aboutsummaryrefslogtreecommitdiff
path: root/net/tap.c
AgeCommit message (Collapse)Author
2021-09-04vhost_net: do not assume nvqs is always 2Jason Wang
This patch switches to initialize dev.nvqs from the VhostNetOptions instead of assuming it was 2. This is useful for implementing control virtqueue support which will be a single vhost_net structure with a single cvq. Note that nvqs is still set to 2 for all users and this patch does not change functionality. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20210903091031.47303-6-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-06-04net: Added SetSteeringEBPF method for NetClientState.Andrew Melnychenko
For now, that method supported only by Linux TAP. Linux TAP uses TUNSETSTEERINGEBPF ioctl. Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-23net: check the existence of peer before trying to padJason Wang
There could be case that peer is NULL. This can happen when during network device hot-add where net device needs to be added first. So the patch check the existence of peer before trying to do the pad. Fixes: 969e50b61a285 ("net: Pad short frames to minimum size before sending from SLiRP/TAP") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Message-id: 20210423031803.1479-1-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-08Revert "qapi: net: Add query-netdev command"Jason Wang
Several issues has been reported for query-netdev series. Consider it's late in the rc, this reverts commit d32ad10a14d46dfe9304e3ed5858a11dcd5c71a0. Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-08Revert "net: Move NetClientState.info_str to dynamic allocations"Jason Wang
Several issues has been reported for query-netdev info series. Consider it's late in the rc, this reverts commit commit 59b5437eb732d6b103a9bc279c3482c834d1eff9. Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-08Revert "net: Do not fill legacy info_str for backends"Jason Wang
Several issues has been reported for query-netdev info series. Consider it's late in the rc, this reverts commit f2e8319d456724c3d8514d943dc4607e2f08e88a. Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-22net: Pad short frames to minimum size before sending from SLiRP/TAPBin Meng
The minimum Ethernet frame length is 60 bytes. For short frames with smaller length like ARP packets (only 42 bytes), on a real world NIC it can choose either padding its length to the minimum required 60 bytes, or sending it out directly to the wire. Such behavior can be hardcoded or controled by a register bit. Similarly on the receive path, NICs can choose either dropping such short frames directly or handing them over to software to handle. On the other hand, for the network backends like SLiRP/TAP, they don't expose a way to control the short frame behavior. As of today they just send/receive data from/to the other end connected to them, which means any sized packet is acceptable. So they can send and receive short frames without any problem. It is observed that ARP packets sent from SLiRP/TAP are 42 bytes, and SLiRP/TAP just send these ARP packets to the other end which might be a NIC model that does not allow short frames to pass through. To provide better compatibility, for packets sent from QEMU network backends like SLiRP/TAP, we change to pad short frames before sending it out to the other end, if the other end does not forbid it via the nc->do_not_pad flag. This ensures a backend as an Ethernet sender does not violate the spec. But with this change, the behavior of dropping short frames from SLiRP/TAP interfaces in the NIC model cannot be emulated because it always receives a packet that is spec complaint. The capability of sending short frames from NIC models is still supported and short frames can still pass through SLiRP/TAP. This commit should be able to fix the issue as reported with some NIC models before, that ARP requests get dropped, preventing the guest from becoming visible on the network. It was workarounded in these NIC models on the receive path, that when a short frame is received, it is padded up to 60 bytes. The following 2 commits seem to be the one to workaround this issue in e1000 and vmxenet3 before, and should probably be reverted. commit 78aeb23eded2 ("e1000: Pad short frames to minimum size (60 bytes)") commit 40a87c6c9b11 ("vmxnet3: Pad short frames to minimum size (60 bytes)") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15net: Do not fill legacy info_str for backendsAlexey Kirillov
As we use QAPI NetClientState->stored_config to store and get information about backend network devices, we can drop fill of legacy field info_str for them. We still use info_str field for NIC and hubports, so we can not completely remove it. Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15net: Move NetClientState.info_str to dynamic allocationsAlexey Kirillov
