aboutsummaryrefslogtreecommitdiff
path: root/monitor/hmp-cmds.c
AgeCommit message (Collapse)Author
2022-03-02qapi/monitor: allow VNC display id in set/expire_passwordStefan Reiter
It is possible to specify more than one VNC server on the command line, either with an explicit ID or the auto-generated ones à la "default", "vnc2", "vnc3", ... It is not possible to change the password on one of these extra VNC displays though. Fix this by adding a "display" parameter to the "set_password" and "expire_password" QMP and HMP commands. For HMP, the display is specified using the "-d" value flag. For QMP, the schema is updated to explicitly express the supported variants of the commands with protocol-discriminated unions. Signed-off-by: Stefan Reiter <s.reiter@proxmox.com> [FE: update "Since: " from 6.2 to 7.0 make @connected a common member of @SetPasswordOptions] Signed-off-by: Fabian Ebner <f.ebner@proxmox.com> Message-Id: <20220225084949.35746-4-f.ebner@proxmox.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-03-02qapi/monitor: refactor set/expire_password with enumsStefan Reiter
'protocol' and 'connected' are better suited as enums than as strings, make use of that. No functional change intended. Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Reiter <s.reiter@proxmox.com> [FE: update "Since: " from 6.2 to 7.0 put 'keep' first in enum to ease use as a default] Signed-off-by: Fabian Ebner <f.ebner@proxmox.com> Message-Id: <20220225084949.35746-3-f.ebner@proxmox.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-01-28migration: Tally pre-copy, downtime and post-copy bytes independentlyDavid Edmondson
Provide information on the number of bytes copied in the pre-copy, downtime and post-copy phases of migration. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-12-10numa: Enable numa for SGX EPC sectionsYang Zhong
The basic SGX did not enable numa for SGX EPC sections, which result in all EPC sections located in numa node 0. This patch enable SGX numa function in the guest and the EPC section can work with RAM as one numa node. The Guest kernel related log: [ 0.009981] ACPI: SRAT: Node 0 PXM 0 [mem 0x180000000-0x183ffffff] [ 0.009982] ACPI: SRAT: Node 1 PXM 1 [mem 0x184000000-0x185bfffff] The SRAT table can normally show SGX EPC sections menory info in different numa nodes. The SGX EPC numa related command: ...... -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -cpu host,+sgx-provisionkey \ -object memory-backend-ram,size=2G,host-nodes=0,policy=bind,id=node0 \ -object memory-backend-epc,id=mem0,size=64M,prealloc=on,host-nodes=0,policy=bind \ -numa node,nodeid=0,cpus=0-1,memdev=node0 \ -object memory-backend-ram,size=2G,host-nodes=1,policy=bind,id=node1 \ -object memory-backend-epc,id=mem1,size=28M,prealloc=on,host-nodes=1,policy=bind \ -numa node,nodeid=1,cpus=2-3,memdev=node1 \ -M sgx-epc.0.memdev=mem0,sgx-epc.0.node=0,sgx-epc.1.memdev=mem1,sgx-epc.1.node=1 \ ...... Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211101162009.62161-2-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-03Merge remote-tracking branch ↵Richard Henderson
'remotes/vivier/tags/trivial-branch-for-6.2-pull-request' into staging Trivial patches branch pull request 20211101 v2 # gpg: Signature made Tue 02 Nov 2021 07:21:44 PM EDT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] * remotes/vivier/tags/trivial-branch-for-6.2-pull-request: hw/input/lasips2: Fix typos in function names MAINTAINERS: Split HPPA TCG vs HPPA machines/hardware hw/core/machine: Add the missing delimiter in cpu_slot_to_string() monitor: Trim some trailing space from human-readable output Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02qapi: introduce x-query-irq QMP commandDaniel P. Berrangé
This is a counterpart to the HMP "info irq" command. It is being added with an "x-" prefix because this QMP command is intended as an adhoc debugging tool and will thus not be modelled in QAPI as fully structured data, nor will it have long term guaranteed stability. The existing HMP command is rewritten to call the QMP command. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02qapi: introduce x-query-ramblock QMP commandDaniel P. Berrangé
This is a counterpart to the HMP "info ramblock" command. It is being added with an "x-" prefix because this QMP command is intended as an adhoc debugging tool and will thus not be modelled in QAPI as fully structured data, nor will it have long term guaranteed stability. The existing HMP command is rewritten to call the QMP command. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02qapi: introduce x-query-rdma QMP commandDaniel P. Berrangé
This is a counterpart to the HMP "info rdma" command. It is being added with an "x-" prefix because this QMP command is intended as an adhoc debugging tool and will thus not be modelled in QAPI as fully structured data, nor will it have long term guaranteed stability. The existing HMP command is rewritten to call the QMP command. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02monitor: make hmp_handle_error return a booleanDaniel P. Berrangé
This turns the pattern if (err) { hmp_handle_error(mon, err); return; } into if (hmp_handle_error(mon, err)) { return; } Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-10-31monitor: Trim some trailing space from human-readable outputMarkus Armbruster
