aboutsummaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)Author
2020-06-01migration/migration.c: Fix hang in ram_save_host_pageLukas Straub
migration_rate_limit will erroneously ratelimit a shutdown socket, which causes the migration thread to hang in ram_save_host_page if the socket is shutdown. Fix this by explicitly testing if the socket has errors or was shutdown in migration_rate_limit. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Message-Id: <e79085bbe2d46dfa007dd41820194d5e2d4fcd80.1590007004.git.lukasstraub2@web.de> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01migration/colo.c: Move colo_notify_compares_event to the right placeLukas Straub
If the secondary has to failover during checkpointing, it still is in the old state (i.e. different state than primary). Thus we can't expose the primary state until after the checkpoint is sent. This fixes sporadic connection reset of client connections during failover. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Message-Id: <d4555dd5146a54518c4d9d4efd996b7c745c6687.1589193382.git.lukasstraub2@web.de> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01migration/colo.c: Relaunch failover even if there was an errorLukas Straub
If vmstate_loading is true, secondary_vm_do_failover will set failover status to FAILOVER_STATUS_RELAUNCH and return success without initiating failover. However, if there is an error during the vmstate_loading section, failover isn't relaunched. Instead we then wait for failover on colo_incoming_sem. Fix this by relaunching failover even if there was an error. Also, to make this work properly, set vmstate_loading to false when returning during the vmstate_loading section. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Message-Id: <f60b0a8e2fadaaec792e04819dfc46951842d6ba.1589193382.git.lukasstraub2@web.de> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01migration/colo.c: Flush ram cache only after receiving device stateLukas Straub
If we suceed in receiving ram state, but fail receiving the device state, there will be a mismatch between the two. Fix this by flushing the ram cache only after the vmstate has been received. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Message-Id: <3289d007d494cb0e2f05b1cf4ae6a78d300fede3.1589193382.git.lukasstraub2@web.de> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01migration/colo.c: Use cpu_synchronize_all_states()Lukas Straub
cpu_synchronize_all_pre_loadvm() marks all vcpus as dirty, so the registers are loaded from CPUState before we continue running the vm. However if we failover during checkpoint, CPUState is not initialized and the registers are loaded with garbage. This causes guest hangs and crashes. Fix this by using cpu_synchronize_all_states(), which initializes CPUState from the current cpu registers additionally to marking the vcpus as dirty. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Message-Id: <9675031ce557b73ebd10e7bd20ebbf57f30b177c.1589193382.git.lukasstraub2@web.de> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01migration/colo.c: Use event instead of semaphoreLukas Straub
If multiple packets miscompare in a short timeframe, the semaphore value will be increased multiple times. This causes multiple checkpoints even if one would be sufficient. Fix this by using a event instead of a semaphore for triggering checkpoints. Now, checkpoint requests will be ignored until the checkpoint event is sent to colo-compare (which releases the miscompared packets). Benchmark results (iperf3): Client-to-server tcp: without patch: ~66 Mbit/s with patch: ~61 Mbit/s Server-to-client tcp: without patch: ~702 Kbit/s with patch: ~16 Mbit/s Signed-off-by: Lukas Straub <lukasstraub2@web.de> Message-Id: <fd601ba1beb524aada54ba66e87ebfc12cf4574b.1589193382.git.lukasstraub2@web.de> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01migration/rdma: cleanup rdma context before g_free to avoid memleaksPan Nengyuan
When error happen in initializing 'rdma_return_path', we should cleanup rdma context before g_free(rdma) to avoid some memleaks. This patch fix that. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200508100755.7875-3-pannengyuan@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01migration/rdma: fix potential nullptr access in rdma_start_incoming_migrationPan Nengyuan
