aboutsummaryrefslogtreecommitdiff
path: root/net/tap-bsd.c
AgeCommit message (Collapse)Author
2015-05-27tap-bsd: Convert tap_open() to ErrorMarkus Armbruster
Fixes inappropriate use of stderr in monitor command handler. While there, improve some of the messages a bit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Permit incremental conversion of tap_open() to ErrorMarkus Armbruster
Convert the trivial ones immediately: tap-aix and tap-haiku. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert tap_set_sndbuf() to ErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-01tap-bsd: implement a FreeBSD only version of tap_openRoger Pau Monne
The current behaviour of tap_open for BSD systems differ greatly from it's Linux counterpart. Since FreeBSD supports interface renaming and tap device cloning by opening /dev/tap, implement a FreeBSD specific version of tap_open that behaves like it's Linux counterpart. This is specially important for toolstacks that use Qemu (like Xen libxl), in order to have a unified behaviour across suported platforms. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06tap: Use numbered tap/tun devices on all *BSD OS'sBrad Smith
The following patch simplifies the *BSD tap/tun code and makes use of numbered tap/tun interfaces on all *BSD OS's. NetBSD has a patch in their pkgsrc tree to make use of this feature and DragonFly also supports this as well. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24net: support for bridged networking on Mac OS XAlasdair McLeay
tun tap can be implemented on Mac OS X using http://tuntaposx.sourceforge.net It behaves in the same way as FreeBSD/OpenBSD implementations, but Qemu needs a patch to use the OpenBS/FreeBSD code. As per the patch listed in this forum thread: http://forum.gns3.net/post17679.html#p17679 And also as used in the MacPorts installation: https://trac.macports.org/browser/trunk/dports/emulators/qemu/files/patch-net-tap-interface.diff Signed-off-by: Alasdair McLeay <alasdair.mcleay@me.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01tap: multiqueue supportJason Wang
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF for a signle device many times to create multiple file descriptors as independent queues. User could also enable/disabe a specific queue through TUNSETQUEUE. The patch adds the generic infrastructure to create multiqueue taps. To achieve this a new parameter "queues" were introduced to specify how many queues were expected to be created for tap by qemu itself. Alternatively, management could also pass multiple pre-created tap file descriptors separated with ':' through a new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file descriptors could also be passed in this way. Each TAPState were still associated to a tap fd, which mean multiple TAPStates were created when user needs multiqueue taps. Since each TAPState contains one NetClientState, with the multiqueue nic support, an N peers of NetClientState were built up. A new parameter, mq_required were introduce in tap_open() to create multiqueue tap fds. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: introduce a helper to get the name of an interfaceJason Wang
This patch introduces a helper tap_get_ifname() to get the device name of tap device. This is needed when ifname is unspecified in the command line and qemu were asked to create tap device by itself. In this situation, the name were allocated by kernel, so if multiqueue is asked, we need to fetch its name after creating the first queue. Only linux has this support since it's the only platform that supports multiqueue tap. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: add Linux multiqueue supportJason Wang
This patch add basic multiqueue support for Linux. When multiqueue is needed, we will first check whether kernel support multiqueue tap before creating more queues. Two new functions tap_fd_enable() and tap_fd_disable() were introduced to enable and disable a specific queue. Since the multiqueue is only supported in Linux, return error on other platforms. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-23convert net_init_tap() to NetClientOptionsLaszlo Ersek
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-06-09do not include <libutil.h> needlessly or if it doesn't existMichael Tokarev