The info_str field of the NetClientState structure is static and has a size of 256 bytes. This amount is often unclaimed, and the field itself is used exclusively for HMP "info network". The patch translates info_str to dynamic memory allocation. This action is also allows us to painlessly discard usage of this field for backend devices. Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15qapi: net: Add query-netdev commandAlexey Kirillov
The query-netdev command is used to get the configuration of the current network device backends (netdevs). This is the QMP analog of the HMP command "info network" but only for netdevs (i.e. excluding NIC and hubports). The query-netdev command returns an array of objects of the NetdevInfo type, which are an extension of Netdev type. It means that response can be used for netdev-add after small modification. This can be useful for recreate the same netdev configuration. Information about the network device is filled in when it is created or modified and is available through the NetClientState->stored_config. Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-24net: Use correct default-path macro for downscriptKeqian Zhu
Fixes: 63c4db4c2e6d (net: relocate paths to helpers and scripts) Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-24tap: fix a memory leakyuanjungong
Close fd before returning. Buglink: https://bugs.launchpad.net/qemu/+bug/1904486 Signed-off-by: yuanjungong <ruc_gongyuanjun@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-10-09monitor: Use getter/setter functions for cur_monKevin Wolf
cur_mon really needs to be coroutine-local as soon as we move monitor command handlers to coroutines and let them yield. As a first step, just remove all direct accesses to cur_mon so that we can implement this in the getter function later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-4-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-30net: relocate paths to helpers and scriptsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-15net: detect errors from probing vnet hdr flag for TAP devicesDaniel P. Berrange
When QEMU sets up a tap based network device backend, it mostly ignores errors reported from various ioctl() calls it makes, assuming the TAP file descriptor is valid. This assumption can easily be violated when the user is passing in a pre-opened file descriptor. At best, the ioctls may fail with a -EBADF, but if the user passes in a bogus FD number that happens to clash with a FD number that QEMU has opened internally for another reason, a wide variety of errnos may result, as the TUNGETIFF ioctl number may map to a completely different command on a different type of file. By ignoring all these errors, QEMU sets up a zombie network backend that will never pass any data. Even worse, when QEMU shuts down, or that network backend is hot-removed, it will close this bogus file descriptor, which could belong to another QEMU device backend. There's no obvious guaranteed reliable way to detect that a FD genuinely is a TAP device, as opposed to a UNIX socket, or pipe, or something else. Checking the errno from probing vnet hdr flag though, does catch the big common cases. ie calling TUNGETIFF will return EBADF for an invalid FD, and ENOTTY when FD is a UNIX socket, or pipe which catches accidental collisions with FDs used for stdio, or monitor socket. Previously the example below where bogus fd 9 collides with the FD used for the chardev saw: $ ./x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hostnet0,fd=9 \ -chardev socket,id=charchannel0,path=/tmp/qga,server,nowait \ -monitor stdio -vnc :0 qemu-system-x86_64: -netdev tap,id=hostnet0,fd=9: TUNGETIFF ioctl() failed: Inappropriate ioctl for device TUNSETOFFLOAD ioctl() failed: Bad address QEMU 2.9.1 monitor - type 'help' for more information (qemu) Warning: netdev hostnet0 has no peer which gives a running QEMU with a zombie network backend. With this change applied we get an error message and QEMU immediately exits before carrying on and making a bigger disaster: $ ./x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hostnet0,fd=9 \ -chardev socket,id=charchannel0,path=/tmp/qga,server,nowait \ -monitor stdio -vnc :0 qemu-system-x86_64: -netdev tap,id=hostnet0,vhost=on,fd=9: Unable to query TUNGETIFF on FD 9: Inappropriate ioctl for device Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20171027085548.3472-1-berrange@redhat.com [lv: to simplify, don't check on EINVAL with TUNGETIFF as it exists since v2.6.27] Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-07-15net: check if the file descriptor is valid before using itLaurent Vivier