'rdma' is NULL when taking the first error branch in rdma_start_incoming_migration. And it will cause a null pointer access in label 'err'. Fix that. Fixes: 59c59c67ee6b0327ae932deb303caa47919aeb1e Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200508100755.7875-2-pannengyuan@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Note this is CID 1428762
2020-05-28migration: forbid bitmap migration by generated node-nameVladimir Sementsov-Ogievskiy
It actually never worked with libvirt, as auto-generated names are different on source and destination. It's unsafe and useless to migrate by auto-generated node-names, so let's forbid it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200521220648.3255-7-vsementsov@virtuozzo.com> [eblake: shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-28migration: add_bitmaps_to_list: check disk name onceVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200521220648.3255-6-vsementsov@virtuozzo.com> [eblake: shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-28migration: fix bitmaps pre-blockdev migration with mirror jobVladimir Sementsov-Ogievskiy
Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-28migration: refactor init_dirty_bitmap_migrationVladimir Sementsov-Ogievskiy
Split out handling one bs, it is needed for the following commit, which will handle BlockBackends separately. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200521220648.3255-2-vsementsov@virtuozzo.com> [eblake: shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-07migration/multifd: Do error_free after migrate_set_error to avoid memleaksPan Nengyuan
When error happen in multifd_send_thread, it use error_copy to set migrate error in multifd_send_terminate_threads(). We should call error_free after it. Similarly, fix another two places in multifd_recv_thread/multifd_save_cleanup. The leak stack: Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f781af07cf0 in calloc (/lib64/libasan.so.5+0xefcf0) #1 0x7f781a2ce22d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5322d) #2 0x55ee1d075c17 in error_setv /mnt/sdb/backup/qemu/util/error.c:61 #3 0x55ee1d076464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109 #4 0x55ee1cef066e in qio_channel_socket_writev /mnt/sdb/backup/qemu/io/channel-socket.c:569 #5 0x55ee1cee806b in qio_channel_writev /mnt/sdb/backup/qemu/io/channel.c:207 #6 0x55ee1cee806b in qio_channel_writev_all /mnt/sdb/backup/qemu/io/channel.c:171 #7 0x55ee1cee8248 in qio_channel_write_all /mnt/sdb/backup/qemu/io/channel.c:257 #8 0x55ee1ca12c9a in multifd_send_thread /mnt/sdb/backup/qemu/migration/multifd.c:657 #9 0x55ee1d0607fc in qemu_thread_start /mnt/sdb/backup/qemu/util/qemu-thread-posix.c:519 #10 0x7f78159ae2dd in start_thread (/lib64/libpthread.so.0+0x82dd) #11 0x7f78156df4b2 in __GI___clone (/lib64/libc.so.6+0xfc4b2) Indirect leak of 52 byte(s) in 1 object(s) allocated from: #0 0x7f781af07f28 in __interceptor_realloc (/lib64/libasan.so.5+0xeff28) #1 0x7f78156f07d9 in __GI___vasprintf_chk (/lib64/libc.so.6+0x10d7d9) #2 0x7f781a30ea6c in g_vasprintf (/lib64/libglib-2.0.so.0+0x93a6c) #3 0x7f781a2e7cd0 in g_strdup_vprintf (/lib64/libglib-2.0.so.0+0x6ccd0) #4 0x7f781a2e7d8c in g_strdup_printf (/lib64/libglib-2.0.so.0+0x6cd8c) #5 0x55ee1d075c86 in error_setv /mnt/sdb/backup/qemu/util/error.c:65 #6 0x55ee1d076464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109 #7 0x55ee1cef066e in qio_channel_socket_writev /mnt/sdb/backup/qemu/io/channel-socket.c:569 #8 0x55ee1cee806b in qio_channel_writev /mnt/sdb/backup/qemu/io/channel.c:207 #9 0x55ee1cee806b in qio_channel_writev_all /mnt/sdb/backup/qemu/io/channel.c:171 #10 0x55ee1cee8248 in qio_channel_write_all /mnt/sdb/backup/qemu/io/channel.c:257 #11 0x55ee1ca12c9a in multifd_send_thread /mnt/sdb/backup/qemu/migration/multifd.c:657 #12 0x55ee1d0607fc in qemu_thread_start /mnt/sdb/backup/qemu/util/qemu-thread-posix.c:519 #13 0x7f78159ae2dd in start_thread (/lib64/libpthread.so.0+0x82dd) #14 0x7f78156df4b2 in __GI___clone (/lib64/libc.so.6+0xfc4b2) Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200506095416.26099-3-pannengyuan@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/multifd: fix memleaks in multifd_new_send_channel_asyncPan Nengyuan
