aboutsummaryrefslogtreecommitdiff
path: root/linux-user
AgeCommit message (Collapse)Author
2021-09-23linux-user/aarch64: Use force_sig_fault()Peter Maydell
Use the new force_sig_fault() function instead of setting up a target_siginfo_t and calling queue_signal(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user/arm: Use force_sig_fault()Peter Maydell
Use the new force_sig_fault() function instead of setting up a target_siginfo_t and calling queue_signal(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-7-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user: Provide new force_sig_fault() functionPeter Maydell
In many places in the linux-user code we need to queue a signal for the guest using the QEMU_SI_FAULT si_type. This requires that the caller sets up and passes us a target_siginfo, including setting the appropriate part of the _sifields union for the si_type. In a number of places the code forgets to set the _sifields union field. Provide a new force_sig_fault() function, which does the same thing as the Linux kernel function of that name -- it takes the signal number, the si_code value and the address to use in _sifields._sigfault, and assembles the target_siginfo itself. This makes the callsites simpler and means it's harder to forget to pass in an address value. We follow force_sig() and the kernel's force_sig_fault() in not requiring the caller to pass in the CPU pointer but always acting on the CPU of the current thread. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-6-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user: Zero out target_siginfo_t in force_sig()Peter Maydell
The target_siginfo_t we populate in force_sig() will eventually get copied onto the target's stack. Zero it out so that any extra padding in the sifields union is consistently zero when the guest sees it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-5-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user/arm: Use force_sig() to deliver fpa11 emulation SIGFPEPeter Maydell
In the Arm target code, when the fpa11 emulation code tells us we need to send the guest a SIGFPE, we do this with queue_signal(), but we are using the wrong si_type, and we aren't setting the _sifields union members corresponding to either the si_type we are using or the si_type we should be using. As the existing comment notes, the kernel code for this calls the old send_sig() function to deliver the signal. This eventually results in the kernel's signal handling code fabricating a siginfo_t with a SI_KERNEL code and a zero pid and uid. For QEMU this means we need to use QEMU_SI_KILL. We already have a function for that: force_sig() sets up the whole target_siginfo_t the way we need it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user/arm: Set siginfo_t addr field for SIGTRAP signalsPeter Maydell
When generating a TRAP_BRKPT SIGTRAP, set the siginfo_t addr field to the PC where the breakpoint/singlestep trap occurred; this is what the kernel does for this signal for this architecture. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-3-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user/aarch64: Set siginfo_t addr field for SIGTRAP signalsPeter Maydell
When generating a TRAP_BRKPT SIGTRAP, set the siginfo_t addr field to the PC where the breakpoint/singlestep trap occurred; this is what the kernel does for this signal for this architecture. Fixes: Coverity 1459154 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-16Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-6.2-pull-request' into staging Pull request linux-user 20210916 Code cleanup # gpg: Signature made Thu 16 Sep 2021 16:11:58 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-6.2-pull-request: linux-user: Check lock_user result for ip_mreq_source sockopts linux-user: Drop unneeded includes from qemu.h linux-user: Don't include gdbstub.h in qemu.h linux-user: Split linux-user internals out of qemu.h linux-user: Split safe-syscall macro into its own header linux-user: Split mmap prototypes into user-mmap.h linux-user: Split loader-related prototypes into loader.h linux-user: Split signal-related prototypes into signal-common.h linux-user: Split strace prototypes into strace.h linux-user: Fix coding style nits in qemu.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-16linux-user: Check lock_user result for ip_mreq_source sockoptsPeter Maydell
In do_setsockopt(), the code path for the options which take a struct ip_mreq_source (IP_BLOCK_SOURCE, IP_UNBLOCK_SOURCE, IP_ADD_SOURCE_MEMBERSHIP and IP_DROP_SOURCE_MEMBERSHIP) fails to check the return value from lock_user(). Handle this in the usual way by returning -TARGET_EFAULT. (In practice this was probably harmless because we'd pass a NULL pointer to setsockopt() and the kernel would then return EFAULT.) Fixes: Coverity CID 1459987 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210809155424.30968-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-14user: Remove cpu_get_pic_interrupt() stubsPhilippe Mathieu-Daudé
cpu_get_pic_interrupt() is now unreachable from user-mode, delete the unnecessary stubs. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-25-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-13linux-user: Drop unneeded includes from qemu.hPeter Maydell
