aboutsummaryrefslogtreecommitdiff
path: root/linux-user
AgeCommit message (Collapse)Author
2013-09-10linux-user: Add AArch64 supportAlexander Graf
This patch adds support for AArch64 in all the small corners of linux-user (primarily in image loading and startup code). Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-22-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-11-git-send-email-john.rigby@linaro.org [PMM: * removed some unnecessary #defines from syscall.h * catch attempts to use a 32 bit only cpu with aarch64-linux-user * termios stuff moved into its own patch * we specify our minimum uname version here now ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10linux-user: Allow targets to specify a minimum uname releasePeter Maydell
For newer target architectures, glibc can be picky about the kernel version: for example, it will not run on an aarch64 system unless the kernel reports itself as at least 3.8.0. Accommodate this by enhancing the existing support for faking the kernel version so that each target can optionally specify a minimum version: if the user doesn't force a specific fake version then we will override with the minimum required version only if the real host kernel version is insufficient. Use this facility to let aarch64 report a minimum of 3.8.0. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
2013-09-10linux-user: Add AArch64 termbits.h definitionsAlexander Graf
Add the AArch64 termbits.h with all the target's termios related constants and structures. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-20-git-send-email-peter.maydell@linaro.org [PMM: split out from another patch] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64Alexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-19-git-send-email-peter.maydell@linaro.org [PMM: pulled out from another patch; don't use is_a64() here; moved to linux-user from target-arm] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10linux-user: Make sure NWFPE code is 32 bit ARM onlyPeter Maydell
On ARM, linux-user emulation includes NWFPE support for emulating the ancient FPA floating point coprocessor. This has long since been superseded by VFP and is only required for legacy binaries. The AArch64 linux-user target doesn't compile in NWFPE support, so make sure the relevant code is protected by suitable ifdefs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-18-git-send-email-peter.maydell@linaro.org
2013-09-10linux-user: Add signal handling for AArch64Andreas Schwab
This patch adds signal handling for AArch64. The code is based on the respective source in the Linux kernel. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-17-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-10-git-send-email-john.rigby@linaro.org [PMM: fixed style nits: tabs, long lines; pulled target_signal.h in from a later patch; it fits better here] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10linux-user: Fix up AArch64 syscall handlersAlexander Graf
Some syscall handlers have special code for ARM enabled that we don't need on AArch64. Exclude AArch64 in those cases. In other places we can share struct definitions with other targets or have to provide our own. With this patch applied, most syscall definitions in linux-user should be sound for AArch64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-16-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-9-git-send-email-john.rigby@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10linux-user: Add syscall number definitions for AArch64Alexander Graf
The AArch64 syscall definitions are all publicly available in the Linux kernel. Let's add them to our linux-user emulation target, so that we can easily handle AArch64 syscalls. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-15-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-8-git-send-email-john.rigby@linaro.org [PMM: changes relating to cpu_loop() removed as they are superseded by an earlier patch] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10linux-user: Add cpu loop for AArch64Peter Maydell
Add the main linux-user cpu loop for AArch64. Since AArch64 has a different system call interface, doesn't need to worry about FPA emulation and may in the future keep the prefetch/data abort information in different system registers, it's simplest just to use a completely separate loop from the 32 bit ARM target, rather than peppering it with ifdefs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-14-git-send-email-peter.maydell@linaro.org
2013-09-10linux-user: Don't treat AArch64 cpu names speciallyAlexander Graf
32-bit ARM has a lot of different names for different types of CPUs it supports. On AArch64, we don't have this, so we really don't want to execute the 32-bit logic. Stub it out for AArch64 linux-user guests. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-13-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-7-git-send-email-john.rigby@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-03cpu: Use QTAILQ for CPU listAndreas Färber
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand macros. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29linux-user: Return success from m68k set_thread_area syscallPeter Maydell
The m68k set_thread_area syscall implementation failed to set the return value. Correctly set it zero, since this syscall will always succeed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1375093909-13653-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29linux-user/signal.c: Avoid using uninitialized data in ARM sigreturnPeter Maydell
