| Age | Commit message (Collapse) | Author |
|---|
|
qemu makes it possible to disable link at tap which is not communicated
to the guest but causes all packets to be dropped.
This works for virtio userspace, as qemu stops giving it packets, but
not for virtio-net connected to vhost-net as that does not get notified
about this change.
Notify peer when this happens, which will then be used by the follow-up
patch to stop/start vhost-net.
Note: it might be a good idea to make peer link status match tap in this
case, so the guest gets an event and updates the carrier state. For now
stay bug for bug compatible with what we used to have in userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: pradeep <psuriset@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add an option to specify the host IP to send multicast packets from,
when using a multicast socket for networking. The option takes an IP
address and sets the IP_MULTICAST_IF socket option, which causes the
packets to use that IP's interface as an egress.
This is useful if the host machine has several interfaces with several
virtual networks across disparate interfaces.
Signed-off-by: Mike Ryan <mikeryan@ISI.EDU>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When hanlding fd/vhostfd form command line through net_handle_fd_param(),
we need to check mon and return value of strtol() otherwise we could
get segmentation fault or invalid fd when user type an illegal fd/vhostfd.
This patch is based on the suggestions from
Luiz Capitulino <lcapitulino@redhat.com>.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With -netdev, virtio devices present offload
features to guest, depending on the backend used.
Thus, removing host netdev peer while guest is
active leads to guest-visible inconsistency and/or crashes.
As a solution, while guest (NIC) peer device exists,
we prevent the host peer from being deleted.
This patch does this by adding peer_deleted flag in nic state:
if host device is going away while guest device
is around, set this flag and keep a shell of
the host device around for as long as guest device exists.
The link is put down so all packets will get discarded.
At the moment, management can detect that device deletion
is delayed by doing info net. As a next step, we shall add
commands that control hotplug/unplug without
removing the device, and an event to report that
guest has responded to the hotplug event.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This fixes the following scenario using QMP.
First, put a bogus argument "foo" to "type", which results in an error.
{"execute": "netdev_add", "arguments": { "type": "foo", "id": "netdev1" } }
Then, call it again with correct argument "user".
{"execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } }
This results in "DuplicatedId" error.
Because the first command was invalid, it should be able to reuse the
same "id", and the second command should work.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Commit 50e32ea8f31035877decc10f1075aa0e619e09cb changed the behaviour
for the return type of net_client_init() when a nic type with no init
method was specified. 'none' is one such nic type. Instead of returning
0, which gets interpreted as an index into the nd_table[] array, we
switched to returning -1, which signifies an error as well.
That broke VM start with '-net none'. Testing was only done with the
monitor command 'pci_add', which doesn't fail.
The correct fix would still be to return 0+ values from
net_client_init() only when the return value can be used as an index to
refer to an entry in nd_table[]. With the current code, callers can
erroneously poke into nd_table[0] when -net nic is used, which can lead
to badness.
However, this commit just returns to the previous behaviour before the
offending commit.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
To hot-unplug guest and host part of a network device, you do:
device_del NIC-ID
netdev_del NETDEV-ID
For PCI devices, device_del merely tells ACPI to unplug the device.
The device goes away for real only after the guest processed the ACPI
unplug event.
You have to wait until then (e.g. by polling info pci) before you can
unplug the netdev. Not good.
Fix by removing the "in use" check from do_netdev_del(). Deleting a
netdev while it's in use is safe; packets simply get routed to the bit
bucket.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
The correct model type wasn't getting added when hotplugging nics with
pci_add.
Testcase: start VM with default nic type. In the qemu_monitor:
(qemu) pci_add auto nic model=virtio
This results in a nic hot-plug of the same nic type as the default.
This was broken in 5294e2c774f120e10b44652ac143abda356f44eb
Also changes the behaviour where no .init is defined for a
net_client_type. Previously, 0 was returned, which indicated the init
was successful and that 0 was the index into the nd_tables[] array.
Return -1, indicating unsuccessful init, in such a case.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.
While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Second argument is now "on" or "off" instead of "up" or "down".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Monitor commands to go with -netdev.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
The conversion is shallow: client type init() methods aren't
converted. Converting them is a big job for relatively little
practical benefit, so leave it for later.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Both functions report errors nicely enough now, no need for additional
messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
There are many problems with net_set_boot_mask():
1) It is broken when using the device model instead of "-net nic". Example:
$ qemu-system-x86_64 -device rtl8139,vlan=0,id=net0,mac=52:54:00:82:41:fd,bus=pci.0,addr=0x4 -net user,vlan=0,name=hostnet0 -vnc 0.0.0.0:0 -boot n
Cannot boot from non-existent NIC
$
2) The mask was previously used to set which boot ROMs were supposed to be
loaded, but this was changed long time ago. Now all ROM images are loaded,
and SeaBIOS takes care of jumping to the right boot entry point depending on
the boot settings.
3) Interpretation and validation of the boot parameter letters is done on
the machine type code. Examples: PC accepts only a,b,c,d,n as valid boot
device letters. mac99 accepts only a,b,c,d,e,f.
As a side-effect of this change, qemu-kvm won't abort anymore if using "-boot n"
on a machine with no network devices. Checking if the requested boot device is
valid is now a task for the BIOS or the machine-type code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
It is just set by net_set_boot_mask() and never used. The logic for rom loading
changed a lot since this field was introduced. It is not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
This adds vhost binary option to tap, to enable vhost net accelerator.
