| Age | Commit message (Collapse) | Author |
|---|
|
This introduces a special callback which allows to run code from some MMIO
devices.
SysBusDevice with a MemoryRegion which implements the request_ptr callback will
be notified when the guest try to execute code from their offset. Then it will
be able to eg: pre-load some code from an SPI device or ask a pointer from an
external simulator, etc..
When the pointer or the data in it are no longer valid the device has to
invalidate it.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Now unnecessary since ivshmem uses memory_region_init_ram_from_fd.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170602141229.15326-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new function to initialize a RAM memory region with a file
descriptor to be mmap-ed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170602141229.15326-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We were always passing in that one as "false" to assume that's an read
operation, and we also assume that IOMMU translation would always have
that read permission. A better permission would be IOMMU_NONE since the
replay is after all not a real read operation, but just a page table
rebuilding process.
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
This patch converts the old "is_write" bool into IOMMUAccessFlags. The
difference is that "is_write" can only express either read/write, but
sometimes what we really want is "none" here (neither read nor write).
Replay is an good example - during replay, we should not check any RW
permission bits since thats not an actual IO at all.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
This patch adds support for getting and using a local copy of the dirty
bitmap.
memory_region_snapshot_and_clear_dirty() will create a snapshot of the
dirty bitmap for the specified range, clear the dirty bitmap and return
the copy. The returned bitmap can be a bit larger than requested, the
range is expanded so the code can copy unsigned longs from the bitmap
and avoid atomic bit update operations.
memory_region_snapshot_get_dirty() will return the dirty status of
pages, pretty much like memory_region_get_dirty(), but using the copy
returned by memory_region_copy_and_clear_dirty().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Originally we have one memory_region_iommu_replay() function, which is
the default behavior to replay the translations of the whole IOMMU
region. However, on some platform like x86, we may want our own replay
logic for IOMMU regions. This patch adds one more hook for IOMMUOps for
the callback, and it'll override the default if set.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-6-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Generalizing the notify logic in memory_region_notify_iommu() into a
single function. This can be further used in customized replay()
functions for IOMMUs.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-5-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
This is an "global" version of existing memory_region_iommu_replay() -
we announce the translations to all the registered notifiers, instead of
a specific one.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-4-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
A new macro is provided to iterate all the IOMMU notifiers hooked
under specific IOMMU memory region.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-3-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
In this patch, IOMMUNotifier.{start|end} are introduced to store section
information for a specific notifier. When notification occurs, we not
only check the notification type (MAP|UNMAP), but also check whether the
notified iova range overlaps with the range of specific IOMMU notifier,
and skip those notifiers if not in the listened range.
When removing an region, we need to make sure we removed the correct
VFIOGuestIOMMU by checking the IOMMUNotifier.start address as well.
This patch is solving the problem that vfio-pci devices receive
duplicated UNMAP notification on x86 platform when vIOMMU is there. The
issue is that x86 IOMMU has a (0, 2^64-1) IOMMU region, which is
splitted by the (0xfee00000, 0xfeefffff) IRQ region. AFAIK
this (splitted IOMMU region) is only happening on x86.
This patch also helps vhost to leverage the new interface as well, so
that vhost won't get duplicated cache flushes. In that sense, it's an
slight performance improvement.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-2-git-send-email-peterx@redhat.com>
[ehabkost: included extra vhost_iommu_region_del() change from Peter Xu]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
clear pending status before calling memory commit.
Otherwise when memory_region_finalize is called,
memory_region_transaction_depth is 0 and
memory_region_update_pending is true.
That's wrong.
Signed-off -by: Anthony Xu <anthony.xu@intel.com>
Message-Id: <4712D8F4B26E034E80552F30A67BE0B1A2E3D5@ORSMSX112.amr.corp.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The address of memory regions might overflow when something wrong
happened, like reported in:
https://lists.gnu.org/archive/html/qemu-devel/2017-03/msg02043.html
For easier debugging, let's try to detect it.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1489496187-624-1-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
"info mtree -f" output is currently hard to use for large RAM regions, because
there is no hint as to what part of the region is being mapped. Add the offset
if it is nonzero.
Secondly, FlatView has a readonly field, that can override the MemoryRegion
in the presence of aliases. Take it into account.