qemu_set_nonblock() checks that the file descriptor can be used and, if not, crashes QEMU. An assert() is used for that. The use of assert() is used to detect programming error and the coredump will allow to debug the problem. But in the case of the tap device, this assert() can be triggered by a misconfiguration by the user. At startup, it's not a real problem, but it can also happen during the hot-plug of a new device, and here it's a problem because we can crash a perfectly healthy system. For instance: # ip link add link virbr0 name macvtap0 type macvtap mode bridge # ip link set macvtap0 up # TAP=/dev/tap$(ip -o link show macvtap0 | cut -d: -f1) # qemu-system-x86_64 -machine q35 -device pcie-root-port,id=pcie-root-port-0 -monitor stdio 9<> $TAP (qemu) netdev_add type=tap,id=hostnet0,vhost=on,fd=9 (qemu) device_add driver=virtio-net-pci,netdev=hostnet0,id=net0,bus=pcie-root-port-0 (qemu) device_del net0 (qemu) netdev_del hostnet0 (qemu) netdev_add type=tap,id=hostnet1,vhost=on,fd=9 qemu-system-x86_64: .../util/oslib-posix.c:247: qemu_set_nonblock: Assertion `f != -1' failed. Aborted (core dumped) To avoid that, add a function, qemu_try_set_nonblock(), that allows to report the problem without crashing. In the same way, we also update the function for vhostfd in net_init_tap_one() and for fd in net_init_socket() (both descriptors are provided by the user and can be wrong). Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 2Markus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. The previous commit did that with a Coccinelle script I consider fairly trustworthy. This commit uses the same script with the matching of return taken out, i.e. we convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... } to if (!foo(..., errp)) { ... ... } This is unsound: @err could still be read between afterwards. I don't know how to express "no read of @err without an intervening write" in Coccinelle. Instead, I manually double-checked for uses of @err. Suboptimal line breaks tweaked manually. qdev_realize() simplified further to placate scripts/checkpatch.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-36-armbru@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-06-18tap: allow extended virtio header with hash infoYuri Benditovich
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-29net: tap: replace snprintf with g_strdup_printf callsPrasad J Pandit
When invoking qemu-bridge-helper in 'net_bridge_run_helper', instead of using fixed sized buffers, use dynamically allocated ones initialised and returned by g_strdup_printf(). Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-03-29net: tap: use qemu_set_nonblockLi Qiang
The fcntl will change the flags directly, use qemu_set_nonblock() instead. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-07-20tap: fix memory leak on success to create a tap deviceYunjian Wang
The memory leak on success to create a tap device. And the nfds and nvhosts may not be the same and need to be processed separately. Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device") Fixes: 264986e2 ("tap: multiqueue support") Cc: qemu-stable@nongnu.org Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-06-15tap: set vhostfd passed from qemu cli to non-blockingBrijesh Singh
A guest boot hangs while probing the network interface when iommu_platform=on is used. The following qemu cli hangs without this patch: # $QEMU \ -netdev tap,fd=3,id=hostnet0,vhost=on,vhostfd=4 3<>/dev/tap67 4<>/dev/host-net \ -device virtio-net-pci,netdev=hostnet0,id=net0,iommu_platform=on,disable-legacy=on \ ... Commit: c471ad0e9bd46 (vhost_net: device IOTLB support) took care of setting vhostfd to non-blocking when QEMU opens /dev/host-net but if the fd is passed from qemu cli then we need to ensure that fd is set to non-blocking. Fixes: c471ad0e9bd46 ("vhost_net: device IOTLB support") Cc: qemu-stable@nongnu.org Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-05-14net: Get rid of 'vlan' terminology and use 'hub' instead in the source filesThomas Huth
'vlan' is very confusing since it does not mean something like IEEE 802.1Q, but rather emulated hubs, so let's switch to that terminology instead. Buglink: https://bugs.launchpad.net/qemu/+bug/658904 Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05tap: setting error appropriately when calling net_init_tap_one()Jay Zhou
