aboutsummaryrefslogtreecommitdiff
path: root/linux-user
AgeCommit message (Collapse)Author
2020-08-23linux-user: Fix 'utimensat()' implementationFilip Bozuta
Implementation of syscall 'utimensat()' in 'syscall.c' uses functions target_to_host/host_to_target_timespec() to convert values of 'struct timespec' between host and target. However, the implementation doesn't check whether the conversion succeeds and thus can cause an inappropriate error or succeed unappropriately instead of setting errno EFAULT ('Bad address') which is supposed to be set in these cases. This was confirmed with the LTP test for utimensat ('testcases/utimensat') which fails for test cases when the errno EFAULT is expected. After changes from this patch, the test passes for all test cases. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811113101.6636-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Add support for a group of 2038 safe syscallsFilip Bozuta
This patch implements functionality for following time64 syscalls: *clock_getres_time64 This a year 2038 safe variant of syscall: int clock_getres(clockid_t clockid, struct timespec *res) --finding the resoultion of a specified clock-- man page: https://man7.org/linux/man-pages/man2/clock_getres.2.html *timer_gettime64 *timer_settime64 These are year 2038 safe variants of syscalls: int timer_settime(timer_t timerid, int flags, const struct itimerspec *new_value, struct itimerspec *old_value) int timer_gettime(timer_t timerid, struct itimerspec *curr_value) --arming/dissarming and fetching state of POSIX per-process timer-- man page: https://man7.org/linux/man-pages/man2/timer_settime.2.html *timerfd_gettime64 *timerfd_settime64 These are year 2038 safe variants of syscalls: int timerfd_settime(int fd, int flags, const struct itimerspec *new_value, struct itimerspec *old_value) int timerfd_gettime(int fd, struct itimerspec *curr_value) --timers that notify via file descriptor-- man page: https://man7.org/linux/man-pages/man2/timerfd_settime.2.html Implementation notes: Syscall 'clock_getres_time64' was implemented similarly to 'clock_getres()'. The only difference was that for the conversion of 'struct timespec' from host to target, function 'host_to_target_timespec64()' was used instead of 'host_to_target_timespec()'. For other syscalls, new functions 'host_to_target_itimerspec64()' and 'target_to_host_itimerspec64()' were added to convert the value of the 'struct itimerspec' from host to target and vice versa. A new type 'struct target__kernel_itimerspec' was added in 'syscall_defs.h'. This type was defined with fields which are of the already defined type 'struct target_timespec'. This new 'struct target__kernel_itimerspec' type is used in these new converting functions. These new functions were defined similarly to 'host_to_target_itimerspec()' and 'target_to_host_itimerspec()' the only difference being that 'target_to_host_timespec64()' and 'host_to_target_timespec64()' were used. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200722153421.295411-3-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Modify 'target_to_host/host_to_target_itimerspec()'Filip Bozuta
Functions 'target_to_host_itimerspec()' and 'host_to_target_itimerspec()' are used to convert values of type 'struct itimerspec' between target and host. This type has 'struct timespec' as its fields. That is the reason why this patch introduces a little modification to the converting functions to be implemented using already existing functions that convert 'struct timespec': 'target_to_host_timespec()' and 'host_to_target_timespec()'. This makes the code of 'target_to_host_itimerspec()' and 'host_to_target_itimerspec()' more clean and readable. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200722153421.295411-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Adjust guest page protection for the hostRichard Henderson
Executable guest pages are never directly executed by the host, but do need to be readable for translation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200519185645.3915-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Validate mmap/mprotect prot valueRichard Henderson
The kernel will return -EINVAL for bits set in the prot argument that are unknown or invalid. Previously we were simply cropping out the bits that we care about. Introduce validate_prot_to_pageflags to perform this check in a single place between the two syscalls. Differentiate between the target and host versions of prot. Compute the qemu internal page_flags value at the same time. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200519185645.3915-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Fix "print_fdset()" in "strace.c" to not print ", " after last valueFilip Bozuta