Together, with this patch this:
address-space (flat view): KVM-SMRAM
0000000000000000-00000000000bffff (prio 0, ram): pc.ram
00000000000c0000-00000000000c9fff (prio 0, ram): pc.ram
00000000000ca000-00000000000ccfff (prio 0, ram): pc.ram
00000000000cd000-00000000000ebfff (prio 0, ram): pc.ram
00000000000ec000-00000000000effff (prio 0, ram): pc.ram
00000000000f0000-00000000000fffff (prio 0, ram): pc.ram
0000000000100000-00000000bfffffff (prio 0, ram): pc.ram
00000000fd000000-00000000fdffffff (prio 1, ram): vga.vram
00000000febc0000-00000000febdffff (prio 1, i/o): e1000-mmio
00000000febf0400-00000000febf041f (prio 0, i/o): vga ioports remapped
00000000febf0500-00000000febf0515 (prio 0, i/o): bochs dispi interface
00000000febf0600-00000000febf0607 (prio 0, i/o): qemu extended regs
00000000fec00000-00000000fec00fff (prio 0, i/o): kvm-ioapic
00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
00000000fee00000-00000000feefffff (prio 4096, i/o): kvm-apic-msi
00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
0000000100000000-000000013fffffff (prio 0, ram): pc.ram
becomes this:
address-space (flat view): KVM-SMRAM
0000000000000000-00000000000bffff (prio 0, ram): pc.ram
00000000000c0000-00000000000c9fff (prio 0, rom): pc.ram @00000000000c0000
00000000000ca000-00000000000ccfff (prio 0, ram): pc.ram @00000000000ca000
00000000000cd000-00000000000ebfff (prio 0, rom): pc.ram @00000000000cd000
00000000000ec000-00000000000effff (prio 0, ram): pc.ram @00000000000ec000
00000000000f0000-00000000000fffff (prio 0, rom): pc.ram @00000000000f0000
0000000000100000-00000000bfffffff (prio 0, ram): pc.ram @0000000000100000
00000000fd000000-00000000fdffffff (prio 1, ram): vga.vram
00000000febc0000-00000000febdffff (prio 1, i/o): e1000-mmio
00000000febf0400-00000000febf041f (prio 0, i/o): vga ioports remapped
00000000febf0500-00000000febf0515 (prio 0, i/o): bochs dispi interface
00000000febf0600-00000000febf0607 (prio 0, i/o): qemu extended regs
00000000fec00000-00000000fec00fff (prio 0, i/o): kvm-ioapic
00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
00000000fee00000-00000000feefffff (prio 4096, i/o): kvm-apic-msi
00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
0000000100000000-000000013fffffff (prio 0, ram): pc.ram @00000000c0000000
This should make it easier to understand what's going on.
Cc: Peter Xu <peterx@redhat.com>
Cc: "William Tambe" <tambewilliam@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
At the moment ram device's memory regions are DEVICE_NATIVE_ENDIAN. It's
incorrect. This memory region is backed by a MMIO area in host, so the
uint64_t data that MemoryRegionOps read from/write to this area should be
host-endian rather than target-endian. Hence, current code does not work
when target and host endianness are different which is the most common case
on PPC64. To fix it, this introduces DEVICE_HOST_ENDIAN for the ram device.
This has been tested on PPC64 BE/LE host/guest in all possible combinations
including TCG.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Message-Id: <1488171164-28319-1-git-send-email-xyjxie@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Make it easy to unregister a MemoryListener without tracking whether it
had been registered before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Adding one more option "-f" for "info mtree" to dump the flat views of
all the address spaces.
This will be useful to debug the memory rendering logic, also it'll be
much easier with it to know what memory region is handling what address
range.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We were dumping RW bits for each memory region, that might be confusing.
It'll make more sense to dump the memory region type directly rather
than the RW bits since that's how the bits are derived.
Meanwhile, with some slight cleanup in the function.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
|
|
With a vfio assigned device we lay down a base MemoryRegion registered
as an IO region, giving us read & write accessors. If the region
supports mmap, we lay down a higher priority sub-region MemoryRegion
on top of the base layer initialized as a RAM device pointer to the
mmap. Finally, if we have any quirks for the device (ie. address
ranges that need additional virtualization support), we put another IO
sub-region on top of the mmap MemoryRegion. When this is flattened,
we now potentially have sub-page mmap MemoryRegions exposed which
cannot be directly mapped through KVM.
This is as expected, but a subtle detail of this is that we end up
with two different access mechanisms through QEMU. If we disable the
mmap MemoryRegion, we make use of the IO MemoryRegion and service
accesses using pread and pwrite to the vfio device file descriptor.
