aboutsummaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)Author
2020-02-13migration/rdma: rdma_accept_incoming_migration fix error handlingDr. David Alan Gilbert
rdma_accept_incoming_migration is called from an fd handler and can't return an Error * anywhere. Currently it's leaking Error's in errp/local_err - there's no point putting them in there unless we can report them. Turn most into fprintf's, and the last into an error_reportf_err where it's coming up from another function. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-13migration: Optimization about wait-unplug migration stateKeqian Zhu
qemu_savevm_nr_failover_devices() is originally designed to get the number of failover devices, but it actually returns the number of "unplug-pending" failover devices now. Moreover, what drives migration state to wait-unplug should be the number of "unplug-pending" failover devices, not all failover devices. We can also notice that qemu_savevm_state_guest_unplug_pending() and qemu_savevm_nr_failover_devices() is equivalent almost (from the code view). So the latter is incorrect semantically and useless, just delete it. In the qemu_savevm_state_guest_unplug_pending(), once hit a unplug-pending failover device, then it can return true right now to save cpu time. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-13migration: Maybe VM is paused when migration is cancelledZhimin Feng
If the migration is cancelled when it is in the completion phase, the migration state is set to MIGRATION_STATUS_CANCELLING. The VM maybe wait for the 'pause_sem' semaphore in migration_maybe_pause function, so that VM always is paused. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Zhimin Feng <fengzhimin1@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-29migration/compress: compress QEMUFile is not writableWei Yang
We open a file with empty_ops for compress QEMUFile, which means this is not writable. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-29migration: Simplify get_qlistEric Auger
Instead of inserting read elements at the head and then reversing the list, it is simpler to add each element after the previous one. Introduce QLIST_RAW_INSERT_AFTER helper and use it in get_qlist(). Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-29multifd: Split multifd code into its own fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29multifd: Make multifd_load_setup() get an Error parameterJuan Quintela
We need to change the full chain to pass the Error parameter. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29multifd: Make multifd_save_setup() get an Error parameterJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29migration: Make checkpatch happy with commentsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29multifd: Use qemu_target_page_size()Juan Quintela
We will make it cpu independent. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29multifd: multifd_send_sync_main only needs the qemufileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29multifd: multifd_queue_page only needs the qemufileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29multifd: multifd_send_pages only needs the qemufileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29migration/multifd: fix nullptr access in multifd_send_terminate_threadsZhimin Feng
If the multifd_send_threads is not created when migration is failed, multifd_save_cleanup would be called twice. In this senario, the multifd_send_state is accessed after it has been released, the result is that the source VM is crashing down. Here is the coredump stack: Program received signal SIGSEGV, Segmentation fault. 0x00005629333a78ef in multifd_send_terminate_threads (err=err@entry=0x0) at migration/ram.c:1012 1012 MultiFDSendParams *p = &multifd_send_state->params[i]; #0 0x00005629333a78ef in multifd_send_terminate_threads (err=err@entry=0x0) at migration/ram.c:1012 #1 0x00005629333ab8a9 in multifd_save_cleanup () at migration/ram.c:1028 #2 0x00005629333abaea in multifd_new_send_channel_async (task=0x562935450e70, opaque=<optimized out>) at migration/ram.c:1202 #3 0x000056293373a562 in qio_task_complete (task=task@entry=0x562935450e70) at io/task.c:196 #4 0x000056293373a6e0 in qio_task_thread_result (opaque=0x562935450e70) at io/task.c:111 #5 0x00007f475d4d75a7 in g_idle_dispatch () from /usr/lib64/libglib-2.0.so.0 #6 0x00007f475d4da9a9 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #7 0x0000562933785b33 in glib_pollfds_poll () at util/main-loop.c:219 #8 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242 #9 main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:518 #10 0x00005629334c5acf in main_loop () at vl.c:1810 #11 0x000056293334d7bb in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4471 If the multifd_send_threads is not created when migration is failed. In this senario, we don't call multifd_save_cleanup in multifd_new_send_channel_async. Signed-off-by: Zhimin Feng <fengzhimin1@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-29migration: Create migration_is_running()Juan Quintela
