Age | Commit message (Collapse) | Author |
|
handle_vm86_fault has been unused since:
1ade5b2fed ("linux-user/i386: Split out maybe_handle_vm86_trap")
Remove it, and it's local macros.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Keep all user emulation headers under the same user/ directory.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240428221450.26460-2-philmd@linaro.org>
|
|
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-7-alex.bennee@linaro.org>
|
|
Pass the address of the last byte of the image, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
|
|
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Currently QEMU ignores madvise(MADV_DONTNEED), which break apps that
rely on this for zeroing out memory [1]. Improve the situation by doing
a passthrough when the range in question is a host-page-aligned
anonymous mapping.
This is based on the patches from Simon Hausmann [2] and Chris Fallin
[3]. The structure is taken from Simon's patch. The PAGE_MAP_ANONYMOUS
bits are superseded by commit 26bab757d41b ("linux-user: Introduce
PAGE_ANON"). In the end the patch acts like the one from Chris: we
either pass-through the entire syscall, or do nothing, since doing this
only partially would not help the affected applications much. Finally,
add some extra checks to match the behavior of the Linux kernel [4].
[1] https://gitlab.com/qemu-project/qemu/-/issues/326
[2] https://patchew.org/QEMU/20180827084037.25316-1-simon.hausmann@qt.io/
[3] https://github.com/bytecodealliance/wasmtime/blob/v0.37.0/ci/qemu-madvise.patch
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/mm/madvise.c?h=v5.19-rc3#n1368
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220621144205.158452-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220509205728.51912-4-philippe.mathieu.daude@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220509205728.51912-3-philippe.mathieu.daude@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
|
|
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The MIPS n32 ABI is basically n64 with the address space (i.e. pointer
width) shrinked to 32 bits. Meanwhile the current code treats it as
o32-like based on TARGET_ABI_BITS, which causes problems with n32
syscalls utilizing 64-bit offsets, like pread64, affecting most (if not
all) recently built n32 binaries.
This partially solves issue #909 ("qemu-mipsn32(el) user mode emulator
fails to execute any recently built n32 binaries"); with this change
applied, the built qemu-mipsn32el is able to progress beyond the
pread64, and finish _dl_start_user for the "getting ld.so load libc.so"
case. The program later dies with SIGBUS, though, due to _dl_start_user
not maintaining stack alignment after removing ld.so itself from argv,
and qemu-user starting to enforce alignment recently, but that is
orthogonal to the issue here; the more common case of chrooting is
working, verified with my own-built Gentoo n32 sysroot. (Depending on
the exact ISA used, one may have to explicitly specify QEMU_CPU, which
is the case for my chroot.)
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/909
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220320052259.1610883-1-xen0n@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
cpu_loop() never exits, so mark it with QEMU_NORETURN.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20211106113916.544587-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
All supported hosts now define HAVE_SAFE_SYSCALL, so remove
the ifdefs. This leaves hostdep.h empty, so remove it.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Trim down the #includes in qemu.h where we can, either by
dropping unneeded headers or by moving them to user-internals.h.
This includes deleting a couple of #includes that appear at
weird points midway through the header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-10-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|