If the mmap MemoryRegion is enabled and results in one of these
sub-page gaps, QEMU handles the access as RAM, using memcpy to the
mmap. Using either pread/pwrite or the mmap directly should be
correct, but using memcpy causes us problems. I expect that not only
does memcpy not necessarily honor the original width and alignment in
performing a copy, but it potentially also uses processor instructions
not intended for MMIO spaces. It turns out that this has been a
problem for Realtek NIC assignment, which has such a quirk that
creates a sub-page mmap MemoryRegion access.
To resolve this, we disable memory_access_is_direct() for ram_device
regions since QEMU assumes that it can use memcpy for those regions.
Instead we access through MemoryRegionOps, which replaces the memcpy
with simple de-references of standard sizes to the host memory.
With this patch we attempt to provide unrestricted access to the RAM
device, allowing byte through qword access as well as unaligned
access. The assumption here is that accesses initiated by the VM are
driven by a device specific driver, which knows the device
capabilities. If unaligned accesses are not supported by the device,
we don't want them to work in a VM by performing multiple aligned
accesses to compose the unaligned access. A down-side of this
philosophy is that the xp command from the monitor attempts to use
the largest available access weidth, unaware of the underlying
device. Using memcpy had this same restriction, but at least now an
operator can dump individual registers, even if blocks of device
memory may result in access widths beyond the capabilities of a
given device (RTL NICs only support up to dword).
Reported-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Setting skip_dump on a MemoryRegion allows us to modify one specific
code path, but the restriction we're trying to address encompasses
more than that. If we have a RAM MemoryRegion backed by a physical
device, it not only restricts our ability to dump that region, but
also affects how we should manipulate it. Here we recognize that
MemoryRegions do not change to sometimes allow dumps and other times
not, so we replace setting the skip_dump flag with a new initializer
so that we know exactly the type of region to which we're applying
this behavior.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Avoid walking the FlatView of all address spaces. Most of the
address spaces will have no log_sync callback on their listeners.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Only return a nonzero dirty_log_mask for RAM/ROM memory regions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This speeds up MEMORY_LISTENER_CALL noticeably. Right now,
with many PCI devices you have N regions added to M AddressSpaces
(M = # PCI devices with bus-master enabled) and each call looks
up the whole listener list, with at least M listeners in it.
Because most of the regions in N are BARs, which are also roughly
proportional to M, the whole thing is O(M^3). This changes it
to O(M^2), which is the best we can do without rewriting the
whole thing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is none, so just drop the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Migrating a VM during reboot sometimes results in differences
between the source and destination in the SMRAM area.
This is because migration_bitmap_sync() only fetches from KVM
the dirty log of address_space_memory. SMRAM memory slots
are ignored and the modifications to SMRAM are not sent to the
destination.
Reported-by: He Rongguang <herongguang.he@huawei.com>
Reviewed-by: He Rongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The new interface can be used to replace the old notify_started() and
notify_stopped(). Meanwhile it provides explicit flags so that IOMMUs
can know what kind of notifications it is requested for.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
IOMMU Notifier list is used for notifying IO address mapping changes.
Currently VFIO is the only user.
However it is possible that future consumer like vhost would like to
only listen to part of its notifications (e.g., cache invalidations).
This patch introduced IOMMUNotifier and IOMMUNotfierFlag bits for a
finer grained control of it.
IOMMUNotifier contains a bitfield for the notify consumer describing
what kind of notification it is interested in. Currently two kinds of
notifications are defined:
- IOMMU_NOTIFIER_MAP: for newly mapped entries (additions)
- IOMMU_NOTIFIER_UNMAP: for entries to be removed (cache invalidates)
When registering the IOMMU notifier, we need to specify one or multiple
types of messages to listen to.
When notifications are triggered, its type will be checked against the
notifier's type bits, and only notifiers with registered bits will be
notified.
