aboutsummaryrefslogtreecommitdiff
path: root/monitor
AgeCommit message (Collapse)Author
2024-10-22block-backend: per-device throttling of BLOCK_IO_ERROR reportsLeonid Kaplan
BLOCK_IO_ERROR events comes from guest, so we must throttle them. We still want per-device throttling, so let's use device id as a key. Signed-off-by: Leonid Kaplan <xeor@yandex-team.ru> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-ID: <20241002151806.592469-3-vsementsov@yandex-team.ru> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-06-24gdbstub: move enums into separate headerAlex Bennée
This is an experiment to further reduce the amount we throw into the exec headers. It might not be as useful as I initially thought because just under half of the users also need gdbserver_start(). Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
2024-06-21monitor: fdset: Match against O_DIRECTFabiano Rosas
We're about to enable the use of O_DIRECT in the migration code and due to the alignment restrictions imposed by filesystems we need to make sure the flag is only used when doing aligned IO. The migration will do parallel IO to different regions of a file, so we need to use more than one file descriptor. Those cannot be obtained by duplicating (dup()) since duplicated file descriptors share the file status flags, including O_DIRECT. If one migration channel does unaligned IO while another sets O_DIRECT to do aligned IO, the filesystem would fail the unaligned operation. The add-fd QMP command along with the fdset code are specifically designed to allow the user to pass a set of file descriptors with different access flags into QEMU to be later fetched by code that needs to alternate between those flags when doing IO. Extend the fdset matching to behave the same with the O_DIRECT flag. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-21monitor: Report errors from monitor_fdset_dup_fd_addFabiano Rosas
I'm keeping the EACCES because callers expect to be able to look at errno. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-21monitor: Simplify fdset and fd removalFabiano Rosas
Remove fds right away instead of setting the ->removed flag. We don't need the extra complexity of having a cleanup function reap the removed entries at a later time. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-21monitor: Stop removing non-duplicated fdsFabiano Rosas
monitor_fdsets_cleanup() currently has three responsibilities: 1- Remove the fds that have been marked for removal(->removed=true) by qmp_remove_fd(). This is overly complicated, but ok. 2- Remove any file descriptors that have been passed into QEMU and never duplicated[1,2]. A file descriptor without duplicates indicates that no part of QEMU has made use of it. This is problematic because the current implementation does it only if the guest is not running and the monitor is closed. 3- Remove/free fdsets that have become empty due to the above removals. This is ok. The scenario described in (2) is starting to show some cracks now that we're trying to consume fds from the migration code: - Doing cleanup every time the last monitor connection closes works to reap unused fds, but also has the side effect of forcing the management layer to pass the file descriptors again in case of a disconnect/re-connect, if that happened to be the only monitor connection. Another side effect is that removing an fd with qmp_remove_fd() is effectively delayed until the last monitor connection closes. The usage of mon_refcount is also problematic because it's racy. - Checking runstate_is_running() skips the cleanup unless the VM is running and avoids premature cleanup of the fds, but also has the side effect of blocking the legitimate removal of an fd via qmp_remove_fd() if the VM happens to be in another state. This affects qmp_remove_fd() and qmp_query_fdsets() in particular because requesting a removal at a bad time (guest stopped) might cause an fd to never be removed, or to be removed at a much later point in time, causing the query command to continue showing the supposedly removed fd/fdset. Note that file descriptors that *have* been duplicated are owned by the code that uses them and will be removed after qemu_close() is called. Therefore we've decided that the best course of action to avoid the undesired side-effects is to stop managing non-duplicated file descriptors. 1- efb87c1697 ("monitor: Clean up fd sets on monitor disconnect") 2- ebe52b592d ("monitor: Prevent removing fd from set during init") Reviewed-by: Peter Xu <peterx@redhat.com> [fix logic mistake: s/fdset_free/fdset_free_if_empty] Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-20monitor: Introduce monitor_fdset_*freeFabiano Rosas