Function "print_fdset()" in "strace.c" is used to print the file descriptor values in "print__newselect()" which prints arguments of syscall _newselect(). Until changes from this patch, this function was printing "," even after the last value of the fd_set argument. This was changed in this patch by removing this unnecessary "," after the last fd value and thus improving the estetics of the _newselect() "-strace" print. Implementation notes: The printing fix was made possible by using an existing function "get_comma()" which returns a "," or an empty string "" based on its argument (0 for "," and other for ""). Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200702160915.9517-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: linux-userMarc-André Lureau
The most interesting or most complicated part here is the syscall_nr.h generators. In order to keep the generation logic all in meson.build, I am adding to config_target the name of the .tbl file, and making the generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl. For architectures where the input file is not named syscall_nr.tbl, syscall_nr.h has to be a source file; it's just a forwarder for x86 (i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27linux-user: Use getcwd syscall directlyAndreas Schwab
The glibc getcwd function returns different errors than the getcwd syscall, which triggers an assertion failure in the glibc getcwd function when running under the emulation. When the syscall returns ENAMETOOLONG, the glibc wrapper uses a fallback implementation that potentially handles an unlimited path length, and returns with ERANGE if the provided buffer is too small. The qemu emulation cannot distinguish the two cases, and thus always returns ERANGE. This is unexpected by the glibc wrapper. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmmu3qplvi.fsf@suse.de> [lv: updated description] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-27linux-user: Fix syscall rt_sigtimedwait() implementationFilip Bozuta
Implementation of 'rt_sigtimedwait()' in 'syscall.c' uses the function 'target_to_host_timespec()' to transfer the value of 'struct timespec' from target to host. However, the implementation doesn't check whether this conversion succeeds and thus can cause an unaproppriate error instead of the 'EFAULT (Bad address)' which is supposed to be set if the conversion from target to host fails. This was confirmed with the LTP test for rt_sigtimedwait: "/testcases/kernel/syscalls/rt_sigtimedwait/rt_sigtimedwait01.c" which causes an unapropriate error in test case "test_bad_adress3" which is run with a bad adress for the 'struct timespec' argument: FAIL: test_bad_address3 (349): Unexpected failure: EAGAIN/EWOULDBLOCK (11) The test fails with an unexptected errno 'EAGAIN/EWOULDBLOCK' instead of the expected EFAULT. After the changes from this patch, the test case is executed successfully along with the other LTP test cases for 'rt_sigtimedwait()': PASS: test_bad_address3 (349): Test passed Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200724181651.167819-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-27linux-user: Ensure mmap_min_addr is non-zeroRichard Henderson
When the chroot does not have /proc mounted, we can read neither /proc/sys/vm/mmap_min_addr nor /proc/sys/maps. The enforcement of mmap_min_addr in the host kernel is done by the security module, and so does not apply to processes owned by root. Which leads pgd_find_hole_fallback to succeed in probing a reservation at address 0. Which confuses pgb_reserved_va to believe that guest_base has not actually been initialized. We don't actually want NULL addresses to become accessible, so make sure that mmap_min_addr is initialized with a non-zero value. Buglink: https://bugs.launchpad.net/qemu/+bug/1888728 Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200724212314.545877-1-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-27linux-user, ppc: fix clock_nanosleep() for linux-user-ppcLaurent Vivier
Our safe_clock_nanosleep() returns -1 and updates errno. We don't need to update the CRF bit in syscall.c because it will be updated in ppc/cpu_loop.c as the return value is negative. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200722174612.2917566-3-laurent@vivier.eu> Message-Id: <20200724064509.331-14-alex.bennee@linaro.org>
2020-07-27linux-user: fix clock_nanosleep()Laurent Vivier
If the call is interrupted by a signal handler, it fails with error EINTR and if "remain" is not NULL and "flags" is not TIMER_ABSTIME, it returns the remaining unslept time in "remain". Update linux-user to not overwrite the "remain" structure if there is no error. Found with "make check-tcg", linux-test fails on nanosleep test: TEST linux-test on x86_64 .../tests/tcg/multiarch/linux-test.c:242: nanosleep Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200722174612.2917566-2-laurent@vivier.eu> Message-Id: <20200724064509.331-13-alex.bennee@linaro.org>
2020-07-27linux-user: don't use MAP_FIXED in pgd_find_hole_fallbackAlex Bennée
Plain MAP_FIXED has the undesirable behaviour of splatting exiting maps so we don't actually achieve what we want when looking for gaps. We should be using MAP_FIXED_NOREPLACE. As this isn't always available we need to potentially check the returned address to see if the kernel gave us what we asked for. Fixes: ad592e37dfc ("linux-user: provide fallback pgd_find_hole for bare chroots") Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200724064509.331-9-alex.bennee@linaro.org>