Trim down the #includes in qemu.h where we can, either by dropping unneeded headers or by moving them to user-internals.h. This includes deleting a couple of #includes that appear at weird points midway through the header file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-10-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Don't include gdbstub.h in qemu.hPeter Maydell
Currently the linux-user qemu.h pulls in gdbstub.h. There's no real reason why it should do this; include it directly from the C files which require it, and drop the include line in qemu.h. (Note that several of the C files previously relying on this indirect include were going out of their way to only include gdbstub.h conditionally on not CONFIG_USER_ONLY!) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-9-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split linux-user internals out of qemu.hPeter Maydell
qemu.h is included in various non-linux-user files (which mostly want the TaskState struct and the functions for doing usermode access to guest addresses like lock_user(), unlock_user(), get_user*(), etc). Split out the parts that are only used in linux-user itself into a new user-internals.h. This leaves qemu.h with basically three things: * the definition of the TaskState struct * the user-access functions and macros * do_brk() all of which are needed by code outside linux-user that includes qemu.h. The addition of all the extra #include lines was done with sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user) (and then undoing the change to fpa11.h). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split safe-syscall macro into its own headerPeter Maydell
Split the safe-syscall macro from qemu.h into a new safe-syscall.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-7-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split mmap prototypes into user-mmap.hPeter Maydell
Split out the mmap prototypes into a new header user-mmap.h which we only include where required. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-6-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split loader-related prototypes into loader.hPeter Maydell
Split guest-binary loader prototypes out into a new header loader.h which we include only where required. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-5-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split signal-related prototypes into signal-common.hPeter Maydell
Split the signal related prototypes into the existing header file signal-common.h, and include it in those places that now require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split strace prototypes into strace.hPeter Maydell
The functions implemented in strace.c are only used in a few files in linux-user; split them out of qemu.h and into a new strace.h header which we include in the places that need it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-3-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Fix coding style nits in qemu.hPeter Maydell
We're about to move a lot of the code in qemu.h out into different header files; fix the coding style nits first so that checkpatch is happy with the pure code-movement patches. This is mostly block-comment style but also a few whitespace issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-02plugins: allow plugin arguments to be passed directlyMahmoud Mandour
Passing arguments to plugins had to be done through "arg=<argname>". This is redundant and introduces confusion especially when the argument has a name and value (e.g. `-plugin plugin_name,arg="argname=argvalue"`). This allows passing plugin arguments directly e.g: `-plugin plugin_name,argname=argvalue` For now, passing arguments through "arg=" is still supports but outputs a deprecation warning. Also, this commit makes boolean arguments passed to plugins in the `argname=on|off` form instead of the deprecated short-boolean form. Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210730135817.17816-2-ma.mandourr@gmail.com>
2021-08-26target/arm: Do hflags rebuild in cpsr_write()Peter Maydell
Currently we rely on all the callsites of cpsr_write() to rebuild the cached hflags if they change one of the CPSR bits which we use as a TB flag and cache in hflags. This is a bit awkward when we want to change the set of CPSR bits that we cache, because it means we need to re-audit all the cpsr_write() callsites to see which flags they are writing and whether they now need to rebuild the hflags. Switch instead to making cpsr_write() call arm_rebuild_hflags() itself if one of the bits being changed is a cached bit. We don't do the rebuild for the CPSRWriteRaw write type, because that kind of write is generally doing something special anyway. For the CPSRWriteRaw callsites in the KVM code and inbound migration we definitely don't want to recalculate the hflags; the callsites in boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves anyway because of other CPU state changes they make. This allows us to drop explicit arm_rebuild_hflags() calls in a couple of places where the only reason we needed to call it was the CPSR write. This fixes a bug where we were incorrectly failing to rebuild hflags in the code path for a gdbstub write to CPSR, which meant that you could make QEMU assert by breaking into a running guest, altering the CPSR to change the value of, for example, CPSR.E, and then continuing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210817201843.3829-1-peter.maydell@linaro.org
