aboutsummaryrefslogtreecommitdiff
path: root/memory.c
AgeCommit message (Collapse)Author
2018-11-06memory: learn about non-volatile memory regionMarc-André Lureau
Add a new flag to mark memory region that are used as non-volatile, by NVDIMM for example. That bit is propagated down to the flat view, and reflected in HMP info mtree with a "nv-" prefix on the memory type. This way, guest_phys_blocks_region_add() can skip the NV memory regions for dumps and TCG memory clear in a following patch. Cc: dgilbert@redhat.com Cc: imammedo@redhat.com Cc: pbonzini@redhat.com Cc: guangrong.xiao@linux.intel.com Cc: mst@redhat.com Cc: xiaoguangrong.eric@gmail.com Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181003114454.5662-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19target-i386 : add coalesced_pio APIPeng Hao
the primary API realization. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1539795177-21038-3-git-send-email-peng.hao2@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02memory: Remove old_mmio accessorsPeter Maydell
Now that all the users of old_mmio MemoryRegion accessors have been converted, we can remove the core code support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180824170422.5783-2-peter.maydell@linaro.org> Based-on: <20180802174042.29234-1-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02memory: Fix access_with_adjusted_size(small size) on big-endian memory regionsPhilippe Mathieu-Daudé
Memory regions configured as DEVICE_BIG_ENDIAN (or DEVICE_NATIVE_ENDIAN on big-endian guest) behave incorrectly when the memory access 'size' is smaller than the implementation 'access_size'. In the following code segment from access_with_adjusted_size(): if (memory_region_big_endian(mr)) { for (i = 0; i < size; i += access_size) { r |= access_fn(mr, addr + i, value, access_size, (size - access_size - i) * 8, access_mask, attrs); } (size - access_size - i) * 8 is the number of bits that will arithmetic shift the current value. Currently we can only 'left' shift a read() access, and 'right' shift a write(). When the access 'size' is smaller than the implementation, we get a negative number of bits to shift. For the read() case, a negative 'left' shift is a 'right' shift :) However since the 'shift' type is unsigned, there is currently no way to right shift. Fix this by changing the access_fn() prototype to handle signed shift values, and modify the memory_region_shift_read|write_access() helpers to correctly arithmetic shift the opposite direction when the 'shift' value is negative. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180927002416.1781-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02memory: Refactor common shifting code from accessorsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180927002416.1781-3-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02memory: Use MAKE_64BIT_MASK()Philippe Mathieu-Daudé
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180927002416.1781-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02hostmem-file: make available memory-backend-file on POSIX-based hostsHikaru Nishida
Before this change, memory-backend-file object is valid for Linux hosts only because hostmem-file.c is compiled only on Linux hosts. However, other POSIX-based hosts (such as macOS) can support memory-backend-file object in the same way as on Linux hosts. This patch makes hostmem-file.c and related functions to be compiled on all POSIX-based hosts to make available memory-backend-file on them. Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com> Message-Id: <20180924123205.29651-1-hikarupsp@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02memory: cleanup side effects of memory_region_init_foo() on failureIgor Mammedov
if MemoryRegion intialization fails it's left in semi-initialized state, where it's size is not 0 and attached as child to owner object. And this leds to crash in following use-case: (monitor) object_add memory-backend-file,id=mem1,size=99999G,mem-path=/tmp/foo,discard-data=yes memory.c:2083: memory_region_get_ram_ptr: Assertion `mr->ram_block' failed Aborted (core dumped) it happens due to assumption that memory region is intialized when memory_region_size() != 0 and therefore it's ok to access it in file_backend_unparent() if (memory_region_size() != 0) memory_region_get_ram_ptr() which happens when object_add fails and unparents failed backend making file_backend_unparent() access invalid memory region. Fix it by making sure that memory_region_init_foo() APIs cleanup externally visible side effects on failure (like set size to 0 and unparenting object) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1536064777-42312-1-git-send-email-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-21Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc: fixes This includes nvdimm persistence fixes queued before the release. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 20 Aug 2018 11:38:11 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: migration/ram: ensure write persistence on loading all data to PMEM. migration/ram: Add check and info message to nvdimm post copy. mem/nvdimm: ensure write persistence to PMEM in label emulation hostmem-file: add the 'pmem' option configure: add libpmem support memory, exec: switch file ram allocation functions to 'flags' parameters memory, exec: Expose all memory block related flags. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20memory: Remove MMIO request_ptr APIsPeter Maydell