(For any IOMMU implementation, an in-place mapping change should be
notified with an UNMAP followed by a MAP.)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is equivalent to memory_region_destructor_ram, use that one.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It doesn't make sense to pass a NULL ops argument to
memory_region_init_rom_device(), because the effect will
be that if the guest tries to write to the memory region
then QEMU will segfault. Catch the bug earlier by sanity
checking the arguments to this function, and remove the
misleading documentation that suggests that passing NULL
might be sensible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1467122287-24974-4-git-send-email-peter.maydell@linaro.org
|
|
Provide a new helper function memory_region_init_rom() for memory
regions which are read-only (and unlike those created by
memory_region_init_rom_device() don't have special behaviour
for writes). This has the same behaviour as calling
memory_region_init_ram() and then memory_region_set_readonly()
(which is what we do today in boards with pure ROMs) but is a
more easily discoverable API for the purpose.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1467122287-24974-2-git-send-email-peter.maydell@linaro.org
|
|
The IOMMU driver may change behavior depending on whether a notifier
client is present. In the case of POWER, this represents a change in
the visibility of the IOTLB, for other drivers such as intel-iommu and
future AMD-Vi emulation, notifier support is not yet enabled and this
provides the opportunity to flag that incompatibility.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[new log & extracted from [PATCH qemu v17 12/12] spapr_iommu, vfio, memory: Notify IOMMU about starting/stopping listening]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every IOMMU has some granularity which MemoryRegionIOMMUOps::translate
uses when translating, however this information is not available outside
the translate context for various checks.
This adds a get_min_page_size callback to MemoryRegionIOMMUOps and
a wrapper for it so IOMMU users (such as VFIO) can know the minimum
actual page size supported by an IOMMU.
As IOMMU MR represents a guest IOMMU, this uses TARGET_PAGE_SIZE
as fallback.
This removes vfio_container_granularity() and uses new helper in
memory_region_iommu_replay() when replaying IOMMU mappings on added
IOMMU memory region.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[dwg: Removed an unnecessary calculation]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Let users of qemu_get_ram_ptr and qemu_ram_ptr_length pass in an
address that is relative to the MemoryRegion. This basically means
what address_space_translate returns.
Because the semantics of the second parameter change, rename the
function to qemu_map_ram_ptr.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the old qemu_ram_addr_from_host to memory_region_from_host and
make it return an offset within the region. For qemu_ram_addr_from_host
return the ram_addr_t directly, similar to what it was before
commit 1b5ec23 ("memory: return MemoryRegion from qemu_ram_addr_from_host",
2013-07-04).
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove direct uses of ram_addr_t and optimize memory_region_{get,set}_fd
now that a MemoryRegion knows its RAMBlock directly.
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This reverts commit 5b5660adf1fdb61db14ec681b10463b8cba633f1,
as it breaks the UEFI guest firmware (known as ArmVirtPkg or AAVMF)
running in the "virt" machine type of "qemu-system-aarch64":
Contrary to the commit message, (a->mr == b->mr) does *not* imply
that (a->romd_mode == b->romd_mode): the pflash device model calls
memory_region_rom_device_set_romd() -- for switching between the above
modes --, and that function changes mr->romd_mode but the current
AddressSpaceDispatch's FlatRange keeps the old value. Therefore
region_del/region_add are not called on the KVM MemoryListener.
Reported-by: Drew Jones <drjones@redhat.com>
Tested-by: Drew Jones <drjones@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
mr->ram_block->offset is already aligned to both host and target size
(see qemu_ram_alloc_internal). Remove further masking as it is
unnecessary.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Its value is alway set to mr->romd_mode, so the removed comparisons are
fully superseded by "a->mr == b->mr".
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1458900629-2334-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The collision check does nothing and hasn't been used. Remove the
variable together with related code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1458900629-2334-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On the one hand, we have already qemu_get_ram_block() whose function
is similar. On the other hand, we can directly use mr->ram_block but
searching RAMblock by ram_addr which is a kind of waste.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1462845901-89716-2-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Memory accesses to code which has previously been translated into a TB show up
in the MMIO path, so that they may invalidate the TB. It's extremely confusing
to mix those in with device MMIOs, so split them into their own tracepoint.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1456949575-1633-2-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Knowing which CPU performed an action is essential for understanding SMP guest
behavior.
However, cpu_physical_memory_rw() may be executed by a machine init function,
before any VCPUs are running, when there is no CPU running ('current_cpu' is
NULL). In this case, store -1 in the trace record as the CPU index. Trace
analysis tools may need to be aware of this special case.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1456949575-1633-1-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The only caller now knows exactly which RAMBlock to free, so it's not
necessary to do the lookup.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-6-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All references to mr->ram_addr are replaced by
memory_region_get_ram_addr(mr) (except for a few assertions that are
replaced with mr->ram_block).
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-5-git-send-email-famz@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-4-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
