aboutsummaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)Author
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10migration, vl: start migration via qmp_migrate_incomingPaolo Bonzini
Make qemu_start_incoming_migration local to migration/migration.c. By using the runstate instead of a separate flag, vl need not do anything to setup deferred incoming migration. qmp_migrate_incoming also does not need the deferred_incoming flag anymore, because "-incoming PROTOCOL" will clear the "once" flag before the main loop starts. Therefore, later invocations of the migrate-incoming command will fail with the existing "The incoming migration has already been started" error message. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10vl: move various initialization routines out of qemu_initPaolo Bonzini
Some very simple initialization routines can be nested in existing subsystem-level functions, do that to simplify qemu_init. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-15migration: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023123130.19656-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-12migration: handle CANCELLING state in migration_completion()Longpeng(Mike)
The following sequence may cause the VM abort during migration: 1. RUN_STATE_RUNNING,MIGRATION_STATUS_ACTIVE 2. before call migration_completion(), we send migrate_cancel QMP command, the state machine is changed to: RUN_STATE_RUNNING,MIGRATION_STATUS_CANCELLING 3. call migration_completion(), and the state machine is switch to: RUN_STATE_RUNNING,MIGRATION_STATUS_COMPLETED 4. call migration_iteration_finish(), because the migration status is COMPLETED, so it will try to set the runstate to POSTMIGRATE, but RUNNING-->POSTMIGRATE is an invalid transition, so abort(). The migration_completion() should not change the migration state to COMPLETED if it is already changed to CANCELLING. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Message-Id: <20201105091726.148-1-longpeng2@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12multifd/tls: fix memoryleak of the QIOChannelSocket object when cancelling ↵Chuan Zheng
migration When creating new tls client, the tioc->master will be referenced which results in socket leaking after multifd_save_cleanup if we cancel migration. Fix it by do object_unref() after tls client creation. Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Message-Id: <1605104763-118687-1-git-send-email-zhengchuan@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12migration/dirtyrate: simplify includes in dirtyrate.cChuan Zheng
Remove redundant blank line which is left by Commit 662770af7c6e8c, also take this opportunity to remove redundant includes in dirtyrate.c. Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Message-Id: <1604030281-112946-1-git-send-email-zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12migration: fix uninitialized variable warning in migrate_send_rp_req_pages()Chen Qun
After the WITH_QEMU_LOCK_GUARD macro is added, the compiler cannot identify that the statements in the macro must be executed. As a result, some variables assignment statements in the macro may be considered as unexecuted by the compiler. When the -Wmaybe-uninitialized capability is enabled on GCC9,the compiler showed warning: migration/migration.c: In function ‘migrate_send_rp_req_pages’: migration/migration.c:384:8: warning: ‘received’ may be used uninitialized in this function [-Wmaybe-uninitialized] 384 | if (received) { | ^ Add a default value for 'received' to prevented the warning. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201111142203.2359370-6-kuhn.chenqun@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12migration/multifd: fix hangup with TLS-Multifd due to blocking handshakeChuan Zheng
The qemu main loop could hang up forever when we enable TLS+Multifd. The Src multifd_send_0 invokes tls handshake, it sends hello to sever and wait response. However, the Dst main qemu loop has been waiting recvmsg() for multifd_recv_1. Both of Src and Dst main qemu loop are blocking and waiting for reponse which results in hanging up forever. Src: (multifd_send_0) Dst: (multifd_recv_1) multifd_channel_connect migration_channel_process_incoming multifd_tls_channel_connect migration_tls_channel_process_incoming multifd_tls_channel_connect qio_channel_tls_handshake_task qio_channel_tls_handshake gnutls_handshake qio_channel_tls_handshake_task ... qcrypto_tls_session_handshake ... gnutls_handshake ... ... ... recvmsg (Blocking I/O waiting for response) recvmsg (Blocking I/O waiting for response) Fix this by offloadinig handshake work to a background thread. Reported-by: Yan Jin <jinyan12@huawei.com> Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Message-Id: <1604643893-8223-1-git-send-email-zhengchuan@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12migration/ram: Fix hexadecimal format string specifierPhilippe Mathieu-Daudé
The '%u' conversion specifier is for decimal notation. When prefixing a format with '0x', we want the hexadecimal specifier ('%x'). Inspired-by: Dov Murik <dovmurik@linux.vnet.ibm.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20201103112558.2554390-5-philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-11Reduce the time of checkpoint for COLORao, Lei