Remove the obsolete MMIO request_ptr APIs; they have no users now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Message-id: 20180817114619.22354-3-peter.maydell@linaro.org
2018-08-14accel/tcg: Pass read access type through to io_readx()Peter Maydell
The io_readx() function needs to know whether the load it is doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it can pass the right value to the cpu_transaction_failed() function. Plumb this information through from the softmmu code. This is currently not often going to give the wrong answer, because usually instruction fetches go via get_page_addr_code(). However once we switch over to handling execution from non-RAM by creating single-insn TBs, the path for an insn fetch to generate a bus error will be through cpu_ld*_code() and io_readx(), so without this change we will generate a d-side fault when we should generate an i-side fault. We also have to pass the access type via a CPU struct global down to unassigned_mem_read(), for the benefit of the targets which still use the cpu_unassigned_access() hook (m68k, mips, sparc, xtensa). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-2-peter.maydell@linaro.org
2018-08-10memory, exec: switch file ram allocation functions to 'flags' parametersJunyan He
As more flag parameters besides the existing 'share' are going to be added to following functions memory_region_init_ram_from_file qemu_ram_alloc_from_fd qemu_ram_alloc_from_file let's switch them to use the 'flags' parameters so as to ease future flag additions. The existing 'share' flag is converted to the RAM_SHARED bit in ram_flags, and other flag bits are ignored by above functions right now. Signed-off-by: Junyan He <junyan.he@intel.com> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-28memory/hmp: Print owners/parents in "info mtree"Alexey Kardashevskiy
This adds owners/parents (which are the same, just occasionally owner==NULL) printing for memory regions; a new '-o' flag enabled new output. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20180604032511.6980-1-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-15iommu: Add IOMMU index argument to translate methodPeter Maydell
Add an IOMMU index argument to the translate method of IOMMUs. Since all of our current IOMMU implementations support only a single IOMMU index, this has no effect on the behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-4-peter.maydell@linaro.org
2018-06-15iommu: Add IOMMU index argument to notifier APIsPeter Maydell
Add support for multiple IOMMU indexes to the IOMMU notifier APIs. When initializing a notifier with iommu_notifier_init(), the caller must pass the IOMMU index that it is interested in. When a change happens, the IOMMU implementation must pass memory_region_notify_iommu() the IOMMU index that has changed and that notifiers must be called for. IOMMUs which support only a single index don't need to change. Callers which only really support working with IOMMUs with a single index can use the result of passing MEMTXATTRS_UNSPECIFIED to memory_region_iommu_attrs_to_index(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-3-peter.maydell@linaro.org
2018-06-15iommu: Add IOMMU index concept to IOMMU APIPeter Maydell
If an IOMMU supports mappings that care about the memory transaction attributes, then it no longer has a unique address -> output mapping, but more than one. We can represent these using an IOMMU index, analogous to TCG's mmu indexes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-2-peter.maydell@linaro.org
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01memory: Make operations using MemoryRegionIoeventfd struct pass by pointer.Tristan Burgess
This changes the functions memory_region_ioeventfd_equal, memory_region_ioeventfd_before, and their callers, to pass the MemoryRegionIoeventfd struct via pointer, instead of directly passing the struct. This saves on stack space and is considered safe practice. Signed-off-by: Tristan Burgess <tburgessdev@gmail.com> Message-Id: <20180529030445.177867-1-tburgessdev@gmail.com> Fixes: Launchpad bug 1720969 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01memory: delete struct AddressSpaceOpsJay Zhou
Since struct AddressSpaceOps isn't used anywhere else, so just delete it. Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Message-Id: <1526384108-49348-1-git-send-email-jianjay.zhou@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31memory: Do not include "exec/ioport.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/ioport.h"' memory.c | \ cut -d: -f-1 | \ xargs egrep -Li "(portio|cpu_(in|out).\()" | \ xargs sed -i.bak '/#include "exec\/ioport.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-5-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31Make MemoryRegion valid.accepts callback take a MemTxAttrs argumentPeter Maydell