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(), the followed up device_add virtio-net-pci,netdev=net0 will fail too, prints: TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD ioctl() failed: Bad file descriptor The reason is that the fd of tap is closed when error occured after calling net_init_tap_one(). The fd should be closed when calling net_init_tap_one failed: - if tap_set_sndbuf() failed - if tap_set_sndbuf() succeeded but vhost failed to open or initialize with vhostforce flag on - with wrong vhost command line parameter The fd should not be closed just because vhost failed to open or initialize but without vhostforce flag. So the followed up device_add can fall back to userspace virtio successfully. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-20Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri 20 Jan 2017 02:58:57 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap: fix memory leak on failure in net_init_tap() hw/pci: use-after-free in pci_nic_init_nofail when nic device fails to initialize hw/net/dp8393x: Avoid unintentional sign extensions on addresses m68k: QOMify the MCF Fast Ethernet Controller device net: optimize checksum computation docs: Fix description of the sentence Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20tap: fix memory leak on failure in net_init_tap()Peter Maydell
Commit 091a6b2ac fixed most of the memory leaks in failure paths in net_init_tap() reported by Coverity (CID 1356216), but missed one. Fix it by deferring the allocation of fds and vhost_fds until after the error check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-18vhost_net: device IOTLB supportJason Wang
This patches implements Device IOTLB support for vhost kernel. This is done through: 1) switch to use dma helpers when map/unmap vrings from vhost codes 2) introduce a set of VhostOps to: - setting up device IOTLB request callback - processing device IOTLB request - processing device IOTLB invalidation 2) kernel support for Device IOTLB API: - allow vhost-net to query the IOMMU IOTLB entry through eventfd - enable the ability for qemu to update a specified mapping of vhost - through ioctl. - enable the ability to invalidate a specified range of iova for the device IOTLB of vhost through ioctl. In x86/intel_iommu case this is triggered through iommu memory region notifier from device IOTLB invalidation descriptor processing routine. With all the above, kernel vhost_net can co-operate with userspace IOMMU. For vhost-user, the support could be easily done on top by implementing the VhostOps. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-27tap: Allow specifying a bridgeAlexey Kardashevskiy
The tap backend is already using qemu-bridge-helper to attach tap interface to a bridge but (unlike the bridge backend) it always uses the default bridge name - br0. This adds a "br" property support to the tap backend. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-29vhost-user: keep vhost_net after a disconnectionMarc-André Lureau
Many code paths assume get_vhost_net() returns non-null. Keep VhostUserState.vhost_net after a successful vhost_net_init(), instead of freeing it in vhost_net_cleanup(). VhostUserState.vhost_net is thus freed before after being recreated or on final vhost_user_cleanup() and there is no need to save the acked features. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-19' into ↵Peter Maydell
staging QAPI patches for 2016-07-19 # gpg: Signature made Tue 19 Jul 2016 19:35:27 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2016-07-19: net: Use correct type for bool flag qapi: Change Netdev into a flat union block: Simplify drive-mirror block: Simplify block_set_io_throttle qapi: Implement boxed types for commands/events qapi: Plumb in 'boxed' to qapi generator lower levels qapi-event: Simplify visit of non-implicit data qapi: Drop useless gen_err_check() qapi: Add type.is_empty() helper qapi: Hide tag_name data member of variants qapi: Special case c_name() for empty type qapi: Require all branches of flat union enum to be covered net: use Netdev instead of NetClientOptions in client init qapi: change QmpInputVisitor to QSLIST qapi: change QmpOutputVisitor to QSLIST Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-19qapi: Change Netdev into a flat unionEric Blake
This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19net: use Netdev instead of NetClientOptions in client initKővágó, Zoltán
This way we no longer need NetClientOptions and can convert Netdev into a flat union. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com> [rework net_client_init1() to pass Netdev by copying from NetdevLegacy, rather than merging the two types - which means that we still need NetClientOptions after all. Rebase to qapi changes. The bulk of the patch is mechanical, replacing 'opts' by 'netdev->opts', while net_client_init1() takes care of converting between legacy and modern types.] Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-18tap: fix memory leak on failure to create a multiqueue tap devicePaolo Bonzini
Reported by Coverity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-13tap: use an exit notifier to call down_scriptMarc-André Lureau