Rephrase code used in ARM sigreturn functions to avoid using uninitialized variables. This fixes one genuine problem ('frame' would not be initialized if we took the error-exit path because our stackpointer was misaligned) and one which is clang being alarmist (frame_addr wouldn't be initialized, though this is harmless since unlock_user_struct ignores its second argument in these cases; however since we don't generally make use of this not-really-documented effect it's better avoided). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1375095632-13735-3-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29linux-user/signal.c: PPC: Silence clang uninitialized-use warningPeter Maydell
Silence a clang warning in a PPC signal return function: /home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/signal.c:4611:9: error: variable 'sr_addr' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!lock_user_struct(VERIFY_READ, sc, sc_addr, 1)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/signal.c:4636:28: note: uninitialized use occurs here unlock_user_struct(sr, sr_addr, 1); ^~~~~~~ /home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/qemu.h:442:27: note: expanded from macro 'unlock_user_struct' unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0) ^ This happens when we unlock a user struct which we never attempted to lock. Strictly, clang is actually wrong here -- it hasn't been able to spot that unlock_user_struct() doesn't use its second argument if the first is NULL. However it doesn't seem too unreasonable to demand that we pass in initialized values to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1375095632-13735-2-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29linux-user: correct argument number for sys_mremap and sys_splicePetar Jovanovic
sys_mremap missed 5th argument (new_address), which caused examples that remap to a specific address to fail. sys_splice missed 5th and 6th argument which caused different examples to fail. This change has an effect on MIPS target only. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-26linux-user: Avoid redundant ENV_GET_CPU()Andreas Färber
This fixes a mismerge in 874ec3c5b3821bb964f9f37b2f930f2a9ce51652. Acked-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-25Merge remote-tracking branch 'riku/linux-user-for-upstream' into stagingAnthony Liguori
* riku/linux-user-for-upstream: (21 commits) linux-user: Handle compressed ISA encodings when processing MIPS exceptions linux-user: Unlock mmap_lock when resuming guest from page_unprotect linux-user: Reset copied CPUs in cpu_copy() always linux-user: Fix epoll on ARM hosts linux-user: fix segmentation fault passing with h2g(x) != x linux-user: Fix pipe syscall return for SPARC linux-user: Fix target_stat and target_stat64 for OpenRISC linux-user: Avoid conditional cpu_reset() configure: Make NPTL non-optional linux-user: Enable NPTL for x86-64 linux-user: Add i386 TLS setter linux-user: Clean up handling of clone() argument order linux-user: Add missing 'break' in i386 get_thread_area syscall linux-user: Enable NPTL for m68k linux-user: Enable NPTL for SPARC targets linux-user: Enable NPTL for OpenRISC linux-user: Move includes of target-specific headers to end of qemu.h configure: Enable threading for unicore32-linux-user configure: Enable threading on all ppc and mips linux-user targets configure: Don't say target_nptl="no" if there is no linux-user target ... Conflicts: linux-user/main.c Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23linux-user: Handle compressed ISA encodings when processing MIPS exceptionsKwok Cheung Yeung
Decode trap instructions during the handling of an EXCP_BREAK or EXCP_TRAP according to the current ISA mode. Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Reset copied CPUs in cpu_copy() alwaysAlexander Graf
When a new thread gets created, we need to reset non arch specific state to get the new CPU into clean state. However this reset should happen before the arch specific CPU contents get copied over. Otherwise we end up having clean reset state in our newly created thread. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Fix epoll on ARM hostsAlexander Graf
The epoll emulation uses data structures without packing them, so the compiler might choose to add padding inside. This patch makes the most offending one (target_epoll_event) a packed structure to make sure we don't pad it by accident. ARM would pad it, so declare the padding mandatory for ARM targets. This fixes i386-on-ARM epoll emulation for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Fix pipe syscall return for SPARCPeter Maydell
SPARC is one of the CPUs which has a funny syscall ABI for the pipe syscall; add it to the set of special cases in do_pipe(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Fix target_stat and target_stat64 for OpenRISCPeter Maydell
OpenRISC uses the asm-generic versions of target_stat and target_stat64, but it was incorrectly using the x86/ARM/etc version due to a misplaced defined(TARGET_OPENRISC). The previously unused OpenRISC section of the ifdef ladder also defined an incorrect target_stat and omitted the target_stat64 definition. Fix target_stat, provide target_stat64, and add a comment noting that these are the asm-generic versions for the benefit of future ports. Reviewed-by: Jia Liu <proljc@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Use X86CPU property to retrieve CPUID familyAndreas Färber
Avoids duplicating the calculation. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23gdbstub: Change gdb_handlesig() argument to CPUStateAndreas Färber
Prepares for changing GDBState::c_cpu to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-22linux-user: Avoid conditional cpu_reset()Andreas Färber
Some CPUs reset as part of cpu_init(), some others were reset afterwards, some not at all. While some targets didn't implement a cpu_[state_]reset() function, QOM cpu_reset() is always available. There's nothing wrong with resetting twice on startup, so drop the #ifdef. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Make NPTL non-optionalPeter Maydell