When error happen in multifd_new_send_channel_async, 'sioc' will not be used to create the multifd_send_thread. Let's free it to avoid a memleak. And also do error_free after migrate_set_error() to avoid another leak in the same place. The leak stack: Direct leak of 2880 byte(s) in 8 object(s) allocated from: #0 0x7f20b5118ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8) #1 0x7f20b44df1d5 in g_malloc (/lib64/libglib-2.0.so.0+0x531d5) #2 0x564133bce18b in object_new_with_type /mnt/sdb/backup/qemu/qom/object.c:683 #3 0x564133eea950 in qio_channel_socket_new /mnt/sdb/backup/qemu/io/channel-socket.c:56 #4 0x5641339cfe4f in socket_send_channel_create /mnt/sdb/backup/qemu/migration/socket.c:37 #5 0x564133a10328 in multifd_save_setup /mnt/sdb/backup/qemu/migration/multifd.c:772 #6 0x5641339cebed in migrate_fd_connect /mnt/sdb/backup/qemu/migration/migration.c:3530 #7 0x5641339d15e4 in migration_channel_connect /mnt/sdb/backup/qemu/migration/channel.c:92 #8 0x5641339cf5b7 in socket_outgoing_migration /mnt/sdb/backup/qemu/migration/socket.c:108 Direct leak of 384 byte(s) in 8 object(s) allocated from: #0 0x7f20b5118cf0 in calloc (/lib64/libasan.so.5+0xefcf0) #1 0x7f20b44df22d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5322d) #2 0x56413406fc17 in error_setv /mnt/sdb/backup/qemu/util/error.c:61 #3 0x564134070464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109 #4 0x5641340851be in inet_connect_addr /mnt/sdb/backup/qemu/util/qemu-sockets.c:379 #5 0x5641340851be in inet_connect_saddr /mnt/sdb/backup/qemu/util/qemu-sockets.c:458 #6 0x5641340870ab in socket_connect /mnt/sdb/backup/qemu/util/qemu-sockets.c:1105 #7 0x564133eeaabf in qio_channel_socket_connect_sync /mnt/sdb/backup/qemu/io/channel-socket.c:145 #8 0x564133eeabf5 in qio_channel_socket_connect_worker /mnt/sdb/backup/qemu/io/channel-socket.c:168 Indirect leak of 360 byte(s) in 8 object(s) allocated from: #0 0x7f20b5118ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8) #1 0x7f20af901817 in __GI___vasprintf_chk (/lib64/libc.so.6+0x10d817) #2 0x7f20b451fa6c in g_vasprintf (/lib64/libglib-2.0.so.0+0x93a6c) #3 0x7f20b44f8cd0 in g_strdup_vprintf (/lib64/libglib-2.0.so.0+0x6ccd0) #4 0x7f20b44f8d8c in g_strdup_printf (/lib64/libglib-2.0.so.0+0x6cd8c) #5 0x56413406fc86 in error_setv /mnt/sdb/backup/qemu/util/error.c:65 #6 0x564134070464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109 #7 0x5641340851be in inet_connect_addr /mnt/sdb/backup/qemu/util/qemu-sockets.c:379 #8 0x5641340851be in inet_connect_saddr /mnt/sdb/backup/qemu/util/qemu-sockets.c:458 #9 0x5641340870ab in socket_connect /mnt/sdb/backup/qemu/util/qemu-sockets.c:1105 #10 0x564133eeaabf in qio_channel_socket_connect_sync /mnt/sdb/backup/qemu/io/channel-socket.c:145 #11 0x564133eeabf5 in qio_channel_socket_connect_worker /mnt/sdb/backup/qemu/io/channel-socket.c:168 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200506095416.26099-2-pannengyuan@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/xbzrle: add encoding rateWei Wang
Users may need to check the xbzrle encoding rate to know if the guest memory is xbzrle encoding-friendly, and dynamically turn off the encoding if the encoding rate is low. Signed-off-by: Yi Sun <yi.y.sun@intel.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/rdma: fix a memleak on error path in rdma_start_incoming_migrationPan Nengyuan
'rdma->host' is malloced in qemu_rdma_data_init, but forgot to free on the error path in rdma_start_incoming_migration(), this patch fix that. The leak stack: Direct leak of 2 byte(s) in 1 object(s) allocated from: #0 0x7fb7add18ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8) #1 0x7fb7ad0df1d5 in g_malloc (/lib64/libglib-2.0.so.0+0x531d5) #2 0x7fb7ad0f8b32 in g_strdup (/lib64/libglib-2.0.so.0+0x6cb32) #3 0x55a0464a0f6f in qemu_rdma_data_init /mnt/sdb/qemu/migration/rdma.c:2647 #4 0x55a0464b0e76 in rdma_start_incoming_migration /mnt/sdb/qemu/migration/rdma.c:4020 #5 0x55a0463f898a in qemu_start_incoming_migration /mnt/sdb/qemu/migration/migration.c:365 #6 0x55a0458c75d3 in qemu_init /mnt/sdb/qemu/softmmu/vl.c:4438 #7 0x55a046a3d811 in main /mnt/sdb/qemu/softmmu/main.c:48 #8 0x7fb7a8417872 in __libc_start_main (/lib64/libc.so.6+0x23872) #9 0x55a04536b26d in _start (/mnt/sdb/qemu/build/x86_64-softmmu/qemu-system-x86_64+0x286926d) Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200420102727.17339-1-pannengyuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/ram: Consolidate variable reset after placement in ram_load_postcopy()David Hildenbrand