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org
2018-05-31Make memory_region_access_valid() take a MemTxAttrs argumentPeter Maydell
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to memory_region_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. The callsite in flatview_access_valid() is part of a recursive loop flatview_access_valid() -> memory_region_access_valid() -> subpage_accepts() -> flatview_access_valid(); we make it pass MEMTXATTRS_UNSPECIFIED for now, until the next several commits have plumbed an attrs parameter through the rest of the loop and we can add an attrs parameter to flatview_access_valid(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-8-peter.maydell@linaro.org
2018-05-09exec: reintroduce MemoryRegion cachingPaolo Bonzini
MemoryRegionCache was reverted to "normal" address_space_* operations for 2.9, due to lack of support for IOMMUs. Reinstate the optimizations, caching only the IOMMU translation at address_cache_init but not the IOMMU lookup and target AddressSpace translation are not cached; now that MemoryRegionCache supports IOMMUs, it becomes more widely applicable too. The inlined fast path is defined in memory_ldst_cached.inc.h, while the slow path uses memory_ldst.inc.c as before. The smaller fast path causes a little code size reduction in MemoryRegionCache users: hw/virtio/virtio.o text size before: 32373 hw/virtio/virtio.o text size after: 31941 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06memory: inline some performance-sensitive accessorsPaolo Bonzini
These accessors are called from inlined functions, and the call sequence is much more expensive than just inlining the access. Move the struct declaration to memory-internal.h so that exec.c and memory.c can both use an inline function. Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-19mem: add share parameter to memory-backend-ramMarcel Apfelbaum
Currently only file backed memory backend can be created with a "share" flag in order to allow sharing guest RAM with other processes in the host. Add the "share" flag also to RAM Memory Backend in order to allow remapping parts of the guest RAM to different host virtual addresses. This is needed by the RDMA devices in order to remap non-contiguous QEMU virtual addresses to a contiguous virtual address range. Moved the "share" flag to the Host Memory base class, modified phys_mem_alloc to include the new parameter and a new interface memory_region_init_ram_shared_nomigrate. There are no functional changes if the new flag is not used. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-13memory: unify loops to sync dirty log bitmapPaolo Bonzini
Now that memory_region_sync_dirty_bitmap is NULL, we can unify its loop with memory_global_dirty_log_sync's. The only difference is that memory_region_sync_dirty_bitmap will no longer call log_sync on FlatRanges that do have a zero dirty_log_mask, but this is okay because video memory is always registered with the dirty page logging mechanism. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13memory: hide memory_region_sync_dirty_bitmap behind DirtyBitmapSnapshotPaolo Bonzini
Simplify the users of memory_region_snapshot_and_clear_dirty, so that they do not have to call memory_region_sync_dirty_bitmap explicitly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13memory: remove memory_region_test_and_clear_dirtyPaolo Bonzini
It is unused after g364fb has been converted to use DirtyBitmapSnapshot. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* socket option parsing fix (Daniel) * SCSI fixes (Fam) * Readline double-free fix (Greg) * More HVF attribution fixes (Izik) * WHPX (Windows Hypervisor Platform Extensions) support (Justin) * POLLHUP handler (Klim) * ivshmem fixes (Ladi) * memfd memory backend (Marc-André) * improved error message (Marcelo) * Memory fixes (Peter Xu, Zhecheng) * Remove obsolete code and comments (Peter M.) * qdev API improvements (Philippe) * Add CONFIG_I2C switch (Thomas) # gpg: Signature made Wed 07 Feb 2018 15:24:08 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) Add the WHPX acceleration enlightenments Introduce the WHPX impl Add the WHPX vcpu API Add the Windows Hypervisor Platform accelerator. tests/test-filter-redirector: move close() tests: use memfd in vhost-user-test vhost-user-test: make read-guest-mem setup its own qemu tests: keep compiling failing vhost-user tests Add memfd based hostmem memfd: add hugetlbsize argument memfd: add hugetlb support memfd: add error argument, instead of perror() cpus: join thread when removing a vCPU cpus: hvf: unregister thread with RCU cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug cpus: dummy: unregister thread with RCU, exit loop on unplug cpus: kvm: unregister thread with RCU cpus: hax: register/unregister thread with RCU, exit loop on unplug ivshmem: Disable irqfd on device reset ivshmem: Improve MSI irqfd error handling ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # cpus.c
