aboutsummaryrefslogtreecommitdiff
path: root/net.c
AgeCommit message (Collapse)Author
2012-06-04qapi: convert netdev_delLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04qapi: convert netdev_addLuiz Capitulino
This is not a full QAPI conversion, but an intermediate step. In essence, do_netdev_add() is split into three functions: 1. netdev_add(): performs the actual work. This function is fully converted to Error (thus, it's "qapi-friendly") 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is coded by hand and not auto-generated (gen=no in the schema). The reason for this it's a lot easier and simpler to with QemuOpts this way 3. hmp_netdev_add(): HMP front-end. This design was suggested by Paolo Bonzini. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04net: net_client_init(): use error_set()Luiz Capitulino
Callers are changed to use qerror_report_err() to keep their QError semantics. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04net: purge the monitor object from all init functionsLuiz Capitulino
The only backend that really uses it is the socket one, which calls monitor_get_fd(). But it can use 'cur_mon' instead. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04qemu-option: qemu_opts_from_qdict(): use error_set()Luiz Capitulino
do_device_add() and do_netdev_add() call qerror_report_err() to maintain their QError semantics. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04qemu-option: qemu_opts_validate(): use error_set()Luiz Capitulino
net_client_init() propagates the error up by calling qerror_report_err(), because its users expect QError semantics. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-03-16net: move compute_mcast_idx() to net.hJason Wang
Reduce duplicated codes. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-04w32: Fix build with new net bridge codeStefan Weil
Commit a7c36ee4920ea3acc227a0248dd161693f207357 added code for a net bridge and explicitly said that "this is very Linux centric". Indeed, compilation failed for w32, so the bridge code is now conditional. Hosts which don't support it can simply remove the definition of CONFIG_NET_BRIDGE. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-02-01Add support for net bridgeCorey Bryant
The most common use of -net tap is to connect a tap device to a bridge. This requires the use of a script and running qemu as root in order to allocate a tap device to pass to the script. This model is great for portability and flexibility but it's incredibly difficult to eliminate the need to run qemu as root. The only really viable mechanism is to use tunctl to create a tap device, attach it to a bridge as root, and then hand that tap device to qemu. The problem with this mechanism is that it requires administrator intervention whenever a user wants to create a guest. By essentially writing a helper that implements the most common qemu-ifup script that can be safely given cap_net_admin, we can dramatically simplify things for non-privileged users. We still support existing -net tap options as a mechanism for advanced users and backwards compatibility. Currently, this is very Linux centric but there's really no reason why it couldn't be extended for other Unixes. A typical invocation would be similar to one of the following: qemu linux.img -net bridge -net nic,model=virtio qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper" -net nic,model=virtio qemu linux.img -netdev bridge,id=hn0 -device virtio-net-pci,netdev=hn0,id=nic1 qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper",id=hn0 -device virtio-net-pci,netdev=hn0,id=nic1 The default bridge that we attach to is br0. The thinking is that a distro could preconfigure such an interface to allow out-of-the-box bridged networking. Alternatively, if a user wants to use a different bridge, a typical invocation would be simliar to one of the following: qemu linux.img -net bridge,br=qemubr0 -net nic,model=virtio qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0" -net nic,model=virtio qemu linux.img -netdev bridge,br=qemubr0,id=hn0 -device virtio-net-pci,netdev=hn0,id=nic1 qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0",id=hn0 -device virtio-net-pci,netdev=hn0,id=nic1 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com> Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-12Support for UDP unicast network backendBenjamin
Signed-off-by: Benjamin MARSILI <mlspirat42@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-06qapi: Convert set_linkLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-11-01Move filedescriptor parsing code from net.c into qemu_parse_fd()Stefan Berger
Move the parsing of a filedescriptor into a common function qemu_parse_fd() so others can use it as well. Have net.c call this function. v2: - moving qemu_parse_fd into cutils.c Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-04Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
2011-07-23net: Consistently use qemu_macaddr_default_if_unsetJan Kiszka
Drop the open-coded MAC assignment from net_init_nic and replace it with standard qemu_macaddr_default_if_unset which is also used by qdev. That avoid creating colliding MACs when instantiating NICs via different mechanisms. This change requires to store the MAC as MACAddr in NICInfo, and the remaining nd_table users need to be updated. Based on suggestion by Peter Maydell. CC: Markus Armbruster <armbru@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Dump client type 'info network'Jan Kiszka