2020-07-14linux-user: fix print_syscall_err() when syscall returned value is negativeLaurent Vivier
print_syscall_err() relies on the sign of the returned value to know if it is an errno value or not. But in some cases the returned value can have the most signicant bit set without being an errno. This patch restores previous behaviour that was also checking if we can decode the errno to validate it. This patch fixes this kind of problem (qemu-m68k): root@sid:/# QEMU_STRACE= ls 3 brk(NULL) = -1 errno=21473607683 uname(0x407fff8a) = 0 to become: root@sid:/# QEMU_STRACE= ls 3 brk(NULL) = 0x8001e000 3 uname(0xffffdf8a) = 0 Fixes: c84be71f6854 ("linux-user: Extend strace support to enable argument printing after syscall execution") Cc: Filip.Bozuta@syrmia.com Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200708152435.706070-3-laurent@vivier.eu>
2020-07-14linux-user: fix the errno value in print_syscall_err()Laurent Vivier
errno of the target is returned as a negative value by the syscall, not in the host errno variable. The emulation of the target syscall can return an error while the host doesn't set an errno value. Target errnos and host errnos can also differ in some cases. Fixes: c84be71f6854 ("linux-user: Extend strace support to enable argument printing after syscall execution") Cc: Filip.Bozuta@syrmia.com Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Message-Id: <20200708152435.706070-2-laurent@vivier.eu>
2020-07-13linux-user: add netlink RTM_SETLINK commandLaurent Vivier
This command is needed to be able to boot systemd in a container. $ sudo systemd-nspawn -D /chroot/armhf/sid/ -b Spawning container sid on /chroot/armhf/sid. Press ^] three times within 1s to kill container. systemd 245.6-2 running in system mode. Detected virtualization systemd-nspawn. Detected architecture arm. Welcome to Debian GNU/Linux bullseye/sid! Set hostname to <virt-arm>. Failed to enqueue loopback interface start request: Operation not supported Caught <SEGV>, dumped core as pid 3. Exiting PID 1... Container sid failed with error code 255. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200709072332.890440-2-laurent@vivier.eu>
2020-07-13linux-user: add new netlink typesLaurent Vivier
Only implement IFLA_PERM_ADDRESS to fix the following error: Unknown host QEMU_IFLA type: 54 The couple of other ones, IFLA_PROP_LIST and IFLA_ALT_IFNAME, have been introduced to be used with RTM_NEWLINKPROP, RTM_DELLINKPROP and RTM_GETLINKPROP that are not implemented by QEMU. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200709072332.890440-1-laurent@vivier.eu>
2020-07-13linux-user: Fix Coverity CID 1430271 / CID 1430272Laurent Vivier
In new functions print_ioctl() and print_syscall_ret_ioctl(), we don't check if lock_user() returns NULL and this would cause a segfault in thunk_print(). If lock_user() returns NULL don't call thunk_print() but prints only the value of the (invalid) pointer. Tested with: # cat ioctl.c #include <unistd.h> #include <sys/ioctl.h> int main(void) { int ret; ret = ioctl(STDOUT_FILENO, TCGETS, 0xdeadbeef); ret = ioctl(STDOUT_FILENO, TCSETSF, 0xdeadbeef); return 0; } # QEMU_STRACE= ./ioctl ... 578 ioctl(1,TCGETS,0xdeadbeef) = -1 errno=2 (Bad address) 578 ioctl(1,TCSETSF,0xdeadbeef) = -1 errno=2 (Bad address) ... # QEMU_STRACE= passwd ... 623 ioctl(0,TCGETS,0x3fffed04) = 0 ({}) 623 ioctl(0,TCSETSF,{}) = 0 ... Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: 79482e5987c8 ("linux-user: Add strace support for printing arguments of ioctl()") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13linux-user: refactor ipc syscall and support of semtimedop syscallMatus Kysel
Refactoring ipc syscall for s390x and SPARC, so it matches glibc implementation We should add support of semtimedop syscall as new version of glibc 2.31 uses semop based on semtimedop (commit: https://gitlab.com/freedesktop-sdk/mirrors/sourceware/glibc/-/commit/765cdd0bffd77960ae852104fc4ea5edcdb8aed3 ). Signed-off-by: Matus Kysel <mkysel@tachyum.com> Message-Id: <20200626124612.58593-2-mkysel@tachyum.com> Message-Id: <20200626124612.58593-3-mkysel@tachyum.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> [lv: merged PATCH 1 & 2 to avoid build break on PATCH 1] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-13linux-user: Use EPROTONOSUPPORT for unimplemented netlink protocolsJosh Kunz
Linux uses the EPROTONOSUPPORT error code[1] if the users requests a netlink socket with an unsupported netlink protocol. This change switches linux-user to use the same code as Linux, instead of EPFNOSUPPORT (which AFAIK is just an anachronistic version of EAFNOSUPPORT). Tested by compiling all linux-user targets on x86. [1]: https://github.com/torvalds/linux/blob/bfe91da29bfad9941d5d703d45e29f0812a20724/net/netlink/af_netlink.c#L683 Signed-off-by: Josh Kunz <jkz@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200707001036.1671982-1-jkz@google.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-11linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_vaAlex Bennée