Let's consolidate resetting the variables. Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200421085300.7734-10-david@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup for context conflicts with 91ba442
2020-05-07migration/throttle: Add cpu-throttle-tailslow migration parameterKeqian Zhu
At the tail stage of throttling, the Guest is very sensitive to CPU percentage while the @cpu-throttle-increment is excessive usually at tail stage. If this parameter is true, we will compute the ideal CPU percentage used by the Guest, which may exactly make the dirty rate match the dirty rate threshold. Then we will choose a smaller throttle increment between the one specified by @cpu-throttle-increment and the one generated by ideal CPU percentage. Therefore, it is compatible to traditional throttling, meanwhile the throttle increment won't be excessive at tail stage. This may make migration time longer, and is disabled by default. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/colo: Add missing error-propagation codePhilippe Mathieu-Daudé
Running the coccinelle script produced: $ spatch \ --macro-file scripts/cocci-macro-file.h --include-headers \ --sp-file scripts/coccinelle/find-missing-error_propagate.cocci \ --keep-comments --smpl-spacing --dir . HANDLING: ./migration/colo.c [[manual check required: error_propagate() might be missing in migrate_set_block_enabled() ./migration/colo.c:439:4]] Add the missing error_propagate() after review. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200413205250.687-1-f4bug@amsat.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration: move the units of migrate parameters from milliseconds to msMao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <474bb6cf67defb8be9de5035c11aee57a680557a.1585641083.git.maozhongyi@cmss.chinamobile.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/migration: improve error reporting for migrate parametersMao Zhongyi
use QERR_INVALID_PARAMETER_VALUE instead of "Parameter '%s' expects" for consistency. Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <4ce71da4a5f98ad6ead0806ec71043473dcb4c07.1585641083.git.maozhongyi@cmss.chinamobile.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration: fix bad indentation in error_report()Mao Zhongyi
bad indentation conflicts with CODING_STYLE doc. Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <09f7529c665cac0c6a5e032ac6fdb6ca701f7e37.1585329482.git.maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-05Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging trivial patches (20200504) Silent static analyzer warning Remove dead assignments Support -chardev serial on macOS Update MAINTAINERS Some cosmetic changes # gpg: Signature made Mon 04 May 2020 16:45:18 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.1-pull-request: hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning hw/timer/stm32f2xx_timer: Remove dead assignment hw/gpio/aspeed_gpio: Remove dead assignment hw/isa/i82378: Remove dead assignment hw/ide/sii3112: Remove dead assignment hw/input/adb-kbd: Remove dead assignment hw/i2c/pm_smbus: Remove dead assignment blockdev: Remove dead assignment block: Avoid dead assignment Compress lines for immediate return chardev: Add macOS to list of OSes that support -chardev serial MAINTAINERS: Update Keith Busch's email address elf_ops: Don't try to g_mapped_file_unref(NULL) hw/mem/pc-dimm: Fix line over 80 characters warning hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug() MAINTAINERS: Mark the LatticeMico32 target as orphan timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write() display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32() scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04lockable: replaced locks with lock guard macros where appropriateDaniel Brodsky
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets - replaced result with QEMU_LOCK_GUARD if all unlocks at function end - replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-05-04Compress lines for immediate returnSimran Singhal
