aboutsummaryrefslogtreecommitdiff
path: root/linux-user/syscall.c
AgeCommit message (Collapse)Author
2013-07-29linux-user: Return success from m68k set_thread_area syscallPeter Maydell
The m68k set_thread_area syscall implementation failed to set the return value. Correctly set it zero, since this syscall will always succeed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1375093909-13653-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23linux-user: Reset copied CPUs in cpu_copy() alwaysAlexander Graf
When a new thread gets created, we need to reset non arch specific state to get the new CPU into clean state. However this reset should happen before the arch specific CPU contents get copied over. Otherwise we end up having clean reset state in our newly created thread. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Fix pipe syscall return for SPARCPeter Maydell
SPARC is one of the CPUs which has a funny syscall ABI for the pipe syscall; add it to the set of special cases in do_pipe(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Make NPTL non-optionalPeter Maydell
Now all linux-user targets support building with NPTL, we can make it mandatory. This is a good idea because: * NPTL is no longer new and experimental; it is completely standard * in practice, linux-user without NPTL is nearly useless for binaries built against non-ancient glibc * it allows us to delete the rather untested code for handling the non-NPTL configuration Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the bsd-user codebase alone. This makes no change for bsd-user, since our configure test for NPTL had a "#include <linux/futex.h>" which means bsd-user would never have been compiled with CONFIG_USE_NPTL defined, and it still is not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for x86-64Peter Maydell
Add x86-64 implementation of cpu_set_tls() (like the kernel, we just have to call do_arch_prctl() to set FS); this allows us to enable NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add i386 TLS setterAlexander Graf
We can easily set the TLS on i386. Add code to do so. Signed-off-by: Alexander Graf <agraf@suse.de> [PMM: also remove "target_nptl=no" line from configure, for consistency with other patches in this series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Clean up handling of clone() argument orderPeter Maydell
Linux manages to have three separate orderings of the arguments to the clone() syscall on different architectures. In the kernel these are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2. Clean up our implementation of this to use similar #define names rather than a TARGET_* ifdef ladder. This includes behaviour changes fixing bugs on cris, x86-64, m68k, openrisc and unicore32. cris had explicit but wrong handling; the others were just incorrectly using QEMU's default, which happened to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears to be broken in the mainline kernel in that it tries to use arg3 for both parent_tidptr and newtls simultaneously -- we don't attempt to emulate this bug...) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add missing 'break' in i386 get_thread_area syscallPeter Maydell
The i386 code for the get_thread_area syscall was missing a 'break' which meant it would have fallen through into the implementation of the following syscall; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for m68kPeter Maydell
For m68k, per-thread data is a purely kernel construct with no CPU level support. Implement it via a field in the TaskState structure, used by cpu_set_tls() and the set_thread_area/get_thread_area syscalls. This allows us to enable compilation with NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-10Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into stagingAnthony Liguori
QOM CPUState refactorings * Fix for OpenRISCCPU subclasses * Fix for gdbstub CPU selection * Move linux-user CPU functions into new header * CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al. * Fix some targets to consistently inline TCG code generation * Centrally log CPU reset # gpg: Signature made Wed 10 Jul 2013 07:52:39 AM CDT using RSA key ID 3E7E013F # gpg: Can't check signature: public key not found # By Andreas Färber (41) and others # Via Andreas Färber * afaerber/tags/qom-cpu-for-anthony: (43 commits) cpu: Move reset logging to CPUState target-ppc: Change LOG_MMU_STATE() argument to CPUState target-i386: Change LOG_PCALL_STATE() argument to CPUState log: Change log_cpu_state[_mask]() argument to CPUState target-i386: Change do_smm_enter() argument to X86CPU target-i386: Change do_interrupt_all() argument to X86CPU target-xtensa: Change gen_intermediate_code_internal() arg to XtensaCPU target-unicore32: Change gen_intermediate_code_internal() signature target-sparc: Change gen_intermediate_code_internal() argument to SPARCCPU target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPU target-s390x: Change gen_intermediate_code_internal() argument to S390CPU target-ppc: Change gen_intermediate_code_internal() argument to PowerPCCPU target-mips: Change gen_intermediate_code_internal() argument to MIPSCPU target-microblaze: Change gen_intermediate_code_internal() argument types target-m68k: Change gen_intermediate_code_internal() argument to M68kCPU target-lm32: Change gen_intermediate_code_internal() argument to LM32CPU target-i386: Change gen_intermediate_code_internal() argument to X86CPU target-cris: Change gen_intermediate_code_internal() argument to CRISCPU target-arm: Change gen_intermediate_code_internal() argument to ARMCPU target-alpha: Change gen_intermediate_code_internal() argument to AlphaCPU ...