2018-02-07memory: do explicit cleanup when remove listenersPeter Xu
When unregister memory listeners, we should call, e.g., region_del() (and possibly other undo operations) on every existing memory region sections there, otherwise we may leak resources that are held during the region_add(). This patch undo the stuff for the listeners, which emulates the case when the address space is set from current to an empty state. I found this problem when debugging a refcount leak issue that leads to a device unplug event lost (please see the "Bug:" line below). In that case, the leakage of resource is the PCI BAR memory region refcount. And since memory regions are not keeping their own refcount but onto their owners, so the vfio-pci device's (who is the owner of the PCI BAR memory regions) refcount is leaked, and event missing. We had encountered similar issues before and fixed in other way (ee4c112846, "vhost: Release memory references on cleanup"). This patch can be seen as a more high-level fix of similar problems that are caused by the resource leaks from memory listeners. So now we can remove the explicit unref of memory regions since that'll be done altogether during unregistering of listeners now. Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1531393 Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180122060244.29368-5-peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-06memory/iommu: Add get_attr()Alexey Kardashevskiy
This adds get_attr() to IOMMUMemoryRegionClass, like iommu_ops::domain_get_attr in the Linux kernel. This defines the first attribute - IOMMU_ATTR_SPAPR_TCE_FD - which will be used between the pSeries machine and VFIO-PCI. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-02-05memory: set ioeventfd_update_pending after address_space_update_ioeventfdslinzhecheng
We should set ioeventfd_update_pending same as memory_region_update_pending. Signed-off-by: linzhecheng <linzc@zju.edu.cn> Message-Id: <1515934519-16158-1-git-send-email-linzc@zju.edu.cn> Cc: qemu-stable@nongnu.org Fixes: ade9c1aac5292ff698fa550adebe794c37d86cc9 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-19hostmem-file: add "align" optionHaozhong Zhang
When mmap(2) the backend files, QEMU uses the host page size (getpagesize(2)) by default as the alignment of mapping address. However, some backends may require alignments different than the page size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned, fails with a kernel message like [617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff) Because there is no common approach to get such alignment requirement, we add the 'align' option to 'memory-backend-file', so that users or management utils, which have enough knowledge about the backend, can specify a proper alignment via this option. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [ehabkost: fixed typo, fixed error_setg() format string] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-12-18memory: remove unused memory_region_set_global_locking()Marc-André Lureau
This was never used since its introduction in commit 196ea13104f8 ("memory: Add global-locking property to memory regions"). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-10-18memory: reuse section_from_flat_range()David Hildenbrand
We can use section_from_flat_range() instead of manually initializing. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171016144302.24284-8-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-18memory: call log_start after region_addDavid Hildenbrand
It might be confusing for some listener implementations that implement both, region_add and log_start (e.g. KVM) if we call log_start before an actual region was added using region_add. This makes current KVM code trigger an assertion ("kvm_section_update_flags: error finding slot"). So let's just reverse the order instead of tolerating log_start on yet unknown regions. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171016144302.24284-2-david@redhat.com> Tested-by: Joe Clifford <joeclifford@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-12memory: fix off-by-one error in memory_region_notify_one()Maxime Coquelin
This patch fixes an off-by-one error that could lead to the notifyee to receive notifications for ranges it is not registered to. The bug has been spotted by code review. Fixes: bd2bfa4c52e5 ("memory: introduce memory_region_notify_one()") Cc: qemu-stable@nongnu.org Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Message-Id: <20171010094247.10173-4-maxime.coquelin@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22memory: Share special empty FlatViewAlexey Kardashevskiy
