| Age | Commit message (Collapse) | Author |
|---|
|
We're about to add more functions to this file so make it use the same
coding style as the rest of the code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230607161306.31425-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
|
|
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
In the past, we had to put the in the main thread all the operations
related with sizes due to qemu_file not beeing thread safe. As now
all counters are atomic, we can update the counters just after the
do the write. As an aditional bonus, we are able to use the right
value for the compression methods. Right now we were assuming that
there were no compression at all.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230515195709.63843-17-quintela@redhat.com>
|
|
Since previous commit, we calculate how much data we have send with
migration_transferred_bytes() so no need to maintain this counter and
remember to always update it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-10-quintela@redhat.com>
|
|
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <88135197411df1a71d7832962b39abf60faf0021.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
It is not needed since we moved the accessor for tls properties to
options.c.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
|
|
migration_stats is just too long, and it is going to have more than
ram counters in the near future.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
|
|
There is already include/qemu/stats.h, so stats.h was a bad idea.
We want this file to not depend on anything else, we will move all the
migration counters/stats to this struct.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
|
|
We don't wait in the sem when we are doing a sync_main. Make it wait
there. To make things clearer, we mark the channel ready at the
begining of the thread loop.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
|
|
Once that we are there, we rename the function to
migrate_zero_copy_send() to be consistent with all other capabilities.
We can remove the CONFIG_LINUX guard. We already check that we can't
setup this capability in migrate_caps_check().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
|
|
Once that we are there, we rename the function to migrate_multifd()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
|
|
In the spirit of:
commit 394d323bc3451e4d07f13341cb8817fac8dfbadd
Author: Peter Xu <peterx@redhat.com>
Date: Tue Oct 11 17:55:51 2022 -0400
migration: Use atomic ops properly for page accountings
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Using MgrationStats as type for ram_counters mean that we didn't have
to re-declare each value in another struct. The need of atomic
counters have make us to create MigrationAtomicStats for this atomic
counters.
Create RAMStats type which is a merge of MigrationStats and
MigrationAtomicStats removing unused members.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
Fix typos found by David Edmondson
|
|
The p->flags could be updated via the send_prepare callback, e.g. OR-ed
with MULTIFD_FLAG_ZLIB via zlib_send_prepare. Assign p->flags to the
local "flags" before the send_prepare callback could only get partial of
p->flags. Fix it by moving the assignment of p->flags to the local flags
after the callback, so that the correct flags can be traced.
Fixes: ab7cbb0b9a3b ("multifd: Make no compression operations into its own structure")
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Currently running migration_incoming_state_destroy() without first running
multifd_load_cleanup() will cause a yank error:
qemu-system-x86_64: ../util/yank.c:107: yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
(core dumped)
The above error happens in the target host, when multifd is being used
for precopy, and then postcopy is triggered and the migration finishes.
This will crash the VM in the target host.
To avoid that, move multifd_load_cleanup() inside
migration_incoming_state_destroy(), so that the load cleanup becomes part
of the incoming state destroying process.
Running multifd_load_cleanup() twice can become an issue, though, but the
only scenario it could be ran twice is on process_incoming_migration_bh().
So removing this extra call is necessary.
On the other hand, this multifd_load_cleanup() call happens way before the
migration_incoming_state_destroy() and having this happening before
dirty_bitmap_mig_before_vm_start() and vm_start() may be a need.
So introduce a new function multifd_load_shutdown() that will mainly stop
all multifd threads and close their QIOChannels. Then use this function
instead of multifd_load_cleanup() to make sure nothing else is received
before dirty_bitmap_mig_before_vm_start().
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Current approach will only join threads that are still running.
For the threads not joined, resources or private memory are always kept in
the process space and never reclaimed before process end, and this risks
serious memory leaks.
This should usually not represent a big problem, since multifd migration
is usually just ran at most a few times, and after it succeeds there is
not much to be done before exiting the process.
Yet still, it should not hurt performance to join all of them.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Before assigning "p->quit = true" for every multifd channel,
multifd_load_cleanup() will call multifd_recv_terminate_threads() which
already does the same assignment, while protected by a mutex.