This function returns true if we are in the middle of a migration. It is like migration_is_setup_or_active() with CANCELLING and COLO. Adapt all callers that are needed. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29migration: Don't send data if we have stoppedJuan Quintela
If we do a cancel, we got out without one error, but we can't do the rest of the output as in a normal situation. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29qemu-file: Don't do IO after shutdownJuan Quintela
Be sure that we are not doing neither read/write after shutdown of the QEMUFile. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29multifd: Make sure that we don't do any IO after an errorJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-20multifd: Be consistent about using uint64_tJuan Quintela
We transmit ram_addr_t always as uint64_t. Be consistent in its use (on 64bit system, it is always uint64_t problem is 32bits). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-20migration: Support QLIST migrationEric Auger
Support QLIST migration using the same principle as QTAILQ: 94869d5c52 ("migration: migrate QTAILQ"). The VMSTATE_QLIST_V macro has the same proto as VMSTATE_QTAILQ_V. The change mainly resides in QLIST RAW macros: QLIST_RAW_INSERT_HEAD and QLIST_RAW_REVERSE. Tests also are provided. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: Change SaveStateEntry.instance_id into uint32_tPeter Xu
It was always used as 32bit, so define it as used to be clear. Instead of using -1 as the auto-gen magic value, we switch to UINT32_MAX. We also make sure that we don't auto-gen this value to avoid overflowed instance IDs without being noticed. Suggested-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: Define VMSTATE_INSTANCE_ID_ANYPeter Xu
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to auto-generate the vmstate instance ID. Previously it was hard coded as -1 instead of this macro. It helps to change this default value in the follow up patches. No functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20Bug #1829242 correction.Alexey Romko
Added type conversions to ram_addr_t before all left shifts of page indexes to TARGET_PAGE_BITS, to correct overflows when the page address was 4Gb and more. Signed-off-by: Alexey Romko <nevilad@yahoo.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/multifd: fix destroyed mutex access in terminating multifd threadsJiahui Cen
One multifd will lock all the other multifds' IOChannel mutex to inform them to quit by setting p->quit or shutting down p->c. In this senario, if some multifds had already been terminated and multifd_load_cleanup/multifd_save_cleanup had destroyed their mutex, it could cause destroyed mutex access when trying lock their mutex. Here is the coredump stack: #0 0x00007f81a2794437 in raise () from /usr/lib64/libc.so.6 #1 0x00007f81a2795b28 in abort () from /usr/lib64/libc.so.6 #2 0x00007f81a278d1b6 in __assert_fail_base () from /usr/lib64/libc.so.6 #3 0x00007f81a278d262 in __assert_fail () from /usr/lib64/libc.so.6 #4 0x000055eb1bfadbd3 in qemu_mutex_lock_impl (mutex=0x55eb1e2d1988, file=<optimized out>, line=<optimized out>) at util/qemu-thread-posix.c:64 #5 0x000055eb1bb4564a in multifd_send_terminate_threads (err=<optimized out>) at migration/ram.c:1015 #6 0x000055eb1bb4bb7f in multifd_send_thread (opaque=0x55eb1e2d19f8) at migration/ram.c:1171 #7 0x000055eb1bfad628 in qemu_thread_start (args=0x55eb1e170450) at util/qemu-thread-posix.c:502 #8 0x00007f81a2b36df5 in start_thread () from /usr/lib64/libpthread.so.0 #9 0x00007f81a286048d in clone () from /usr/lib64/libc.so.6 To fix it up, let's destroy the mutex after all the other multifd threads had been terminated. Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Signed-off-by: Ying Fang <fangying1@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/multifd: fix nullptr access in terminating multifd threadsJiahui Cen
One multifd channel will shutdown all the other multifd's IOChannel when it fails to receive an IOChannel. In this senario, if some multifds had not received its IOChannel yet, it would try to shutdown its IOChannel which could cause nullptr access at qio_channel_shutdown. Here is the coredump stack: #0 object_get_class (obj=obj@entry=0x0) at qom/object.c:908 #1 0x00005563fdbb8f4a in qio_channel_shutdown (ioc=0x0, how=QIO_CHANNEL_SHUTDOWN_BOTH, errp=0x0) at io/channel.c:355 #2 0x00005563fd7b4c5f in multifd_recv_terminate_threads (err=<optimized out>) at migration/ram.c:1280 #3 0x00005563fd7bc019 in multifd_recv_new_channel (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce00) at migration/ram.c:1478 #4 0x00005563fda82177 in migration_ioc_process_incoming (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce30) at migration/migration.c:605 #5 0x00005563fda8567d in migration_channel_process_incoming (ioc=0x556400255610) at migration/channel.c:44 #6 0x00005563fda83ee0 in socket_accept_incoming_migration (listener=0x5563fff6b920, cioc=0x556400255610, opaque=<optimized out>) at migration/socket.c:166 #7 0x00005563fdbc25cd in qio_net_listener_channel_func (ioc=<optimized out>, condition=<optimized out>, opaque=<optimized out>) at io/net-listener.c:54 #8 0x00007f895b6fe9a9 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #9 0x00005563fdc18136 in glib_pollfds_poll () at util/main-loop.c:218 #10 0x00005563fdc181b5 in os_host_main_loop_wait (timeout=1000000000) at util/main-loop.c:241 #11 0x00005563fdc183a2 in main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:517 #12 0x00005563fd8edb37 in main_loop () at vl.c:1791 #13 0x00005563fd74fd45 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4473 To fix it up, let's check p->c before calling qio_channel_shutdown. Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Signed-off-by: Ying Fang <fangying1@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/multifd: not use multifd during postcopyWei Yang