We would like to move back net_cleanup() at the end of main function, like it used to be until f30dbae63a46f23116715dff8d130c, but minimum tap cleanup is necessary regarless at exit() time. Use an exit notifier to call TAP down_script. If net_cleanup() is called first, then remove the exit notifier as it will become a dangling pointer otherwise. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20160711144847.16651-1-marcandre.lureau@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-07tap: vhost busy polling supportJason Wang
This patch add the capability of basic vhost net busy polling which is supported by recent kernel. User could configure the maximum number of us that could be spent on busy polling through a new property of tap "poll-us". Cc: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-05-25net/tap: Allocating Large sized arrays to heapZhou Jie
net_init_tap has a huge stack usage of 8192 bytes approx. Moving large arrays to heap to reduce stack usage. Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-08net: simplify net_init_tap_one logicPaolo Bonzini
net_init_tap_one receives in vhostfdname a fd name from vhostfd= or vhostfds=, or NULL if there is no vhostfd=/vhostfds=. It is simpler to just check vhostfdname, than it is to check for vhostfd= or vhostfds=. This also calms down Coverity, which otherwise thinks that monitor_fd_param could dereference a NULL vhostfdname. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04net: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
2015-11-02net: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for net-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-18-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-19Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pci fixes, enhancements Most notably this includes virtio cross-endian patches. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: vhost: enable vhost without without MSI-X pci: Don't register a specialized 'config_write' if default behavior is intended hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf() vhost_net: re-enable when cross endian vhost-net: tell tap backend about the vnet endianness tap: fix non-linux build tap: add VNET_LE/VNET_BE operations vhost: set vring endianness for legacy virtio virtio: introduce virtio_legacy_is_cross_endian() linux-headers: sync vhost.h vhost-user: part of virtio Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19vhost: enable vhost without without MSI-XPankaj Gupta
We use vhostforce to enable vhost even if Guests don't have MSI-X support and we fall back to QEMU virtio-net. This gives a very small performance gain, but the disadvantage is that guest now controls which virtio code is running (qemu or vhost) so our attack surface is doubled. This patch will enable vhost unconditionally whenever it's requested. For compatibility, enable vhost when vhostforce is set, as well. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-17tap: add VNET_LE/VNET_BE operationsGreg Kurz
The linux tap and macvtap backends can be told to parse vnet headers according to little or big endian. This is done through the TUNSETVNETLE and TUNSETVNETBE ioctls. This patch brings all the plumbing for QEMU to use these APIs. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-12Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handlerFam Zheng
Done with following Coccinelle semantic patch, plus manual cosmetic changes in net/*.c. @@ expression E1, E2, E3, E4; @@ - qemu_set_fd_handler2(E1, NULL, E2, E3, E4); + qemu_set_fd_handler(E1, E2, E3, E4); Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12tap: Drop tap_can_sendFam Zheng
This callback is called by main loop before polling s->fd, if it returns false, the fd will not be polled in this iteration. This is redundant with checks inside read callback. After this patch, the data will be sent to peer when it arrives. If the device can't receive, it will be queued to incoming_queue, and when the device status changes, this queue will be flushed. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-7-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Improve -netdev/netdev_add/-net/... tap error reportingMarkus Armbruster
When -netdev tap fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -netdev tap,id=foo qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized With the command line, the messages go to stderr. In HMP, they go to the monitor. In QMP, the second one becomes the error reply, and the first one goes to stderr. Convert net_init_tap() to Error. This suppresses the unwanted second message, and makes the specific error the QMP error reply. [Dropped duplicate "and" from error message as suggested by Eric Blake: "ifname=, script=, downscript=, and vnet_hdr=, " "queues=, and vhostfds= are invalid with helper=" --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 04:35:03 +0000