aboutsummaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)Author
2016-10-13migrate: move max-bandwidth and downtime-limit to migrate_set_parameterAshijeet Acharya
Mark the old commands 'migrate_set_speed' and 'migrate_set_downtime' as deprecated. Move max-bandwidth and downtime-limit into migrate-set-parameters for setting maximum migration speed and expected downtime limit parameters respectively. Change downtime units to milliseconds (only for new-command) and set its upper bound limit to 2000 seconds. Update the query part in both hmp and qmp qemu control interfaces. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration: Fix seg with missing portDr. David Alan Gilbert
The command : migrate tcp:localhost: currently segs; fix it so it now says: error parsing address 'localhost:' and the same for -incoming. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration/postcopy: Explicitly disallow huge pagesDr. David Alan Gilbert
At the moment postcopy will fail as soon as qemu tries to register userfault on the RAMBlock pages that are backed by hugepages. However, the kernel is going to get userfault support for hugepage at some point, and we've not got the rest of the QEMU code to support it yet, so fail neatly with an error like: Postcopy doesn't support hugetlbfs yet (/objects/mem1) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13Postcopy vs xbzrle: Don't send xbzrle pages once in postcopy [for 2.8]Dr. David Alan Gilbert
xbzrle relies on reading pages that have already been sent to the destination and then applying the modifications; we can't do that in postcopy because the destination may well have modified the page already or the page has been discarded. I already didn't allow reception of xbzrle pages, but I forgot to add the test to stop them being sent. Enabling both xbzrle and postcopy can make some sense; if you think that your migration might finish if you have xbzrle, then when it doesn't complete you flick over to postcopy and stop xbzrle'ing. This corresponds to RH bug: https://bugzilla.redhat.com/show_bug.cgi?id=1368422 Symptom is: Unknown combination of migration flags: 0x60 (postcopy mode) (either 0x60 or 0x40) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migrate: Fix bounds check for migration parameters in migration.cAshijeet Acharya
This patch fixes the out-of-bounds check of migration parameters in qmp_migrate_set_parameters() for cpu-throttle-initial and cpu-throttle-increment by adding a return statement for both as they were broken since their introduction in 2.5 via commit 1626fee. Due to the missing return statements, parameters were getting set to out-of-bounds values despite the error. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migrate: Use boxed qapi for migrate-set-parametersEric Blake
Now that QAPI makes it easy to pass a struct around, we don't have to declare as many parameters or local variables. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migrate: Share common MigrationParameters structEric Blake
It is rather verbose, and slightly error-prone, to repeat the same set of parameters for input (migrate-set-parameters) as for output (query-migrate-parameters), where the only difference is whether the members are optional. We can just document that the optional members will always be present on output, and then share a common struct between both commands. The next patch can then reduce the amount of code needed on input. Also, we made a mistake in qemu 2.7 of returning an empty string during 'query-migrate-parameters' when there is no TLS, rather than omitting TLS details entirely. Technically, this change risks breaking any 2.7 client that is hard-coded to expect the parameter's existence; on the other hand, clients that are portable to 2.6 already must be prepared for those members to not be present. And this gets rid of yet one more place where the QMP output visitor is silently converting a NULL string into "" (which is a hack I ultimately want to kill off). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration/rdma: Don't flag an error when we've been told about oneDr. David Alan Gilbert
If the other side tells us there's been an error and we fail the migration, we don't need to signal that failure to the other side because it already knew. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael R. Hines <michael@hinespot.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration: Make failed migration load set file errorDr. David Alan Gilbert
If an error occurs in a section load, set the file error flag so that the transport can get notified to do a cleanup. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael R. Hines <michael@hinespot.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration/rdma: Pass qemu_file errors across linkDr. David Alan Gilbert
If we fail for some reason (e.g. a mismatched RAMBlock) and it's set the qemu_file error flag, pass that error back to the peer so it can clean up rather than waiting for some higher level progress. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael R. Hines <michael@hinespot.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration: Report values for comparisonsDr. David Alan Gilbert
Report the values when a comparison fails; together with the previous patch that prints the device and field names this should give a good idea of why loading the migration failed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration: report an error giving the failed fieldDr. David Alan Gilbert
When a field fails to load (typically due to a limit check, or a call to a get/put) report the device and field to give an indication of the cause. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-09-27migration: sync all address spacesPaolo Bonzini