Given we assert the requested address matches what we asked we should also make that clear in the mmap flags. Otherwise we see failures in the GitLab environment for some currently unknown but allowable reason. We use MAP_FIXED_NOREPLACE if we can so we don't just clobber an existing mapping. Also include the strerror string for a bit more info on failure. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200701135652.1366-34-alex.bennee@linaro.org>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-04linux-user: Add strace support for printing arguments of ioctl()Filip Bozuta
This patch implements functionality for strace argument printing for ioctls. When running ioctls through qemu with "-strace", they get printed in format: "ioctl(fd_num,0x*,0x*) = ret_value" where the request code an the ioctl's third argument get printed in a hexadicemal format. This patch changes that by enabling strace to print both the request code name and the contents of the third argument. For example, when running ioctl RTC_SET_TIME with "-strace", with changes from this patch, it gets printed in this way: "ioctl(3,RTC_SET_TIME,{12,13,15,20,10,119,0,0,0}) = 0" In case of IOC_R type ioctls, the contents of the third argument get printed after the return value, and the argument inside the ioctl call gets printed as pointer in hexadecimal format. For example, when running RTC_RD_TIME with "-strace", with changes from this patch, it gets printed in this way: "ioctl(3,RTC_RD_TIME,0x40800374) = 0 ({22,9,13,11,5,120,0,0,0})" In case of IOC_RW type ioctls, the contents of the third argument get printed both inside the ioctl call and after the return value. Implementation notes: Functions "print_ioctl()" and "print_syscall_ret_ioctl()", that are defined in "strace.c", are listed in file "strace.list" as "call" and "result" value for ioctl. Structure definition "IOCTLEntry" as well as predefined values for IOC_R, IOC_W and IOC_RW were cut and pasted from file "syscall.c" to file "qemu.h" so that they can be used by these functions to print the contents of the third ioctl argument. Also, the "static" identifier for array "ioctl_entries[]" was removed and this array was declared as "extern" in "qemu.h" so that it can also be used by these functions. To decode the structure type of the ioctl third argument, function "thunk_print()" was defined in file "thunk.c" and its definition is somewhat simillar to that of function "thunk_convert()". Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619124727.18080-3-filip.bozuta@syrmia.com> [lv: fix close-bracket] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: Add thunk argument types for SIOCGSTAMP and SIOCGSTAMPNSFilip Bozuta
Socket ioctls SIOCGSTAMP and SIOCGSTAMPNS, used for timestamping the socket connection, are defined in file "ioctls.h" differently from other ioctls. The reason for this difference is explained in the comments above their definition. These ioctls didn't have defined thunk argument types before changes from this patch. They have special handling functions ("do_ioctl_SIOCGSTAMP" and "do_ioctl_SIOCGSTAMPNS") that take care of setting values for approppriate argument types (struct timeval and struct timespec) and thus no thunk argument types were needed for their implementation. But this patch adds those argument type definitions in file "syscall_types.h" and "ioctls.h" as it is needed for printing arguments of these ioctls with strace. Implementation notes: There are two variants of these ioctls: SIOCGSTAMP_OLD/SIOCGSTAM_NEW and SIOCGSTAMPNS_OLD/SIOCGSTAMPNS_NEW. One is the old existing definition and the other is the 2038 safe variant used for 32-bit architectures. Corresponding structure definitions STRUCT_timespec/STRUCT__kernel_timespec and STRUCT_timeval/STRUCT__kernel_sock_timeval were added for these variants. STRUCT_timeval definition was already inside the file as it is used by another implemented ioctl. Two cases were added for definitions STRUCT_timeval/STRUCT__kernel_sock_timeval to manage the case when the "u_sec" field of the timeval structure is of type int. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619124727.18080-2-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: Add strace support for printing arguments of fallocate()Filip Bozuta
This patch implements strace argument printing functionality for following syscall: *fallocate - manipulate file space int fallocate(int fd, int mode, off_t offset, off_t len) man page: https://www.man7.org/linux/man-pages/man2/fallocate.2.html Implementation notes: This syscall's second argument "mode" is composed of predefined values which represent flags that determine the type of operation that is to be performed on the file space. For that reason, a printing function "print_fallocate" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print flags of the "mode" argument. These flags are stated inside an array "falloc_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_GENERIC()". Most of these flags are defined after kernel version 3.0 which is why they are enwrapped in an #ifdef directive. The syscall's third ant fourth argument are of type "off_t" which can cause variations between 32/64-bit architectures. To handle this variation, function "target_offset64()" was copied from file "strace.c" and used in "print_fallocate" to print "off_t" arguments for 32-bit architectures. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-7-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: Add strace support for printing arguments of chown()/lchown()Filip Bozuta
