Age | Commit message (Collapse) | Author |
|
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for net-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-18-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost: enable vhost without without MSI-X
pci: Don't register a specialized 'config_write' if default behavior is intended
hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
vhost_net: re-enable when cross endian
vhost-net: tell tap backend about the vnet endianness
tap: fix non-linux build
tap: add VNET_LE/VNET_BE operations
vhost: set vring endianness for legacy virtio
virtio: introduce virtio_legacy_is_cross_endian()
linux-headers: sync vhost.h
vhost-user: part of virtio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We use vhostforce to enable vhost even if Guests don't have MSI-X
support and we fall back to QEMU virtio-net.
This gives a very small performance gain, but the disadvantage
is that guest now controls which virtio code is running
(qemu or vhost) so our attack surface is doubled.
This patch will enable vhost unconditionally whenever it's requested.
For compatibility, enable vhost when vhostforce is set, as well.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
The linux tap and macvtap backends can be told to parse vnet headers
according to little or big endian. This is done through the TUNSETVNETLE
and TUNSETVNETBE ioctls.
This patch brings all the plumbing for QEMU to use these APIs.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Done with following Coccinelle semantic patch, plus manual cosmetic changes in
net/*.c.
@@
expression E1, E2, E3, E4;
@@
- qemu_set_fd_handler2(E1, NULL, E2, E3, E4);
+ qemu_set_fd_handler(E1, E2, E3, E4);
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.
This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-7-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When -netdev tap fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -netdev tap,id=foo
qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted
qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized
With the command line, the messages go to stderr. In HMP, they go to
the monitor. In QMP, the second one becomes the error reply, and the
first one goes to stderr.
Convert net_init_tap() to Error. This suppresses the unwanted second
message, and makes the specific error the QMP error reply.
[Dropped duplicate "and" from error message as suggested by Eric Blake:
"ifname=, script=, downscript=, and vnet_hdr=, "
"queues=, and vhostfds= are invalid with helper="
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Convert the trivial ones immediately: tap-aix and tap-haiku.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fixes inappropriate use of stderr in monitor command handler.
While there, improve the messages some.
[Fixed Error **err -> Error *err local variable that broke the build.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-10-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
[Dropped %s from "tap: open vhost char device failed: %s" since
error_setg_errno() already prints a human-readable error string and
there is no format string argument.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-9-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When -netdev bridge fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -netdev bridge,id=foo
failed to launch bridge helper
qemu-system-x86_64: -netdev bridge,id=foo: Device 'bridge' could not be initialized
The first message goes to stderr. Wrong for HMP, because errors need
to go to the monitor there.
The second message goes to stderr for -netdev, to the monitor for HMP
netdev_add, and becomes the error reply for QMP netdev_add.
Convert net_bridge_run_helper() to Error, and propagate its errors
through net_init_bridge(). This ensures the error gets reported where
the user is, and suppresses the unwanted second message.
While there, improve the error messages a bit.
The above example becomes:
$ qemu-system-x86_64 -netdev bridge,id=foo
qemu-system-x86_64: -netdev bridge,id=foo: bridge helper failed
net_init_tap() also uses net_bridge_run_helper(). Propagate its
errors there as well. Improves reporting these errors with -netdev
tap & friends.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-7-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-6-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Error reporting for netdev_add is broken: the net_client_init_fun[]
report the actual errors with (at best) error_report(), and their
caller net_client_init1() makes up a generic error on top.
For command line and HMP, this produces an mildly ugly error cascade.
In QMP, the actual errors go to stderr, and the generic error becomes
the command's error reply.
To fix this, we need to convert the net_client_init_fun[] to Error.
To permit fixing them one by one, add an Error ** parameter to the
net_client_init_fun[]. If the call fails without returning an Error,
make up the same generic Error as before. But if it returns one, use
that instead. Since none of them does so far, no functional change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
monitor_handle_fd_param() is a wrapper around
monitor_handle_fd_param2() that feeds errors to qerror_report_err()
instead of returning them. qerror_report_err() is inappropriate in
many contexts. monitor_handle_fd_param() looks simpler than
monitor_handle_fd_param2(), which tempts use. Remove the temptation:
drop the wrapper and open-code the (trivial) error handling instead.
Replace the open-coded qerror_report_err() by error_report_err() in
places that already use error_report(). Turns out that's everywhere.
While there, rename monitor_handle_fd_param2() to monitor_fd_param().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
[Adjusted doc comment for grammar.
--Stefan]
Signed-off-by: Wangkai <wangkai86@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
In hotplugging scenario, taking those true branch, the file
handler do not be closed. Let's close them before return.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
commit 5193e5fb (tap: factor out common tap initialization)
introduce net_init_tap_one(). But it's inappropriate that
we close fd in net_init_tap_one(), we should lay it in the
caller, becuase some callers needn't to close it if we get
the fd by monitor_handle_fd_param().
