aboutsummaryrefslogtreecommitdiff
path: root/migration/socket.c
AgeCommit message (Collapse)Author
2018-07-10migration: unify incoming processingPeter Xu
This is the 2nd patch to unbreak postcopy recovery. Let's unify the migration_incoming_process() call at a single place rather than calling it in connection setup codes. This fixes a problem that we will go into incoming migration procedure even if we are trying to recovery from a paused postcopy migration. Fixes: 36c2f8be2c ("migration: Delay start of migration main routines") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180627132246.5576-5-peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-05-15migration: let incoming side use thread contextPeter Xu
The old incoming migration is running in main thread and default gcontext. With the new qio_channel_add_watch_full() we can now let it run in the thread's own gcontext (if there is one). Currently this patch does nothing alone. But when any of the incoming migration is run in another iothread (e.g., the upcoming migrate-recover command), this patch will bind the incoming logic to the iothread instead of the main thread (which may already get page faulted and hanged). RDMA is not considered for now since it's not even using the QIO watch framework at all. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-2-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15migration: Delay start of migration main routinesJuan Quintela
We need to make sure that we have started all the multifd threads. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-05-15migration: Export functions to create send channelsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-23migration: convert socket server to QIONetListenerDaniel P. Berrange
Instead of creating a QIOChannelSocket directly for the migration server socket, use a QIONetListener. This provides the ability to listen on multiple sockets at the same time, so enables full support for IPv4/IPv6 dual stack. For example, '$QEMU -incoming tcp::9000' now correctly listens on both 0.0.0.0 and :: at the same time, instead of only on 0.0.0.0. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20180312141714.7223-1-berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-06qio: non-default context for async connPeter Xu
We have worked on qio_task_run_in_thread() already. Further, let all the qio channel APIs use that context. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-02-06migration: Route errors down through migration_channel_connectDr. David Alan Gilbert
Route async errors (especially from sockets) down through migration_channel_connect and on to migrate_fd_connect where they can be cleaned up. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-15migration: free addr in the same function that we created itJuan Quintela
Otherwise, we can't use it after calling socket_start_incoming_migration Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-09-22migration: Create migration_has_all_channelsJuan Quintela
This function allows us to decide when to close the listener socket. For now, we only need one connection. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-22migration: Teach it about G_SOURCE_REMOVEJuan Quintela
As this is defined on glib 2.32, add compatibility macros for older glibs. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: Move migration.h to migration/Juan Quintela
Nothing uses it outside of migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Remove MigrationState from migration_channel_incomming()Juan Quintela
All callers were calling migrate_get_current(), so do it inside the function. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-01migration: Export socket.c functions in its own fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-01migration: Split qemu-file.hJuan Quintela
Split the file into public and internal interfaces. I have to rename the external one because we can't have two include files with the same name in the same directory. Build system gets confused. The only exported functions are the ones that handle basic types. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-18migration: Split migration/channel.c for channel operationsJuan Quintela
Create an include for its exported functions. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> --- Add proper header
2017-05-09sockets: Limit SocketAddressLegacy to external interfacesMarkus Armbruster
SocketAddressLegacy is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. SocketAddress is the equivalent flat union. Convert all users of SocketAddressLegacy to SocketAddress, except for existing external interfaces. See also commit fce5d53..9445673 and 85a82e8..c5f1ae3. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Minor editing accident fixed, commit message and a comment tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09sockets: Rename SocketAddress to SocketAddressLegacyMarkus Armbruster
The next commit will rename SocketAddressFlat to SocketAddress, and the commit after that will replace most uses of SocketAddressLegacy by SocketAddress, replacing most of this commit's renames right back. Note that checkpatch emits a few "line over 80 characters" warnings. The long lines are all temporary; the SocketAddressLegacy replacement will shorten them again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09sockets: Prepare inet_parse() for flattened SocketAddressMarkus Armbruster
