aboutsummaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)Author
2017-10-23migration: Improve migration thread error handlingJuan Quintela
We now report errors also when we finish migration, not only on info migrate. We plan to use this error from several places, and we want the first error to happen to win, so we add an mutex to order it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-23migration: add bitmap for received pageAlexey Perevalov
This patch adds ability to track down already received pages, it's necessary for calculation vCPU block time in postcopy migration feature, and for recovery after postcopy migration failure. Also it's necessary to solve shared memory issue in postcopy livemigration. Information about received pages will be transferred to the software virtual bridge (e.g. OVS-VSWITCHD), to avoid fallocate (unmap) for already received pages. fallocate syscall is required for remmaped shared memory, due to remmaping itself blocks ioctl(UFFDIO_COPY, ioctl in this case will end with EEXIT error (struct page is exists after remmap). Bitmap is placed into RAMBlock as another postcopy/precopy related bitmaps. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: introduce qemu_ufd_copy_ioctl helperAlexey Perevalov
Just for placing auxilary operations inside helper, auxilary operations like: track received pages, notify about copying operation in futher patches. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: postcopy_place_page factoring outAlexey Perevalov
Need to mark copied pages as closer as possible to the place where it tracks down. That will be necessary in futher patch. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: new ram_init_bitmaps()Peter Xu
Rearrange the bitmap initialization and the first sync. Since at it, make sure the locks are taken/released in correct order (I moved RCU unlock upper - though it may not affect much). Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: clean up xbzrle cache init/destroyPeter Xu
Let's further simplify ram_init_all() and ram_save_cleanup() by abstract all the XBZRLE related codes into their own functions. When allocating xbzrle cache, we are always very careful on -ENOMEM; which makes sense. Replacing the last g_malloc0() with g_try_malloc0(), then refactor the logic a bit. This patch should be fixing some memory leaks when some memory allocation failed for XBZRLE in the past. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: provide ram_state_cleanupPeter Xu
There are two Mutexes that are created but not yet destroyed for RAMState. Fix that. Since we are at it, provide helper function to clean up RAMState. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: provide ram_state_init()Peter Xu
The old ram_state_init() is not really initializing the RAMState only, but including lots of other stuff that is RAM-related. Renaming it to ram_init_all(). Instead, provide a real ram_state_init(). Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: pause-before-switchover for postcopyDr. David Alan Gilbert
Add pause-before-switchover support for postcopy. After starting postcopy it will transition active->pre-switchover->postcopy_active Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: allow cancel to unpauseDr. David Alan Gilbert
If a migration_cancel is issued during the new paused state, kick the pause_sem to get to unpause so it can cancel. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: migrate-continueDr. David Alan Gilbert
A new qmp command allows the caller to continue from a given paused state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: Wait for semaphore before completing migrationDr. David Alan Gilbert
Wait for a semaphore before completing the migration, if the previously added capability was enabled. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: Add 'pre-switchover' and 'device' statusesDr. David Alan Gilbert
Add two statuses for use when the 'pause-before-switchover' capability is enabled. 'pre-switchover' is the state that we wait in for management to allow us to continue. 'device' is the state we enter while serialising the devices after management gives us the OK. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: Add 'pause-before-switchover' capabilityDr. David Alan Gilbert
When 'pause-before-switchover' is enabled, the outgoing migration will pause before invalidating the block devices and serializing the device state. At this point the management layer gets the chance to clean up any device jobs or other device users before the migration completes. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: Make cache_init() take an error parameterJuan Quintela
Once there, take a total size instead of the size of the pages. We move the check that the new_size is bigger than one page from xbzrle_cache_resize(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Fix typo spotted by Peter Xu
2017-10-23migration: Move xbzrle cache resize error handling to xbzrle_cache_resizeJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-10-23migration: Make cache size elements use the right typesJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-23migratiom: Remove max_item_age parameterJuan Quintela
It was not used at all since commit: 27af7d6ea5015e5ef1f7985eab94a8a218267a2b which replaced its use by the dirty sync count. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-10-23migration: Fix migrate_test_apply for multifd parametersJuan Quintela