So there is no point doing the same assignment again.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Since it's introduction in commit f986c3d256 ("migration: Create multifd
migration threads"), multifd_load_cleanup() never returned any value
different than 0, neither set up any error on errp.
Even though, on process_incoming_migration_bh() an if clause uses it's
return value to decide on setting autostart = false, which will never
happen.
In order to simplify the codebase, change multifd_load_cleanup() signature
to 'void multifd_load_cleanup(void)', and for every usage remove error
handling or decision made based on return value != 0.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
The whole idea of multi-channel checks was not properly done, IMHO.
Currently we check multi-channel in a lot of places, but actually that's
not needed because we only need to check it right after we get the URI and
that should be it.
If the URI check succeeded, we should never need to check it again because
we must have it. If it check fails, we should fail immediately on either
the qmp_migrate or qmp_migrate_incoming, instead of failingg it later after
the connection established.
Neither should we fail any set capabiliities like what we used to do here:
5ad15e8614 ("migration: allow enabling mutilfd for specific protocol only", 2021-10-19)
Because logically the URI will only be set later after the capability is
set, so it doesn't make a lot of sense to check the URI type when setting
the capability, because we're checking the cap with an old URI passed in,
and that may not even be the URI we're going to use later.
This patch mostly reverted all such checks for before, dropping the
variable migrate_allow_multi_channels and helpers. Instead, add a common
helper to check URI for multi-channels for either qmp_migrate and
qmp_migrate_incoming and that should do all the proper checks. The failure
will only trigger with the "migrate" or "migrate_incoming" command, or when
user specified "-incoming xxx" where "xxx" is not "defer".
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Clean up some unnecessary code
Signed-off-by: Li Zhang <lizhang@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Cleanup multifd_channel_connect
Signed-off-by: Li Zhang <lizhang@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
To support query migration thread infomation, save and delete
thread(live_migration and multifdsend) information at thread
creation and finish.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Make IO channel flush call after the inflight request has been drained
in multifd thread, or else we may missed to flush the inflight request.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
In multifd_queue_page() MultiFDPages_t.block is checked twice.
Between the two checks, MultiFDPages_t.block may be reset to NULL
by multifd thread. This lead to the 2nd check always true then a
redundant page submitted to multifd thread again.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Current logic assumes that channel connections on the destination side are
always established in the same order as the source and the first one will
always be the main channel followed by the multifid or post-copy
preemption channel. This may not be always true, as even if a channel has a
connection established on the source side it can be in the pending state on
the destination side and a newer connection can be established first.
Basically causing out of order mapping of channels on the destination side.
Currently, all channels except post-copy preempt send a magic number, this
patch uses that magic number to decide the type of channel. This logic is
applicable only for precopy(multifd) live migration, as mentioned, the
post-copy preempt channel does not send any magic number. Also, tls live
migrations already does tls handshake before creating other channels, so
this issue is not possible with tls, hence this logic is avoided for tls
live migrations. This patch uses read peek to check the magic number of
channels so that current data/control stream management remains
un-effected.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: manish.mishra <manish.mishra@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
To prepare for thread-safety on page accountings, at least below counters
need to be accessed only atomically, they are:
ram_counters.transferred
ram_counters.duplicate
ram_counters.normal
ram_counters.postcopy_bytes
There are a lot of other counters but they won't be accessed outside
migration thread, then they're still safe to be accessed without atomic
ops.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We were recalculating it left and right. We plan to change that
values on next patches.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
|
|
We were calling qemu_target_page_size() left and right.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
|
|
Move flushing code from multifd_send_sync_main() to a new helper, and call
it in multifd_send_sync_main().
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Some errors, like the lack of Scatter-Gather support by the network
interface(NETIF_F_SG) may cause sendmsg(...,MSG_ZEROCOPY) to fail on using
zero-copy, which causes it to fall back to the default copying mechanism.