Now all linux-user targets support building with NPTL, we can make it mandatory. This is a good idea because: * NPTL is no longer new and experimental; it is completely standard * in practice, linux-user without NPTL is nearly useless for binaries built against non-ancient glibc * it allows us to delete the rather untested code for handling the non-NPTL configuration Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the bsd-user codebase alone. This makes no change for bsd-user, since our configure test for NPTL had a "#include <linux/futex.h>" which means bsd-user would never have been compiled with CONFIG_USE_NPTL defined, and it still is not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for x86-64Peter Maydell
Add x86-64 implementation of cpu_set_tls() (like the kernel, we just have to call do_arch_prctl() to set FS); this allows us to enable NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add i386 TLS setterAlexander Graf
We can easily set the TLS on i386. Add code to do so. Signed-off-by: Alexander Graf <agraf@suse.de> [PMM: also remove "target_nptl=no" line from configure, for consistency with other patches in this series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Clean up handling of clone() argument orderPeter Maydell
Linux manages to have three separate orderings of the arguments to the clone() syscall on different architectures. In the kernel these are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2. Clean up our implementation of this to use similar #define names rather than a TARGET_* ifdef ladder. This includes behaviour changes fixing bugs on cris, x86-64, m68k, openrisc and unicore32. cris had explicit but wrong handling; the others were just incorrectly using QEMU's default, which happened to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears to be broken in the mainline kernel in that it tries to use arg3 for both parent_tidptr and newtls simultaneously -- we don't attempt to emulate this bug...) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add missing 'break' in i386 get_thread_area syscallPeter Maydell
The i386 code for the get_thread_area syscall was missing a 'break' which meant it would have fallen through into the implementation of the following syscall; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for m68kPeter Maydell
For m68k, per-thread data is a purely kernel construct with no CPU level support. Implement it via a field in the TaskState structure, used by cpu_set_tls() and the set_thread_area/get_thread_area syscalls. This allows us to enable compilation with NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for SPARC targetsPeter Maydell
Provide the missing cpu_set_tls(), and resolve the FIXME in cpu_clone_regs() by clearing the carry flag for the child. This allows us to turn on building with NPTL for SPARC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for OpenRISCPeter Maydell
The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread() implementation, so a cpu_set_tls() implementation is a no-op. cpu_clone_regs() was setting the syscall return value in the wrong register -- it is gpr[11], not gpr[2]. With these two things fixed, we can compile with NPTL enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Jia Liu <proljc@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Move includes of target-specific headers to end of qemu.hPeter Maydell
The target-specific headers (target_cpu.h and target_signal.h) might need to use the target-independent structure and function definitions of qemu.h; so include them only at the bottom of qemu.h, not the top. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-19linux-user: declare sys_futex to have 6 argumentsPetar Jovanovic
sys_futex has 6 arguments, and all of these need to be copied. Fix incorrect declaration in the mips_syscall_args array. This change fixes the cases where the 5th and 6th arguments have non-zero value and have importance. An example is a Linux implementation of pthread_cond_wait() function. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-10Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into stagingAnthony Liguori
QOM CPUState refactorings * Fix for OpenRISCCPU subclasses * Fix for gdbstub CPU selection * Move linux-user CPU functions into new header * CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al. * Fix some targets to consistently inline TCG code generation * Centrally log CPU reset # gpg: Signature made Wed 10 Jul 2013 07:52:39 AM CDT using RSA key ID 3E7E013F # gpg: Can't check signature: public key not found # By Andreas Färber (41) and others # Via Andreas Färber * afaerber/tags/qom-cpu-for-anthony: (43 commits) cpu: Move reset logging to CPUState target-ppc: Change LOG_MMU_STATE() argument to CPUState target-i386: Change LOG_PCALL_STATE() argument to CPUState log: Change log_cpu_state[_mask]() argument to CPUState target-i386: Change do_smm_enter() argument to X86CPU target-i386: Change do_interrupt_all() argument to X86CPU target-xtensa: Change gen_intermediate_code_internal() arg to XtensaCPU target-unicore32: Change gen_intermediate_code_internal() signature target-sparc: Change gen_intermediate_code_internal() argument to SPARCCPU target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPU target-s390x: Change gen_intermediate_code_internal() argument to S390CPU target-ppc: Change gen_intermediate_code_internal() argument to PowerPCCPU target-mips: Change gen_intermediate_code_internal() argument to MIPSCPU target-microblaze: Change gen_intermediate_code_internal() argument types target-m68k: Change gen_intermediate_code_internal() argument to M68kCPU target-lm32: Change gen_intermediate_code_internal() argument to LM32CPU target-i386: Change gen_intermediate_code_internal() argument to X86CPU target-cris: Change gen_intermediate_code_internal() argument to CRISCPU target-arm: Change gen_intermediate_code_internal() argument to ARMCPU target-alpha: Change gen_intermediate_code_internal() argument to AlphaCPU ...
