aboutsummaryrefslogtreecommitdiff
path: root/migration/ram.c
AgeCommit message (Collapse)Author
2018-01-15migration: Guard ram_bytes_remaining against early callDr. David Alan Gilbert
Calling ram_bytes_remaining during the early part of setup is unsafe because the ram_state isn't yet initialised. This can happen in the sequence: migrate migrate_cancel info migrate if the migrate sticks trying to connect (e.g. to an unresponsive destination due to the connect timeout). Here 'info migrate' sees a state of CANCELLING and so assumes the migrate has partially happened. partial fix for: RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1525899 Reported-by: Xianxian Wang <xianwang@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-11-22migration/ram.c: do not set 'postcopy_running' in POSTCOPY_INCOMING_ENDDaniel Henrique Barboza
When migrating a VM with 'migrate_set_capability postcopy-ram on' a postcopy_state is set during the process, ending up with the state POSTCOPY_INCOMING_END when the migration is over. This postcopy_state is taken into account inside ram_load to check how it will load the memory pages. This same ram_load is called when in a loadvm command. Inside ram_load, the logic to see if we're at postcopy_running state is: postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING postcopy_state_get() returns this enum type: typedef enum { POSTCOPY_INCOMING_NONE = 0, POSTCOPY_INCOMING_ADVISE, POSTCOPY_INCOMING_DISCARD, POSTCOPY_INCOMING_LISTENING, POSTCOPY_INCOMING_RUNNING, POSTCOPY_INCOMING_END } PostcopyState; In the case where ram_load is executed and postcopy_state is POSTCOPY_INCOMING_END, postcopy_running will be set to 'true' and ram_load will behave like a postcopy is in progress. This scenario isn't achievable in a migration but it is reproducible when executing savevm/loadvm after migrating with 'postcopy-ram on', causing loadvm to fail with Error -22: Source: (qemu) migrate_set_capability postcopy-ram on (qemu) migrate tcp:127.0.0.1:4444 Dest: (qemu) migrate_set_capability postcopy-ram on (qemu) ubuntu1704-intel login: Ubuntu 17.04 ubuntu1704-intel ttyS0 ubuntu1704-intel login: (qemu) (qemu) savevm test1 (qemu) loadvm test1 Unknown combination of migration flags: 0x4 (postcopy mode) error while loading state for instance 0x0 of device 'ram' Error -22 while loading VM state (qemu) This patch fixes this problem by changing the existing logic for postcopy_advised and postcopy_running in ram_load, making them 'false' if we're at POSTCOPY_INCOMING_END state. Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> CC: Juan Quintela <quintela@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-29migration: Make xbzrle_cache_size a migration parameterJuan Quintela
Right now it is a variable in MigrationState instead of a MigrationParameter. The change allows to set it as the rest of the Migration parameters, from the command line, with query_migration_paramters, set_migrate_parameters, etc. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-29migration: No need to return the size of the cacheJuan Quintela
After the previous commits, we make sure that the value passed is right, or we just drop an error. So now we return if there is one error or we have setup correctly the value passed. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- Improve error messasge Return 0 always for success
2017-10-29migration: Don't play games with the requested cache sizeJuan Quintela
Now that we check that the value passed is a power of 2, we don't need to play games when comparing what is the size that is going to take the cache. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-23migration: add bitmap for received pageAlexey Perevalov
This patch adds ability to track down already received pages, it's necessary for calculation vCPU block time in postcopy migration feature, and for recovery after postcopy migration failure. Also it's necessary to solve shared memory issue in postcopy livemigration. Information about received pages will be transferred to the software virtual bridge (e.g. OVS-VSWITCHD), to avoid fallocate (unmap) for already received pages. fallocate syscall is required for remmaped shared memory, due to remmaping itself blocks ioctl(UFFDIO_COPY, ioctl in this case will end with EEXIT error (struct page is exists after remmap). Bitmap is placed into RAMBlock as another postcopy/precopy related bitmaps. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: postcopy_place_page factoring outAlexey Perevalov
Need to mark copied pages as closer as possible to the place where it tracks down. That will be necessary in futher patch. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: new ram_init_bitmaps()Peter Xu
Rearrange the bitmap initialization and the first sync. Since at it, make sure the locks are taken/released in correct order (I moved RCU unlock upper - though it may not affect much). Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: clean up xbzrle cache init/destroyPeter Xu
Let's further simplify ram_init_all() and ram_save_cleanup() by abstract all the XBZRLE related codes into their own functions. When allocating xbzrle cache, we are always very careful on -ENOMEM; which makes sense. Replacing the last g_malloc0() with g_try_malloc0(), then refactor the logic a bit. This patch should be fixing some memory leaks when some memory allocation failed for XBZRLE in the past. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: provide ram_state_cleanupPeter Xu
There are two Mutexes that are created but not yet destroyed for RAMState. Fix that. Since we are at it, provide helper function to clean up RAMState. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: provide ram_state_init()Peter Xu
The old ram_state_init() is not really initializing the RAMState only, but including lots of other stuff that is RAM-related. Renaming it to ram_init_all(). Instead, provide a real ram_state_init(). Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: Make cache_init() take an error parameterJuan Quintela
Once there, take a total size instead of the size of the pages. We move the check that the new_size is bigger than one page from xbzrle_cache_resize(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Fix typo spotted by Peter Xu