I noticed -cpu help printing enough trailing spaces to make the output at least 84 characters wide. Looks ugly unless the terminal is wider. Ugly or not, trailing spaces are stupid. The culprit is this line in x86_cpu_list_entry(): qemu_printf("x86 %-20s %-58s\n", name, desc); This prints a string with minimum field left-justified right before a newline. Change it to qemu_printf("x86 %-20s %s\n", name, desc); which avoids the trailing spaces and is simpler to boot. A search for the pattern with "git-grep -E '%-[0-9]+s\\n'" found a few more instances. Change them similarly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20211009152401.2982862-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-30sgx-epc: Add the fill_device_info() callback supportYang Zhong
Since there is no fill_device_info() callback support, and when we execute "info memory-devices" command in the monitor, the segfault will be found. This patch will add this callback support and "info memory-devices" will show sgx epc memory exposed to guest. The result as below: qemu) info memory-devices Memory device [sgx-epc]: "" memaddr: 0x180000000 size: 29360128 memdev: /objects/mem1 Memory device [sgx-epc]: "" memaddr: 0x181c00000 size: 10485760 memdev: /objects/mem2 Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-33-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-27Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-25-v2' ↵Peter Maydell
into staging QAPI patches patches for 2021-09-25 # gpg: Signature made Mon 27 Sep 2021 13:44:23 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2021-09-25-v2: (25 commits) tests/qapi-schema: Make test-qapi.py -u work when files are absent tests/qapi-schema: Use Python OSError instead of outmoded IOError test-clone-visitor: Correct an accidental rename tests/qapi-schema: Rename flat-union-* test cases to union-* qapi: Drop simple unions tests/qapi-schema: Purge simple unions from tests tests/qapi-schema: Drop simple union __org.qemu_x-Union1 test-clone-visitor: Wean off __org.qemu_x-Union1 tests/qapi-schema: Rewrite simple union TestIfUnion to be flat tests/qapi-schema: Simple union UserDefListUnion is now unused, drop tests/qapi-schema: Wean off UserDefListUnion test-clone-visitor: Wean off UserDefListUnion test-qobject-output-visitor: Wean off UserDefListUnion test-qobject-input-visitor: Wean off UserDefListUnion tests/qapi-schema: Prepare for simple union UserDefListUnion removal qapi: Convert simple union TransactionAction to flat one qapi: Convert simple union ImageInfoSpecific to flat one qapi: Convert simple union SocketAddressLegacy to flat one qapi: Convert simple union ChardevBackend to flat one qapi: Convert simple union MemoryDeviceInfo to flat one ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-27hmp: Unbreak "change vnc"Markus Armbruster
HMP command "change vnc" can take the password as argument, or prompt for it: (qemu) change vnc password 123 (qemu) change vnc password Password: *** (qemu) This regressed in commit cfb5387a1d "hmp: remove "change vnc TARGET" command", v6.0.0. (qemu) change vnc passwd 123 Password: *** (qemu) change vnc passwd (qemu) The latter passes NULL to qmp_change_vnc_password(), which is a no-no. Looks like it puts the display into "password required, but none set" state. The logic error is easy to miss in review, but testing should've caught it. Fix the obvious way. Fixes: cfb5387a1de2acda23fb5c97d2378b9e7ddf8025 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210909081219.308065-2-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-27qapi: Convert simple union TpmTypeOptions to flat oneMarkus Armbruster
Simple unions predate flat unions. Having both complicates the QAPI schema language and the QAPI generator. We haven't been using simple unions in new code for a long time, because they are less flexible and somewhat awkward on the wire. To prepare for their removal, convert simple union TpmTypeOptions to an equivalent flat one, with existing enum TpmType replacing implicit enum TpmTypeOptionsKind. Adds some boilerplate to the schema, which is a bit ugly, but a lot easier to maintain than the simple union feature. Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20210917143134.412106-6-armbru@redhat.com> [Indentation tidied up]
2021-07-21iothread: add aio-max-batch parameterStefano Garzarella
The `aio-max-batch` parameter will be propagated to AIO engines and it will be used to control the maximum number of queued requests. When there are in queue a number of requests equal to `aio-max-batch`, the engine invokes the system call to forward the requests to the kernel. This parameter allows us to control the maximum batch size to reduce the latency that requests might accumulate while queued in the AIO engine queue. If `aio-max-batch` is equal to 0 (default value), the AIO engine will use its default maximum batch size value. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20210721094211.69853-3-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-06-15tpm: Return QMP error when TPM is disabled in buildPhilippe Mathieu-Daudé
When the management layer queries a binary built using --disable-tpm for TPM devices, it gets confused by getting empty responses: { "execute": "query-tpm" } { "return": [ ] } { "execute": "query-tpm-types" } { "return": [ ] } { "execute": "query-tpm-models" } { "return": [ ] } To make it clearer by returning an error: - Make the TPM QAPI schema conditional All of tpm.json is now 'if': 'defined(CONFIG_TPM)'. - Adapt the HMP command - Remove stubs which became unnecessary The management layer now gets a 'CommandNotFound' error: { "execute": "query-tpm" } { "error": { "class": "CommandNotFound", "desc": "The command query-tpm has not been found" } } Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2021-05-26hmp: Fix loadvm to resume the VM on success instead of failureKevin Wolf