we should set ram_bulk_stage to false after ram_state_init, otherwise the bitmap will be unused in migration_bitmap_find_dirty. all pages in ram cache will be flushed to the ram of secondary guest for each checkpoint. Signed-off-by: Lei Rao <lei.rao@intel.com> Signed-off-by: Derek Su <dereksu@qnap.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-02migration: Postpone the kick of the fault thread after recoverPeter Xu
The new migrate_send_rp_req_pages_pending() call should greatly improve destination responsiveness because it will resync faulted address after postcopy recovery. However it is also the 1st place to initiate the page request from the main thread. One thing is overlooked on that migrate_send_rp_message_req_pages() is not designed to be thread-safe. So if we wake the fault thread before syncing all the faulted pages in the main thread, it means they can race. Postpone the wake up operation after the sync of faulted addresses. Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery") Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201102153010.11979-3-peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02migration: Unify reset of last_rb on destination node when recoverPeter Xu
When postcopy recover happens, we need to reset last_rb after each return of postcopy_pause_fault_thread() because that means we just got the postcopy migration continued. Unify this reset to the place right before we want to kick the fault thread again, when we get the command MIG_CMD_POSTCOPY_RESUME from source. This is actually more than that - because the main thread on destination will now be able to call migrate_send_rp_req_pages_pending() too, so the fault thread is not the only user of last_rb now. Move the reset earlier will allow the first call to migrate_send_rp_req_pages_pending() to use the reset value even if called from the main thread. (NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just a mark that when picking up 0c26781c09 we'd better have this one too; the real fix will come later) Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery") Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20201102153010.11979-2-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-01qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede
Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-27Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20201026a' into staging migration pull: 2020-10-26 Another go at Peter's postcopy fixes Cleanups from Bihong Yu and Peter Maydell. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20201026a: migration-test: Only hide error if !QTEST_LOG migration/postcopy: Release fd before going into 'postcopy-pause' migration: Sync requested pages after postcopy recovery migration: Maintain postcopy faulted addresses migration: Introduce migrate_send_rp_message_req_pages() migration: Pass incoming state into qemu_ufd_copy_ioctl() migration: using trace_ to replace DPRINTF migration: Delete redundant spaces migration: Open brace '{' following function declarations go on the next line migration: Do not initialise statics and globals to 0 or NULL migration: Add braces {} for if statement migration: Open brace '{' following struct go on the same line migration: Add spaces around operator migration: Don't use '#' flag of printf format migration: Do not use C99 // comments migration: Drop unused VMSTATE_FLOAT64 support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-26Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-10-26' ↵Peter Maydell
into staging bitmaps patches for 2020-10-26 - fix infloop on large bitmap granularity - silence compiler warning # gpg: Signature made Mon 26 Oct 2020 11:56:54 GMT # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-bitmaps-2020-10-26: migration/block-dirty-bitmap: fix uninitialized variable warning migration/block-dirty-bitmap: fix larger granularity bitmaps Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-26migration/postcopy: Release fd before going into 'postcopy-pause'Peter Xu
Logically below race could trigger with the old code: test program migration thread ------------ ---------------- wait_until('postcopy-pause') postcopy_pause() set_state('postcopy-pause') do_postcopy_recover() arm s->to_dst_file with new fd release s->to_dst_file [1] Here [1] could have released the just-installed recoverying channel. Then the migration could hang without really resuming. Instead, it should be very safe to release the fd before setting the state into 'postcopy-pause', because there's no reason for any other thread to touch it during 'postcopy-active'. Dave reported a very rare postcopy recovery hang that the migration-test program waited for the migration to complete in migrate_postcopy_complete(). We do suspect it's the same thing that we're gonna fix here. Hard to tell. However since we've noticed this, fix this irrelevant of the hang report. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201021212721.440373-6-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Sync requested pages after postcopy recoveryPeter Xu