2017-10-23migration: Move xbzrle cache resize error handling to xbzrle_cache_resizeJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-09-27migration: disable auto-converge during bulk block migrationPeter Lieven
auto-converge and block migration currently do not play well together. During block migration the auto-converge logic detects that ram migration makes no progress and thus throttles down the vm until it nearly stalls completely. Avoid this by disabling the throttling logic during the bulk phase of the block migration. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1506421996-12513-1-git-send-email-pl@kamp.de> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-22migration: fix ram_save_pendingVladimir Sementsov-Ogievskiy
Fill postcopy-able pending only if ram postcopy is enabled. It is necessary because of there will be other postcopy-able states and when ram postcopy is disabled, it should not spoil common postcopy related pending. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: add has_postcopy savevm handlerVladimir Sementsov-Ogievskiy
Now postcopy-able states are recognized by not NULL save_live_complete_postcopy handler. But when we have several different postcopy-able states, it is not convenient. Ram postcopy may be disabled, while some other postcopy enabled, in this case Ram state should behave as it is not postcopy-able. This patch add separate has_postcopy handler to specify behaviour of savevm state. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: Create multifd migration threadsJuan Quintela
Creation of the threads, nothing inside yet. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- Use pointers instead of long array names Move to use semaphores instead of conditions as paolo suggestion Put all the state inside one struct. Use a counter for the number of threads created. Needed during cancellation. Add error return to thread creation Add id field Rename functions to multifd_save/load_setup/cleanup Change recv parameters to a pointer to struct Change back to a struct Use Error * for _cleanup
2017-08-02migration: fix comment disorder in RAMStatePeter Xu
Comments for "migration_dirty_pages" and "bitmap_mutex" are switched. Fix it. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1501666880-10159-2-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Make compression_threads use save/load_setup/cleanup()Juan Quintela
Once there, be consistent and use compress_thread_{save,load}_{setup,cleanup}. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170628095228.4661-6-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Convert ram to use new load_setup()/load_cleanup()Juan Quintela
Once there, I rename ram_migration_cleanup() to ram_save_cleanup(). Notice that this is the first pass, and I only passed XBZRLE to the new scheme. Moved decoded_buf to inside XBZRLE struct. As a bonus, I don't have to export xbzrle functions from ram.c. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- loaded_data pointer was needed because called can change it (dave) spell loaded correctly in comment (dave) Message-Id: <20170628095228.4661-5-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename cleanup() to save_cleanup()Juan Quintela
We need a cleanup for loads, so we rename here to be consistent. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- Rename htab_cleanup to htap_save_cleanup as dave suggestion Message-Id: <20170628095228.4661-3-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename save_live_setup() to save_setup()Juan Quintela
We are going to use it now for more than save live regions. Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170628095228.4661-2-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-14migration: Don't create decompression threads if not enabledJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- I removed the [HACK] part because previous patch just check that compression pages are not received.
2017-06-14migration: Test for disabled features on receptionJuan Quintela
Right now, if we receive a compressed page while this features are disabled, Bad Things (TM) can happen. Just add a test for them. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- I had XBZRLE here also, but it don't need extra resources on destination, only on source. Additionally libvirt don't enable it on destination, so don't put it here. - initialize invalid_flags at declaration time. - remove extra space (peter)
2017-06-14migration: Remove unneeded includesJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: Move migration.h to migration/Juan Quintela
Nothing uses it outside of migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Split registration functions from vmstate.hJuan Quintela
They are indpendent, and nowadays almost every device register things with qdev->vmsd. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-07ram: Make RAMState dynamicJuan Quintela
We create the variable while we are at migration and we remove it after migration. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-07ram: Use MigrationStats for statisticsJuan Quintela
RAM Statistics need to survive migration to make info migrate work, so we need to store them outside of RAMState. As we already have an struct with those fields, just used them. (MigrationStats and XBZRLECacheStats). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-07ram: Move ZERO_TARGET_PAGE inside XBZRLEJuan Quintela
It was only used by XBZRLE anyways. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-07ram: Call migration_page_queue_free() at ram_migration_cleanup()Juan Quintela
We shouldn't be using memory later than that. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-01migration: Export ram.c functions in its own fileJuan Quintela
All functions are internal except for ram_mig_init(). Create migration/misc.h for this kind of functions. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-01migration: Split qemu-file.hJuan Quintela
Split the file into public and internal interfaces. I have to rename the external one because we can't have two include files with the same name in the same directory. Build system gets confused. The only exported functions are the ones that handle basic types. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-31migration: use dirty_rate_high_cnt more aggressivelyFelipe Franciosi
