| Age | Commit message (Collapse) | Author |
|---|
|
All elf64_note structure members are Elf64_Word (which is 32bit value)
hence using bswaptls to byteswap it on 64bit platforms is incorrect.
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
Rename ELF coredump types to avoid conflict with the corresponding host types.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
|
|
Re-implement GUEST_BASE support.
Offset guest ddress space by default if the guest binary contains
regions below the host mmap_min_addr.
Implement support for i386, x86-64 and arm hosts.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
Add explicit padding to MIPS signal frame structures.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Implement MIPS ll/sc instructions using atomic compare+exchange.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
The clone syscall takes 6 args.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Fixes getrlimit implementation that overwrote the result of the syscall
instead of converting it
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
makes socketcall 64-bit clean so it works on 64-bit big-endian systems
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
pipedes is an address, it should not be signed (breaks for addresses
> 0x80000000)
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
in this function
Removes the following warning
CC i386-linux-user/syscall.o
cc1: warnings being treated as errors
/media/nfs/qemu/linux-user/syscall.c: In function ‘do_syscall’:
/media/nfs/qemu/linux-user/syscall.c:2219: warning: ‘array’ may be used uninitialized in this function
Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
This patch is fixing following issues :
- commit 8fea36025b9d6d360ff3b78f88a84ccf221807e8 was applied to
do_getsockname instead of do_accept.
- Some syscalls were not checking properly the memory addresses passed
as argument
- Add check before syscalls made for cases like do_getpeername() where
we're using the address parameter after doing the syscall
- Fix do_accept to return EINVAL instead of EFAULT when parameters
invalid to match with linux behaviour
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
There's a error When doing something like that :
find / -type f -print0 | xargs -0 echo
[ done in a arm chroot with qemu-arm and linux binfmt stuff or with
find / -type f -print0 | qemu-arm -L <path> <path>/usr/bin/xargs -0
echo ]
Doing this outsite qemu is fine. The problem was the huge number of
parameters. Increasing MAX_ARG_PAGES is fixing that.
While I was at it, I've modified linux-user/main.c to report error code
of loader_exec. It helps to debug/know what's wrong.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Fix missing strnlen (a GNU extension) problems by using qemu_strnlen
used for user emulators also for system emulators.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Microblaze recently changed their ABI. The new is not backwards compatible
and there doesn't seem to be a way to distinguish old/new binaries.
Let's support the latest ABI for now and hope someone figures out a way to
hande both ABI's later.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
On Tue, Jun 16, 2009 at 08:19:23PM -0500, Anthony Liguori wrote:
> malc wrote:
>>
>> On my system the above line causes gcc to emit:
>>
>> In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:
>> /usr/include/linux/futex.h:48: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:48: error: syntax error before '*' token
>> /usr/include/linux/futex.h:63: error: field `list' has incomplete type
>> /usr/include/linux/futex.h:83: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:83: error: syntax error before '*' token
>> make[1]: *** [strace.o] Error 1
> We had the same problem with usb-linux.c. It's broken system headers,
> the __user stuff is supposed to get removed as part of the headers
> installation.
> It builds fine on my system (Fedora 10).
Howabout something like this:
commit eb8387cb0eda32a18880664eb5f0ca5c8bf05b45
Author: Riku Voipio <riku.voipio@iki.fi>
Date: Thu Jun 18 22:44:31 2009 +0300
Subject: linux-user: include futex defines directly
Since some common distributions have broken linux/futex.h, stop
including it. Instead add the defines directly.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
This issue has been detected with tests/linux-tests.c:
linux-test.c:330: getsockopt
327 len = sizeof(val);
328 chk_error(getsockopt(server_fd, SOL_SOCKET, SO_TYPE, &val, &len));
329 if (val != SOCK_STREAM)
330 error("getsockopt");
In linux-user/syscall.c:do_getsockopt(), we have:
...
val = tswap32(val);
...
if (put_user_u32(val, optval_addr))
...
whereas "put_user_u32" calls in the end "__put_user" which uses "tswap32".
So the "val = tswap32(val);" is useless and wrong.