Default is off for now, we'll be able to make default on long term
when we know it's stable.
vhostfd option can be used by management, to pass in the fd. Assigning
vhostfd implies vhost=on.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
We sometimes permit omitting the first option name, for example
-device foo is short for -device driver=foo. The name to use
("driver" in the example) is passed as argument to qemu_opts_parse().
For each QemuOptsList, we use at most one such name.
Move the name into QemuOptsList, and pass whether to permit the
abbreviation. This ensures continued consistency, and simplifies the
commit after next in this series.
|
|
error_report() terminates the message with a newline. Strip it it
from its arguments.
This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).
There's one place that passes arguments without newlines
intentionally: load_vmstate(). Fix it up.
|
|
Guest device and host netdev are peers, i.e. it's a 1:1 relation.
However, we fail to enforce that:
$ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) info network
Devices not on any VLAN:
net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0
e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0
virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0
It's all downhill from there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
net.c used a constant to signify no MSI vectors were specified. Extend
that to all qdev devices.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
/src/qemu/net.c: In function `net_check_clients':
/src/qemu/net.c:1287: warning: `has_nic' might be used uninitialized in this function
/src/qemu/net.c:1287: warning: `has_host_dev' might be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Clients not associated with a VLAN exist since commit d80b9fc6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Clients not associated with a VLAN exist since commit d80b9fc6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Clients not associated with a VLAN exist since commit d80b9fc6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
net_check_clients() prints this when an VLAN has host devices, but no
guest devices. It uses VLANState members nb_guest_devs and
nb_host_devs to keep track of these devices. However, -device does
not update nb_guest_devs, only net_init_nic() does that, for -net nic.
Check the VLAN clients directly, and remove the counters.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Call it right after -device devices get created.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Unused since commit 9ad4531e.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Most of these are obvious NULL-deref bug fixes, for example,
the ones in these files:
block/curl.c
net.c
slirp/misc.c
and the first one in block/vvfat.c.
The others in block/vvfat.c may not lead to an immediate segfault, but I
traced the two schedule_rename(..., strdup(path)) uses, and a failed
strdup would appear to trigger this assertion in handle_renames_and_mkdirs:
assert(commit->path);
The conversion to use qemu_strdup in envlist_to_environ is not technically
needed, but does avoid a theoretical leak in the caller when strdup fails
for one value, but later succeeds in allocating another buffer(plausible,
if one string length is much larger than the others). The caller does
not know the length of the returned list, and as such can only free
pointers until it hits the first NULL. If there are non-NULL pointers
beyond the first, their buffers would be leaked. This one is admittedly
far-fetched.
The two in linux-user/main.c are worth fixing to ensure that an
OOM error is diagnosed up front, rather than letting it provoke some
harder-to-diagnose secondary error, in case of exec failure, or worse, in
case the exec succeeds but with an invalid list of command line options.
However, considering how unlikely it is to encounter a failed strdup early
in main, this isn't a big deal. Note that adding the required uses of
qemu_strdup here and in envlist.c induce link failures because qemu_strdup
is not currently in any library they're linked with. So for now, I've
omitted those changes, as well as the fixes in target-i386/helper.c
and target-sparc/helper.c.
If you'd like to see the above discussion (or anything else)
in the commit log, just let me know and I'll be happy to adjust.
>From 9af42864fd1ea666bd25e2cecfdfae74c20aa8c7 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering@redhat.com>
Date: Mon, 8 Feb 2010 18:29:29 +0100
Subject: [PATCH] don't dereference NULL after failed strdup
Handle failing strdup by replacing each use with qemu_strdup,
so as not to dereference NULL or trigger a failing assertion.
* block/curl.c (curl_open): s/\bstrdup\b/qemu_strdup/
* block/vvfat.c (init_directories): Likewise.
(get_cluster_count_for_direntry, check_directory_consistency): Likewise.
* net.c (parse_host_src_port): Likewise.
* slirp/misc.c (fork_exec): Likewise.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add a default_net variable which specified whenever a default network
should be created. It is cleared in case any -net option is specified
and it is also added to the new -nodefaults switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add a NetClientInfo pointer to VLANClientState and use that
for the typecode and function pointers.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
... and VLANClientState::opaque and qemu_find_vlan_client().
All of these are now unused
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Common state for all NICs.
The opaque member will replace the opaque member in VLANClientState
since only NICs need it.
The conf member will allow us to iterate over NICs, access the MAC
addr for the NIC and send a packet from each NIC in qemu_announce_self().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
A replacement for qemu_new_vlan_client(), using NetClientInfo to
replace most arguments.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This is probably a little drastic, but the includes in this file are
now totally out of control when compared with what includes are
actually needed.
This may break the build on e.g. *BSD, but it will be easily fixed by
re-instating an include.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
If a receiver returns zero, that means its queue is full and it will
notify us when room is available using qemu_flush_queued_packets().
Take note of that and disable that receiver until it flushes its queue.
This is a first step towards allowing can_receive() handlers to return
true even if no buffer space is available.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Okay, this makes the tap options available on AIX even though there's
no support, but if we want to do it right we should have not compile
the tap code at all on AIX using e.g. CONFIG_TAP.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