The commit message from 070afca25 suggests that dirty_rate_high_cnt should be used more aggressively to start throttling after two iterations instead of four. The code, however, only changes the auto convergence behaviour to throttle after three iterations. This makes the behaviour more aggressive by kicking off throttling after two iterations as originally intended. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-31migration: set bytes_xfer_* outside of autoconverge logicFelipe Franciosi
The bytes_xfer_now/prev counters are only used by the auto convergence logic. However, they are used alongside the dirty_pages_rate counter, which is calculated (and required) outside of this logic. The problem with this approach is that if the auto convergence capability is changed while a migration is ongoing, the relationship of the counters will be broken. This moves the management of bytes_xfer_now/prev counters outside of the auto convergence logic to address this issue. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-31migration: set dirty_pages_rate before autoconverge logicFelipe Franciosi
Currently, a "period" in the RAM migration logic is at least a second long and accounts for what happened since the last period (or the beginning of the migration). The dirty_pages_rate counter is calculated at the end this logic. If the auto convergence capability is enabled from the start of the migration, it won't be able to use this counter the first time around. This calculates dirty_pages_rate as soon as a period is deemed over, which allows for it to be used immediately. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-31migration: keep bytes_xfer_prev init'd to zeroFelipe Franciosi
The first time migration_bitmap_sync() is called, bytes_xfer_prev is set to ram_state.bytes_transferred which is, at this point, zero. The next time migration_bitmap_sync() is called, an iteration has happened and bytes_xfer_prev is set to 'x' bytes. Most likely, more than one second has passed, so the auto converge logic will be triggered and bytes_xfer_now will also be set to 'x' bytes. This condition is currently masked by dirty_rate_high_cnt, which will wait for a few iterations before throttling. It would otherwise always assume zero bytes have been copied and therefore throttle the guest (possibly) prematurely. Given bytes_xfer_prev is only used by the auto convergence logic, it makes sense to only set its value after a check has been made against bytes_xfer_now. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-18migration: Remove vmstate.h from migration.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- Minor rearrangements due to rebase
2017-05-18migration: Remove qemu-file.h from vmstate.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- minor rearangements due to the rebase
2017-05-18migration: Create migration/xbzrle.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-18migration: Fix non-multiple of page size migrationDr. David Alan Gilbert
Unfortunately it's legal to create a VM with a RAM size that's not a multiple of the underlying host page or huge page size. Recently I'd changed things to always send host sized pages, and that breaks if we have say a 1025MB guest on 2MB hugepages. Unfortunately we can't just make that illegal since it would break migration from/to existing oddly configured VMs. Symptom: qemu-system-x86_64: Illegal RAM offset 40100000 as it transmits the fraction of the hugepage after the end of the RAMBlock (may also cause a crash on the source - possibly due to clearing bits after the bitmap) Reported-by: Yumei Huang <yuhuang@redhat.com> Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1449037 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-18Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into stagingStefan Hajnoczi
HMP pull # gpg: Signature made Wed 17 May 2017 07:03:39 PM BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * dgilbert/tags/pull-hmp-20170517: ramblock: add new hmp command "info ramblock" utils: provide size_to_str() ramblock: add RAMBLOCK_FOREACH() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-17ramblock: add RAMBLOCK_FOREACH()Peter Xu
So that it can simplifies the iterators. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-2-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17ram: Rename RAM_SAVE_FLAG_COMPRESS to RAM_SAVE_FLAG_ZEROJuan Quintela
Reflects better what it does now, and avoid confussions with RAM_SAVE_FLAG_COMPRESS_PAGE. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-17migration: Fix regression with compression threadsJuan Quintela
Compression threads got broken on commit commit 247956946651ae0280f7b1ea88bb6237dd01c231 Author: Juan Quintela <quintela@redhat.com> Date: Tue Mar 21 11:45:01 2017 +0100 ram: reorganize last_sent_block On do_compress_ram_page() we use a different QEMUFile than the migration one. We need to pass it there. The failure can be seen as: (qemu) qemu-system-x86_64: Unknown combination of migration flags: 0 qemu-system-x86_64: error while loading state section id 3(ram) qemu-system-x86_64: load of migration failed: Invalid argument Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com>
2017-05-04migration: Extra tracingDr. David Alan Gilbert
A couple more traces that would have made fixing that postcopy bug a bit easier. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-04migration: Move postcopy-ram.h to migration/Juan Quintela
It is internal to migration, not intended for other users. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04ram: Split dirty bitmap by RAMBlockJuan Quintela
Both the ram bitmap and the unsent bitmap are split by RAMBlock. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Fix compilation when DEBUG_POSTCOPY is enabled (thanks Hailiang)
2017-04-21ram: Remove migration_bitmap_extend()Juan Quintela
We have disabled memory hotplug, so we don't need to handle migration_bitamp there. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
2017-04-21ram: Use RAMBitmap type for coherenceJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 07:33:10 +0000