aboutsummaryrefslogtreecommitdiff
path: root/migration/migration.c
AgeCommit message (Collapse)Author
2015-11-10End of migration for postcopyDr. David Alan Gilbert
Tweak the end of migration cleanup; we don't want to close stuff down at the end of the main stream, since the postcopy is still sending pages on the other thread. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Start up a postcopy/listener thread ready for incoming page dataDr. David Alan Gilbert
The loading of a device state (during postcopy) may access guest memory that's still on the source machine and thus might need a page fill; split off a separate thread that handles the incoming page data so that the original incoming migration code can finish off the device data. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Don't iterate on precopy-only devices during postcopyDr. David Alan Gilbert
During the postcopy phase we must not call the iterate method on precopy-only devices, since they may have done some cleanup during the _complete call at the end of the precopy phase. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Page request: Process incoming page requestDr. David Alan Gilbert
On receiving MIG_RPCOMM_REQ_PAGES look up the address and queue the page. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Page request: Add MIG_RP_MSG_REQ_PAGES reverse commandDr. David Alan Gilbert
Add MIG_RP_MSG_REQ_PAGES command on Return path for the postcopy destination to request a page from the source. Two versions exist: MIG_RP_MSG_REQ_PAGES_ID that includes a RAMBlock name and start/len MIG_RP_MSG_REQ_PAGES that just has start/len for use with the same RAMBlock as a previous MIG_RP_MSG_REQ_PAGES_ID Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Postcopy: End of iterationDr. David Alan Gilbert
The end of migration in postcopy is a bit different since some of the things normally done at the end of migration have already been done on the transition to postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Postcopy: Postcopy startup in migration threadDr. David Alan Gilbert
Rework the migration thread to setup and start postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10migration_completion: Take current stateDr. David Alan Gilbert
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we complete migration, and we need to know which we expect to be in to change state safely. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10MIGRATION_STATUS_POSTCOPY_ACTIVE: Add new migration stateDr. David Alan Gilbert
'MIGRATION_STATUS_POSTCOPY_ACTIVE' is entered after migrate_start_postcopy 'migration_in_postcopy' is provided for other sections to know if they're in postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10migration_completion: Take current stateDr. David Alan Gilbert
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we complete migration, and we need to know which we expect to be in to change state safely. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10migrate_start_postcopy: Command to trigger transition to postcopyDr. David Alan Gilbert
Once postcopy is enabled (with migrate_set_capability), the migration will still start on precopy mode. To cause a transition into postcopy the: migrate_start_postcopy command must be issued. Postcopy will start sometime after this (when it's next checked in the migration loop). Issuing the command before migration has started will error, and issuing after it has finished is ignored. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Modify save_live_pending for postcopyDr. David Alan Gilbert
Modify save_live_pending to return separate postcopiable and non-postcopiable counts. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Add wrappers and handlers for sending/receiving the postcopy-ram migration ↵Dr. David Alan Gilbert
messages. The state of the postcopy process is managed via a series of messages; * Add wrappers and handlers for sending/receiving these messages * Add state variable that track the current state of postcopy Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Add migration-capability boolean for postcopy-ram.Dr. David Alan Gilbert
The 'postcopy ram' capability allows postcopy migration of RAM; note that the migration starts off in precopy mode until postcopy mode is triggered (see the migrate_start_postcopy patch later in the series). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Rework loadvm path for subloopsDr. David Alan Gilbert
Postcopy needs to have two migration streams loading concurrently; one from memory (with the device state) and the other from the fd with the memory transactions. Split the core of qemu_loadvm_state out so we can use it for both. Allow the inner loadvm loop to quit and cause the parent loops to exit as well. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Return path: Source handling of return pathDr. David Alan Gilbert
Open a return path, and handle messages that are received upon it. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10migration_is_setup_or_activeDr. David Alan Gilbert
Add 'migration_is_setup_or_active' utility function to check state. (It gets postcopy added to it's list later on in the series) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Return path: Send responses from destination to sourceDr. David Alan Gilbert
Add migrate_send_rp_message to send a message from destination to source along the return path. (It uses a mutex to let it be called from multiple threads) Add migrate_send_rp_shut to send a 'shut' message to indicate the destination is finished with the RP. Add migrate_send_rp_ack to send a 'PONG' message in response to a PING Use it in the MSG_RP_PING handler Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Rename save_live_complete to save_live_complete_precopyDr. David Alan Gilbert