This patch removes it.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Needed to make sure the xxxat() functions are available.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
We initialize mmap_mutex in any child threads/processes, but we need to
correctly statically initialize it for the original process.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Hi,
This is a new try to fix the fcntl support in linux-user. I tried to
adress all comments but as the previous version is several weeks old,
it's possible that I've missed some.
This patch doesn't handle linux specific fcntl flags. My plan is to get
this version of the patch reviewed/fixed and then, add them if wanted.
Thanks,
Arnaud
Signed-off-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Add support for tee, splice and vmsplice.
Originally from: vibi sreenivasan <vibi_sreenivasan@cms.com>
Riku: squashed patches together, added a test to configure
and removed compliler warning by picking up correct type for
splice param
Signed-off-by: vibisreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
implement pipe2 syscall.
[v2] fix do_pipe on mips and sh4
[v3] use pipe2 to ensure atomicity, but only when it is available.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
In preparation for supporting pipe2()
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Implemented the same way as in the kernel.
From: Martin Mohring <martin.mohring@opensuse.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
defines FIGETBSZ FIBMAP, allowing the respective ioctl's to
be implemented.
From: Martin Mohring <martin.mohring@opensuse.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
to setsockopt
linux-user: Added IP_(UN)BLOCK_SOURCE/IP_(ADD|DROP)_SOURCE_MEMBERSHIP flags to setsockopt
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
linux-user: Added IP_ADD_MEMBERSHIP/IP_DROP_MEMBERSHIP flags to setsockopt
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
In current code, we're sending ENOSYS to target when a syscall for the
xattrs is done. This makes applications like ls complain loudly about
that and breaks scripts parsing the output. Moreover, iirc, implemented
features of filesystems are are sending EOPNOTSUPP (I've not checked so
I may be a little bit wrong on that...).
So, I'm proposing to return -EOPNOTSUPP and make ls happy
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
When converting the termios structure between host and target in
target_to_host_termios and host_to_target_termios, the c_cc[] array is
never initialised.
Calling memset() before using it allows to run successfully "stty echo /
stty -echo" on arm-linux-user target (host being x86 and mips).
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
The glibc function for utimensat glibc returns -EINVAL when the path is null
which is a different behaviour with the syscall.
path can be null because internally the glibc is using utimensat with
path null when implmenting futimens. If path is null, call futimes
instead.
don't try to copy timespec from user if is NULL.
Add configure check for older systems
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
- to not to break strace with GUEST_BASE is set:
- Strace now can load and print guest strings correctly.
- Added printing support for commonly used flags in some syscalls
(e.g open, creat, mmap etc.)
v2:
- fix strace.c build on etch
- add futex print to strace
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
When target process is killed with signal (such signal that
should dump core) a coredump file is created. This file is
similar than coredump generated by Linux (there are few exceptions
though).
Riku Voipio: added support for rlimit
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
No regressions were observed on either 64bit or 32bit
IA hosts.
Patch based on original patches by:
Kirill A. Shutemov <kirill@shutemov.name>
- Implement shm* syscalls
- Fix and cleanup IPCOP_shm* ipc calls handling
Depends on "export mmap_find_vma for shmat" patch.
Various whitespace uglifications applied to minimize
patch size.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
|
|
When debugging multi-threaded programs, QEMU's gdb stub would report the
correct number of threads (the qfThreadInfo and qsThreadInfo packets).
However, the stub was unable to actually switch between threads (the T
packet), since it would report every thread except the first as being
dead. Furthermore, the stub relied upon cpu_index as a reliable means
of assigning IDs to the threads. This was a bad idea; if you have this
sequence of events:
initial thread created
new thread #1
new thread #2
thread #1 exits
new thread #3
thread #3 will have the same cpu_index as thread #1, which would confuse
GDB. (This problem is partly due to the remote protocol not having a
good way to send thread creation/destruction events.)
We fix this by using the host thread ID for the identifier passed to GDB
when debugging a multi-threaded userspace program. The thread ID might
wrap, but the same sort of problems with wrapping thread IDs would come
up with debugging programs natively, so this doesn't represent a
problem.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
Implement setup_{,rt_}frame and do_{,rt_}sigreturn for PPC 32-bit. Use
the same TARGET_QEMU_ESIGRETURN hack as for MIPS to avoid clobbering
register state on a sigreturn.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