On the other hand, in other exceptional branches fd isn't
closed, so that's incomplete anyway.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Avoid iterations for fd 0, 1 & 2 when we are closing file fds in child process.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The net subsystem has a control flow mechanism so peer NetClientStates
can tell each other to stop sending packets. This is used to stop
monitoring the tap file descriptor for incoming packets if the guest rx
ring has no spare buffers.
There is a corner case when tap_can_send() is true at the beginning of
an event loop iteration but becomes false before the tap_send() fd
handler is invoked.
tap_send() will read the packet from the tap file descriptor and attempt
to send it. The net queue will hold on to the packet and return 0,
indicating that further I/O is not possible. tap then stops monitoring
the file descriptor for reads.
This is unlike the normal case where tap_can_send() is the same before
and during the event loop iteration. The event loop would simply not
monitor the file descriptor if tap_can_send() returns true. Upon next
iteration it would check tap_can_send() again and begin monitoring if we
can send.
The deadlock happens because tap_send() explicitly disabled read_poll.
This is done with the expectation that the peer will call
qemu_net_queue_flush(). But hw/net/virtio-net.c does not monitor
vm_running transitions and issue the flush. Hence we're left with a
broken tap device.
Cc: qemu-stable@nongnu.org
Reported-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Since TAP offloadings are manipulated through a new API, it's
not necessary to export them in include/net/tap.h anymore.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The TAP NetClientInfo structure is inizialized with the TAP-specific
functions that manipulates offloading features.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used
to return int, even though they only return true/false values.
This patch changes the prototypes to return bool.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This patch forbid the following invalid parameters to tap:
1) fd and vhostfds were specified but vhostfd were not specified
2) vhostfds were specified but fds were not specified
3) fds and vhostfd were specified
For 1 and 2, net_init_tap_one() will still pass NULL as vhostfdname to
monitor_handle_fd_param(), which may crash the qemu.
Also remove the unnecessary has_fd check.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <shajnocz@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Only tap->vhostfd were checked net_init_tap_one(), but tap->vhostfds were
forgot, this will lead qemu to ignore all fds passed by management through
vhostfds, and tries to create vhost_net device itself. Fix by adding this check
also.
Reportyed-by: Michal Privoznik <mprivozn@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this
up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty
of room for the ethernet and virtio_net headers.
Originally, ran into this limitation when using -netdev UDP sockets to connect
VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net
NIC model). Test is simple: ping -M do -s 8500 <target>. This test will
attempt to ping with unfragmented packet of given size. Without patch, size
is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt
size up to 9000 (again, minus protocol hdrs).
v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply
to vde and socket netdevs.
v1: increase buf size to 12K just for -netdev UDP sockets
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Obviously, hub does not support multiqueue tap. So this patch forbids creating
multiple queue tap when hub is used to prevent the crash when command line such
as "-net tap,queues=2" is used.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The multiqueue patch series broke -netdev tap,fd=X which manifests
as libvirt not being able to start a guest. This was because it
passed NULL for the netdev name which results in an anonymous netdev
device regardless of what the user specified.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.
The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.
Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.
A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch introduce a new bit - enabled in TAPState which tracks whether a
specific queue/fd is enabled. The tap/fd is enabled during initialization and
could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform
specific helpers to do the real work. Polling of a tap fd can only done when
the tap was enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch factors out the common initialization of tap into a new helper
net_init_tap_one(). This will be used by multiqueue tap patches.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed. Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Touching char/char.h basically causes the whole of QEMU to
be rebuilt. Avoid this, it is usually unnecessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For tap, we currently assume the vnet header size is 10
(the default value) but that might not be the case
if tap is persistent and has been used by qemu previously.
To fix, set host header size in tap device on open.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This patch doesn't seem much useful alone, I must admit. However,
it makes sense as part of the upcoming directory reorganization,
where I want to have include/net/tap.h as the net<->hw interface
for tap. Then having both net/tap.h and include/net/tap.h does
not work. "Fixed" by moving all the init functions to a single
header file net/clients.h.
The patch also adopts a uniform style for including net/*.h files
from net/*.c, without the net/ path.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
|
|
This patch renames+moves the net_handle_fd_param() caller used to
obtain a file descriptor from either qemu_parse_fd() (the normal case)
or from monitor_get_fd() (migration case) into a generically prefixed
monitor_handle_fd_param() to be used by vhost-scsi code.
Also update net/[socket,tap].c consumers to use the new prefix.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The vlan feature is no longer part of net core. Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.
This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Since hubs are now used to implement the 'vlan' feature and the vlan
argument is always NULL, remove the argument entirely and update all net
clients that use qemu_new_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Stop using the special-case vlan code in net.c. Instead use the hub net
client to implement the vlan feature. The next patch will remove vlan
code from net.c completely.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
v1->v2:
- unchanged
v2->v3:
- keep "qemu-option.h" included in "net/slirp.h"
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|