aboutsummaryrefslogtreecommitdiff
path: root/migration/savevm.c
AgeCommit message (Collapse)Author
2017-02-13migration: consolidate VMStateField.startHalil Pasic
The member VMStateField.start is used for two things, partial data migration for VBUFFER data (basically provide migration for a sub-buffer) and for locating next in QTAILQ. The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC is used. This however goes unnoticed because actually partial migration for VBUFFER is not used at all. Let's consolidate the usage of VMStateField.start by removing support for partial migration for VBUFFER. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-06Postcopy: Reset state to avoid cleanup assertDr. David Alan Gilbert
On a destination host with no userfault support an incoming postcopy would cause the state to enter ADVISE before it realised there was no support, and because it was in ADVISE state it would perform a cleanup at the end. Since there was no support the cleanup function should be unreachable, but ends up being called and asserting. Reset the state when we realise we have no support, thus the cleanup doesn't happen. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170202155909.31784-2-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06migration: Check for ID lengthDr. David Alan Gilbert
The qdev id of a device can be huge if it's on the end of a chain of bridges; in reality such chains shouldn't occur but they can be made to by chaining PCIe bridges together. The migration format has a number of 256 character long format limits; check we don't hit them (we already use pstrcat/cpy but that just protects us from buffer overruns, we fairly quickly hit an assert). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20170202125956.21942-3-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06vmstate_register_with_alias_id: Take an Error **Dr. David Alan Gilbert
I'll be adding an error to it in a subsequent patch. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20170202125956.21942-2-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06migration: create Migration Incoming State at init timeJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1485207141-1941-3-git-send-email-quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-01-27savevm: add public save_vmstate functionPavel Dovgalyuk
This patch introduces save_vmstate function to allow saving and loading vmstates from the replay module. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170124071741.4572.13714.stgit@PASHA-ISP> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-24migration: extend VMStateInfoJianjun Duan
Current migration code cannot handle some data structures such as QTAILQ in qemu/queue.h. Here we extend the signatures of put/get in VMStateInfo so that customized handling is supported. put now will return int type. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-10migration: allow to prioritize save state entriesPeter Xu
During migration, save state entries are saved/loaded without a specific order - we just traverse the savevm_state.handlers list and do it one by one. This might not be enough. There are requirements that we need to load specific device's vmstate first before others. For example, VT-d IOMMU contains DMA address remapping information, which is required by all the PCI devices to do address translations. We need to make sure IOMMU's device state is loaded before the rest of the PCI devices, so that DMA address translation can work properly. This patch provide a VMStateDescription.priority value to allow specify the priority of the saved states. The loadvm operation will be done with those devices with higher vmsd priority. Before this patch, we are possibly achieving the ordering requirement by an assumption that the ordering will be the same with the ordering that objects are created. A better way is to mark it out explicitly in the VMStateDescription table, like what this patch does. Current ordering logic is still naive and slow, but after all that's not a critical path so IMO it's a workable solution for now. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2016-10-28Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' ↵Peter Maydell
into staging Merge qio 2016/10/27 v1 # gpg: Signature made Thu 27 Oct 2016 13:54:03 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qio-2016-10-27-1: main: set names for main loop sources created vnc: set name for all I/O channels created migration: set name for all I/O channels created char: set name for all I/O channels created nbd: set name for all I/O channels created io: add ability to set a name for IO channels io: Add a QIOChannelSocket cleanup test io: set LISTEN flag explicitly for listen sockets io: Introduce a qio_channel_set_feature() helper io: Use qio_channel_has_feature() where applicable io: Fix double shift usages on QIOChannel features Conflicts: qemu-char.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-27migration: set name for all I/O channels createdDaniel P. Berrange
Ensure that all I/O channels created for migration are given names to distinguish their respective roles. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-24migration/savevm.c: migrate non-default page sizePeter Maydell
Add a subsection to vmstate_configuration which is present only if the guest is using a target page size which is different from the default. This allows us to helpfully diagnose attempts to migrate between machines which are using different target page sizes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-13migration: Make failed migration load set file errorDr. David Alan Gilbert
If an error occurs in a section load, set the file error flag so that the transport can get notified to do a cleanup. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael R. Hines <michael@hinespot.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-07-13hmp: show all of snapshot info on every block dev in output of 'info snapshots'Lin Ma