They were missing when introduced on the tree Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-10-06dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytesEric Blake
Some of the callers were already scaling bytes to sectors; others can be easily converted to pass byte offsets, all in our shift towards a consistent byte interface everywhere. Making the change will also make it easier to write the hold-out callers to use byte rather than sectors for their iterations; it also makes it easier for a future dirty-bitmap patch to offload scaling over to the internal hbitmap. Although all callers happen to pass sector-aligned values, make the internal scaling robust to any sub-sector requests. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-06dirty-bitmap: Change bdrv_get_dirty_locked() to take bytesEric Blake
Half the callers were already scaling bytes to sectors; the other half can eventually be simplified to use byte iteration. Both callers were already using the result as a bool, so make that explicit. Making the change also makes it easier for a future dirty-bitmap patch to offload scaling over to the internal hbitmap. Remember, asking whether a byte is dirty is effectively asking whether the entire granularity containing the byte is dirty, since we only track dirtiness by granularity. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-06dirty-bitmap: Change bdrv_get_dirty_count() to report bytesEric Blake
Thanks to recent cleanups, all callers were scaling a return value of sectors into bytes; do the scaling internally instead. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-27migration: Route more error pathsDr. David Alan Gilbert
vmstate_save_state is called in lots of places. Route error returns from the easier cases back up; there are lots of more complex cases where their own error paths need fixing. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-7-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Commit message fix up as Peter's review
2017-09-27migration: Route errors up through vmstate_saveDr. David Alan Gilbert
Route the errors from vsmtate_save_state back up through vmstate_save and out to the normal device state path. That's the normal error path done. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-6-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27migration: wire vmstate_save_state errors up to vmstate_subsection_saveDr. David Alan Gilbert
Route the errors from vmstate_save_state up through vmstate_subsection_save (and back down, all rather recursive). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-5-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Commit message fixed up as per Peter's review
2017-09-27migration: Check field save returnsDr. David Alan Gilbert
Check the return values from vmstate_save_state for fields and also the return values from 'put' for fields that use that. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-4-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27migration: check pre_save return in vmstate_save_stateDr. David Alan Gilbert
Check the return value of pre_save state and fail vmstate_save_state if the pre_save failed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-3-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27migration: pre_save return intDr. David Alan Gilbert
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27migration: disable auto-converge during bulk block migrationPeter Lieven
auto-converge and block migration currently do not play well together. During block migration the auto-converge logic detects that ram migration makes no progress and thus throttles down the vm until it nearly stalls completely. Avoid this by disabling the throttling logic during the bulk phase of the block migration. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1506421996-12513-1-git-send-email-pl@kamp.de> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-22migration: split ufd_version_check onto receive/request features partAlexey Perevalov
This modification is necessary for userfault fd features which are required to be requested from userspace. UFFD_FEATURE_THREAD_ID is a one of such "on demand" feature, which will be introduced in the next patch. QEMU have to use separate userfault file descriptor, due to userfault context has internal state, and after first call of ioctl UFFD_API it changes its state to UFFD_STATE_RUNNING (in case of success), but kernel while handling ioctl UFFD_API expects UFFD_STATE_WAIT_API. So only one ioctl with UFFD_API is possible per ufd. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: fix hardcoded function name in error reportAlexey Perevalov
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: pass MigrationIncomingState* into migration check functionsAlexey Perevalov
That tiny refactoring is necessary to be able to set UFFD_FEATURE_THREAD_ID while requesting features, and then to create downtime context in case when kernel supports it. Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: split common postcopy out of ram postcopyVladimir Sementsov-Ogievskiy
Split common postcopy staff from ram postcopy staff. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: fix ram_save_pendingVladimir Sementsov-Ogievskiy
