aboutsummaryrefslogtreecommitdiff
path: root/monitor
AgeCommit message (Collapse)Author
2020-12-19qapi: Use QAPI_LIST_PREPEND() where possibleEric Blake
Anywhere we create a list of just one item or by prepending items (typically because order doesn't matter), we can use QAPI_LIST_PREPEND(). But places where we must keep the list in order by appending remain open-coded until later patches. Note that as a side effect, this also performs a cleanup of two minor issues in qga/commands-posix.c: the old code was performing new = g_malloc0(sizeof(*ret)); which 1) is confusing because you have to verify whether 'new' and 'ret' are variables with the same type, and 2) would conflict with C++ compilation (not an actual problem for this file, but makes copy-and-paste harder). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201113011340.463563-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [Straightforward conflicts due to commit a8aa94b5f8 "qga: update schema for guest-get-disks 'dependents' field" and commit a10b453a52 "target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c" resolved. Commit message tweaked.] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-12-18monitor:Don't use '#' flag of printf format ('%#') in format stringsYutao Ai
Delete '#' and use '0x' prefix instead Signed-off-by: Yutao Ai <aiyutao@huawei.com> Message-Id: <20201125014514.55562-4-aiyutao@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18monitor:braces {} are necessary for all arms of this statementYutao Ai
Fix the errors by add {} Signed-off-by: Yutao Ai <aiyutao@huawei.com> Message-Id: <20201125014514.55562-3-aiyutao@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18monitor:open brace '{' following struct go on the same lineYutao Ai
Move the open brace '{' following struct go on the same line Signed-off-by: Yutao Ai <aiyutao@huawei.com> Message-Id: <20201125014514.55562-2-aiyutao@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-15qmp: generalize watchdog-set-action to -no-reboot/-no-shutdownAlejandro Jimenez
Add a QMP command to allow for the behaviors specified by the -no-reboot and -no-shutdown command line option to be set at runtime. The new command is named set-action and takes optional arguments, named after an event, that provide a corresponding action to take. Example: -> { "execute": "set-action", "arguments": { "reboot": "none", "shutdown": "poweroff", "watchdog": "debug" } } <- { "return": {} } Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com> [Split the series differently, with -action based on the QMP command. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15machine: introduce MachineInitPhasePaolo Bonzini
Generalize the qdev_hotplug variable to the different phases of machine initialization. We would like to allow different monitor commands depending on the phase. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15vl: remove separate preconfig main_loopPaolo Bonzini
Move post-preconfig initialization to the x-exit-preconfig. If preconfig is not requested, just exit preconfig mode immediately with the QMP command. As a result, the preconfig loop will run with accel_setup_post and os_setup_post restrictions (xen_restrict, chroot, etc.) already done. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15remove preconfig statePaolo Bonzini
The preconfig state is only used if -incoming is not specified, which makes the RunState state machine more tricky than it need be. However there is already an equivalent condition which works even with -incoming, namely qdev_hotplug. Use it instead of a separate runstate. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * Fix for NULL segments (Bin Meng) * Support for 32768 CPUs on x86 without IOMMU (David) * PDEP/PEXT fix and testcase (myself) * Remove bios_name and ram_size globals (myself) * qemu_init rationalization (myself) * Update kernel-doc (myself + upstream patches) * Propagate MemTxResult across DMA and PCI functions (Philippe) * Remove master/slave when applicable (Philippe) * WHPX support for in-kernel irqchip (Sunil) # gpg: Signature made Thu 10 Dec 2020 17:21:50 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (113 commits) scripts: kernel-doc: remove unnecessary change wrt Linux Revert "docs: temporarily disable the kernel-doc extension" scripts: kernel-doc: use :c:union when needed scripts: kernel-doc: split typedef complex regex scripts: kernel-doc: fix typedef parsing Revert "kernel-doc: Handle function typedefs that return pointers" Revert "kernel-doc: Handle function typedefs without asterisks" scripts: kernel-doc: try to use c:function if possible scripts: kernel-doc: fix line number handling scripts: kernel-doc: allow passing desired Sphinx C domain dialect scripts: kernel-doc: don't mangle with parameter list scripts: kernel-doc: fix typedef identification scripts: kernel-doc: reimplement -nofunction argument scripts: kernel-doc: fix troubles with line counts scripts: kernel-doc: use a less pedantic markup for funcs on Sphinx 3.x scripts: kernel-doc: make it more compatible with Sphinx 3.x Revert "kernel-doc: Use c:struct for Sphinx 3.0 and later" Revert "scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments" scripts: kernel-doc: add support for typedef enum kernel-doc: add support for ____cacheline_aligned attribute ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-10sev: add sev-inject-launch-secretTobin Feldman-Fitzthum