2021-08-05linux-user/elfload: byteswap i386 registers when dumping coreIlya Leoshkevich
Core dumps from emulating x86_64 on big-endian hosts contain incorrect register values. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210803172013.148446-1-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-08-05linux-user: fix guest/host address mixup in i386 setup_rt_frame()Ilya Leoshkevich
setup_rt_frame() passes siginfo and ucontext host addresses to guest signal handlers, causing problems when e.g. emulating x86_64 on s390x. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210803171858.148394-1-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-08-03linux-user/s390x: signal with SIGFPE on compare-and-trapJonathan Albrecht
Currently when a compare-and-trap instruction is executed, qemu will always raise a SIGILL signal. On real hardware, a SIGFPE is raised. Change the PGM_DATA case in cpu_loop to follow the behavior in linux kernel /arch/s390/kernel/traps.c. * Only raise SIGILL if DXC == 0 * If DXC matches a non-simulated IEEE exception, raise SIGFPE with correct si_code * Raise SIGFPE with si_code == 0 for everything else When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes crashes in the java jdk such as the linked bug. Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Buglink: https://bugs.launchpad.net/qemu/+bug/1920913 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319 Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-08-03target/s390x: Fix SIGILL and SIGFPE psw.addr reportingIlya Leoshkevich
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the instruction, and at the instruction for other signals. Currently under qemu-user for SIGFILL and SIGFPE it points at the instruction. Fix by advancing psw.addr for these signals. Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319 Message-Id: <20210705210434.45824-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-07-26linux-user/syscall: Remove unused variable from execveRichard Henderson
From clang-13: linux-user/syscall.c:8503:17: error: variable 'total_size' set but not used \ [-Werror,-Wunused-but-set-variable] Acked-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-23tcg/plugins: implement a qemu_plugin_user_exit helperAlex Bennée
In user-mode emulation there is a small race between preexit_cleanup and exit_group() which means we may end up calling instrumented instructions before the kernel reaps child threads. To solve this we implement a new helper which ensures the callbacks are flushed along with any translations before we let the host do it's a thing. While we are at it make the documentation of qemu_plugin_register_atexit_cb clearer as to what the user can expect. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Mahmoud Mandour <ma.mandourr@gmail.com> Acked-by: Warner Losh <imp@bsdimp.com> Message-Id: <20210720232703.10650-21-alex.bennee@linaro.org>
2021-07-21qemu/atomic: Add aligned_{int64,uint64}_t typesRichard Henderson
Use it to avoid some clang-12 -Watomic-alignment errors, forcing some structures to be aligned and as a pointer when we have ensured that the address is aligned. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-13linux-user: update syscall.tbl to Linux v5.13Laurent Vivier
Updated running scripts/update-syscalltbl.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210708215756.268805-4-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13linux-user, mips: update syscall-args-o32.c.inc to Linux v5.13Laurent Vivier
Updated running scripts/update-mips-syscall-args.sh scripts/update-mips-syscall-args.sh has been updated to reflect file directory changes in strace repository. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210708215756.268805-3-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13linux-user: update syscall_nr.h to Linux v5.13Laurent Vivier
Automatically generated using scripts/gensyscalls.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20210708215756.268805-2-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12fd-trans: Fix race condition on reallocation of the translation table.Owen Anderson
The mapping from file-descriptors to translator functions is not guarded on realloc which may cause invalid function pointers to be read from a previously deallocated mapping. Signed-off-by: Owen Anderson <oanderso@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210701221255.107976-1-oanderso@google.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user/syscall: Remove ERRNO_TABLE_SIZE checkPhilippe Mathieu-Daudé
Now than target_to_host_errno() always return an errno, we can remove the unused and arbitrary ERRNO_TABLE_SIZE definition. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210708170550.1846343-9-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user: Simplify host <-> target errno conversion using macrosPhilippe Mathieu-Daudé