This shares an cached empty FlatView among address spaces. The empty FV is used every time when a root MR renders into a FV without memory sections which happens when MR or its children are not enabled or zero-sized. The empty_view is not NULL to keep the rest of memory API intact; it also has a dispatch tree for the same reason. On POWER8 with 255 CPUs, 255 virtio-net, 40 PCI bridges guest this halves the amount of FlatView's in use (557 -> 260) and dispatch tables (~800000 -> ~370000). In an unrelated experiment with 112 non-virtio devices on x86 ("-M pc"), only 4 FlatViews are alive, and about ~2000 are created at startup. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-16-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22memory: seek FlatView sharing candidates among children subregionsPaolo Bonzini
A container can be used instead of an alias to allow switching between multiple subregions. In this case we cannot directly share the subregions (since they only belong to a single parent), but if the subregions are aliases we can in turn walk those. This is not enough to remove all source of quadratic FlatView creation, but it enables sharing of the PCI bus master FlatViews (and their AddressSpaceDispatch structures) across all PCI devices. For 112 virtio-net-pci devices, boot time is reduced from 25 to 10 seconds and memory consumption from 1.4 to 1 G. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22memory: trace FlatView creation and destructionPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22memory: Create FlatView directlyAlexey Kardashevskiy
This avoids usual memory_region_transaction_commit() which rebuilds all FVs. On POWER8 with 255 CPUs, 255 virtio-net, 40 PCI bridges guest this brings down the boot time from 25s to 20s and reduces the amount of temporary FVs allocated during machine constructon (~800000 -> ~640000) and amount of temporary dispatch trees (~370000 -> ~300000), the total memory footprint goes down (18G -> 17G). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-18-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22memory: Get rid of address_space_init_shareableAlexey Kardashevskiy
Since FlatViews are shared now and ASes not, this gets rid of address_space_init_shareable(). This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-17-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Rework "info mtree" to print flat views and dispatch treesAlexey Kardashevskiy
This adds a new "-d" switch to "info mtree" to print dispatch tree internals. This changes the way "-f" is handled - it prints now flat views and associated address spaces. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-15-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Do not allocate FlatView in address_space_initAlexey Kardashevskiy
This creates a new AS object without any FlatView as memory_region_transaction_commit() may want to reuse the empty FV. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-14-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Share FlatView's and dispatch trees between address spacesAlexey Kardashevskiy
This allows sharing flat views between address spaces (AS) when the same root memory region is used when creating a new address space. This is done by walking through all ASes and caching one FlatView per a physical root MR (i.e. not aliased). This removes search for duplicates from address_space_init_shareable() as FlatViews are shared elsewhere and keeping as::ref_count correct seems an unnecessary and useless complication. This should cause no change and memory use or boot time yet. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-13-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Move address_space_update_ioeventfdsAlexey Kardashevskiy
So it is called (twice) from the same function. This is to make the next patches a bit simpler. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-12-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Alloc dispatch tree where topology is generaredAlexey Kardashevskiy
This is to make next patches simpler. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-11-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Store physical root MR in FlatViewAlexey Kardashevskiy
Address spaces get to keep a root MR (alias or not) but FlatView stores the actual MR as this is going to be used later on to decide whether to share a particular FlatView or not. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-10-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Rename mem_begin/mem_commit/mem_add helpersAlexey Kardashevskiy
This renames some helpers to reflect better what they do. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-9-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Switch memory from using AddressSpace to FlatViewAlexey Kardashevskiy
FlatView's will be shared between AddressSpace's and subpage_t and MemoryRegionSection cannot store AS anymore, hence this change. In particular, for: typedef struct subpage_t { MemoryRegion iomem; - AddressSpace *as; + FlatView *fv; hwaddr base; uint16_t sub_section[]; } subpage_t; struct MemoryRegionSection { MemoryRegion *mr; - AddressSpace *address_space; + FlatView *fv; hwaddr offset_within_region; Int128 size; hwaddr offset_within_address_space; bool readonly; }; This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-7-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 06:13:44 +0000