AMD SEV allows a guest owner to inject a secret blob into the memory of a virtual machine. The secret is encrypted with the SEV Transport Encryption Key and integrity is guaranteed with the Transport Integrity Key. Although QEMU facilitates the injection of the launch secret, it cannot access the secret. Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10hmp: introduce cmd_availablePaolo Bonzini
Combine the RUN_STATE_PRECONFIG and cmd_can_preconfig checks into a single function, to avoid repeating the same expression (or its negation after applying DeMorgan's rule) over and over again. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10make ram_size local to vl.cPaolo Bonzini
Use the machine properties for the leftovers too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10ui: Tweak a client_migrate_info error messageMarkus Armbruster
Change Parameter 'protocol' expects spice to Parameter 'protocol' expects 'spice' for consistency with similar error messages elsewhere. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201113082626.2725812-7-armbru@redhat.com>
2020-12-10ui: Improve a client_migrate_info error messageMarkus Armbruster
client_migrate_info reports spice_server_migrate_connect() failure as "An undefined error has occurred". Improve to "Could not set up display for migration". QERR_UNDEFINED_ERROR is now unused. Drop. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201113082626.2725812-6-armbru@redhat.com>
2020-12-10ui: Improve some set_passwd, expire_password error messagesMarkus Armbruster
set_passwd and expire_password reject invalid "protocol" with "Invalid parameter 'protocol'". Misleading; the parameter is valid, its value isn't. Improve to "Parameter 'protocol' expects 'vnc' or 'spice'". expire_password fails with "Could not set password". Misleading; improve to "Could not set password expire time". QERR_SET_PASSWD_FAILED is now unused. Drop. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201113082626.2725812-5-armbru@redhat.com>
2020-12-10qerror: Eliminate QERR_ macros used in just one placeMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201113082626.2725812-3-armbru@redhat.com>
2020-11-24net: do not exit on "netdev_add help" monitor commandPaolo Bonzini
"netdev_add help" is causing QEMU to exit because the code that invokes show_netdevs is shared between CLI and HMP processing. Move the check to the callers so that exit(0) remains only in the CLI flow. "netdev_add help" is not fixed by this patch; that is left for later work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-13hmp: Pass monitor to mon_get_cpu_env()Kevin Wolf
mon_get_cpu_env() is indirectly called monitor_parse_arguments() where the current monitor isn't set yet. Instead of using monitor_cur_env(), explicitly pass the Monitor pointer to the function. Without this fix, an HMP command like "x $pc" crashes like this: #0 0x0000555555caa01f in mon_get_cpu_sync (mon=0x0, synchronize=true) at ../monitor/misc.c:270 #1 0x0000555555caa141 in mon_get_cpu (mon=0x0) at ../monitor/misc.c:294 #2 0x0000555555caa158 in mon_get_cpu_env () at ../monitor/misc.c:299 #3 0x0000555555b19739 in monitor_get_pc (mon=0x555556ad2de0, md=0x5555565d2d40 <monitor_defs+1152>, val=0) at ../target/i386/monitor.c:607 #4 0x0000555555cadbec in get_monitor_def (mon=0x555556ad2de0, pval=0x7fffffffc208, name=0x7fffffffc220 "pc") at ../monitor/misc.c:1681 #5 0x000055555582ec4f in expr_unary (mon=0x555556ad2de0) at ../monitor/hmp.c:387 #6 0x000055555582edbb in expr_prod (mon=0x555556ad2de0) at ../monitor/hmp.c:421 #7 0x000055555582ee79 in expr_logic (mon=0x555556ad2de0) at ../monitor/hmp.c:455 #8 0x000055555582eefe in expr_sum (mon=0x555556ad2de0) at ../monitor/hmp.c:484 #9 0x000055555582efe8 in get_expr (mon=0x555556ad2de0, pval=0x7fffffffc418, pp=0x7fffffffc408) at ../monitor/hmp.c:511 #10 0x000055555582fcd4 in monitor_parse_arguments (mon=0x555556ad2de0, endp=0x7fffffffc890, cmd=0x555556675b50 <hmp_cmds+7920>) at ../monitor/hmp.c:876 #11 0x00005555558306a8 in handle_hmp_command (mon=0x555556ad2de0, cmdline=0x555556ada452 "$pc") at ../monitor/hmp.c:1087 #12 0x000055555582df14 in monitor_command_cb (opaque=0x555556ad2de0, cmdline=0x555556ada450 "x $pc", readline_opaque=0x0) at ../monitor/hmp.c:47 After this fix, nothing is left in monitor_parse_arguments() that can indirectly call monitor_cur(), so the fix is complete. Fixes: ff04108a0e36e822519c517bd3bddbc1c7747c18 Reported-by: lichun <lichun@ruijie.com.cn> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201113114326.97663-4-kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13hmp: Pass monitor to MonitorDef.get_value()Kevin Wolf
All of these callbacks use mon_get_cpu_env(). Pass the Monitor pointer to them it in preparation for adding a monitor argument to mon_get_cpu_env(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201113114326.97663-3-kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13hmp: Pass monitor to mon_get_cpu()Kevin Wolf
mon_get_cpu() is indirectly called monitor_parse_arguments() where the current monitor isn't set yet. Instead of using monitor_cur(), explicitly pass the Monitor pointer to the function. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201113114326.97663-2-kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-04console: make QMP/HMP screendump run in coroutineMarc-André Lureau
Thanks to the monitors' coroutine support (merge commit b7092cda1b3), the screendump handler can trigger a graphic_hw_update(), yield and let the main loop run until update is done. Then the handler is resumed, and ppm_save() will write the screen image to disk in the coroutine context. The IO is still blocking though, as the file is set blocking so far, this could be addressed by some future change (with other caveats). Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1230527 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-01qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede
Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-21spice: move display_add_client() to QemuSpiceOps.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20201019075224.14803-8-kraxel@redhat.com
2020-10-21spice: move auth functions to QemuSpiceOps.Gerd Hoffmann
Move qemu_spice_set_passwd() and qemu_spice_set_pw_expire() functions to QemuSpiceOps. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20201019075224.14803-7-kraxel@redhat.com
2020-10-21spice: add QemuSpiceOps, move migrate_infoGerd Hoffmann
Add QemuSpiceOps struct. This struct holds function pointers to the spice functions. It will be initialized with pointers to the stub functions. When spice gets initialized the function pointers will be re-written to the real functions. The spice stubs will move from qemu-spice.h to spice-module.c for that, because they will be needed for both "CONFIG_SPICE=n" and "CONFIG_SPICE=y but spice module not loaded" cases. This patch adds the infrastructure and starts with moving qemu_spice_migrate_info() to QemuSpiceOps. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20201019075224.14803-3-kraxel@redhat.com
2020-10-16Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - qemu-storage-daemon: Remove QemuOpts from --object parser - monitor: Fix order in monitor_cleanup() - Deprecate the sheepdog block driver # gpg: Signature made Thu 15 Oct 2020 15:48:10 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: block: deprecate the sheepdog block driver block: drop moderated sheepdog mailing list from MAINTAINERS file monitor: Fix order in monitor_cleanup() qemu-storage-daemon: Remove QemuOpts from --object parser qom: Add user_creatable_print_help_from_qdict() qom: Factor out helpers from user_creatable_print_help() keyval: Parse help options keyval: Fix parsing of ',' in value of implied key test-keyval: Demonstrate misparse of ',' with implied key keyval: Fix and clarify grammar Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-15monitor: Fix order in monitor_cleanup()Kevin Wolf
We can only destroy Monitor objects after we're sure that they are not in use by the dispatcher coroutine any more. This fixes crashes like the following where we tried to destroy a monitor mutex while the dispatcher coroutine still holds it: (gdb) bt #0 0x00007fe541cf4bc5 in raise () at /lib64/libc.so.6 #1 0x00007fe541cdd8a4 in abort () at /lib64/libc.so.6 #2 0x000055c24e965327 in error_exit (err=16, msg=0x55c24eead3a0 <__func__.33> "qemu_mutex_destroy") at ../util/qemu-thread-posix.c:37 #3 0x000055c24e9654c3 in qemu_mutex_destroy (mutex=0x55c25133e0f0) at ../util/qemu-thread-posix.c:70 #4 0x000055c24e7cfaf1 in monitor_data_destroy_qmp (mon=0x55c25133dfd0) at ../monitor/qmp.c:439 #5 0x000055c24e7d23bc in monitor_data_destroy (mon=0x55c25133dfd0) at ../monitor/monitor.c:615 #6 0x000055c24e7d253a in monitor_cleanup () at ../monitor/monitor.c:644 #7 0x000055c24e6cb002 in qemu_cleanup () at ../softmmu/vl.c:4549 #8 0x000055c24e0d259b in main (argc=24, argv=0x7ffff66b0d58, envp=0x7ffff66b0e20) at ../softmmu/main.c:51 Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201013125027.41003-1-kwolf@redhat.com> Tested-by: Ben Widawsky <ben.widawsky@intel.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-15meson: add spice_headers dependency.Gerd Hoffmann
Used for files which (with CONFIG_SPICE=y) depend on spice header files to pick up some enum, but which do not depend on on the actual spice shared library. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20201014121120.13482-6-kraxel@redhat.com
2020-10-09hmp: Add support for coroutine command handlersKevin Wolf
Often, QMP command handlers are not only called to handle QMP commands, but also from a corresponding HMP command handler. In order to give them a consistent environment, optionally run HMP command handlers in a coroutine, too. The implementation is a lot simpler than in QMP because for HMP, we still block the VM while the coroutine is running. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20201005155855.256490-11-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09qmp: Move dispatcher to a coroutineKevin Wolf
This moves the QMP dispatcher to a coroutine and runs all QMP command handlers that declare 'coroutine': true in coroutine context so they can avoid blocking the main loop while doing I/O or waiting for other events. For commands that are not declared safe to run in a coroutine, the dispatcher drops out of coroutine context by calling the QMP command handler from a bottom half. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201005155855.256490-10-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Make current monitor a per-coroutine propertyKevin Wolf
This way, a monitor command handler will still be able to access the current monitor, but when it yields, all other code code will correctly get NULL from monitor_cur(). This uses a hash table to map the coroutine pointer to the current monitor of that coroutine. Outside of coroutine context, we associate the current monitor with the leader coroutine of the current thread. Approaches to implement some form of coroutine local storage directly in the coroutine core code have been considered and discarded because they didn't end up being much more generic than the hash table and their performance impact on coroutines not using coroutine local storage was unclear. As the block layer uses a coroutine per I/O request, this is a fast path and we have to be careful. It's safest to just stay out of this path with code only used by the monitor. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201005155855.256490-8-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09qmp: Call monitor_set_cur() only in qmp_dispatch()Kevin Wolf