In postcopy we're going to need to perform the complete phase for postcopiable devices at a different point, start out by renaming all of the 'complete's to make the difference obvious. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10migrate_init: Call from savevmDr. David Alan Gilbert
Suspend to file is very much like a migrate, and it makes life easier if we have the Migration state available, so initialise it in the savevm.c code for suspending. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewd-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Rename mis->file to from_src_fileDr. David Alan Gilbert
'file' becomes confusing when you have flows in each direction; rename to make it clear. This leaves just the main forward direction ms->file, which is used in a lot of places and is probably not worth renaming given the churn. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-04migration: rename qemu_savevm_state_cancelLiang Li
The function qemu_savevm_state_cancel is called after the migration in migration_thread, it seems strange to 'cancel' it after completion, rename it to qemu_savevm_state_cleanup looks better. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com>al3 Reviewed-by: Amit Shah <amit.shah@redhat.com>al3 Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-11-04migration: defer migration_end & blk_mig_cleanupLiang Li
Because of the patch 3ea3b7fa9af067982f34b of kvm, which introduces a lazy collapsing of small sptes into large sptes mechanism, now migration_end() is a time consuming operation because it calls memroy_global_dirty_log_stop(), which will trigger the dropping of small sptes operation and takes about dozens of milliseconds, so call migration_end() before all the vmsate data has already been transferred to the destination will prolong VM downtime. This operation should be deferred after all the data has been transferred to the destination. blk_mig_cleanup() can be deferred too. For a VM with 8G RAM, this patch can reduce the VM downtime about 30 ms. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>al3 Reviewed-by: Amit Shah <amit.shah@redhat.com>al3 Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-10-15migration: announce VM's new home just before VM is runnableAmit Shah
We were announcing the dest host's IP as our new IP a bit too soon -- if there were errors detected after this announcement was done, the migration is failed and the VM could continue running on the src host -- causing problems later. Move around the qemu_announce_self() call so it's done just before the VM is runnable. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-10-15Migration: Generate the completed event only when we completeDr. David Alan Gilbert
The current migration-completed event is generated a bit too early, which means that an eager libvirt that's ready to go as soon as it sees the event ends up racing with the actual end of migration. This corresponds to RH bug: https://bugzilla.redhat.com/show_bug.cgi?id=1271145 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> xSigned-off-by: Juan Quintela <quintela@redhat.com>
2015-09-30migration: Disambiguate MAX_THROTTLEJason J. Herne
Migration has a define for MAX_THROTTLE. Update comment to clarify that this is used for throttling transfer speed. Hopefully this will prevent it from being confused with a guest cpu throttling entity. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-30qmp/hmp: Add throttle ratio to query-migrate and info migrateJason J. Herne
Report throttle percentage in info migrate and query-migrate responses when cpu throttling is active. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-30migration: Dynamic cpu throttling for auto-convergeJason J. Herne
Remove traditional auto-converge static 30ms throttling code and replace it with a dynamic throttling algorithm. Additionally, be more aggressive when deciding when to start throttling. Previously we waited until four unproductive memory passes. Now we begin throttling after only two unproductive memory passes. Four seemed quite arbitrary and only waiting for two passes allows us to complete the migration faster. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-30migration: Parameters for auto-converge cpu throttlingJason J. Herne
Add migration parameters to allow the user to adjust the parameters that control cpu throttling when auto-converge is in effect. The added parameters are as follows: x-cpu-throttle-initial : Initial percantage of time guest cpus are throttled when migration auto-converge is activated. x-cpu-throttle-increment: throttle percantage increase each time auto-converge detects that migration is not making progress. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-29migration: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Same Coccinelle semantic patch as in commit b45c03f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1442231491-23352-1-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2015-09-29Split out end of migration code from migration_threadDr. David Alan Gilbert
The code that gets run at the end of the migration process is getting large, and I'm about to add more for postcopy. Split it into a separate function. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1439463094-5394-3-git-send-email-dgilbert@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2015-08-03migration: Fix global state with Xen.Anthony PERARD