We don't support multifd during postcopy, but user still could enable both multifd and postcopy. This leads to migration failure. Skip multifd during postcopy. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/multifd: clean pages after filling packetWei Yang
This is a preparation for the next patch: not use multifd during postcopy. Without enabling postcopy, everything looks good. While after enabling postcopy, migration may fail even not use multifd during postcopy. The reason is the pages is not properly cleared and *old* target page will continue to be transferred. After clean pages, migration succeeds. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/postcopy: enable compress during postcopyWei Yang
postcopy requires to place a whole host page, while migration thread migrate memory in target page size. This makes postcopy need to collect all target pages in one host page before placing via userfaultfd. To enable compress during postcopy, there are two problems to solve: 1. Random order for target page arrival 2. Target pages in one host page arrives without interrupt by target page from other host page The first one is handled by previous cleanup patch. This patch handles the second one by: 1. Flush compress thread for each host page 2. Wait for decompress thread for before placing host page Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/postcopy: enable random order target page arrivalWei Yang
After using number of target page received to track one host page, we could have the capability to handle random order target page arrival in one host page. This is a preparation for enabling compress during postcopy. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/postcopy: set all_zero to true on the first target pageWei Yang
For the first target page, all_zero is set to true for this round check. After target_pages introduced, we could leverage this variable instead of checking the address offset. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/postcopy: count target page number to decide the place_neededWei Yang
In postcopy, it requires to place whole host page instead of target page. Currently, it relies on the page offset to decide whether this is the last target page. We also can count the target page number during the iteration. When the number of target page equals (host page size / target page size), this means it is the last target page in the host page. This is a preparation for non-ordered target page transmission. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/postcopy: wait for decompress thread in precopyWei Yang
Compress is not supported with postcopy, it is safe to wait for decompress thread just in precopy. This is a preparation for later patch. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/postcopy: reduce memset when it is zero page and ↵Wei Yang
matches_target_page_size In this case, page_buffer content would not be used. Skip this to save some time. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration/ram: Yield periodically to the main loopYury Kotov
Usually, incoming migration coroutine yields to the main loop while its IO-channel is waiting for data to receive. But there is a case when RAM migration and data receive have the same speed: VM with huge zeroed RAM. In this case, IO-channel won't read and thus the main loop is stuck and for instance, it doesn't respond to QMP commands. For this case, yield periodically, but not too often, so as not to affect the speed of migration. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: savevm_state_handler_insert: constant-time element insertionScott Cheloha
savevm_state's SaveStateEntry TAILQ is a priority queue. Priority sorting is maintained by searching from head to tail for a suitable insertion spot. Insertion is thus an O(n) operation. If we instead keep track of the head of each priority's subqueue within that larger queue we can reduce this operation to O(1) time. savevm_state_handler_remove() becomes slightly more complex to accomodate these gains: we need to replace the head of a priority's subqueue when removing it. With O(1) insertion, booting VMs with many SaveStateEntry objects is more plausible. For example, a ppc64 VM with maxmem=8T has 40000 such objects to insert. Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: add savevm_state_handler_remove()Scott Cheloha
Create a function to abstract common logic needed when removing a SaveStateEntry element from the savevm_state.handlers queue. For now we just remove the element. Soon it will involve additional cleanup. Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: Fix the re-run check of the migrate-incoming commandYury Kotov