Introduce new functions to remove and free no longer used fds and fdsets. We need those to decouple the remove/free routines from monitor_fdset_cleanup() which will go away in the next patches. The new functions: - monitor_fdset_free/_if_empty() will be used when a monitor connection closes and when an fd is removed to cleanup any fdset that is now empty. - monitor_fdset_fd_free() will be used to remove one or more fds that have been explicitly targeted by qmp_remove_fd(). Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-20monitor: Drop monitor_fdset_dup_fd_find/_remove()Peter Xu
Those functions are not needed, one remove function should already work. Clean it up. Here the code doesn't really care about whether we need to keep that dupfd around if close() failed: when that happens something got very wrong, keeping the dup_fd around the fdsets may not help that situation so far. Cc: Dr. David Alan Gilbert <dave@treblig.org> Cc: Markus Armbruster <armbru@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [add missing return statement, removal during traversal is not safe] Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-19hw/intc: Introduce x-query-interrupt-controllers QMP commandPhilippe Mathieu-Daudé
This is a counterpart to the HMP "info pic" command. It is being added with an "x-" prefix because this QMP command is intended as an adhoc debugging tool and will thus not be modelled in QAPI as fully structured data, nor will it have long term guaranteed stability. The existing HMP command is rewritten to call the QMP command. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20240610063518.50680-3-philmd@linaro.org>
2024-06-19hw/intc: Avoid using Monitor in INTERRUPT_STATS_PROVIDER::print_info()Philippe Mathieu-Daudé
Replace Monitor API by HumanReadableText one (see commit f2de406f29 "docs/devel: document expectations for QAPI data modelling for QMP" for rationale). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20240610063518.50680-2-philmd@linaro.org>
2024-05-10kconfig: allow compiling out QEMU device tree code per targetPaolo Bonzini
Introduce a new Kconfig symbol, CONFIG_DEVICE_TREE, that specifies whether to include the common device tree code in system/device_tree.c and to link to libfdt. For now, include it unconditionally if libfdt is available. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-24Merge tag 'housekeeping-20240424' of https://github.com/philmd/qemu into stagingRichard Henderson
Removal of deprecated code - Remove the Nios II target and hardware - Remove pvrdma device and rdmacm-mux helper - Remove GlusterFS RDMA protocol handling - Update Sriram Yagnaraman mail address # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYpE0YACgkQ4+MsLN6t # wN5PIA//egomANjRHAUAf9tdjljgT/JR49ejM7iInyxspR/xaiq0TlP2kP6aDNps # y1HAWBwfj5lGxeMgQ1mSKJGka3v2AIPWb7RbNT+9AaiWHv+sx5OrEytozUsFHLo8 # gSgRQocq0NY2a9dPbtkDqfbmq/rkCC7wgZzwroHsyOdiqYsWDKPJFleBDMjGmEaf # colhiDmhUPgvE3NNpwfEVNh/2SzxUxY8k5FHal6qij5z56ZqBglgnziDZEvGVCZ1 # uF4Hca/kh7TV2MVsdStPbGWZYDhJ/Np/2FnRoThD1Hc4qq8d/SH997m2F94tSOud # YeH54Vp5lmCeYgba5y8VP0ZPx/b9XnTtLvKggNdoqB+T2LBWPRt8kehqoaxvammF # ALzbY/t2vUxL6nIVbosOaTyqVOXvynk3/Js5S0jbnlu+vP2WvvFEzfYKIs2DIA8w # z56o/rG4KfyxF0aDB+CvLNwtJS8THqeivPqmYoKTdN9FPpN2RyBNLITrKo389ygF # 3oWy3+xsKGIPdNFY0a4l25xntqWNhND89ejzyL9M6G1cQ9RdEmTIUGTrinPQQmfP # oHIJMBeTdj7EqPL4LB3BR/htw9U5PobeMNYKFsRkS39PjGDqba5wbIdk3w5/Rcxa # s/PKdspDKWPwZ5jhcLD0qxAGJFnqM2UFjPo+U8qyI3RXKXFAn0E= # =c8Aj # -----END PGP SIGNATURE----- # gpg: Signature made Wed 24 Apr 2024 07:12:22 AM PDT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] * tag 'housekeeping-20240424' of https://github.com/philmd/qemu: block/gluster: Remove deprecated RDMA protocol handling hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helper hw/timer: Remove the ALTERA_TIMER model target/nios2: Remove the deprecated Nios II target MAINTAINERS: Update Sriram Yagnaraman mail address Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-24hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helperPhilippe Mathieu-Daudé
The whole RDMA subsystem was deprecated in commit e9a54265f5 ("hw/rdma: Deprecate the pvrdma device and the rdma subsystem") released in v8.2. Remove: - PVRDMA device - generated vmw_pvrdma/ directory from linux-headers - rdmacm-mux tool from contrib/ Cc: Yuval Shaia <yuval.shaia.ml@gmail.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20240328130255.52257-2-philmd@linaro.org>