Include the client type name into the output of 'info network'. The result looks like this: (qemu) info network VLAN 0 devices: rtl8139.0: type=nic,model=rtl8139,macaddr=52:54:00:12:34:57 Devices not on any VLAN: virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56 \ network1: type=tap,fd=5 CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Refactor net_client_typesJan Kiszka
Position entries of net_client_types according to the corresponding values of NET_CLIENT_TYPE_*. The array size is now defined by NET_CLIENT_TYPE_MAX. This will allow to obtain entries based on type value in later patches. At this chance rename NET_CLIENT_TYPE_SLIRP to NET_CLIENT_TYPE_USER for the sake of consistency. CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Improve layout of 'info network'Jan Kiszka
Improve the layout when listing non-vlan clients via 'info network'. The result looks like this: (qemu) info network Devices not on any VLAN: orphan: net=10.0.2.0, restricted=n virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:56 \ network2: fd=5 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 \ network1: net=10.0.2.0, restricted=n rtl8139.0: model=rtl8139,macaddr=52:54:00:12:34:58 ie. peers are grouped, orphans are listed as before. CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-19Fix netdev name lookup in -device, device_add, netdev_delMarkus Armbruster
qemu_find_netdev() looks up members of non_vlan_clients by name. It happily returns the first match. Trouble is the names need not be unique. non_vlan_clients contains host parts (netdevs) and guest parts (NICs). Netdevs have unique names: a netdev's name is a (mandatory) qemu_netdev_opts ID, and these are unique. NIC names are not unique. If a NIC has a qdev ID (which is unique), that's its name. Else, we make up a name. The made-up names are unique, but they can clash with qdev IDs. Even if NICs had unique names, they could still clash with netdev names. Callers of qemu_find_netdev(): * net_init_nic() wants a netdev. It happens to work because it runs before NICs get added to non_vlan_clients. * do_netdev_del() wants a netdev. If it gets a NIC, it complains and fails. Bug: a netdev with the same name that comes later in non_vlan_clients can't be deleted: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -netdev user,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=virtio1 [...] (qemu) netdev_add user,id=virtio1 (qemu) info network Devices not on any VLAN: hostnet0: net=10.0.2.0, restricted=n peer=virtio1 virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=hostnet0 virtio1: net=10.0.2.0, restricted=n (qemu) netdev_del virtio1 Device 'virtio1' not found * parse_netdev() wants a netdev. If it gets a NIC, it gets confused. With the test setup above: (qemu) device_add virtio-net-pci,netdev=virtio1 Property 'virtio-net-pci.netdev' can't take value 'virtio1', it's in use You can even connect two NICs to each other: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -device virtio-net-pci,id=virtio1 -device e1000,netdev=virtio1 [...] Devices not on any VLAN: virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=e1000.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 peer=virtio1 (qemu) q Segmentation fault (core dumped) * do_set_link() works fine for both netdevs and NICs. Whether it really makes sense for netdevs is debatable, but that's outside this patch's scope. Change qemu_find_netdev() to return only netdevs. This fixes the netdev_del and device_add/-device bugs demonstrated above. To avoid changing set_link, make do_set_link() search non_vlan_clients by hand instead of calling qemu_find_netdev(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19Fix automatically assigned network names for netdevMarkus Armbruster
If a network client doesn't have a name, we make one up, with assign_name(). assign_name() creates a name MODEL.NUM, where MODEL is the client's model, and NUM is the number of MODELs that already exist. Bug: it misses clients that are not on a VLAN, i.e. netdevs and the NICs using them: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -netdev user,id=hostnet0 -net nic,netdev=hostnet0 -netdev user,id=hostnet1 -net nic,netdev=hostnet1 QEMU 0.14.50 monitor - type 'help' for more information (qemu) info network Devices not on any VLAN: hostnet0: net=10.0.2.0, restricted=n peer=e1000.0 hostnet1: net=10.0.2.0, restricted=n peer=e1000.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=hostnet0 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 peer=hostnet1 Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-24Strip trailing '\n' from error_report()'s first argumentMarkus Armbruster
error_report() prepends location, and appends a newline. The message constructed from the arguments should not contain a newline. Fix the obvious offenders. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-22net: Warn about "-net nic" options which were ignoredPeter Maydell
Diagnose the case where the user asked for a NIC via "-net nic" but the board didn't instantiate that NIC (for example where the user asked for two NICs but the board only supports one). Note that this diagnostic doesn't apply to NICs created through -device, because those are always instantiated. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-22net: Don't warn about the default network setupPeter Maydell
Don't warn about the default network setup that you get if no command line -net options are specified. There are two cases that we would otherwise complain about: (1) board doesn't support a NIC but the implicit "-net nic" requested one (2) CONFIG_SLIRP not set, so the implicit "-net nic" sets up a nic that isn't connected to anything Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-22Revert "net: Improve the warnings for dubious command line option combinations"Peter Maydell
