| Age | Commit message (Collapse) | Author |
|---|
|
For better debuggability and observability.
Message-Id: <1707910082-10243-10-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For better debuggability and observability.
Message-Id: <1707910082-10243-9-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For better debuggability and observability.
Message-Id: <1707910082-10243-6-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When enabled the virtio-net-pci, guest network packet will
load the vnet_hdr. In COLO status, the primary VM's network
packet maybe redirect to another VM, it needs filter-redirect
enable the vnet_hdr flag at the same time, COLO-proxy will
correctly parse the original network packet. If have any
misconfiguration here, the vnet_hdr_len is wrong for parse
the packet, the data+offset will point to wrong place.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
When COLO use only one vnet_hdr_support parameter between
filter-redirector and filter-mirror(or colo-compare), COLO will crash
with segmentation fault. Back track as follow:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555cb200b in eth_get_l2_hdr_length (p=0x0)
at /home/tao/project/COLO/colo-qemu/include/net/eth.h:296
296 uint16_t proto = be16_to_cpu(PKT_GET_ETH_HDR(p)->h_proto);
(gdb) bt
0 0x0000555555cb200b in eth_get_l2_hdr_length (p=0x0)
at /home/tao/project/COLO/colo-qemu/include/net/eth.h:296
1 0x0000555555cb22b4 in parse_packet_early (pkt=0x555556a44840) at
net/colo.c:49
2 0x0000555555cb2b91 in is_tcp_packet (pkt=0x555556a44840) at
net/filter-rewriter.c:63
So wrong vnet_hdr_len will cause pkt->data become NULL. Add check to
raise error and add trace-events to track vnet_hdr_len.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Build of QEMU with dtrace fails on macOS:
LINK x86_64-softmmu/qemu-system-x86_64
error: probe colo_compare_miscompare doesn't exist
error: Could not register probes
ld: error creating dtrace DOF section for architecture x86_64
The reason of the error is explained by Adam Leventhal [1]:
Note that is-enabled probes don't have the stability magic so I'm not
sure how things would work if only is-enabled probes were used.
net/colo code uses is-enabled probes to determine if other probes should
be used but colo_compare_miscompare itself is not used explicitly.
Linker doesn't include the symbol and build fails.
The issue can be resolved if is-enabled probe matches the actual trace
point that is used inside the test. Packet dump toggle is replaced with
a compile-time conditional definition.
1. http://markmail.org/message/6grq2ygr5nwdwsnb
Fixes: f4b618360e ("colo-compare: add TCP, UDP, ICMP packet comparison")
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-id: 20200717093517.73397-5-r.bolshakov@yadro.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The patch is to fix the "pkt" memory leak in packet_enqueue().
The allocated "pkt" needs to be freed if the colo compare
primary or secondary queue is too big.
Replace the error_report of full queue with a trace event.
Signed-off-by: Derek Su <dereksu@qnap.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.
Some of our formats have trailing newlines, remove them.
[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Previously there was a single instance of the timer used by
monitor triggered announces, that's OK, but when combined with the
previous change that lets you have announces for subsets of interfaces
it's a bit restrictive if you want to do different things to different
interfaces.
Add an 'id' field to the announce, and maintain a list of the
timers based on id.
This allows you to for example:
a) Start an announce going on interface eth0 for a long time
b) Start an announce going on interface eth1 for a long time
c) Kill the announce on eth0 while leaving eth1 going.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Allow the caller to restrict the set of interfaces that announces are
sent on. The default is still to send on all interfaces.
e.g.
{ "execute": "announce-self", "arguments": { "initial": 50, "max": 550, "rounds": 5, "step": 50, "interfaces": ["vn2", "vn1"] } }
This doesn't affect the behaviour of migraiton announcments.
Note: There's still only one timer for the qmp command, so that
performing an 'announce-self' on one list of interfaces followed
by another 'announce-self' on another list will stop the announces
on the existing set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Switch the announcements to using the new announce timer.
Move the code that does it to announce.c rather than savevm
because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all
in the main thread/bql, and so there's never any racing with
the timers themselves.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Packet size some time different or when network is busy.
Based on same payload size, but TCP protocol can not
guarantee send the same one packet in the same way,
like that:
We send this payload:
------------------------------
| header |1|2|3|4|5|6|7|8|9|0|
------------------------------
primary:
ppkt1:
----------------
| header |1|2|3|
----------------
ppkt2:
------------------------
| header |4|5|6|7|8|9|0|
------------------------
secondary:
spkt1:
------------------------------
| header |1|2|3|4|5|6|7|8|9|0|
------------------------------
In the original method, ppkt1 and ppkt2 are different in size and
spkt1, so they can't compare and trigger the checkpoint.
I have tested FTP get 200M and 1G file many times, I found that
the performance was less than 1% of the native.
Now I reconstructed the comparison of TCP packets based on the
TCP sequence number. first of all, ppkt1 and spkt1 have the same
starting sequence number, so they can compare, even though their
length is different. And then ppkt1 with a smaller payload length
is used as the comparison length, if the payload is same, send
out the ppkt1 and record the offset(the length of ppkt1 payload)
in spkt1. The next comparison, ppkt2 and spkt1 can be compared
from the recorded position of spkt1.
like that:
----------------
| header |1|2|3| ppkt1
---------|-----|
| |
---------v-----v--------------
| header |1|2|3|4|5|6|7|8|9|0| spkt1
---------------|\------------|
| \offset |
---------v-------------v
| header |4|5|6|7|8|9|0| ppkt2
------------------------
In this way, the performance can reach native 20% in my multiple
tests.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Tested-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Because of previous patch's trace arguments over the limit
of UST backend, so I rewrite the patch.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This reverts commit 0fc8aec7de64f2bf83a274a2a38b938ce03425d2.
In commit 2dfe5113b11 we split a trace event with a lot of arguments
in two, because the UST trace backend has a limit on the number
of arguments you can have in a single trace event. Unfortunately
we subsequently forgot about this, and in commit 0fc8aec7de64f2
we merged the two trace events again, recreating the "UST backend
doesn't build" bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Optimize two trace events as one, adjust print format make
it easy to read. rename trace_colo_compare_pkt_info_src/dst
to trace_colo_compare_tcp_info.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
It seems there is a limit to the number of arguments a UST trace event
can take and at 11 the previous trace command broke the build. Split the
trace into a src pkt and dst pkt trace to fix this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20161028132559.8324-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fix memory leak in colo-compare.c and filter-rewriter.c
Report by Coverity and add some comments.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.
commit 30656b097e9dd7978d3fe9416cb9f5a421a9e63e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:34 2016 +0800
filter-rewriter: rewrite tcp packet to keep secondary connection
commit f4b618360e5a81b097e2e35d52011bec3c63af68
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:31 2016 +0800
colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
commit 0682e15b19b2f41c0568142b42518b9471168597
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:30 2016 +0800
colo-compare: introduce packet comparison thread
commit 59509ec16b7ee92b3f8261c554023aa1d3169317
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:27 2016 +0800
net/colo.c: add colo.c to define and handle packet
This moves all events into net/trace-events where they
were supposed to live.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Documentation is docs/tracing.txt instead of docs/trace-events.txt.
find . -name trace-events -exec \
sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
{} \;
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Move all trace-events for files in the net/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-36-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