Currently, the output of 'info snapshots' shows fully available snapshots. It's opaque, hides some snapshot information to users. It's not convenient if users want to know more about all of snapshot information on every block device via monitor. Follow Kevin's and Max's proposals, The patch makes the output more detailed: (qemu) info snapshots List of snapshots present on all disks: ID TAG VM SIZE DATE VM CLOCK -- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813 List of partial (non-loadable) snapshots on 'drive_image1': ID TAG VM SIZE DATE VM CLOCK 1 snap1 0 2016-05-22 16:57:31 00:01:30.567 Signed-off-by: Lin Ma <lma@suse.com> Message-id: 1467869164-26688-3-git-send-email-lma@suse.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13hmp: use snapshot name to determine whether a snapshot is 'fully available'Lin Ma
Currently qemu uses snapshot id to determine whether a snapshot is fully available, It causes incorrect output in some scenario. For instance: (qemu) info block drive_image1 (#block113): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk0.qcow2 (qcow2) Cache mode: writeback drive_image2 (#block349): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk1.qcow2 (qcow2) Cache mode: writeback (qemu) (qemu) info snapshots There is no snapshot available. (qemu) (qemu) snapshot_blkdev_internal drive_image1 snap1 (qemu) (qemu) info snapshots There is no suitable snapshot available (qemu) (qemu) savevm checkpoint-1 (qemu) (qemu) info snapshots ID TAG VM SIZE DATE VM CLOCK 1 snap1 0 2016-05-22 16:57:31 00:01:30.567 (qemu) $ qemu-img snapshot -l disk0.qcow2 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 1 snap1 0 2016-05-22 16:57:31 00:01:30.567 2 checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813 $ qemu-img snapshot -l disk1.qcow2 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 1 checkpoint-1 0 2016-05-22 16:58:07 00:02:06.813 The patch uses snapshot name instead of snapshot id to determine whether a snapshot is fully available and uses '--' instead of snapshot id in output because the snapshot id is not guaranteed to be the same on all images. For instance: (qemu) info snapshots List of snapshots present on all disks: ID TAG VM SIZE DATE VM CLOCK -- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813 Signed-off-by: Lin Ma <lma@suse.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1467869164-26688-2-git-send-email-lma@suse.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-06-17migration: fix inability to save VM after snapshotDenis V. Lunev
The following sequence of operations fails: virsh start vm virsh snapshot-create vm virshh save vm --file file with the following error error: Failed to save domain vm to file error: internal error: unable to execute QEMU command 'migrate': There's a migration process in progress The problem is that qemu_savevm_state() calls migrate_init() which sets migration state to MIGRATION_STATUS_SETUP and never cleaned it up. This patch do the job. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> Message-Id: <1466003203-26263-1-git-send-email-den@openvz.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17migration: Don't use *_to_cpup() and cpu_to_*w()Peter Maydell
The *_to_cpup() and cpu_to_*w() functions just compose a pointer dereference with a byteswap. Instead use ld*_p() and st*_p(), which handle potential pointer misalignment and avoid the need to cast the pointer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1465574962-2710-1-git-send-email-peter.maydell@linaro.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-13Introduce "xen-load-devices-state"Wen Congyang
Introduce a "xen-load-devices-state" QAPI command that can be used to load the state of all devices, but not the RAM or the block devices of the VM. We only have hmp commands savevm/loadvm, and qmp commands xen-save-devices-state. We use this new command for COLO: 1. suspend both primary vm and secondary vm 2. sync the state 3. resume both primary vm and secondary vm In such case, we need to update all devices' state in any time. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-05-26migration: remove support for non-iovec based write handlersDaniel P. Berrange
All the remaining QEMUFile implementations provide an iovec based write handler, so the put_buffer callback can be removed to simplify the code. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-28-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26migration: convert savevm to use QIOChannel for writing to filesDaniel P. Berrange
Convert the exec savevm code to use QIOChannel and QEMUFileChannel, instead of the stdio APIs. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-19-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26migration: convert post-copy to use QIOChannelBufferDaniel P. Berrange
The post-copy code does some I/O to/from an intermediate in-memory buffer rather than direct to the underlying I/O channel. Switch this code to use QIOChannelBuffer instead of QEMUSizedBuffer. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-12-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-24Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-1' ↵Peter Maydell
into staging migration fixes: - ensure src block devices continue fine after a failed migration - fail on migration blockers; helps 9p savevm/loadvm - move autoconverge commands out of experimental state - move the migration-specific qjson in migration/ # gpg: Signature made Mon 23 May 2016 18:15:09 BST using RSA key ID 657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" * remotes/amit-migration/tags/migration-2.7-1: migration: regain control of images when migration fails to complete savevm: fail if migration blockers are present migration: Promote improved autoconverge commands out of experimental state migration/qjson: Drop gratuitous use of QOM migration: Move qjson.[ch] to migration/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-23savevm: fail if migration blockers are presentGreg Kurz