2024-04-18util/qemu-config: Extract QMP commands to qemu-config-qmp.cPhilippe Mathieu-Daudé
QMP is irrelevant for user emulation. Extract the code related to QMP in a different source file, which won't be build for user emulation binaries. This avoid pulling pointless code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240404194757.9343-5-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240408155330.522792-7-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-03-26monitor/hmp-cmds-target: Append a space in error message in gpa2hva()Yao Xingtao
In qemu monitor mode, when we use gpa2hva command to print the host virtual address corresponding to a guest physical address, if the gpa is not in RAM, the error message is below: (qemu) gpa2hva 0x750000000 Memory at address 0x750000000is not RAM A space is missed between '0x750000000' and 'is'. Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com> Fixes: e9628441df ("hmp: gpa2hva and gpa2hpa hostaddr command") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org> Message-ID: <20240319021610.2423844-1-ruansy.fnst@fujitsu.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-13monitor/target: Include missing 'exec/memory.h' headerPhilippe Mathieu-Daudé
Include "exec/memory.h" in order to avoid: monitor/hmp-cmds-target.c:263:10: error: call to undeclared function 'memory_region_is_ram'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] if (!memory_region_is_ram(mrs.mr) && !memory_region_is_romd(mrs.mr)) { ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-26monitor: only run coroutine commands in qemu_aio_contextStefan Hajnoczi
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not polled during nested event loops. The coroutine currently reschedules itself in the main loop's qemu_aio_context AioContext, which is polled during nested event loops. One known problem is that QMP device-add calls drain_call_rcu(), which temporarily drops the BQL, leading to all sorts of havoc like other vCPU threads re-entering device emulation code while another vCPU thread is waiting in device emulation code with aio_poll(). Paolo Bonzini suggested running non-coroutine QMP handlers in the iohandler AioContext. This avoids trouble with nested event loops. His original idea was to move coroutine rescheduling to monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch() because we don't know if the QMP handler needs to run in coroutine context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have been nicer since it's associated with the monitor implementation and not as general as qmp_dispatch(), which is also used by qemu-ga. A number of qemu-iotests need updated .out files because the order of QMP events vs QMP responses has changed. Solves Issue #1933. Cc: qemu-stable@nongnu.org Fixes: 7bed89958bfbf40df9ca681cefbdca63abdde39d ("device_core: use drain_call_rcu in in qmp_device_add") Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985 Buglink: https://issues.redhat.com/browse/RHEL-17369 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20240118144823.1497953-4-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-17hmp: Improve sync-profile error messageMarkus Armbruster
Improve (qemu) sync-profile of Error: Invalid parameter 'of' to Error: invalid parameter 'of', expecting 'on', 'off', or 'reset' Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20231031111059.3407803-3-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
2023-11-06qapi: Add HV_BALLOON_STATUS_REPORT event and its QMP query commandMaciej S. Szmigiero
Used by the hv-balloon driver for (optional) guest memory status reports. Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
2023-10-04accel/tcg: Replace CPUState.env_ptr with cpu_env()Richard Henderson
Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-31hw/char: Have FEWatchFunc handlers return G_SOURCE_CONTINUE/REMOVEPhilippe Mathieu-Daudé
GLib recommend to use G_SOURCE_REMOVE / G_SOURCE_CONTINUE for GSourceFunc callbacks. Our FEWatchFunc is a GSourceFunc returning such value. Use such definitions which are "more memorable" [*]. [*] https://docs.gtk.org/glib/callback.SourceFunc.html#return-value Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230705133139.54419-5-philmd@linaro.org>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20meson: Replace CONFIG_SOFTMMU -> CONFIG_SYSTEM_ONLYPhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, use the clearer 'CONFIG_SYSTEM_ONLY' key to check for system emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-9-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-06atomics: eliminate mb_read/mb_setPaolo Bonzini