We synchronize the requested pages right after a postcopy recovery happens. This helps to synchronize the prioritized pages on source so that the faulted threads can be served faster. Reported-by: Xiaohui Li <xiaohli@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201021212721.440373-5-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Maintain postcopy faulted addressesPeter Xu
Maintain a list of faulted addresses on the destination host for which we're waiting on. This is implemented using a GTree rather than a real list to make sure even there're plenty of vCPUs/threads that are faulting, the lookup will still be fast with O(log(N)) (because we'll do that after placing each page). It should bring a slight overhead, but ideally that shouldn't be a big problem simply because in most cases the requested page list will be short. Actually we did similar things for postcopy blocktime measurements. This patch didn't use that simply because: (1) blocktime measurement is towards vcpu threads only, but here we need to record all faulted addresses, including main thread and external thread (like, DPDK via vhost-user). (2) blocktime measurement will require UFFD_FEATURE_THREAD_ID, but here we don't want to add that extra dependency on the kernel version since not necessary. E.g., we don't need to know which thread faulted on which page, we also don't care about multiple threads faulting on the same page. But we only care about what addresses are faulted so waiting for a page copying from src. (3) blocktime measurement is not enabled by default. However we need this by default especially for postcopy recover. Another thing to mention is that this patch introduced a new mutex to serialize the receivedmap and the page_requested tree, however that serialization does not cover other procedures like UFFDIO_COPY. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201021212721.440373-4-peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Introduce migrate_send_rp_message_req_pages()Peter Xu
This is another layer wrapper for sending a page request to the source VM. The new migrate_send_rp_message_req_pages() will be used elsewhere in coming patches. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201021212721.440373-3-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Pass incoming state into qemu_ufd_copy_ioctl()Peter Xu
It'll be used in follow up patches to access more fields out of it. Meanwhile fetch the userfaultfd inside the function. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201021212721.440373-2-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: using trace_ to replace DPRINTFBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Message-Id: <1603179176-5360-1-git-send-email-yubihong@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Delete redundant spacesBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1603163448-27122-9-git-send-email-yubihong@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Open brace '{' following function declarations go on the next lineBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1603163448-27122-8-git-send-email-yubihong@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Do not initialise statics and globals to 0 or NULLBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1603163448-27122-7-git-send-email-yubihong@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Add braces {} for if statementBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1603163448-27122-6-git-send-email-yubihong@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Open brace '{' following struct go on the same lineBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1603163448-27122-5-git-send-email-yubihong@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Add spaces around operatorBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1603163448-27122-4-git-send-email-yubihong@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Don't use '#' flag of printf formatBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1603163448-27122-3-git-send-email-yubihong@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Do not use C99 // commentsBihong Yu
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1603163448-27122-2-git-send-email-yubihong@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Drop unused VMSTATE_FLOAT64 supportPeter Maydell