QEMU has currently two ways to prevent migration to occur: - migration blocker when it depends on runtime state - VMStateDescription.unmigratable when migration is not supported at all This patch gathers all the logic into a single function to be called from both the savevm and the migrate paths. This fixes a bug with 9p, at least, where savevm would succeed and the following would happen in the guest after loadvm: $ ls /host ls: cannot access /host: Protocol error With this patch: (qemu) savevm foo Migration is disabled when VirtFS export path '/' is mounted in the guest using mount_tag 'host' Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <146239057139.11271.9011797645454781543.stgit@bahia.huguette.org> [Update subject according to Paolo's suggestion - Amit] Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-23memory: drop find_ram_block()Gonglei
On the one hand, we have already qemu_get_ram_block() whose function is similar. On the other hand, we can directly use mr->ram_block but searching RAMblock by ram_addr which is a kind of waste. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1462845901-89716-2-git-send-email-arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-23migration/qjson: Drop gratuitous use of QOMMarkus Armbruster
All the use of QOM buys us here is the ability to destroy the thing with object_unref(OBJECT(vmdesc)). Not worth the notational overhead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1462380558-2030-3-git-send-email-armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-11postcopy: listen thread is never joinedDr. David Alan Gilbert
We don't join the listen thread, it does its own cleanup. Mark as detached not joinable. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1457690016-9070-2-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-03-11migration: fix use-after-free in loadvm_postcopy_handle_run_bhDenis V. Lunev
MigrationState is destroyed before we can come into bottom half. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1457537708-8622-1-git-send-email-den@openvz.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-28migration: allow machine to enforce configuration section migrationGreg Kurz
Migration of pseries-2.3 doesn't have configuration section. Unfortunately, QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration section, and break migration both ways. This patch introduces a property which allows to enforce a configuration section for machines who don't have one. It can be set at startup: -machine enforce-config-section=on or later from the QEMU monitor: qom-set /machine enforce-config-section on It is up to the tooling to set or unset this property according to the version of the QEMU at the other end of the pipe. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-26migration (postcopy): move bdrv_invalidate_cache_all of of coroutine contextDenis V. Lunev
There is a possibility to hit an assert in qcow2_get_specific_info that s->qcow_version is undefined. This happens when VM in starting from suspended state, i.e. it processes incoming migration, and in the same time 'info block' is called. The problem is that qcow2_invalidate_cache() closes the image and memset()s BDRVQcowState in the middle. The patch moves processing of bdrv_invalidate_cache_all out of coroutine context for postcopy migration to avoid that. This function is called with the following stack: process_incoming_migration_co qemu_loadvm_state qemu_loadvm_state_main loadvm_process_command loadvm_postcopy_handle_run Signed-off-by: Denis V. Lunev <den@openvz.org> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> Message-Id: <1456304019-10507-3-git-send-email-den@openvz.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26migration: reorder code to make it symmetricWei Yang
In qemu_savevm_state_complete_precopy(), it iterates on each device to add a json object and transfer related status to destination, while the order of the last two steps could be refined. Current order: json_start_object() save_section_header() vmstate_save() json_end_object() save_section_footer() After the change: json_start_object() save_section_header() vmstate_save() save_section_footer() json_end_object() This patch reorder the code to to make it symmetric. No functional change. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1454626230-16334-1-git-send-email-richard.weiyang@gmail.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-05migration: fix bad string passed to error_report()Greg Kurz
state->name does not contain a terminating '\0' and you may get: Machine type received is 'pseries-2.3y�?' and local is 'pseries-2.4' load of migration failed: Invalid argument Let's add a precision modifier to fix this. Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Message-Id: <20160205083201.2201.76109.stgit@bahia.huguette.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-05savevm: Split load vm state function qemu_loadvm_statezhanghailiang
qemu_loadvm_state is too long, and we can simplify it by splitting up with three helper functions. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1452829066-9764-4-git-send-email-zhang.zhanghailiang@huawei.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-05migration: rename 'file' in MigrationState to 'to_dst_file'zhanghailiang
Rename the 'file' member of MigrationState to 'to_dst_file' to be consistent with to_src_file, from_src_file and from_dst_file. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1452829066-9764-3-git-send-email-zhang.zhanghailiang@huawei.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-29migration: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-2-git-send-email-peter.maydell@linaro.org
2016-01-14Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' ↵Peter Maydell