This patch implements strace argument printing functionality for syscalls: *chown, lchown - change ownership of a file int chown(const char *pathname, uid_t owner, gid_t group) int lchown(const char *pathname, uid_t owner, gid_t group) man page: https://www.man7.org/linux/man-pages/man2/lchown.2.html Implementation notes: Both syscalls use strings as arguments and thus a separate printing function was stated in "strace.list" for them. Both syscalls share the same number and types of arguments and thus share a same definition in file "syscall.c". This defintion uses existing functions "print_string()" to print the string argument and "print_raw_param()" to print other two arguments that are of basic types. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-6-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: Add strace support for printing arguments of lseek()Filip Bozuta
This patch implements strace argument printing functionality for syscall: *lseek - reposition read/write file offset off_t lseek(int fd, off_t offset, int whence) man page: https://www.man7.org/linux/man-pages/man2/lseek.2.html Implementation notes: The syscall's third argument "whence" has predefined values: "SEEK_SET","SEEK_CUR","SEEK_END","SEEK_DATA","SEEK_HOLE" and thus a separate printing function "print_lseek" was stated in file "strace.list". This function is defined in "strace.c" by using an existing function "print_raw_param()" to print the first and second argument and a switch(case) statement for the predefined values of the third argument. Values "SEEK_DATA" and "SEEK_HOLE" are defined in kernel version 3.1. That is the reason why case statements for these values are enwrapped in #ifdef directive. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-5-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: Add strace support for printing argument of syscalls used for ↵Filip Bozuta
extended attributes This patch implements strace argument printing functionality for following syscalls: *getxattr, lgetxattr, fgetxattr - retrieve an extended attribute value ssize_t getxattr(const char *path, const char *name, void *value, size_t size) ssize_t lgetxattr(const char *path, const char *name, void *value, size_t size) ssize_t fgetxattr(int fd, const char *name, void *value, size_t size) man page: https://www.man7.org/linux/man-pages/man2/getxattr.2.html *listxattr, llistxattr, flistxattr - list extended attribute names ssize_t listxattr(const char *path, char *list, size_t size) ssize_t llistxattr(const char *path, char *list, size_t size) ssize_t flistxattr(int fd, char *list, size_t size) man page: https://www.man7.org/linux/man-pages/man2/listxattr.2.html *removexattr, lremovexattr, fremovexattr - remove an extended attribute int removexattr(const char *path, const char *name) int lremovexattr(const char *path, const char *name) int fremovexattr(int fd, const char *name) man page: https://www.man7.org/linux/man-pages/man2/removexattr.2.html Implementation notes: All of the syscalls have strings as argument types and thus a separate printing function was stated in file "strace.list" for every one of them. All of these printing functions were defined in "strace.c" using existing printing functions for appropriate argument types: "print_string()" - for (const char*) type "print_pointer()" - for (char*) and (void *) type "print_raw_param()" for (int) and (size_t) type Syscalls "getxattr()" and "lgetxattr()" have the same number and type of arguments and thus their print functions ("print_getxattr", "print_lgetxattr") share a same definition. The same statement applies to syscalls "listxattr()" and "llistxattr()". Function "print_syscall_ret_listxattr()" was added to print the returned list of extended attributes for syscalls "print_listxattr(), print_llistxattr() and print_flistxattr()". Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-4-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: Add strace support for a group of syscallsFilip Bozuta
This patch implements strace argument printing functionality for following syscalls: *acct - switch process accounting on or off int acct(const char *filename) man page: https://www.man7.org/linux/man-pages/man2/acct.2.html *fsync, fdatasync - synchronize a file's in-core state with storage device int fsync(int fd) int fdatasync(int fd) man page: https://www.man7.org/linux/man-pages/man2/fsync.2.html *listen - listen for connections on a socket int listen(int sockfd, int backlog) man page: https://www.man7.org/linux/man-pages/man2/listen.2.html Implementation notes: Syscall acct() takes string as its only argument and thus a separate print function "print_acct" is stated in file "strace.list". This function is defined and implemented in "strace.c" by using an existing function used to print string arguments: "print_string()". All the other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-3-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: Extend strace support to enable argument printing after syscall ↵Filip Bozuta