Commit ef96e3ae9698d6 in January 2019 removed the last user of the VMSTATE_FLOAT64* macros. These were used by targets which defined their floating point register file as an array of 'float64'. We used to try to maintain a stricter distinction between 'float64' (a type for holding an integer representing an IEEE float) and 'uint64_t', including having a debug option for 'float64' being a struct and supposedly mandatory macros for converting between float64 and uint64_t. We no longer think that's a usefully strong distinction to draw and we allow ourselves to freely assume that float64 really is just a 64-bit integer type, so for new targets we would simply recommend use of the uint64_t type for a floating point register file. The float64 type remains as a useful way of documenting in the type signature of helper functions and the like that they expect to receive an IEEE float from the TCG generated code rather than an arbitrary integer. Since the VMSTATE_FLOAT64* macros have no remaining users and we don't recommend new code uses them, delete them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20201022120830.5938-1-peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration/block-dirty-bitmap: fix uninitialized variable warningChen Qun
A default value is provided for the variable 'bitmap_name' to avoid a compiler warning. The compiler showed the warning: migration/block-dirty-bitmap.c:1090:13: warning: ‘bitmap_name’ may be used uninitialized in this function [-Wmaybe-uninitialized] g_strlcpy(s->bitmap_name, bitmap_name, sizeof(s->bitmap_name)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Message-Id: <20201014114430.1898684-1-kuhn.chenqun@huawei.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: commit message grammar tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-10-26migration/block-dirty-bitmap: fix larger granularity bitmapsStefan Reiter
sectors_per_chunk is a 64 bit integer, but the calculation is done in 32 bits, leading to an overflow for coarse bitmap granularities. If that results in the value 0, it leads to a hang where no progress is made but send_bitmap_bits is constantly called with nr_sectors being 0. Signed-off-by: Stefan Reiter <s.reiter@proxmox.com> Message-Id: <20201021144456.1072-1-s.reiter@proxmox.com> Fixes: b35ebdf07 migration: add postcopy migration of dirty bitmaps Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: Use correct type for 8ULL, use () to avoid overflow] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-10-26machine: remove deprecated -machine enforce-config-section optionPaolo Bonzini
Deprecated since 3.1 and complicates the initialization sequence, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21qapi: Restrict Xen migration commands to migration.jsonPhilippe Mathieu-Daudé
Restricting xen-set-global-dirty-log and xen-load-devices-state commands migration.json pulls slightly less QAPI-generated code into user-mode and tools. Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201012121536.3381997-6-philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-13Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Trivial Patches Pull request 20201013 # gpg: Signature made Tue 13 Oct 2020 12:49:59 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: meson.build: drop duplicate 'sparc64' entry mingw: fix error __USE_MINGW_ANSI_STDIO redefined target/sparc/int32_helper: Remove duplicated 'Tag Overflow' entry goldfish_rtc: change MemoryRegionOps endianness to DEVICE_NATIVE_ENDIAN hw/char/serial: remove duplicate .class_init in serial_mm_info block/blkdebug: fix memory leak hw/pci: Fix typo in PCI hot-plug error message softmmu/memory: Log invalid memory accesses hw/acpi/piix4: Rename piix4_pm_add_propeties() to piix4_pm_add_properties() vmdk: fix maybe uninitialized warnings tests/test-char: Use a proper fallthrough comment hw/block/nvme: Simplify timestamp sum target/i386/cpu: Update comment that mentions Texinfo qemu-img-cmds.hx: Update comment that mentions Texinfo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-13mingw: fix error __USE_MINGW_ANSI_STDIO redefinedMarc-André Lureau
Always put osdep.h first, and remove redundant stdlib.h include. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201008165953.884599-1-marcandre.lureau@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-12migration: Move the creation of the library to the main meson.buildPhilippe Mathieu-Daudé
Be consistent creating all the libraries in the main meson.build file. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201006125602.2311423-6-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-12migration/dirtyrate: present dirty rate only when querying the rate has ↵Chuan Zheng
completed Make dirty_rate field optional, present dirty rate only when querying the rate has completed. The qmp results is shown as follow: @unstarted: {"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"} @measuring: {"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"} @measured: {"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"} Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-12migration/dirtyrate: record start_time and calc_time while at the measuring ↵Chuan Zheng
state Querying could include both the start-time and the calc-time while at the measuring state, allowing a caller to determine when they should expect to come back looking for a result. Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Message-Id: <1601350938-128320-2-git-send-email-zhengchuan@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-09Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-10-09' ↵Peter Maydell
