing with packets when VM is not running Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-04net: complete all queued packets on VM stopMichael S. Tsirkin
This completes all packets, ensuring that callbacks will not run when VM is stopped. Cc: qemu-stable@nongnu.org Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04net: invoke callback when purging queueMichael S. Tsirkin
devices rely on packet callbacks eventually running, but we violate this rule whenever we purge the queue. To fix, invoke callbacks on all packets on purge. Set length to 0, this way callers can detect that this happened and re-queue if necessary. Cc: qemu-stable@nongnu.org Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04net: Forbid dealing with packets when VM is not runningzhanghailiang
For all NICs(except virtio-net) emulated by qemu, Such as e1000, rtl8139, pcnet and ne2k_pci, Qemu can still receive packets when VM is not running. If this happened in *migration's* last PAUSE VM stage, but before the end of the migration, the new receiving packets will possibly dirty parts of RAM which has been cached in *iovec*(will be sent asynchronously) and dirty parts of new RAM which will be missed. This will lead serious network fault in VM. To avoid this, we forbid receiving packets in generic net code when VM is not running. Bug reproduction steps: (1) Start a VM which configured at least one NIC (2) In VM, open several Terminal and do *Ping IP -i 0.1* (3) Migrate the VM repeatedly between two Hosts And the *PING* command in VM will very likely fail with message: 'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you run 'service network restart' Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-02slirp: Honour vlan/stack in hostfwd_remove commandsPeter Maydell
The hostfwd_add and hostfwd_remove monitor commands allow the user to optionally specify a vlan/stack tuple. hostfwd_add honours this, but hostfwd_remove does not (it looks up the tuple but then ignores the SlirpState it has looked up and always uses the first stack in the list anyway). Correct this to honour what the user requested. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>