Migrating a VM during reboot sometimes results in differences between the source and destination in the SMRAM area. This is because migration_bitmap_sync() only fetches from KVM the dirty log of address_space_memory. SMRAM memory slots are ignored and the modifications to SMRAM are not sent to the destination. Reported-by: He Rongguang <herongguang.he@huawei.com> Reviewed-by: He Rongguang <herongguang.he@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13cutils: Export only buffer_is_zeroRichard Henderson
Since the two users don't make use of the returned offset, beyond ensuring that the entire buffer is zero, consider the can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset functions internal. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1472496380-19706-4-git-send-email-rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-11migration/socket: fix typo in file headerCao jin
Code of inet socket & unix socket is merged together. Also add some newlines, make code block well separated. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469696074-12744-4-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-11migration: fix live migration failure with compressionLiang Li
Because of commit 11808bb0c422, which remove some condition checks of 'f->ops->writev_buffer', 'qemu_put_qemu_file' should be enhanced to clear the 'f_src->iovcnt', or 'f_src->iovcnt' may exceed the MAX_IOV_SIZE which will break live migration. This should be fixed. Signed-off-by: Liang Li <liang.z.li@intel.com> Reported-by: Jinshi Zhang <jinshi.c.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1470702146-24399-1-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-11migration: mmap error check fixEvgeny Yakovlev
mmap man page: "On success, mmap() returns a pointer to the mapped area. On error, the value MAP_FAILED (that is, (void *) -1) is returned, and errno is set to indicate the cause of the error." The check in postcopy_get_tmp_page is definitely wrong and should be fixed. Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> Message-Id: <1469785705-16670-1-git-send-email-den@openvz.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-11migration/ram: fix typoCao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469776231-23820-1-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-08qjson: free strMarc-André Lureau
Release the qstring allocated in qjson_new(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-07-22migration: set state to post-migrate on failureDr. David Alan Gilbert
If a migration fails/is cancelled during the postcopy stage we currently end up with the runstate as finish-migrate, where it should be post-migrate. There's a small window in precopy where I think the same thing can happen, but I've never seen it. It rarely matters; the only postcopy case is if you restart a migration, which again is a case that rarely matters in postcopy because it's only safe to restart the migration if you know the destination hasn't been running (which you might if you started the destination with -S and hadn't got around to 'c' ing it before the postcopy failed). Even then it's a small window but potentially you could hit if there's a problem loading the devices on the destination. This corresponds to: https://bugzilla.redhat.com/show_bug.cgi?id=1355683 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1468601086-32117-1-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-07-13hmp: show all of snapshot info on every block dev in output of 'info snapshots'Lin Ma
Currently, the output of 'info snapshots' shows fully available snapshots. It's opaque, hides some snapshot information to users. It's not convenient if users want to know more about all of snapshot information on every block device via monitor. Follow Kevin's and Max's proposals, The patch makes the output more detailed: (qemu) info snapshots List of snapshots present on all disks: ID TAG VM SIZE DATE VM CLOCK -- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813 List of partial (non-loadable) snapshots on 'drive_image1': ID TAG VM SIZE DATE VM CLOCK 1 snap1 0 2016-05-22 16:57:31 00:01:30.567 Signed-off-by: Lin Ma <lma@suse.com> Message-id: 1467869164-26688-3-git-send-email-lma@suse.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13hmp: use snapshot name to determine whether a snapshot is 'fully available'Lin Ma
Currently qemu uses snapshot id to determine whether a snapshot is fully available, It causes incorrect output in some scenario. For instance: (qemu) info block drive_image1 (#block113): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk0.qcow2 (qcow2) Cache mode: writeback drive_image2 (#block349): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk1.qcow2 (qcow2) Cache mode: writeback (qemu) (qemu) info snapshots There is no snapshot available. (qemu) (qemu) snapshot_blkdev_internal drive_image1 snap1 (qemu) (qemu) info snapshots There is no suitable snapshot available (qemu) (qemu) savevm checkpoint-1 (qemu) (qemu) info snapshots ID TAG VM SIZE DATE VM CLOCK 1 snap1 0 2016-05-22 16:57:31 00:01:30.567 (qemu) $ qemu-img snapshot -l disk0.qcow2 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 1 snap1 0 2016-05-22 16:57:31 00:01:30.567 2 checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813 $ qemu-img snapshot -l disk1.qcow2 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 1 checkpoint-1 0 2016-05-22 16:58:07 00:02:06.813 The patch uses snapshot name instead of snapshot id to determine whether a snapshot is fully available and uses '--' instead of snapshot id in output because the snapshot id is not guaranteed to be the same on all images. For instance: (qemu) info snapshots List of snapshots present on all disks: ID TAG VM SIZE DATE VM CLOCK -- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813 Signed-off-by: Lin Ma <lma@suse.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1467869164-26688-2-git-send-email-lma@suse.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-20trace: split out trace events for migration/ directoryDaniel P. Berrange