Commit f61fe11aa6f broke hmp_loadvm() by adding an incorrect negation when converting from 0/-errno return values to a bool value. The result is that loadvm resumes the VM now if it failed and keeps it stopped if it failed. Fix it to restore the old behaviour and do it the other way around. Fixes: f61fe11aa6f7f8f0ffe4ddaa56a8108f3ab57854 Cc: qemu-stable@nongnu.org Reported-by: Yanhui Ma <yama@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210511163151.45167-1-kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration: Drop redundant query-migrate result @blockedMarkus Armbruster
Result @blocked is redundant. Unfortunately, we realized this too close to the release to risk dropping it, so we deprecated it instead, in commit e11ce6c06. Since it was deprecated from the start, we can delete it without the customary grace period. Do so. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210429140424.2802929-1-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-19hmp: QAPIfy object_addKevin Wolf
This switches the HMP command object_add from a QemuOpts-based parser to user_creatable_add_from_str() which uses a keyval parser and enforces the QAPI schema. Apart from being a cleanup, this makes non-scalar properties and help accessible. In order for help to be printed to the monitor instead of stdout, the printf() calls in the help functions are changed to qemu_printf(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-18migrate: remove QMP/HMP commands for speed, downtime and cache sizeDaniel P. Berrangé
The generic 'migrate_set_parameters' command handle all types of param. Only the QMP commands were documented in the deprecations page, but the rationale for deprecating applies equally to HMP, and the replacements exist. Furthermore the HMP commands are just shims to the QMP commands, so removing the latter breaks the former unless they get re-implemented. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-08migration: introduce a delete_snapshot wrapperDaniel P. Berrangé
Make snapshot deletion consistent with the snapshot save and load commands by using a wrapper around the blockdev layer. The main difference is that we get upfront validation of the passed in device list (if any). Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-10-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: wire up support for snapshot device selectionDaniel P. Berrangé
Modify load_snapshot/save_snapshot to accept the device list and vmstate node name parameters previously added to the block layer. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-9-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: control whether snapshots are ovewrittenDaniel P. Berrangé
The traditional HMP "savevm" command will overwrite an existing snapshot if it already exists with the requested name. This new flag allows this to be controlled allowing for safer behaviour with a future QMP command. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-8-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08block: add ability to specify list of blockdevs during snapshotDaniel P. Berrangé
When running snapshot operations, there are various rules for which blockdevs are included/excluded. While this provides reasonable default behaviour, there are scenarios that are not well handled by the default logic. Some of the conditions do not have a single correct answer. Thus there needs to be a way for the mgmt app to provide an explicit list of blockdevs to perform snapshots across. This can be achieved by passing a list of node names that should be used. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-5-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: stop returning errno from load_snapshot()Daniel P. Berrangé
None of the callers care about the errno value since there is a full Error object populated. This gives consistency with save_snapshot() which already just returns a boolean value. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [PMD: Return false/true instead of -1/0, document function] Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210204124834.774401-4-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08block: push error reporting into bdrv_all_*_snapshot functionsDaniel P. Berrangé
The bdrv_all_*_snapshot functions return a BlockDriverState pointer for the invalid backend, which the callers then use to report an error message. In some cases multiple callers are reporting the same error message, but with slightly different text. In the future there will be more error scenarios for some of these methods, which will benefit from fine grained error message reporting. So it is helpful to push error reporting down a level. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [PMD: Initialize variables] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210204124834.774401-2-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: Display the migration blockersDr. David Alan Gilbert