I'm going to flatten SocketAddress: rename SocketAddress to SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate SocketAddressLegacy except in external interfaces. inet_parse() returns a newly allocated InetSocketAddress. Lift the allocation from inet_parse() into its caller socket_parse() to prepare for flattening SocketAddress. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Straightforward rebase]
2017-05-04migration: to_dst_file at that point is NULLJuan Quintela
We have just arrived as: migration.c: qemu_migrate() .... s = migrate_init() <- puts it to NULL .... {tcp,unix}_start_outgoing_migration -> socket_outgoing_migration migration_channel_connect() sets to_dst_file if tls is enabled, we do another round through migrate_channel_tls_connect(), but we only set it up if there is no error. So we don't need the assignation. I am removing it to remove in the follwing patches the knowledge about MigrationState in that two files. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-01-23io: change the QIOTask callback signatureDaniel P. Berrange
Currently the QIOTaskFunc signature takes an Object * for the source, and an Error * for any error. We also need to be able to provide a result pointer. Rather than continue to add parameters to QIOTaskFunc, remove the existing ones and simply pass the QIOTask object instead. This has methods to access all the other data items required in the callback impl. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-27migration: set name for all I/O channels createdDaniel P. Berrange
Ensure that all I/O channels created for migration are given names to distinguish their respective roles. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-13migration: Fix seg with missing portDr. David Alan Gilbert
The command : migrate tcp:localhost: currently segs; fix it so it now says: error parsing address 'localhost:' and the same for -incoming. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-08-11migration/socket: fix typo in file headerCao jin
Code of inet socket & unix socket is merged together. Also add some newlines, make code block well separated. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469696074-12744-4-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16migration: rename functions to starting migrationsDaniel P. Berrange
Apply the following renames for starting incoming migration: process_incoming_migration -> migration_fd_process_incoming migration_set_incoming_channel -> migration_channel_process_incoming migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming and for starting outgoing migration: migration_set_outgoing_channel -> migration_channel_connect migration_tls_set_outgoing_channel -> migration_tls_channel_connect Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26migration: add support for encrypting data with TLSDaniel P. Berrange
This extends the migration_set_incoming_channel and migration_set_outgoing_channel methods so that they will automatically wrap the QIOChannel in a QIOChannelTLS instance if TLS credentials are configured in the migration parameters. This allows TLS to work for tcp, unix, fd and exec migration protocols. It does not (currently) work for RDMA since it does not use these APIs, but it is unlikely that TLS would be desired with RDMA anyway since it would degrade the performance to that seen with TCP defeating the purpose of using RDMA. On the target host, QEMU would be launched with a set of TLS credentials for a server endpoint $ qemu-system-x86_64 -monitor stdio -incoming defer \ -object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=server,id=tls0 \ ...other args... To enable incoming TLS migration 2 monitor commands are then used (qemu) migrate_set_str_parameter tls-creds tls0 (qemu) migrate_incoming tcp:myhostname:9000 On the source host, QEMU is launched in a similar manner but using client endpoint credentials $ qemu-system-x86_64 -monitor stdio \ -object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=client,id=tls0 \ ...other args... To enable outgoing TLS migration 2 monitor commands are then used (qemu) migrate_set_str_parameter tls-creds tls0 (qemu) migrate tcp:otherhostname:9000 Thanks to earlier improvements to error reporting, TLS errors can be seen 'info migrate' when doing a detached migration. For example: (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed total time: 0 milliseconds error description: TLS handshake failed: The TLS connection was non-properly terminated. Or (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed total time: 0 milliseconds error description: Certificate does not match the hostname localhost Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-27-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26migration: convert tcp socket protocol to use QIOChannelDaniel P. Berrange
Drop the current TCP socket migration driver and extend the new generic socket driver to cope with the TCP address format Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-15-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26migration: rename unix.c to socket.cDaniel P. Berrange
The unix.c file will be nearly the same as the tcp.c file, only differing in the initial SocketAddress creation code. Rename unix.c to socket.c and refactor it a little to prepare for merging the TCP code. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-14-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 23:47:32 +0000