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives introduced for QEMU; their semantics are unclear and they provide a false sense of safety. The last use of qatomic_mb_read() has been removed, so delete it. qatomic_mb_set() instead can survive as an optimized qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but rename it to qatomic_set_mb() to match the order of the two operations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: do not use mb_read/mb_setPaolo Bonzini
Instead of relying on magic memory barriers, document the pattern that is being used. It is the one based on Dekker's algorithm, and in this case it is embodied as follows: enqueue request; sleeping = true; smp_mb(); smp_mb(); if (sleeping) kick(); if (!have a request) yield(); Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: extract request dequeuing to a new functionPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: introduce qmp_dispatcher_co_wakePaolo Bonzini
This makes it possible to turn qmp_dispatcher_co_busy into a static variable. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: cleanup fetching of QMP requestsPaolo Bonzini
Use a continue statement so that "after going to sleep" is treated the same way as "after processing a request". Pull the monitor_lock critical section out of monitor_qmp_requests_pop_any_with_lock() and protect qmp_dispatcher_co_shutdown with the monitor_lock. The two changes are complex to separate because monitor_qmp_dispatcher_co() previously had a complicated logic to check for shutdown both before and after going to sleep. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: cleanup detection of qmp_dispatcher_co shutting downPaolo Bonzini
Instead of overloading qmp_dispatcher_co_busy, make the coroutine pointer NULL. This will make things break spectacularly if somebody tries to start a request after monitor_cleanup(). AIO_WAIT_WHILE_UNLOCKED() does not need qatomic_mb_read(), because the macro contains all the necessary memory barriers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: do not use mb_read/mb_set for suspend_cntPaolo Bonzini
Clean up monitor_event to just use monitor_suspend/monitor_resume, using mon->mux_out to protect against incorrect nesting (especially on startup). The only remaining case of reading suspend_cnt is in the can_read callback, which is just advisory and can use qatomic_read. As an extra benefit, mux_out is now simply protected by mon_lock. Also, moving the prompt to the beginning of the main loop removes it from the output in some error cases where QEMU does not actually start successfully. It is not a full fix and it would be nice to also remove the monitor heading, but this is already a small (though unintentional) improvement. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: add more *_locked() functionsPaolo Bonzini
Allow flushing and printing to the monitor while mon->mon_lock is held. This will help cleaning up the locking of mon->mux_out and mon->suspend_cnt. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: allow calling monitor_resume under mon_lockPaolo Bonzini
Move monitor_resume()'s call to readline_show_prompt() outside the potentially locked section. Reuse the existing monitor_accept_input() bottom half for this purpose. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25monitor: use QEMU_LOCK_GUARD a bit morePaolo Bonzini
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-04-25monitor: convert monitor_cleanup() to AIO_WAIT_WHILE_UNLOCKED()Stefan Hajnoczi
monitor_cleanup() is called from the main loop thread. Calling AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is equivalent to AIO_WAIT_WHILE_UNLOCKED(NULL, ...) because neither unlocks the AioContext and the latter's assertion that we're in the main loop succeeds. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230309190855.414275-7-stefanha@redhat.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-04-25hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()Stefan Hajnoczi
The HMP monitor runs in the main loop thread. Calling AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is equivalent to AIO_WAIT_WHILE_UNLOCKED(NULL, ...) because neither unlocks the AioContext and the latter's assertion that we're in the main loop succeeds. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230309190855.414275-6-stefanha@redhat.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-03-13monitor: restrict command getfd to POSIX hostsMarc-André Lureau