After each full dirty-bitmap scan there should be a zero-copy flush
happening, which checks for errors each of the previous calls to
sendmsg(...,MSG_ZEROCOPY). If all of them failed to use zero-copy, then
increment dirty_sync_missed_zero_copy migration stat to let the user know
about it.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220711211112.18951-4-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Add migrate_channel_requires_tls() to detect whether the specific channel
requires TLS, leveraging the recently introduced migrate_use_tls(). No
functional change intended.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185513.27421-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The qemu_file_update_transfer name doesn't give a clear guide on what
its purpose is, and how it differs from the qemu_file_credit_transfer
method. The latter is specifically for accumulating for total migration
traffic, while the former is specifically for accounting in thue rate
limit calculations. The new name give better guidance on its usage.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Implement zero copy send on nocomp_send_write(), by making use of QIOChannel
writev + flags & flush interface.
Change multifd_send_sync_main() so flush_zero_copy() can be called
after each iteration in order to make sure all dirty pages are sent before
a new iteration is started. It will also flush at the beginning and at the
end of migration.
Also make it return -1 if flush_zero_copy() fails, in order to cancel
the migration process, and avoid resuming the guest in the target host
without receiving all current RAM.
This will work fine on RAM migration because the RAM pages are not usually freed,
and there is no problem on changing the pages content between writev_zero_copy() and
the actual sending of the buffer, because this change will dirty the page and
cause it to be re-sent on a next iteration anyway.
A lot of locked memory may be needed in order to use multifd migration
with zero-copy enabled, so disabling the feature should be necessary for
low-privileged users trying to perform multifd migrations.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513062836.965425-9-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Since d48c3a0445 ("multifd: Use a single writev on the send side"),
sending the header packet and the memory pages happens in the same
writev, which can potentially make the migration faster.
Using channel-socket as example, this works well with the default copying
mechanism of sendmsg(), but with zero-copy-send=true, it will cause
the migration to often break.
This happens because the header packet buffer gets reused quite often,
and there is a high chance that by the time the MSG_ZEROCOPY mechanism get
to send the buffer, it has already changed, sending the wrong data and
causing the migration to abort.
It means that, as it is, the buffer for the header packet is not suitable
for sending with MSG_ZEROCOPY.
In order to enable zero copy for multifd, send the header packet on an
individual write(), without any flags, and the remanining pages with a
writev(), as it was happening before. This only changes how a migration
with zero-copy-send=true works, not changing any current behavior for
migrations with zero-copy-send=false.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513062836.965425-8-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Even though multifd_send_sync_main() currently emits error_reports, it's
callers don't really check it before continuing.
Change multifd_send_sync_main() to return -1 on error and 0 on success.
Also change all it's callers to make use of this change and possibly fail
earlier.
(This change is important to next patch on multifd zero copy
implementation, to make it sure an error in zero-copy flush does not go
unnoticed.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220513062836.965425-7-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
A lot of places check parameters.tls_creds in order to evaluate if TLS is
in use, and sometimes call migrate_get_current() just for that test.
Add new helper function migrate_use_tls() in order to simplify testing
for TLS usage.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513062836.965425-6-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
This variable, along with its helpers, is used to detect whether multiple
channel will be supported for migration. In follow up patches, there'll be
other capability that requires multi-channels. Hence move it outside multifd
specific code and make it public. Meanwhile rename it from "multifd" to
"multi_channels" to show its real meaning.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-5-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The hostname is cached N times, N equals to the multifd channels.
Drop that cache because after previous patch we've got s->hostname
being alive for the whole lifecycle of migration procedure.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
So we can remove the MultiFDPages.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename num_normal_pages to total_normal_pages (peter)
|
|
We are only sending normal pages through multifd channels.
Later on this series, we are going to also send zero pages.
We are going to detect if a page is zero or non zero in the multifd
channel thread, not on the main thread.
So we receive an array of pages page->offset[N]
And we will end with:
p->normal[N - zero_pages]
p->zero[zero_pages].
In this patch, we just copy all the pages in offset to normal.
for (i = 0; i < pages->num; i++) {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}
Later in the series this becomes:
for (i = 0; i < pages->num; i++) {
if (buffer_is_zero(page->offset[i])) {
p->zerol[p->zero_num] = pages->offset[i];
p->zero_num++:
} else {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}
}
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Improving comment (dave)
Renaming num_normal_pages to total_normal_pages (peter)
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Until now, we wrote the packet header with write(), and the rest of the
pages with writev(). Just increase the size of the iovec and do a
single writev().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Everything use now iov's.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