Update 'info migrate' to display migration blocking information. If the outbound migration is not blocked, there is no change, however if it is blocked a message is displayed with a list of reasons why, e.g. qemu-system-x86_64 -nographic -smp 4 -m 4G -M pc,usb=on \ -chardev null,id=n -device usb-serial,chardev=n \ -virtfs local,path=/home,mount_tag=fs,security_model=none \ -drive if=virtio,file=myimage.qcow2 (qemu) info migrate globals: store-global-state: on only-migratable: off send-configuration: on send-section-footer: on decompress-error-check: on clear-bitmap-shift: 18 Outgoing migration blocked: Migration is disabled when VirtFS export path '/home' is mounted in the guest using mount_tag 'fs' non-migratable device: 0000:00:01.2/1/usb-serial Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202135522.127380-3-dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: Fix migrate-set-parameters argument validationMarkus Armbruster
Commit 741d4086c8 "migration: Use proper types in json" (v2.12.0) switched MigrationParameters to narrower integer types, and removed the simplified qmp_migrate_set_parameters()'s argument checking accordingly. Good idea, except qmp_migrate_set_parameters() takes MigrateSetParameters, not MigrationParameters. Its job is updating migrate_get_current()->parameters (which *is* of type MigrationParameters) according to its argument. The integers now get truncated silently. Reproducer: ---> {'execute': 'query-migrate-parameters'} <--- {"return": {[...] "compress-threads": 8, [...]}} ---> {"execute": "migrate-set-parameters", "arguments": {"compress-threads": 257}} <--- {"return": {}} ---> {'execute': 'query-migrate-parameters'} <--- {"return": {[...] "compress-threads": 1, [...]}} Fix by resynchronizing MigrateSetParameters with MigrationParameters. Fixes: 741d4086c856320807a2575389d7c0505578270b Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202141734.2488076-2-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-01-28qapi: More complex uses of QAPI_LIST_APPENDEric Blake
These cases require a bit more thought to review; in each case, the code was appending to a list, but not with a FOOList **tail variable. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210113221013.390592-6-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Flawed change to qmp_guest_network_get_interfaces() dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-28qapi: Use QAPI_LIST_APPEND in trivial casesEric Blake
The easiest spots to use QAPI_LIST_APPEND are where we already have an obvious pointer to the tail of a list. While at it, consistently use the variable name 'tail' for that purpose. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210113221013.390592-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-23hmp: remove "change vnc TARGET" commandPaolo Bonzini
The HMP command \"change vnc TARGET\" is messy: - it takes an ugly shortcut to determine if the option has an "id", with incorrect results if "id=" is not preceded by an unescaped comma. - it deletes the existing QemuOpts and does not try to rollback if the parsing fails (which is not causing problems, but only due to how VNC options are parsed) - because it uses the same parsing function as "-vnc", it forces the latter to not support "-vnc help". On top of this, it uses a deprecated QMP command, thus getting in the way of removing the QMP command. Since the usecase for the command is not clear, just remove it and send "change vnc password" directly to the QMP "change-vnc-password" command. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210120144235.345983-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-08Remove superfluous timer_del() callsPeter Maydell
This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
2021-01-01Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into ↵Peter Maydell
staging QAPI patches patches for 2020-12-19 # gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits) qobject: Make QString immutable block: Use GString instead of QString to build filenames keyval: Use GString to accumulate value strings json: Use GString instead of QString to accumulate strings migration: Replace migration's JSON writer by the general one qobject: Factor JSON writer out of qobject_to_json() qobject: Factor quoted_str() out of to_json() qobject: Drop qstring_get_try_str() qobject: Drop qobject_get_try_str() Revert "qobject: let object_property_get_str() use new API" block: Avoid qobject_get_try_str() qmp: Fix tracing of non-string command IDs qobject: Move internals to qobject-internal.h hw/rdma: Replace QList by GQueue Revert "qstring: add qstring_free()" qobject: Change qobject_to_json()'s value to GString qobject: Use GString instead of QString to accumulate JSON qobject: Make qobject_to_json_pretty() take a pretty argument monitor: Use GString instead of QString for output buffer hmp: Simplify how qmp_human_monitor_command() gets output ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-19qapi: Use QAPI_LIST_PREPEND() where possibleEric Blake
Anywhere we create a list of just one item or by prepending items (typically because order doesn't matter), we can use QAPI_LIST_PREPEND(). But places where we must keep the list in order by appending remain open-coded until later patches. Note that as a side effect, this also performs a cleanup of two minor issues in qga/commands-posix.c: the old code was performing new = g_malloc0(sizeof(*ret)); which 1) is confusing because you have to verify whether 'new' and 'ret' are variables with the same type, and 2) would conflict with C++ compilation (not an actual problem for this file, but makes copy-and-paste harder). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201113011340.463563-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [Straightforward conflicts due to commit a8aa94b5f8 "qga: update schema for guest-get-disks 'dependents' field" and commit a10b453a52 "target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c" resolved. Commit message tweaked.] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-12-18monitor:open brace '{' following struct go on the same lineYutao Ai