The current check sets an error but doesn't fail the command. This may cause a problem if new connection attempt by the same URI affects the first connection. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: Fix incorrect integer->float conversion caught by clangFangrui Song
Clang does not like qmp_migrate_set_downtime()'s code to clamp double @value to 0..INT64_MAX: qemu/migration/migration.c:2038:24: error: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Werror,-Wimplicit-int-float-conversion] The warning will be enabled by default in clang 10. It is not available for clang <= 9. The clamp is actually useless; @value is checked to be within 0..MAX_MIGRATE_DOWNTIME_SECONDS immediately before. Delete it. While there, make the conversion from double to int64_t explicit. Signed-off-by: Fangrui Song <i@maskray.me> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Patch split, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: Rate limit inside host pagesDr. David Alan Gilbert
When using hugepages, rate limiting is necessary within each huge page, since a 1G huge page can take a significant time to send, so you end up with bursty behaviour. Fixes: 4c011c37ecb3 ("postcopy: Send whole huge pages") Reported-by: Lin Ma <LMa@suse.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20ram.c: remove unneeded labelsDaniel Henrique Barboza
ram_save_queue_pages() has an 'err' label that can be replaced by 'return -1' instead. Same thing with ram_discard_range(), and in this case we can also get rid of the 'ret' variable and return either '-1' on error or the result of ram_block_discard_range(). CC: Juan Quintela <quintela@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration: Make sure that we don't call write() in case of errorJuan Quintela
If we are exiting due to an error/finish/.... Just don't try to even touch the channel with one IO operation. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20multifd: Initialize local variableJuan Quintela
Fill everything with zero, so the padding fields are also initialized. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-06vmstate: replace DeviceState with VMStateIfMarc-André Lureau
Replace DeviceState dependency with VMStateIf on vmstate API. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com>
2019-12-17colo: fix return without releasing RCUPaolo Bonzini
Use WITH_RCU_READ_LOCK_GUARD to avoid exiting colo_init_ram_cache without releasing RCU. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17migration: fix maybe-uninitialized warningMarc-André Lureau
../migration/ram.c: In function ‘multifd_recv_thread’: /home/elmarco/src/qq/include/qapi/error.h:165:5: error: ‘block’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 165 | error_setg_internal((errp), __FILE__, __LINE__, __func__, \ | ^~~~~~~~~~~~~~~~~~~ ../migration/ram.c:818:15: note: ‘block’ was declared here 818 | RAMBlock *block; | ^~~~~ Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-16migration: ram: Switch to ram block writebackBeata Michalska
Switch to ram block writeback for pmem migration. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20191121000843.24844-4-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-25net/virtio: fix dev_unplug_pendingJens Freimann
.dev_unplug_pending is set up by virtio-net code indepent of failover support was set for the device or not. This gives a wrong result when we check for existing primary devices in migration code. Fix this by actually calling dev_unplug_pending() instead of just checking if the function pointer was set. When the feature was not negotiated dev_unplug_pending() will always return false. This prevents us from going into the wait-unplug state when there's no primary device present. Fixes: 9711cd0dfc3f ("net/virtio: add failover support") Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-29migration: add new migration state wait-unplugJens Freimann
This patch adds a new migration state called wait-unplug. It is entered after the SETUP state if failover devices are present. It will transition into ACTIVE once all devices were succesfully unplugged from the guest. So if a guest doesn't respond or takes long to honor the unplug request the user will see the migration state 'wait-unplug'. In the migration thread we query failover devices if they're are still pending the guest unplug. When all are unplugged the migration continues. If one device won't unplug migration will stay in wait_unplug state. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20191029114905.6856-9-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-26core: replace getpagesize() with qemu_real_host_page_sizeWei Yang
There are three page size in qemu: real host page size host page size target page size All of them have dedicate variable to represent. For the last two, we use the same form in the whole qemu project, while for the first one we use two forms: qemu_real_host_page_size and getpagesize(). qemu_real_host_page_size is defined to be a replacement of getpagesize(), so let it serve the role. [Note] Not fully tested for some arch or device. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 00:02:11 +0000