execution Structure "struct syscallname" in file "strace.c" is used for "-strace" to print arguments and return values of syscalls. The last field of this structure "result" represents the calling function that prints the return values. This field was extended in this patch so that this function takes all syscalls arguments beside the return value. In this way, it enables "-strace" to print arguments of syscalls that have changed after the syscall execution. This extension will be useful as there are many syscalls that return values inside their arguments (i.e. listxattr() that returns the list of extended attributes inside the "list" argument). Implementation notes: Since there are already three existing "print_syscall_ret*" functions inside "strace.c" ("print_syscall_ret_addr()", "print_syscall_ret_adjtimex()", "print_syscall_ret_newselect()"), they were changed to have all syscall arguments beside the return value. This was done so that these functions don't cause build errors (even though syscall arguments are not used in these functions). There is code repetition in these functions for checking the return value and printing the approppriate error message (this code is also located in print_syscall_ret() at the end of "strace.c"). That is the reason why a function "syscall_print_err()" was added for this code and put inside these functions. Functions "print_newselect()" and "print_syscall_ret_newselect()" were changed to use this new implemented functionality and not store the syscall argument values in separate static variables. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200619123331.17387-2-filip.bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user: syscall: ioctls: support DRM_IOCTL_VERSIONChen Gang
Another DRM_IOCTL_* commands will be done later. Signed-off-by: Chen Gang <chengang@emindsoft.com.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200605013221.22828-1-chengang@emindsoft.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-29linux-user/sparc64: Fix the handling of window spill trapGiuseppe Musacchio
Fix the handling of window spill traps by keeping cansave into account when calculating the new CWP. Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200625091204.3186186-3-laurent@vivier.eu>
2020-06-08linux-user: detect overflow of MAP_FIXED mmapAlex Bennée
Relaxing the restrictions on 64 bit guests leads to the user being able to attempt to map right at the edge of addressable memory. This in turn lead to address overflow tripping the assert in page_set_flags when the end address wrapped around. Detect the wrap earlier and correctly -ENOMEM the guest (in the reported case LTP mmap15). Fixes: 7d8cbbabcb Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200605154929.26910-15-alex.bennee@linaro.org>
2020-06-08linux-user: deal with address wrap for ARM_COMMPAGE on 32 bitAlex Bennée
We rely on the pointer to wrap when accessing the high address of the COMMPAGE so it lands somewhere reasonable. However on 32 bit hosts we cannot afford just to map the entire 4gb address range. The old mmap trial and error code handled this by just checking we could map both the guest_base and the computed COMMPAGE address. We can't just manipulate loadaddr to get what we want so we introduce an offset which pgb_find_hole can apply when looking for a gap for guest_base that ensures there is space left to map the COMMPAGE afterwards. This is arguably a little inefficient for the one 32 bit value (kuser_helper_version) we need to keep there given all the actual code entries are picked up during the translation phase. Fixes: ee94743034b Bug: https://bugs.launchpad.net/qemu/+bug/1880225 Cc: Bug 1880225 <1880225@bugs.launchpad.net> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200605154929.26910-13-alex.bennee@linaro.org>
2020-06-08linux-user: provide fallback pgd_find_hole for bare chrootsAlex Bennée
When running QEMU out of a chroot environment we may not have access to /proc/self/maps. As there is no other "official" way to introspect our memory map we need to fall back to the original technique of repeatedly trying to mmap an address range until we find one that works. Fortunately it's not quite as ugly as the original code given we already re-factored the complications of dealing with the ARM_COMMPAGE. We do make an attempt to skip over brk() which is about the only concrete piece of information we have about the address map at this moment. Fixes: ee9474303 Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200605154929.26910-12-alex.bennee@linaro.org>