Compress two lines into a single line if immediate return statement is found. It also remove variables progress, val, data, ret and sock as they are no longer needed. Remove space between function "mixer_load" and '(' to fix the checkpatch.pl error:- ERROR: space prohibited between function name and open parenthesis '(' Done using following coccinelle script: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200401165314.GA3213@simran-Inspiron-5558> [lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-04-29migration/colo: Fix qmp_xen_colo_do_checkpoint() error handlingMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. qmp_xen_colo_do_checkpoint() passes @errp first to replication_do_checkpoint_all(), and then to colo_notify_filters_event(). If both fail, this will trip the assertion in error_setv(). Similar code in secondary_vm_do_failover() calls colo_notify_filters_event() only after replication_do_checkpoint_all() succeeded. Do the same here. Fixes: 0e8818f023616677416840d6ddc880db8de3c967 Cc: Zhang Chen <chen.zhang@intel.com> Cc: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Message-Id: <20200422130719.28225-12-armbru@redhat.com>
2020-04-02migration: fix cleanup_bh leak on resumeMarc-André Lureau
Since commit 8c6b0356b53977bcfdea5299db07884915425b0c ("util/async: make bh_aio_poll() O(1)"), migration-test reveals a leak: QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/qtest/migration-test -p /x86_64/migration/postcopy/recovery tests/qtest/libqtest.c:140: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0) ================================================================= ==2082571==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f25971dfc58 in __interceptor_malloc (/lib64/libasan.so.5+0x10dc58) #1 0x7f2596d08358 in g_malloc (/lib64/libglib-2.0.so.0+0x57358) #2 0x560970d006f8 in qemu_bh_new /home/elmarco/src/qemu/util/main-loop.c:532 #3 0x5609704afa02 in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:3407 #4 0x5609704b6b6f in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:92 #5 0x5609704b2bfb in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:108 #6 0x560970b9bd6c in qio_task_complete /home/elmarco/src/qemu/io/task.c:196 #7 0x560970b9aa97 in qio_task_thread_result /home/elmarco/src/qemu/io/task.c:111 #8 0x7f2596cfee3a (/lib64/libglib-2.0.so.0+0x4de3a) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200325184723.2029630-2-marcandre.lureau@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-25migration: use "" instead of (null) for tls-authzMao Zhongyi
run: (qemu) info migrate_parameters announce-initial: 50 ms ... announce-max: 550 ms multifd-compression: none xbzrle-cache-size: 4194304 max-postcopy-bandwidth: 0 tls-authz: '(null)' Migration parameter 'tls-authz' is used to provide the QOM ID of a QAuthZ subclass instance that provides the access control check, default is NULL. But the empty string is not a valid object ID, so use "" instead of the default. Although it will fail when lookup an object with ID "", it is harmless, just consistent with tls_creds. As a bonus, this patch also fixed the bad indentation on the last line and removed 'has_tls_authz' redundant check in 'hmp_info_migrate_parameters'. Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <119f539a9f4d198bc3bcced46b8280520d60bc51.1585100802.git.maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25migration/ram: fix use after free of local_errVladimir Sementsov-Ogievskiy
local_err is used again in migration_bitmap_sync_precopy() after precopy_notify(), so we must zero it. Otherwise try to set non-NULL local_err will crash. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200324153630.11882-6-vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25migration/colo: fix use after free of local_errVladimir Sementsov-Ogievskiy
local_err is used again in secondary_vm_do_failover() after replication_stop_all(), so we must zero it. Otherwise try to set non-NULL local_err will crash. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200324153630.11882-5-vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25xbzrle: update xbzrle docMao Zhongyi
Add new parameter description, also: 1. Remove unsociable space. 2. Nit picking: s/two/2 in report Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-13migration: recognize COLO as part of activating processzhanghailiang