Move the open brace '{' following struct go on the same line Signed-off-by: Yutao Ai <aiyutao@huawei.com> Message-Id: <20201125014514.55562-2-aiyutao@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-24net: do not exit on "netdev_add help" monitor commandPaolo Bonzini
"netdev_add help" is causing QEMU to exit because the code that invokes show_netdevs is shared between CLI and HMP processing. Move the check to the callers so that exit(0) remains only in the CLI flow. "netdev_add help" is not fixed by this patch; that is left for later work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-04console: make QMP/HMP screendump run in coroutineMarc-André Lureau
Thanks to the monitors' coroutine support (merge commit b7092cda1b3), the screendump handler can trigger a graphic_hw_update(), yield and let the main loop run until update is done. Then the handler is resumed, and ppm_save() will write the screen image to disk in the coroutine context. The IO is still blocking though, as the file is set blocking so far, this could be addressed by some future change (with other caveats). Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1230527 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-01qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede
Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-09monitor: Add Monitor parameter to monitor_get_cpu_index()Kevin Wolf
Most callers actually don't have to rely on cur_mon, but already know for which monitor they call monitor_get_cpu_index(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-3-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Add Monitor parameter to monitor_set_cpu()Kevin Wolf
Most callers actually don't have to rely on cur_mon, but already know for which monitor they call monitor_set_cpu(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201005155855.256490-2-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Extract PCI commands to 'pci.json'Philippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the PCI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-9-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict balloon-related commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the balloon-related commands to machine.json pulls less QAPI-generated code into user-mode. Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-4-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-08-21migration: Add block-bitmap-mapping parameterMax Reitz
This migration parameter allows mapping block node names and bitmap names to aliases for the purpose of block dirty bitmap migration. This way, management tools can use different node and bitmap names on the source and destination and pass the mapping of how bitmaps are to be transferred to qemu (on the source, the destination, or even both with arbitrary aliases in the migration stream). While touching this code, fix a bug where bitmap names longer than 255 bytes would fail an assertion in qemu_put_counted_string(). Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200820150725.68687-2-mreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10hmp: Eliminate a variable in hmp_migrate_set_parameter()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-17-armbru@redhat.com>
2020-07-03hmp: Handle virtio-mem when printing memory device infoDavid Hildenbrand
Print the memory device info just like for other memory devices. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-14-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-17monitor/hmp-cmds: improvements for the 'info migrate'Mao Zhongyi
When running: (qemu) info migrate globals: store-global-state: on only-migratable: off ... xbzrle transferred: 640892 kbytes xbzrle pages: 16645936 pages xbzrle cache miss: 1525426 xbzrle cache miss rate: 0.09 xbzrle encoding rate: 91.42 xbzrle overflow: 40896 ... compression pages: 377710 pages compression busy: 0 compression busy rate: 0.00 compressed size: 463169457 compression rate: 3.33 Add units for 'xbzrle cache miss' and 'compressed size', make it easier to read. Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200603080904.997083-8-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17monitor/hmp-cmds: add 'goto end' to reduce duplicate code.Mao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200603080904.997083-7-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()Mao Zhongyi
hmp_handle_error() does Error check internally. Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200603080904.997083-6-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' ↵Mao Zhongyi
fails Although 'migrate_set_downtime' has been deprecated and replaced with 'migrate_set_parameter downtime_limit', it has not been completely eliminated, possibly due to compatibility with older versions. I think as long as this old parameter is running, we should report appropriate message when something goes wrong, not be silent. before: (qemu) migrate_set_downtime -1 (qemu) after: (qemu) migrate_set_downtime -1 Error: Parameter 'downtime_limit' expects an integer in the range of 0 to 2000 seconds Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200603080904.997083-5-maozhongyi@cmss.chinamobile.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 22:44:14 +0000