into staging Error reporting patches for 2016-01-13 # gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2016-01-13: (41 commits) checkpatch: Detect newlines in error_report and other error functions error: Consistently name Error * objects err, and not errp s390/sclp: Simplify control flow in sclp_realize() hw/s390x: Rename local variables Error *l_err to just err error: Clean up errors with embedded newlines (again) vhdx: Fix "log that needs to be replayed" error message pci-assign: Clean up "Failed to assign" error messages vmdk: Clean up "Invalid extent lines" error message vmdk: Clean up control flow in vmdk_parse_extents() a bit error: Strip trailing '\n' from error string arguments (again) qemu-io qemu-nbd: Use error_report() etc. instead of fprintf() migration: Use error_reportf_err() instead of monitor_printf() spapr: Use error_reportf_err() error: Use error_prepend() where it makes obvious sense error: Use error_reportf_err() where it makes obvious sense error: Don't decorate original error message when adding to it error: New error_prepend(), error_reportf_err() test-throttle: Simplify qemu_init_main_loop() error handling qemu-nbd: Clean up "Failed to load snapshot" error message block: Clean up "Could not create temporary overlay" error message ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13error: Strip trailing '\n' from error string arguments (again)Markus Armbruster
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. Tracked down with the Coccinelle semantic patch from commit 312fd5f. Cc: Fam Zheng <famz@redhat.com> Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com> Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Changchun Ouyang <changchun.ouyang@intel.com> Cc: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
2016-01-13migration: Use error_reportf_err() instead of monitor_printf()Markus Armbruster
Both error_reportf_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_reportf_err() reports to stderr. Both changed functions are HMP command handlers. These should only run within an HMP monitor. Unlike monitor_printf(), error_reportf_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I don't think the errors touched in this commit can come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-15-git-send-email-armbru@redhat.com>
2016-01-13error: Use error_report_err() instead of monitor_printf()Markus Armbruster
Both error_report_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_report_err() reports to stderr. Most changed functions are HMP command handlers. These should only run within an HMP monitor. The one exception is bdrv_password_cb(), which should also only run within an HMP monitor. Four command handlers prefix the error message with the command name: balloon, migrate_set_capability, migrate_set_parameter, migrate. Pointless, drop. Unlike monitor_printf(), error_report_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00). Example: (qemu) device_add ivshmem,id=666 Parameter 'id' expects an identifier Identifiers consist of letters, digits, '-', '.', '_', starting with a letter. Try "help device_add" for more information The "Identifiers consist of..." line is new with this patch. Coccinelle semantic patch: @@ expression M, E; @@ - monitor_printf(M, "%s\n", error_get_pretty(E)); - error_free(E); + error_report_err(E); @r1@ expression M, E; format F; position p; @@ - monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p - error_free(E); + error_report_err(E); @script:python@ p << r1.p; @@ print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-4-git-send-email-armbru@redhat.com>
2016-01-13Postcopy: Send events/change state on incoming sideDr. David Alan Gilbert
I missed the calls to send migration events on the destination side as we enter postcopy. Take care when adding them not to do it after state has been freed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1450266458-3178-4-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2015-11-19migration: normalize locking in migration/savevm.cDenis V. Lunev
basically all bdrv_* operations must be called under aio_context_acquire except ones with bdrv_all prefix. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: implement bdrv_all_find_vmstate_bs helperDenis V. Lunev
The patch also ensures proper locking for the operation. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: reorder processing in hmp_savevmDenis V. Lunev
State deletion can be performed on running VM which reduces VM downtime This approach looks a bit more natural. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_create_snapshot helperDenis V. Lunev
to create snapshot for all loaded block drivers. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: drop find_vmstate_bs check in hmp_delvmDenis V. Lunev
There is no much sense to do the check and write warning. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_find_snapshot helperDenis V. Lunev
to check that snapshot is available for all loaded block drivers. The check bs != bs1 in hmp_info_snapshots is an optimization. The check for availability of this snapshot will return always true as the list of snapshots was collected from that image. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: factor our snapshottability check in load_vmstateDenis V. Lunev
We should check that all inserted and not read-only images support snapshotting. This could be made using already invented helper bdrv_all_can_snapshot(). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_goto_snapshot helperDenis V. Lunev
to switch to snapshot on all loaded block drivers. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_delete_snapshot helperDenis V. Lunev
to delete snapshots from all loaded block drivers. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create helper to test that block drivers supports snapshotsDenis V. Lunev
The patch enforces proper locking for this operation. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 09:21:01 +0000