When doing migration via the QMP command xen_save_devices_state, the current runstate is not store into the global state section. Also the current runstate is not the one we want on the receiver side. During migration, the Xen toolstack paused QEMU before save the devices state. Also, the toolstack expect QEMU to autostart when the migration is finished. So this patch store "running" as it's current runstate. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-07-24rcu: actually register threads that have RCU read-side critical sectionsPaolo Bonzini
Otherwise, grace periods are detected too early! Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-15migration: We also want to store the global state for savevmJuan Quintela
Commit df4b1024526cae3479da3492d6371fd4a7324a03 introduced global_state section. But it only filled the state while doing migration. While doing a savevm, we stored an empty string as state. So when we did a loadvm, it complained that state was invalid. Fedora 21, 4.1.1, qemu 2.4.0-rc0 > ../../configure --target-list="x86_64-softmmu" 068 2s ... - output mismatch (see 068.out.bad) --- /home/bos/jhuston/src/qemu/tests/qemu-iotests/068.out 2015-07-08 17:56:18.588164979 -0400 +++ 068.out.bad 2015-07-09 17:39:58.636651317 -0400 @@ -6,6 +6,8 @@ QEMU X.Y.Z monitor - type 'help' for more information (qemu) savevm 0 (qemu) quit +qemu-system-x86_64: Unknown savevm section or instance 'globalstate' 0 +qemu-system-x86_64: Error -22 while loading VM state QEMU X.Y.Z monitor - type 'help' for more information (qemu) quit *** done Failures: 068 Failed 1 of 1 tests Actually, there were two problems here: - we registered global_state too late for load_vm (fixed on another patch on the list) - we didn't store a valid state for savevm (fixed by this patch). Reported-by: John Snow <jsnow@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-15migration: Trace event and migration event are different thingsJuan Quintela
We can want the trace event even without migration events enabled. Reported-by: Wen Congyang <ghostwcy@gmail.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-15migration: Only change state after migration has finishedJuan Quintela
On previous change, we changed state at post load time if it was not running, special casing the "running" change. Now, we change any states at the end of the migration. Signed-off-by: Juan Quintela <quintela@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-07-07migration: Add migration events on target sideJuan Quintela
We reuse the migration events from the source side, sending them on the appropiate place. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07migration: Make events a capabilityJuan Quintela
Make check fails with events. THis is due to the parser/lexer that it uses. Just in case that they are more broken parsers, just only send events when there are capabilities. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07migration: create migration eventJuan Quintela
We have one argument that tells us what event has happened. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-07-07migration: No need to call trace_migrate_set_state()Juan Quintela
We now use the helper everywhere, so no need to call this on this two places. See on previous commit that there were a place where we missed to mark the trace. Now all tracing is done in migrate_set_state(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07migration: Use always helper to set stateJuan Quintela
There were three places that were not using the migrate_set_state() helper, just fix that. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07migration: ensure we start in NONE stateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07migration: Use cmpxchg correctlyJuan Quintela
cmpxchg returns the old value Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07global_state: Make section optionalJuan Quintela
This section would be sent: a- for all new machine types b- for old machine types if section state is different form {running,paused} that were the only giving us troubles. So, in new qemus: it is alwasy there. In old qemus: they are only there if it an error has happened, basically stoping on target. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07migration: create new section to store global stateJuan Quintela
This includes a new section that for now just stores the current qemu state. Right now, there are only one way to control what is the state of the target after migration. - If you run the target qemu with -S, it would start stopped. - If you run the target qemu without -S, it would run just after migration finishes. The problem here is what happens if we start the target without -S and there happens one error during migration that puts current state as -EIO. Migration would ends (notice that the error happend doing block IO, network IO, i.e. nothing related with migration), and when migration finish, we would just "continue" running on destination, probably hanging the guest/corruption data, whatever. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-06-22Include monitor/monitor.h exactly where neededMarkus Armbruster
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-12Move loadvm_handlers into MigrationIncomingStateDr. David Alan Gilbert
In postcopy we need the loadvm_handlers to be used in a couple of different instances of the loadvm loop/routine, and thus it can't be local any more. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 09:11:10 +0000