Fill postcopy-able pending only if ram postcopy is enabled. It is necessary because of there will be other postcopy-able states and when ram postcopy is disabled, it should not spoil common postcopy related pending. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: add has_postcopy savevm handlerVladimir Sementsov-Ogievskiy
Now postcopy-able states are recognized by not NULL save_live_complete_postcopy handler. But when we have several different postcopy-able states, it is not convenient. Ram postcopy may be disabled, while some other postcopy enabled, in this case Ram state should behave as it is not postcopy-able. This patch add separate has_postcopy handler to specify behaviour of savevm state. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: Split migration_fd_process_incomingJuan Quintela
We need that on later patches. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-22migration: Create multifd migration threadsJuan Quintela
Creation of the threads, nothing inside yet. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- Use pointers instead of long array names Move to use semaphores instead of conditions as paolo suggestion Put all the state inside one struct. Use a counter for the number of threads created. Needed during cancellation. Add error return to thread creation Add id field Rename functions to multifd_save/load_setup/cleanup Change recv parameters to a pointer to struct Change back to a struct Use Error * for _cleanup
2017-09-22migration: Create x-multifd-page-count parameterJuan Quintela
Indicates how many pages we are going to send in each batch to a multifd thread. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Be consistent with defaults and documentation Use new DEFINE_PROP_* Rename x-multifd-group to x-multifd-page-count
2017-09-22migration: Create x-multifd-channels parameterJuan Quintela
Indicates the number of channels that we will create. By default we create 2 channels. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Catch inconsistent defaults (eric). Improve comment stating that number of threads is the same than number of sockets Use new DEFIN_PROP_* Rename x-multifd-threads to x-multifd-threads
2017-09-22migration: Add multifd capabilityJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> -- Use new DEFINE_PROP
2017-09-22migration: Create migration_has_all_channelsJuan Quintela
This function allows us to decide when to close the listener socket. For now, we only need one connection. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-22migration: Add comments to channel functionsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-22migration: Teach it about G_SOURCE_REMOVEJuan Quintela
As this is defined on glib 2.32, add compatibility macros for older glibs. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-09-22migration: Create migration_ioc_process_incoming()Juan Quintela
We pass the ioc instead of the fd. This will allow us to have more than one channel open. We also make sure that we set the from_src_file sooner, so we don't need to pass it as a parameter. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> -- Do not assing mis->from_src_file (peterxu)
2017-09-22buildsys: Move rdma libs to per objectFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170907084230.26493-1-famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-06migration: dump str in migrate_set_state tracePeter Xu
Strings are more readable for debugging. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1504081950-2528-5-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixed up merge with 977c73
2017-09-06migration: Reset rather than destroy main_thread_load_eventDr. David Alan Gilbert
migration_incoming_state_destroy doesn't really destroy, it cleans up. After a loadvm it's called, but the loadvm command can be run twice, and so destroying an init-once mutex breaks on the second loadvm. Reported-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170825141940.20740-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-06xbzrle: Drop unused cache_resize()Markus Armbruster
Unused since commit fd8cec XBZRLE: Fix qemu crash when resize the xbzrle cache. Cc: Juan Quintela <quintela@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1501148776-16890-2-git-send-email-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-06migration: Report when bdrv_inactivate_all failsDr. David Alan Gilbert
If the bdrv_inactivate_all fails near the end of the migration, the migration will fail and often the only diagnostics in the log are an I/O error which you can't distinguish from an error on the socket connection. Add an error so we know when it's actually a block problem. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170822170212.27347-1-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-04qapi: Change data type of the FOO_lookup generated for enum FOOMarc-André Lureau
Currently, a FOO_lookup is an array of strings terminated by a NULL sentinel. A future patch will generate enums with "holes". NULL-termination will cease to work then. To prepare for that, store the length in the FOO_lookup by wrapping it in a struct and adding a member for the length. The sentinel will be dropped next. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com> [Basically redone] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com> [Rebased]
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-02 03:10:38 +0000