We will migrate parts of dirty pages backgroud lively during the gap time of two checkpoints, without this modification, it will not work because ram_save_iterate() will check it before send RAM_SAVE_FLAG_EOS at the end of it. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Message-Id: <20200224065414.36524-7-zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-13ram/colo: only record bitmap of dirty pages in COLO stagezhanghailiang
It is only need to record bitmap of dirty pages while goes into COLO stage. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Message-Id: <20200224065414.36524-6-zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-13COLO: Optimize memory back-up processzhanghailiang
This patch will reduce the downtime of VM for the initial process, Previously, we copied all these memory in preparing stage of COLO while we need to stop VM, which is a time-consuming process. Here we optimize it by a trick, back-up every page while in migration process while COLO is enabled, though it affects the speed of the migration, but it obviously reduce the downtime of back-up all SVM'S memory in COLO preparing stage. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Message-Id: <20200224065414.36524-5-zhang.zhanghailiang@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> minor typo fixes
2020-03-13migration/throttle: Add throttle-trig-thres migration parameterKeqian Zhu
Currently, if the bytes_dirty_period is more than the 50% of bytes_xfer_period, we start or increase throttling. If we make this percentage higher, then we can tolerate higher dirty rate during migration, which means less impact on guest. The side effect of higher percentage is longer migration time. We can make this parameter configurable to switch between mig- ration time first or guest performance first. The default value is 50 and valid range is 1 to 100. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28savevm: Don't call colo_init_ram_cache twicezhanghailiang
This helper has been called twice which is wrong. Left the one where called while get COLO enable message from source side. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-28migration/colo: wrap incoming checkpoint process into new helperzhanghailiang
Split checkpoint incoming process into a helper. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-28migration: fix COLO broken caused by a previous commitzhanghailiang
This commit "migration: Create migration_is_running()" broke COLO. Becuase there is a process broken by this commit. colo_process_checkpoint ->colo_do_checkpoint_transaction ->migrate_set_block_enabled ->qmp_migrate_set_capabilities It can be fixed by make COLO process as an exception, Maybe we need a better way to fix it. Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-28migration/block: rename BLOCK_SIZE macroStefan Hajnoczi
Both <linux/fs.h> and <sys/mount.h> define BLOCK_SIZE macros. Avoiding using that name in block/migration.c. I noticed this when including <liburing.h> (Linux io_uring) from "block/aio.h" and compilation failed. Although patches adding that include haven't been sent yet, it makes sense to rename the macro now in case someone else stumbles on it in the meantime. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-28migration/savevm: release gslist after dump_vmstate_jsonPan Nengyuan
'list' forgot to free at the end of dump_vmstate_json_to_file(), although it's called only once, but seems like a clean code. Fix the leak as follow: Direct leak of 16 byte(s) in 1 object(s) allocated from: #0 0x7fb946abd768 in __interceptor_malloc (/lib64/libasan.so.5+0xef768) #1 0x7fb945eca445 in g_malloc (/lib64/libglib-2.0.so.0+0x52445) #2 0x7fb945ee2066 in g_slice_alloc (/lib64/libglib-2.0.so.0+0x6a066) #3 0x7fb945ee3139 in g_slist_prepend (/lib64/libglib-2.0.so.0+0x6b139) #4 0x5585db591581 in object_class_get_list_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1084 #5 0x5585db590f66 in object_class_foreach_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1028 #6 0x7fb945eb35f7 in g_hash_table_foreach (/lib64/libglib-2.0.so.0+0x3b5f7) #7 0x5585db59110c in object_class_foreach /mnt/sdb/qemu-new/qemu/qom/object.c:1038 #8 0x5585db5916b6 in object_class_get_list /mnt/sdb/qemu-new/qemu/qom/object.c:1092 #9 0x5585db335ca0 in dump_vmstate_json_to_file /mnt/sdb/qemu-new/qemu/migration/savevm.c:638 #10 0x5585daa5bcbf in main /mnt/sdb/qemu-new/qemu/vl.c:4420 #11 0x7fb941204812 in __libc_start_main ../csu/libc-start.c:308 #12 0x5585da29420d in _start (/mnt/sdb/qemu-new/qemu/build/x86_64-softmmu/qemu-system-x86_64+0x27f020d) Indirect leak of 7472 byte(s) in 467 object(s) allocated from: #0 0x7fb946abd768 in __interceptor_malloc (/lib64/libasan.so.5+0xef768) #1 0x7fb945eca445 in g_malloc (/lib64/libglib-2.0.so.0+0x52445) #2 0x7fb945ee2066 in g_slice_alloc (/lib64/libglib-2.0.so.0+0x6a066) #3 0x7fb945ee3139 in g_slist_prepend (/lib64/libglib-2.0.so.0+0x6b139) #4 0x5585db591581 in object_class_get_list_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1084 #5 0x5585db590f66 in object_class_foreach_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1028 #6 0x7fb945eb35f7 in g_hash_table_foreach (/lib64/libglib-2.0.so.0+0x3b5f7) #7 0x5585db59110c in object_class_foreach /mnt/sdb/qemu-new/qemu/qom/object.c:1038 #8 0x5585db5916b6 in object_class_get_list /mnt/sdb/qemu-new/qemu/qom/object.c:1092 #9 0x5585db335ca0 in dump_vmstate_json_to_file /mnt/sdb/qemu-new/qemu/migration/savevm.c:638 #10 0x5585daa5bcbf in main /mnt/sdb/qemu-new/qemu/vl.c:4420 #11 0x7fb941204812 in __libc_start_main ../csu/libc-start.c:308 #12 0x5585da29420d in _start (/mnt/sdb/qemu-new/qemu/build/x86_64-softmmu/qemu-system-x86_64+0x27f020d) Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-28migration/vmstate: Remove redundant statement in vmstate_save_state_v()Chen Qun
The "ret" has been assigned in all branches. It didn't need to be assigned separately. Clang static code analyzer show warning: migration/vmstate.c:365:17: warning: Value stored to 'ret' is never read ret = 0; ^ ~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-28multifd: Add zstd compression multifd supportJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-zstd-level parameterJuan Quintela
This parameter specifies the zstd compression level. The next patch will put it to use. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2020-02-28multifd: Add zlib compression multifd supportJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-zlib-level parameterJuan Quintela
This parameter specifies the zlib compression level. The next patch will put it to use. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Make no compression operations into its own structureJuan Quintela
It will be used later. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> --- No comp value needs to be zero.
2020-02-28multifd: Add multifd-compression parameterJuan Quintela
This will store the compression method to use. We start with none. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> --- Rename multifd-method to multifd-compression
2020-02-13migration/rdma: rdma_accept_incoming_migration fix error handlingDr. David Alan Gilbert
rdma_accept_incoming_migration is called from an fd handler and can't return an Error * anywhere. Currently it's leaking Error's in errp/local_err - there's no point putting them in there unless we can report them. Turn most into fprintf's, and the last into an error_reportf_err where it's coming up from another function. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-13migration: Optimization about wait-unplug migration stateKeqian Zhu
qemu_savevm_nr_failover_devices() is originally designed to get the number of failover devices, but it actually returns the number of "unplug-pending" failover devices now. Moreover, what drives migration state to wait-unplug should be the number of "unplug-pending" failover devices, not all failover devices. We can also notice that qemu_savevm_state_guest_unplug_pending() and qemu_savevm_nr_failover_devices() is equivalent almost (from the code view). So the latter is incorrect semantically and useless, just delete it. In the qemu_savevm_state_guest_unplug_pending(), once hit a unplug-pending failover device, then it can return true right now to save cpu time. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-13migration: Maybe VM is paused when migration is cancelledZhimin Feng
If the migration is cancelled when it is in the completion phase, the migration state is set to MIGRATION_STATUS_CANCELLING. The VM maybe wait for the 'pause_sem' semaphore in migration_maybe_pause function, so that VM always is paused. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Zhimin Feng <fengzhimin1@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>