Move all trace-events for files in the migration/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-6-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-17migration: code clean upLiang Li
Use 'QemuMutex comp_done_lock' and 'QemuCond comp_done_cond' instead of 'QemuMutex *comp_done_lock' and 'QemuCond comp_done_cond'. To keep consistent with 'QemuMutex decomp_done_lock' and 'QemuCond comp_done_cond'. Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1462433579-13691-10-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: refine the decompression codeLiang Li
The current code for multi-thread decompression is not clear, especially in the aspect of using lock. Refine the code to make it clear. Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1462433579-13691-9-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: refine the compression codeLiang Li
The current code for multi-thread compression is not clear, especially in the aspect of using lock. Refine the code to make it clear. Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1462433579-13691-8-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: protect the quit flag by lockLiang Li
quit_comp_thread and quit_decomp_thread are accessed by several thread, it's better to protect them with locks. We use a per thread flag to replace the global one, and the new flag is protected by a lock. Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1462433579-13691-7-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: refine ram_save_compressed_pageLiang Li
Use qemu_put_compression_data to do the compression directly instead of using do_compress_ram_page, avoid some data copy. very small improvement, at the same time, add code to check if the compression is successful. Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1462433579-13691-6-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17qemu-file: Fix qemu_put_compression_data flawLiang Li
Current qemu_put_compression_data can only work with no writable QEMUFile, and can't work with the writable QEMUFile. But it does not provide any measure to prevent users from using it with a writable QEMUFile. We should fix this flaw to make it works with writable QEMUFile. Signed-off-by: Liang Li <liang.z.li@intel.com> Suggested-by: Juan Quintela <quintela@redhat.com> Message-Id: <1462433579-13691-5-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: remove useless codeLiang Li
page_buffer is set twice repeatedly, remove the previous set. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1462433579-13691-4-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: Fix a potential issueLiang Li
At the end of live migration and before vm_start() on the destination side, we should make sure all the decompression tasks are finished, if this can not be guaranteed, the VM may get the incorrect memory data, or the updated memory may be overwritten by the decompression thread. Add the code to fix this potential issue. Suggested-by: David Alan Gilbert <dgilbert@redhat.com> Suggested-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1462433579-13691-3-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: Fix multi-thread compression bugLiang Li
Recently, a bug related to multiple thread compression feature for live migration is reported. The destination side will be blocked during live migration if there are heavy workload in host and memory intensive workload in guest, this is most likely to happen when there is one decompression thread. Some parts of the decompression code are incorrect: 1. The main thread receives data from source side will enter a busy loop to wait for a free decompression thread. 2. A lock is needed to protect the decomp_param[idx]->start, because it is checked in the main thread and is updated in the decompression thread. Fix these two issues by following the code pattern for compression. Signed-off-by: Liang Li <liang.z.li@intel.com> Reported-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1462433579-13691-2-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: fix inability to save VM after snapshotDenis V. Lunev
The following sequence of operations fails: virsh start vm virsh snapshot-create vm virshh save vm --file file with the following error error: Failed to save domain vm to file error: internal error: unable to execute QEMU command 'migrate': There's a migration process in progress The problem is that qemu_savevm_state() calls migrate_init() which sets migration state to MIGRATION_STATUS_SETUP and never cleaned it up. This patch do the job. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> Message-Id: <1466003203-26263-1-git-send-email-den@openvz.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: Trace improvementsDr. David Alan Gilbert
A couple of improvements to tracing that have come out of helping people with migration problems: * vmstate_n_elems trace the count/name - for when you have problems getting array counts right * vmstate_subsection_load_bad - add the idstr, for when you receive a subsection you weren't expecting. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1465896986-16132-1-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: Don't use *_to_cpup() and cpu_to_*w()Peter Maydell
The *_to_cpup() and cpu_to_*w() functions just compose a pointer dereference with a byteswap. Instead use ld*_p() and st*_p(), which handle potential pointer misalignment and avoid the need to cast the pointer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1465574962-2710-1-git-send-email-peter.maydell@linaro.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16migration: rename functions to starting migrationsDaniel P. Berrange