This reverts commit f68b9d672b90dedc79aeb9b44607f484dbe46a6b. That attempt at diagnosing unused -net nic options failed to account for NICs created via -device; back it out cleanly in preparation for implementing in a different manner. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-01net: Improve the warnings for dubious command line option combinationsPeter Maydell
Improve the warnings we give if the user specified a combination of -net options which don't make much sense: * Don't warn about anything if the config is the implicit default "-net user -net nic" rather than one specified by the user (this will only kick in for boards with no NIC or if CONFIG_SLIRP is not set) * Diagnose the case where the user asked for NICs which the board didn't instantiate (for example where the user asked for two NICs but the board only supports one) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01Fix net_check_clients warnings: make it per vlan.Tristan Gingold
Signed-off-by: Tristan Gingold <gingold@adacore.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06net: Add the missing option declaration of "vhostforce"Jason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06net: remove parse_host_src_port() functionJuan Quintela
It was deprecated, and it has no users. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06net: Use iov helper functionsBenjamin Poirier
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-05net: fix qemu_can_send_packet logicVincent Palatin
If any of the clients is not ready to receive (ie it has a can_receive callback and can_receive() returns false), we don't want to start sending, else this client may miss/discard the packet. I got this behaviour with the following setup : the emulated machine is using an USB-ethernet adapter, it is connected to the network using SLIRP and I'm dumping the traffic in a .pcap file. As per the following command line : -net nic,model=usb,vlan=1 -net user,vlan=1 -net dump,vlan=1,file=/tmp/pkt.pcap Every time that two packets are coming in a row from the host, the usb-net code will receive the first one, then returns 0 to can_receive call since it has a 1 packet long queue. But as the dump code is always ready to receive, qemu_can_send_packet will return true and the next packet will discard the previous one in the usb-net code. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20net: notify peer about link status changeMichael S. Tsirkin
qemu makes it possible to disable link at tap which is not communicated to the guest but causes all packets to be dropped. This works for virtio userspace, as qemu stops giving it packets, but not for virtio-net connected to vhost-net as that does not get notified about this change. Notify peer when this happens, which will then be used by the follow-up patch to stop/start vhost-net. Note: it might be a good idea to make peer link status match tap in this case, so the guest gets an event and updates the carrier state. For now stay bug for bug compatible with what we used to have in userspace. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: pradeep <psuriset@linux.vnet.ibm.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-09net/sock: option to specify local addressMike Ryan
Add an option to specify the host IP to send multicast packets from, when using a multicast socket for networking. The option takes an IP address and sets the IP_MULTICAST_IF socket option, which causes the packets to use that IP's interface as an egress. This is useful if the host machine has several interfaces with several virtual networks across disparate interfaces. Signed-off-by: Mike Ryan <mikeryan@ISI.EDU> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27net: properly handle illegal fd/vhostfd from command lineJason Wang
When hanlding fd/vhostfd form command line through net_handle_fd_param(), we need to check mon and return value of strtol() otherwise we could get segmentation fault or invalid fd when user type an illegal fd/vhostfd. This patch is based on the suggestions from Luiz Capitulino <lcapitulino@redhat.com>. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-06net: delay freeing peer host deviceMichael S. Tsirkin
With -netdev, virtio devices present offload features to guest, depending on the backend used. Thus, removing host netdev peer while guest is active leads to guest-visible inconsistency and/or crashes. As a solution, while guest (NIC) peer device exists, we prevent the host peer from being deleted. This patch does this by adding peer_deleted flag in nic state: if host device is going away while guest device is around, set this flag and keep a shell of the host device around for as long as guest device exists. The link is put down so all packets will get discarded. At the moment, management can detect that device deletion is delayed by doing info net. As a next step, we shall add commands that control hotplug/unplug without removing the device, and an event to report that guest has responded to the hotplug event. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-01net: delete QemuOpts when net_client_init() fails.Yoshiaki Tamura
This fixes the following scenario using QMP. First, put a bogus argument "foo" to "type", which results in an error. {"execute": "netdev_add", "arguments": { "type": "foo", "id": "netdev1" } } Then, call it again with correct argument "user". {"execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } This results in "DuplicatedId" error. Because the first command was invalid, it should be able to reuse the same "id", and the second command should work. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-06-30net: Fix VM start with '-net none'Amit Shah