Convert the host_to_target_errno_table[] array to a switch case to allow compiler optimizations (such noticing the identity function when host and guest errnos match). Extract the errnos list as to a new includible unit, using a generic macro. Remove the code related to target_to_host_errno_table[] initialization. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210708170550.1846343-8-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user/mips: Move errno definitions to 'target_errno_defs.h'Philippe Mathieu-Daudé
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-7-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user/hppa: Move errno definitions to 'target_errno_defs.h'Philippe Mathieu-Daudé
Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-6-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user/alpha: Move errno definitions to 'target_errno_defs.h'Philippe Mathieu-Daudé
Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-5-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user: Extract target errno to 'target_errno_defs.h'Philippe Mathieu-Daudé
We want to access the target errno indepently of the rest of the linux-user code. Move the header containing the generic errno definitions ('errno_defs.h') to 'generic/target_errno_defs.h', create a new 'target_errno_defs.h' in each target which itself includes 'generic/target_errno_defs.h'. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user/sparc: Rename target_errno.h -> target_errno_defs.hPhilippe Mathieu-Daudé
We want to have one generic target_errno.h (API to access target errno), and will add target errno definitions in target_errno_defs.h. The sparc target already have its errnos in an header, simply rename it. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user/syscall: Fix RF-kill errno (typo in ERFKILL)Philippe Mathieu-Daudé
Affected targets: alpha, hppa, mips/64, sparc Fixes: fe8ed7d5794 ("linux-user: Handle ERFKILL and EHWPOISON") Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user/syscall: Remove hardcoded tabs (code style)Philippe Mathieu-Daudé
We are going to move this code, fix its style first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210704183755.655002-12-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user/alpha: Remove hardcoded tabs (code style)Philippe Mathieu-Daudé
We are going to move this code, fix its style first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210704183755.655002-7-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user/mips: Handle TARGET_EWOULDBLOCK as TARGET_EAGAINPhilippe Mathieu-Daudé
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210704183755.655002-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user/hppa: Handle TARGET_EWOULDBLOCK as TARGET_EAGAINPhilippe Mathieu-Daudé
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210704183755.655002-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user/alpha: Handle TARGET_EWOULDBLOCK as TARGET_EAGAINPhilippe Mathieu-Daudé
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210704183755.655002-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user: Fix style problems in linuxload.cRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210706234932.356913-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user: fill ppid field in /proc/self/statAndreas Schwab
Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmwnqnef5g.fsf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user/elfload: Implement ELF_HWCAP for RISC-VKito Cheng
Set I, M, A, F, D and C bit for hwcap if misa is set. Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210706035015.122899-1-kito.cheng@sifive.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-22Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-6.1-pull-request' into staging Linux-user pull request 20210621 # gpg: Signature made Mon 21 Jun 2021 12:03:53 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-6.1-pull-request: linux-user: Use public sigev_notify_thread_id member if available linux-user: Fix incorrect use of feature-test-macros linux-user: Check for ieee128 fpbits in PPC64 HWCAP2 feature list tests/tcg/linux-test: Check that sigaction can query SIGKILL/SIGSTOP linux-user: Let sigaction query SIGKILL/SIGSTOP linux-user: Implement pivot_root linux-user/trace-events: fix minor typo in format string linux-user: Disable static assert involving __SIGRTMAX if it is missing linux-user: Set CF_PARALLEL when mapping shared memory Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-21linux-user/s390x: Save and restore psw.mask properlyRichard Henderson
At present, we're referencing env->psw.mask directly, which fails to ensure that env->cc_op is incorporated or updated. Use s390_cpu_{set_psw,get_psw_mask} to fix this. Mirror the kernel's cleaning of the psw.mask in save_sigregs and restore_sigregs. Ignore PSW_MASK_RI for now, as qemu does not support that. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com> Tested-by: <ruixin.bao@ibm.com> Message-Id: <20210615030744.1252385-6-richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 07:41:23 +0000