<libutil.h> and <util.h> on *BSD (some have one, some another) were #included just for openpty() declaration. The only file where this function is actually used is qemu-char.c. In vl.c and net/tap-bsd.c, none of functions declared in libutil.h (login logout logwtmp timdomain openpty forkpty uu_lock realhostname fparseln and a few others depending on version) are used. Initially the code which is currently in qemu-char.c was in vl.c, it has been removed into separate file in commit 0e82f34d077dc2542 Fri Oct 31 18:44:40 2008, but the #includes were left in vl.c. So with vl.c, we just remove includes - libutil.h, util.h and pty.h (which declares only openpty() and forkpty()) from there. The code in net/tap-bsd.c, which come from net/tap.c, had this commit 5281d757efa6e40d74ce124be048b08d43887555 Author: Mark McLoughlin <markmc@redhat.com> Date: Thu Oct 22 17:49:07 2009 +0100 net: split all the tap code out into net/tap.c Note this commit not only moved stuff out of net.c to net/tap.c, but also rewrote large portions of the tap code, and added these completely unnecessary #includes -- as usual, I question why such a misleading commit messages are allowed. Again, no functions defined in libutil.h or util.h on *BSD are used by neither net/tap.c nor net/tap-bsd.c. Removing them. And finally, the only real user for these #includes, qemu-char.c, which actually uses openpty(). There, the #ifdef logic is wrong. A GLIBC-based system has <pty.h>, even if it is a variant of *BSD. So __GLIBC__ should be checked first, and instead of trying to include <libutil.h> or <util.h>, we include <pty.h>. If it is not GLIBC-based, we check for variations between <*util.h> as before. This patch fixes build of qemu 1.1 on Debian/kFreebsd (well, one of the two problems): it is a distribution with a FreeBSD kernel, so it #defines at least __FreeBSD_kernel__, but since it is based on GLIBC, it has <pty.h>, but current version does not have neither <util.h> nor <libutil.h>, which the code tries to include 3 times but uses only once. Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-07Fix network interface tap backendManuel Bouyer
Fix network interface tap backend work on NetBSD. It uses an ioctl to get the tap name. Signed-off-by: Christoph Egger<Christoph.Egger@amd.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-21Add support for OpenBSD to QEMU's tap driver.Brad
Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-29tap: Remove double include of util.hAndreas Färber
If neither of __FreeBSD__, __FreeBSD_kernel__ and __DragonFly__ is defined, util.h is included from tap-bsd.c. Don't include it again if __OpenBSD__ is defined. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-07tap: add APIs for vnet header lengthMichael S. Tsirkin
Add APIs to control host header length. First user will be vhost-net. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-27Fix BSD and win32 buildsBlue Swirl
CC net/tap-bsd.o /src/qemu/net/tap-bsd.c: In function `tap_open': /src/qemu/net/tap-bsd.c:93: warning: implicit declaration of function `error_report' CC sparc-softmmu/../net/tap-win32.o cc1: warnings being treated as errors /src/qemu/target-sparc/../net/tap-win32.c: In function 'net_init_tap': /src/qemu/target-sparc/../net/tap-win32.c:709: warning: implicit declaration of function 'error_report' Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2009-11-29Add support for GNU/kFreeBSDAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-21tap-bsd: handle ifname on FreeBSD hostsJuergen Lock
Handle ifname on FreeBSD hosts; if no ifname is given, always start the search from tap0. (Simplified/cleaned up version of what has been in the FreeBSD ports for a long time.) Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-21Fix tap breakage on BSD hosts (no IFF_VNET_HDR)Juergen Lock
net/tap-bsd.c was assuming IFF_VNET_HDR was always available, which I think isn't true on any BSD. Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-30Unbreak tap compilation on OS XAlexander Graf
Currently compiling the tap sources breaks on Mac OS X. This is because of: 1) tap-linux.h requiring Linux includes 2) typos 3) missing #includes This patch adds what's necessary to compile tap happily on Mac OS X. I haven't tested if using tap actually works, but I don't think that's a major issue as that code was probably seriously untested before already. I didn't split the patch, because it's only a few lines of code and splitting is probably not worth the effort here. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move UFO support detection to tap-linux.cMark McLoughlin
Only supported on Linux Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move tap_set_offload() code into tap-linux.cMark McLoughlin
TUNSETOFFLOAD is only available on Linux Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move tap_probe_vnet_hdr() to tap-linux.cMark McLoughlin
Only Linux has support for IFF_VNET_HDR Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move tap_set_sndbuf() to tap-linux.cMark McLoughlin
TUNSETSNDBUF is only available on linux Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: split BSD tap_open() out into net/tap-bsd.cMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 06:52:24 +0000