2020-06-08Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging linux-user pull request 20200605-v2 Implement F_OFD_ fcntl() command, /proc/cpuinfo for hppa Fix socket(), prnctl() error codes, underflow in target_mremap, epoll_create() strace, oldumount for alpha User-mode build dependencies improvement # gpg: Signature made Sat 06 Jun 2020 14:15:36 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-5.1-pull-request: stubs: Restrict ui/win32-kbd-hook to system-mode hw/core: Restrict CpuClass::get_crash_info() to system-mode target/s390x: Restrict CpuClass::get_crash_info() to system-mode target/i386: Restrict CpuClass::get_crash_info() to system-mode arch_init: Remove unused 'qapi-commands-misc.h' include exec: Assert CPU migration is not used on user-only build target/riscv/cpu: Restrict CPU migration to system-mode stubs/Makefile: Reduce the user-mode object list util/Makefile: Reduce the user-mode object list tests/Makefile: Restrict some softmmu-only tests tests/Makefile: Only display TCG-related tests when TCG is available configure: Avoid building TCG when not needed Makefile: Only build virtiofsd if system-mode is enabled linux-user: implement OFD locks linux-user/mmap.c: fix integer underflow in target_mremap linux-user/strace.list: fix epoll_create{,1} -strace output linux-user: Add support for /proc/cpuinfo on hppa platform linux-user: return target error codes for socket() and prctl() linux-user, alpha: fix oldumount syscall Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05linux-user: implement OFD locksAndreas Schwab
Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvm7dx0cun3.fsf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05linux-user/mmap.c: fix integer underflow in target_mremapJonathan Marler
Fixes: https://bugs.launchpad.net/bugs/1876373 This code path in mmap occurs when a page size is decreased with mremap. When a section of pages is shrunk, qemu calls mmap_reserve on the pages that were released. However, it has the diff operation reversed, subtracting the larger old_size from the smaller new_size. Instead, it should be subtracting the smaller new_size from the larger old_size. You can also see in the previous line of the change that this mmap_reserve call only occurs when old_size > new_size. Bug: https://bugs.launchpad.net/qemu/+bug/1876373 Signed-off-by: Jonathan Marler <johnnymarler@gmail.com> Reviewded-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200502161225.14346-1-johnnymarler@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05linux-user/strace.list: fix epoll_create{,1} -strace outputSergei Trofimovich
Fix syscall name and parameters priinter. Before the change: ``` $ alpha-linux-user/qemu-alpha -strace -L /usr/alpha-unknown-linux-gnu/ /tmp/a ... 1274697 %s(%d)(2097152,274903156744,274903156760,274905840712,274877908880,274903235616) = 3 1274697 exit_group(0) ``` After the change: ``` $ alpha-linux-user/qemu-alpha -strace -L /usr/alpha-unknown-linux-gnu/ /tmp/a ... 1273719 epoll_create1(2097152) = 3 1273719 exit_group(0) ``` Fixes: 9cbc0578cb6 ("Improve output of various syscalls") Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> CC: Riku Voipio <riku.voipio@iki.fi> CC: Laurent Vivier <laurent@vivier.eu> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200416175957.1274882-1-slyfox@gentoo.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05linux-user: Add support for /proc/cpuinfo on hppa platformHelge Deller
Provide our own /proc/cpuinfo file for the hppa (parisc) platform. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200424210648.GA26715@ls3530.fritz.box> [lv: s/an/our/ and add TARGET_HPPA to guard is_proc()] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-29Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-tcg-plugins-270520-1' into staging Testing and one plugin fix: - support alternates for genisoimage to test/vm - add clang++ to clang tests - fix record/replay smoke test - enable more softfloat tests - better detection of hung gdb - upgrade aarch64 tcg test x-compile to gcc-10 - fix plugin cpu_index clash vs threads # gpg: Signature made Wed 27 May 2020 14:29:20 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-tcg-plugins-270520-1: tests/tcg: add new threadcount test linux-user: properly "unrealize" vCPU object cpus-common: ensure auto-assigned cpu_indexes don't clash tests/docker: use a gcc-10 based image for arm64 tests tests/docker: add debian11 base image tests/tcg: better detect confused gdb which can't connect tests/fp: split and audit the conversion tests tests/fp: enable extf80_le_quite tests tests/tcg: fix invocation of the memory record/replay tests travis.yml: Use clang++ in the Clang tests tests/vm: pass --genisoimage to basevm script configure: add alternate binary for genisoimage Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-28Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2020-05-28' into staging Fixes and improvements for the gitlab-CI: - Build with other images instead of the broken Debian containers - Fix building with the latest version of Clang (at least wrt. to the gitlab-CI pipeline) - Add Philippe, Alex and Wainer to the Gitlab-CI section in MAINTAINERS # gpg: Signature made Thu 28 May 2020 10:16:15 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-05-28: gitlab-ci: Determine the number of jobs dynamically gitlab-ci: Do not use the standard container images from gitlab gitlab-ci: Move edk2 and opensbi YAML files to .gitlab-ci.d folder GitLab CI: avoid calling before_scripts on unintended jobs gitlab-ci: Remove flex/bison packages MAINTAINERS: Add Philippe, Alex and Wainer to the Gitlab-CI section linux-user: limit check to HOST_LONG_BITS < TARGET_ABI_BITS Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-28linux-user: limit check to HOST_LONG_BITS < TARGET_ABI_BITSAlex Bennée