Commit 50e32ea8f31035877decc10f1075aa0e619e09cb changed the behaviour for the return type of net_client_init() when a nic type with no init method was specified. 'none' is one such nic type. Instead of returning 0, which gets interpreted as an index into the nd_table[] array, we switched to returning -1, which signifies an error as well. That broke VM start with '-net none'. Testing was only done with the monitor command 'pci_add', which doesn't fail. The correct fix would still be to return 0+ values from net_client_init() only when the return value can be used as an index to refer to an entry in nd_table[]. With the current code, callers can erroneously poke into nd_table[0] when -net nic is used, which can lead to badness. However, this commit just returns to the previous behaviour before the offending commit. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-14Make netdev_del delete the netdev even when it's in useMarkus Armbruster
To hot-unplug guest and host part of a network device, you do: device_del NIC-ID netdev_del NETDEV-ID For PCI devices, device_del merely tells ACPI to unplug the device. The device goes away for real only after the guest processed the ACPI unplug event. You have to wait until then (e.g. by polling info pci) before you can unplug the netdev. Not good. Fix by removing the "in use" check from do_netdev_del(). Deleting a netdev while it's in use is safe; packets simply get routed to the bit bucket. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-10Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-06-09net: Fix hotplug with pci_addAmit Shah
The correct model type wasn't getting added when hotplugging nics with pci_add. Testcase: start VM with default nic type. In the qemu_monitor: (qemu) pci_add auto nic model=virtio This results in a nic hot-plug of the same nic type as the default. This was broken in 5294e2c774f120e10b44652ac143abda356f44eb Also changes the behaviour where no .init is defined for a net_client_type. Previously, 0 was returned, which indicated the init was successful and that 0 was the index into the nd_tables[] array. Return -1, indicating unsuccessful init, in such a case. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-01Monitor: Drop QMP documentation from codeLuiz Capitulino
Previous commit added QMP documentation to the qemu-monitor.hx file, it's is a copy of this information. While it's good to keep it near code, maintaining two copies of the same information is too hard and has little benefit as we don't expect client writers to consult the code to find how to use a QMP command. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-18monitor: Convert do_set_link() to QObject, QErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18monitor: Use argument type 'b' for set_linkMarkus Armbruster
Second argument is now "on" or "off" instead of "up" or "down". Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18monitor: New commands netdev_add, netdev_delMarkus Armbruster
Monitor commands to go with -netdev. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18error: Convert net_client_init() to QErrorMarkus Armbruster
The conversion is shallow: client type init() methods aren't converted. Converting them is a big job for relatively little practical benefit, so leave it for later. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18error: Drop extra messages after qemu_opts_set() and qemu_opts_parse()Markus Armbruster
Both functions report errors nicely enough now, no need for additional messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-10net: remove broken net_set_boot_mask() boot device validationEduardo Habkost
There are many problems with net_set_boot_mask(): 1) It is broken when using the device model instead of "-net nic". Example: $ qemu-system-x86_64 -device rtl8139,vlan=0,id=net0,mac=52:54:00:82:41:fd,bus=pci.0,addr=0x4 -net user,vlan=0,name=hostnet0 -vnc 0.0.0.0:0 -boot n Cannot boot from non-existent NIC $ 2) The mask was previously used to set which boot ROMs were supposed to be loaded, but this was changed long time ago. Now all ROM images are loaded, and SeaBIOS takes care of jumping to the right boot entry point depending on the boot settings. 3) Interpretation and validation of the boot parameter letters is done on the machine type code. Examples: PC accepts only a,b,c,d,n as valid boot device letters. mac99 accepts only a,b,c,d,e,f. As a side-effect of this change, qemu-kvm won't abort anymore if using "-boot n" on a machine with no network devices. Checking if the requested boot device is valid is now a task for the BIOS or the machine-type code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-10net: remove NICInfo.bootable fieldEduardo Habkost
It is just set by net_set_boot_mask() and never used. The logic for rom loading changed a lot since this field was introduced. It is not needed anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01tap: add vhost/vhostfd optionsMichael S. Tsirkin
This adds vhost binary option to tap, to enable vhost net accelerator. Default is off for now, we'll be able to make default on long term when we know it's stable. vhostfd option can be used by management, to pass in the fd. Assigning vhostfd implies vhost=on. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-26 07:32:42 +0000