Currently, the function will simply fail if ancillary fds are not provided, for ex on unsupported platforms. This changes the failure from: {"error": {"class": "GenericError", "desc": "No file descriptor supplied via SCM_RIGHTS"}} to: {"error": {"class": "CommandNotFound", "desc": "The command getfd has not been found"}} Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2023-03-13qmp: add 'get-win32-socket'Marc-André Lureau
A process with enough capabilities can duplicate a socket to QEMU. Add a QMP command to import it and add it to the monitor fd list, so it can be later used by other commands. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230306122751.2355515-9-marcandre.lureau@redhat.com>
2023-03-13monitor: release the lock before calling close()Marc-André Lureau
As per comment, presumably to avoid syscall in critical section. Fixes: 0210c3b39bef08 ("monitor: Use LOCK_GUARD macros") Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230306122751.2355515-7-marcandre.lureau@redhat.com>
2023-03-13qmp: 'add_client' actually expects socketsMarc-André Lureau
Whether it is SPICE, VNC, D-Bus, or the socket chardev, they all actually expect a socket kind or will fail in different ways at runtime. Throw an error early if the given 'add_client' fd is not a socket, and close it to avoid leaks. This allows to replace the close() call with a more correct & portable closesocket() version. (this will allow importing sockets on Windows with a specialized command in the following patch, while keeping the remaining monitor associated sockets/add_client code & usage untouched) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230306122751.2355515-6-marcandre.lureau@redhat.com>
2023-03-01readline: fix hmp completion issueDongli Zhang
The auto completion does not work in some cases. Case 1. 1. (qemu) info reg 2. Press 'Tab'. 3. It does not auto complete. Case 2. 1. (qemu) block_resize flo 2. Press 'Tab'. 3. It does not auto complete 'floppy0'. Since the readline_add_completion_of() may add any completion when strlen(pfx) is zero, we remove the check with (name[0] == '\0') because strlen() always returns zero in that case. Fixes: 52f50b1e9f8f ("readline: Extract readline_add_completion_of() from monitor") Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Message-Id: <20230207045241.8843-1-dongli.zhang@oracle.com> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-02-04monitor: Rename misc.c to hmp-target.cMarkus Armbruster
What's left in misc.c is exactly the target-dependent part of the HMP core. Rename accordingly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-33-armbru@redhat.com>
2023-02-04monitor: Loosen coupling between misc.c and monitor.c slightlyMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-32-armbru@redhat.com>
2023-02-04monitor: Move remaining QMP stuff from misc.c to qmp-cmds.cMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-31-armbru@redhat.com>
2023-02-04monitor: Move remaining HMP commands from misc.c to hmp-cmds.cMarkus Armbruster
This requires giving them external linkage. Rename do_help_cmd() to hmp_help(), and do_print() to hmp_print(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-30-armbru@redhat.com>
2023-02-04monitor: Move target-dependent HMP commands to hmp-cmds-target.cMarkus Armbruster
Target-independent hmp_gpa2hva(), hmp_gpa2hpa() move along to stay next to hmp_gva2gpa(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-29-armbru@redhat.com>
2023-02-04monitor: Move monitor_putc() next to monitor_puts & external linkageMarkus Armbruster
monitor_putc() will soon be used from more than one .c file. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-28-armbru@redhat.com>
2023-02-04monitor: Split file descriptor passing stuff off misc.cMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-27-armbru@redhat.com>
2023-02-04qdev: Move HMP command completion from monitor to softmmu/Markus Armbruster
This moves the completion code from MAINTAINERS sections "Human Monitor (HMP)" and "QMP" to section "QOM". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-26-armbru@redhat.com>
2023-02-04acpi: Move the QMP command from monitor/ to hw/acpi/Markus Armbruster
This moves the command from MAINTAINERS section "QMP" to section "ACPI/SMBIOS)". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-25-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-02-04stats: Move HMP commands from monitor/ to stats/Markus Armbruster
This moves these commands from MAINTAINERS section "Human Monitor (HMP)" to section "Stats". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-24-armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 17:12:31 +0000