Newer clangs rightly spot that you can never exceed the full address space of 64 bit hosts with: linux-user/elfload.c:2076:41: error: result of comparison 'unsigned long' > 18446744073709551615 is always false [-Werror,-Wtautological-type-limit-compare] 4685 if ((guest_hiaddr - guest_base) > ~(uintptr_t)0) { 4686 ~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~ 4687 1 error generated. So lets limit the check to 32 bit hosts only. Fixes: ee94743034bf Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200525131823.715-8-thuth@redhat.com> [thuth: Use HOST_LONG_BITS < TARGET_ABI_BITS instead of HOST_LONG_BITS == 32] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-05-27linux-user: return target error codes for socket() and prctl()Helge Deller
Return target error codes instead of host error codes. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200424220033.GA28140@ls3530.fritz.box> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-27linux-user, alpha: fix oldumount syscallLaurent Vivier
When we try to bootstrap debian/lenny for alpha, it fails because it cannot umount /.root directory: ... Setting up initscripts (2.86.ds1-61) ... umount: /.root: Function not implemented dpkg: error processing initscripts (--configure): subprocess post-installation script returned error exit status 1 dpkg: sysvinit: dependency problems, but configuring anyway as you request: sysvinit depends on initscripts; however: Package initscripts is not configured yet. This is because, when we switched from syscall_nr.h to syscall.tbl, the syscall #321 has been renamed from umount to oldumount and syscall.c has not been updated to manage the new name. oldumount has been introduced in linux 2.1.116pre1 by: 7d32756b2 ("Import 2.1.116pre1") ... * We now support a flag for forced unmount like the other 'big iron' * unixes. Our API is identical to OSF/1 to avoid making a mess of AMD ... Fixes: 6116aea994 ("linux-user, alpha: add syscall table generation support") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200502194642.32823-1-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-27linux-user: properly "unrealize" vCPU objectAlex Bennée
We shouldn't be messing around with the CPU list in linux-user save for the very special case of do_fork(). When threads end we need to properly follow QOM object lifetime handling and allow the eventual cpu_common_unrealizefn to both remove the CPU and ensure any clean-up actions are taken place, for example calling plugin exit hooks. There is still a race condition to avoid so use the linux-user specific clone_lock instead of the cpu_list_lock to avoid it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Nikolay Igotti <igotti@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Message-Id: <20200520140541.30256-14-alex.bennee@linaro.org>
2020-05-27target/ppc: Add support for scv and rfscv instructionsNicholas Piggin
POWER9 adds scv and rfscv instructions and the system call vectored interrupt. Linux does not support this instruction yet but it has been tested with a modified kernel that runs on real hardware. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200507115328.789175-1-npiggin@gmail.com> [dwg: Corrected an overlong line] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-21linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32Peter Maydell
The Arm signal-handling code has some parts ifdeffed with a TARGET_CONFIG_CPU_32, which is always defined. This is a leftover from when this code's structure was based on the Linux kernel signal handling code, where it was intended to support 26-bit Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit 4da8b8208eded0ba21e3 in 2009. QEMU has never had 26-bit CPU support and is unlikely to ever add it; we certainly aren't going to support 26-bit Linux binaries via linux-user mode. The ifdef is just unhelpful noise, so remove it entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518143014.20689-1-peter.maydell@linaro.org
2020-05-21linux-user/arm: Reset CPSR_E when entering a signal handlerAmanieu d'Antras
This fixes signal handlers running with the wrong endianness if the interrupted code used SETEND to dynamically switch endianness. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200511131117.2486486-1-amanieu@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 06:37:50 +0000