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Change thread_env to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Clean up do_syscall() Coding Style for TARGET_NR_exitAndreas Färber
In particular fix 6-/10-char indentation. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-05linux-user: Do not ignore mmap failure from hostJürg Billeter
File mapping may fail with EACCES. Signed-off-by: Jürg Billeter <j@bitron.ch> Message-id: 1372498892-23676-1-git-send-email-j@bitron.ch Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05linux-user: improve target_to_host_sock_type conversionPetar Jovanovic
Previous implementation has failed to take into account different value of SOCK_NONBLOCK on target and host, and existence of SOCK_CLOEXEC. The same conversion has to be applied both for do_socket and do_socketpair, so the code has been isolated in a static inline function. enum sock_type in linux-user/socket.h has been extended to include TARGET_SOCK_CLOEXEC and TARGET_SOCK_NONBLOCK, similar to definition in libc. The patch also includes necessary code style changes (tab to spaces) in the header file since most of the file has been touched by this change. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Message-id: 1372639454-7560-1-git-send-email-petar.jovanovic@rt-rk.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05linux-user: Fix sys_utimensat (would not compile on old glibc)Peter Maydell
Commit c0d472b12e accidentally dropped the definition of __NR_SYS_utimensat even though its use is guarded by CONFIG_UTIMENSAT, not CONFIG_ATFILE. Some older glibc don't have utimensat() (even if they have the other *at() functions). Fix this by correctly cleaning up the sys_utimensat() implementation and #defines, so that we always provide the syscall if needed whether we're doing it via glibc or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 1371743841-26110-1-git-send-email-peter.maydell@linaro.org
2013-07-05linux-user: fix signal number range checkAndreas Schwab
When translating between host and target signal numbers keep negative numbers unchanged, avoiding access beyond array bounds. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 878v2b8sek.fsf@igel.home
2013-07-05linux-user: add SIOCADDRT/SIOCDELRT supportLaurent Vivier
This allows to pass the device name. You can test this with the "route" command. WITHOUT this patch: $ sudo route add -net default gw 10.0.3.1 eth0 SIOCADDRT: Bad address $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Ifa 10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth WITH this patch: $ sudo route add -net default gw 10.0.3.1 eth0 $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Ifa 0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth 10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05linux-user: handle /proc/$$ like /proc/selfAndreas Schwab
Some applications use /proc/$$/... (where $$ is the own pid) instead of /proc/self/... to refer to their own proc files. Extend the interception for open and readlink to handle this case. Also, do the same interception in readlinkat. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Change cpu_exit() argument to CPUStateAndreas Färber
It no longer depends on CPUArchState, so move it to qom/cpu.c. Prepares for changing GDBState::c_cpu to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-14main: use TARGET_ARCH only for the target-specific #definePaolo Bonzini
Everything else needs to match the executable name, which is TARGET_NAME. Before: $ sh4eb-linux-user/qemu-sh4eb --help usage: qemu-sh4 [options] program [arguments...] Linux CPU emulator (compiled for sh4 emulation) After: $ sh4eb-linux-user/qemu-sh4eb --help usage: qemu-sh4eb [options] program [arguments...] Linux CPU emulator (compiled for sh4eb emulation) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1370349928-20419-5-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 22:31:25 +0000