Apply the following renames for starting incoming migration: process_incoming_migration -> migration_fd_process_incoming migration_set_incoming_channel -> migration_channel_process_incoming migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming and for starting outgoing migration: migration_set_outgoing_channel -> migration_channel_connect migration_tls_set_outgoing_channel -> migration_tls_channel_connect Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Postcopy: Check for support when setting the capabilityDr. David Alan Gilbert
Knowing whether the destination host supports migration with postcopy can be tricky. The destination doesn't need the capability set, however if we set it then use the opportunity to do the test and tell the user/management layer early. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1465816605-29488-7-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-7-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Postcopy: Add stats on page requestsDr. David Alan Gilbert
On the source, add a count of page requests received from the destination. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Migration: Split out ram part of qmp_query_migrateDr. David Alan Gilbert
The RAM section of qmp_query_migrate is reasonably complex and repeated 3 times. Split it out into a helper. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1465816605-29488-3-git-send-email-dgilbert@redhat.com Reviwed-by: Denis V. Lunev <den@openvz.org> Message-Id: <1465816605-29488-3-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Postcopy: Avoid 0 length discardsDr. David Alan Gilbert
The discard code in migration/ram.c would send request for zero length discards in the case where no discards were needed. It doesn't appear to have had any bad effect. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-13Introduce "xen-load-devices-state"Wen Congyang
Introduce a "xen-load-devices-state" QAPI command that can be used to load the state of all devices, but not the RAM or the block devices of the VM. We only have hmp commands savevm/loadvm, and qmp commands xen-save-devices-state. We use this new command for COLO: 1. suspend both primary vm and secondary vm 2. sync the state 3. resume both primary vm and secondary vm In such case, we need to update all devices' state in any time. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-06-08migration/block: Convert saving to BlockBackendKevin Wolf
This creates a new BlockBackend for copying data from an images to the migration stream on the source host. All I/O for block migration goes through BlockBackend now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08migration/block: Convert load to BlockBackendKevin Wolf
This converts the loading part of block migration to use BlockBackend interfaces rather than accessing the BlockDriverState directly. Note that this takes a lazy shortcut. We should really use a separate BlockBackend that is configured for the migration rather than for the guest (e.g. writethrough caching is unnecessary) and holds its own reference to the BlockDriverState, but the impact isn't that big and we didn't have a separate migration reference before either, so it must be good enough, I guess... Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08block: Switch bdrv_write_zeroes() to byte interfaceEric Blake
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we cater to the updated semantics. Do the same for bdrv_co_write_zeroes(). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-07all: Remove unnecessary glib.h includesPeter Maydell
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-29exec: remove ram_addr argument from qemu_ram_block_from_hostPaolo Bonzini
Of the two callers, one does not use it, and the other can compute it itself based on the other output argument (offset) and the RAMBlock. Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-26Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-2' ↵Peter Maydell
into staging migration: add TLS support to the migration data channel This is a big refactoring of the migration backend code - moving away from QEMUFile to the new QIOChannel framework introduced here. This brings a good level of abstraction and reduction of many lines of code. This series also adds the ability for many backends (all except RDMA) to use TLS for encrypting the migration data between the endpoints. # gpg: Signature made Thu 26 May 2016 07:07:08 BST using RSA key ID 657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" * remotes/amit-migration/tags/migration-2.7-2: (28 commits) migration: remove qemu_get_fd method from QEMUFile migration: remove support for non-iovec based write handlers migration: add support for encrypting data with TLS migration: define 'tls-creds' and 'tls-hostname' migration parameters migration: don't use an array for storing migrate parameters migration: move definition of struct QEMUFile back into qemu-file.c migration: delete QEMUFile stdio implementation migration: delete QEMUFile sockets implementation migration: delete QEMUSizedBuffer struct migration: delete QEMUFile buffer implementation migration: convert savevm to use QIOChannel for writing to files migration: convert RDMA to use QIOChannel interface migration: convert exec socket protocol to use QIOChannel migration: convert fd socket protocol to use QIOChannel migration: convert tcp socket protocol to use QIOChannel migration: rename unix.c to socket.c migration: convert unix socket protocol to use QIOChannel migration: convert post-copy to use QIOChannelBuffer migration: add reporting of errors for outgoing migration migration: add helpers for creating QEMUFile from a QIOChannel ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-28 03:03:34 +0000