The correct way to set the current monitor for a coroutine handler will be different than for a blocking handler, so monitor_set_cur() needs to be called in qmp_dispatch(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-7-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09qmp: Assert that no other monitor is activeKevin Wolf
monitor_qmp_dispatch() is never supposed to be called in the context of another monitor, so assert that monitor_cur() is NULL instead of saving and restoring it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-6-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09hmp: Update current monitor only in handle_hmp_command()Kevin Wolf
The current monitor is updated relatively early in the command handling code even though only the command handler actually needs it. The current monitor will become coroutine-local later, so we can only update it when we know in which coroutine the command will be exectued. Move it to handle_hmp_command() where this information will be available. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201005155855.256490-5-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Use getter/setter functions for cur_monKevin Wolf
cur_mon really needs to be coroutine-local as soon as we move monitor command handlers to coroutines and let them yield. As a first step, just remove all direct accesses to cur_mon so that we can implement this in the getter function later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-4-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Add Monitor parameter to monitor_get_cpu_index()Kevin Wolf
Most callers actually don't have to rely on cur_mon, but already know for which monitor they call monitor_get_cpu_index(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-3-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Add Monitor parameter to monitor_set_cpu()Kevin Wolf
Most callers actually don't have to rely on cur_mon, but already know for which monitor they call monitor_set_cpu(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201005155855.256490-2-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Extract PCI commands to 'pci.json'Philippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the PCI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-9-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Extract ACPI commands to 'acpi.json'Philippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the ACPI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-8-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict balloon-related commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the balloon-related commands to machine.json pulls less QAPI-generated code into user-mode. Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-4-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-25monitor: Use LOCK_GUARD macrosDr. David Alan Gilbert
Use the lock guard macros in monitor/misc.c - saves a lot of unlocks in error paths, and the occasional goto. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200922095741.101911-1-dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-16monitor: simplify functions for getting a dup'd fdset entryDaniel P. Berrangé
Currently code has to call monitor_fdset_get_fd, then dup the return fd, and then add the duplicate FD back into the fdset. This dance is overly verbose for the caller and introduces extra failure modes which can be avoided by folding all the logic into monitor_fdset_dup_fd_add and removing monitor_fdset_get_fd entirely. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-08configure: do not include dependency flags in QEMU_CFLAGS and LIBSPaolo Bonzini
All Meson executables should specify their dependencies explicitly, either directly or indirectly via declare_dependency. Makefiles instead did not propagate dependencies correctly from static libraries, for example. Therefore, flags for dependencies need not be included in QEMU_CFLAGS. LIBS is not used at all, so drop that one as well. In a few cases the dependencies were not yet specified, so add them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21migration: Add block-bitmap-mapping parameterMax Reitz
This migration parameter allows mapping block node names and bitmap names to aliases for the purpose of block dirty bitmap migration. This way, management tools can use different node and bitmap names on the source and destination and pass the mapping of how bitmaps are to be transferred to qemu (on the source, the destination, or even both with arbitrary aliases in the migration stream). While touching this code, fix a bug where bitmap names longer than 255 bytes would fail an assertion in qemu_put_counted_string(). Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200820150725.68687-2-mreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2020-08-21meson: convert common QMP bits for qemu and qemu-storage-daemonPaolo Bonzini
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-13monitor/misc: Remove unused "chardev/char-mux.h" includePhilippe Mathieu-Daudé
monitor/misc.c never required "chardev/char-mux.h", remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200423202112.644-2-philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-07-10qapi: Smooth another visitor error checking patternMarkus Armbruster
Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-25 02:46:42 +0000