into staging Error reporting patches for 2020-10-09 # gpg: Signature made Fri 09 Oct 2020 07:45:17 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2020-10-09: error: Use error_fatal to simplify obvious fatal errors (again) error: Remove NULL checks on error_propagate() calls (again) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-09error: Remove NULL checks on error_propagate() calls (again)Markus Armbruster
Patch created mechanically by rerunning: $ spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \ --macro-file scripts/cocci-macro-file.h \ --use-gitgrep . Cc: Jens Freimann <jfreimann@redhat.com> Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200722084048.1726105-4-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-10-09monitor: Use getter/setter functions for cur_monKevin Wolf
cur_mon really needs to be coroutine-local as soon as we move monitor command handlers to coroutines and let them yield. As a first step, just remove all direct accesses to cur_mon so that we can implement this in the getter function later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-4-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-06replay: flush rr queue before loading the vmstatePavel Dovgalyuk
Non-empty record/replay queue prevents saving and loading the VM state, because it includes pending bottom halves and block coroutines. But when the new VM state is loaded, we don't have to preserve the consistency of the current state anymore. Therefore this patch just flushes the queue allowing the coroutines to finish and removes checking for empty rr queue for load_snapshot function. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <160174521762.12451.15752448887893855757.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06migration: introduce icount field for snapshotsPavel Dovgalyuk
Saving icount as a parameters of the snapshot allows navigation between them in the execution replay scenario. This information can be used for finding a specific snapshot for proceeding the recorded execution to the specific moment of the time. E.g., 'reverse step' action (introduced in one of the following patches) needs to load the nearest snapshot which is prior to the current moment of time. This patch also updates snapshot test which verifies qemu monitor output. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com> -- v4 changes: - squashed format update with test output update v7 changes: - introduced the spaces between the fields in snapshot info output - updated the test to match new field widths Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-02migration: Silence compiler warning in global_state_store_running()Thomas Huth
GCC 9.3.0 on Ubuntu complains: In file included from /usr/include/string.h:495, from /home/travis/build/huth/qemu/include/qemu/osdep.h:87, from ../migration/global_state.c:13: In function ‘strncpy’, inlined from ‘global_state_store_running’ at ../migration/global_state.c:47:5: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound 100 equals destination size [-Werror=stringop-truncation] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... but we apparently really want to do a strncpy here - the size is already checked with the assert() statement right in front of it. To silence the warning, simply replace it with our strpadcpy() function. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> (two years ago) Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200918103430.297167-4-thuth@redhat.com> Message-Id: <20200925154027.12672-5-alex.bennee@linaro.org>
2020-09-29Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20200928a' into staging Migration: Revert one patch for 068 fix One patch in the last pull broke test 068 which does a pair of vmload's. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Mon 28 Sep 2020 16:19:17 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20200928a: Revert "migration: Properly destroy variables on incoming side" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-28Revert "migration: Properly destroy variables on incoming side"Dr. David Alan Gilbert
This reverts commit c02039a6f3730ddcf683a0ba9a175688c6db71a0. This is breaking test 068 that does a loadvm twice. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-28Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Trivial Patches Pull request 20200928 # gpg: Signature made Mon 28 Sep 2020 10:15:00 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: docs/system/deprecated: Move lm32 and unicore32 to the right section migration/multifd: Remove superfluous semicolons timer: Fix timer_mod_anticipate() documentation vhost-vdpa: remove useless variable Add *.pyc back to the .gitignore file virtio: vdpa: omit check return of g_malloc meson: fix static flag summary vhost-vdpa: fix indentation in vdpa_ops Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-25migration/tls: add trace points for multifd-tlsChuan Zheng
add trace points for multifd-tls for debug. Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Signed-off-by: Yan Jin <jinyan12@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <1600139042-104593-7-git-send-email-zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 11:12:03 +0000