2013-07-09linux-user: Change thread_env to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Clean up do_syscall() Coding Style for TARGET_NR_exitAndreas Färber
In particular fix 6-/10-char indentation. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-05linux-user: improve target_to_host_sock_type conversionPetar Jovanovic
Previous implementation has failed to take into account different value of SOCK_NONBLOCK on target and host, and existence of SOCK_CLOEXEC. The same conversion has to be applied both for do_socket and do_socketpair, so the code has been isolated in a static inline function. enum sock_type in linux-user/socket.h has been extended to include TARGET_SOCK_CLOEXEC and TARGET_SOCK_NONBLOCK, similar to definition in libc. The patch also includes necessary code style changes (tab to spaces) in the header file since most of the file has been touched by this change. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Message-id: 1372639454-7560-1-git-send-email-petar.jovanovic@rt-rk.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05linux-user: Fix sys_utimensat (would not compile on old glibc)Peter Maydell
Commit c0d472b12e accidentally dropped the definition of __NR_SYS_utimensat even though its use is guarded by CONFIG_UTIMENSAT, not CONFIG_ATFILE. Some older glibc don't have utimensat() (even if they have the other *at() functions). Fix this by correctly cleaning up the sys_utimensat() implementation and #defines, so that we always provide the syscall if needed whether we're doing it via glibc or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 1371743841-26110-1-git-send-email-peter.maydell@linaro.org
2013-07-05linux-user: add SIOCADDRT/SIOCDELRT supportLaurent Vivier
This allows to pass the device name. You can test this with the "route" command. WITHOUT this patch: $ sudo route add -net default gw 10.0.3.1 eth0 SIOCADDRT: Bad address $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Ifa 10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth WITH this patch: $ sudo route add -net default gw 10.0.3.1 eth0 $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Ifa 0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth 10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05linux-user: handle /proc/$$ like /proc/selfAndreas Schwab
Some applications use /proc/$$/... (where $$ is the own pid) instead of /proc/self/... to refer to their own proc files. Extend the interception for open and readlink to handle this case. Also, do the same interception in readlinkat. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-12linux-user: Drop direct use of openat etc syscallsPeter Maydell
The linux-user syscall emulation layer currently supports the openat family of syscalls via two mechanisms: simply calling the corresponding libc functions, and making direct syscalls. Since glibc has supported these functions since at least glibc 2.5, there's no real need to retain the (essentially untested) direct syscall fallback code, so simply delete it. This allows us to remove some ifdeffery that was attempting to disable provision of some of the syscalls if the host didn't seem to support them, which in some cases was actually wrong (eg where there are several flavours of the syscall and we only need one of them, not necessarily the exact one the guest has, as with the fstatat* calls). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Message-id: 1370126121-22975-2-git-send-email-peter.maydell@linaro.org
2013-06-12linux-user: Allow getdents to be provided by getdents64Peter Maydell
Newer architectures may only implement the getdents64 syscall, not getdents. Provide an implementation of getdents in terms of getdents64 so that we can run getdents-using targets on a getdents64-only host. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Message-id: 1370344377-27445-1-git-send-email-peter.maydell@linaro.org Message-id: 1370193044-24535-1-git-send-email-peter.maydell@linaro.org
2013-06-01linux-user: Fix typo in commentLei Li
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-18fix /proc/self/maps outputChristophe Lyon
Add a space at end of line when there is no filename to print, to conform to linux kernel format (see show_map_vma() in fs/proc/task_mmu.c). Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-04-26linux-user: fix compile error due to stray colon at end of #ifdef linePeter Maydell
Remove a stray colon from the end of a #ifdef line. Some versions of gcc complain about this: linux-user/syscall.c: In function ‘do_syscall’: linux-user/syscall.c:7606:28: error: extra tokens at end of #ifdef directive [-Werror] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19linux-user: fix setgroups/getgroups for non-UID16 archsAndreas Schwab
Don't assume target_id is a short. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19linux-user: fix undefined shift in copy_to_user_fdsetAndreas Schwab
If TARGET_ABI_BITS is bigger than 32 we shift by more than the size of int. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19linux-user: change do_semop to return target errno when unsuccessfulPetar Jovanovic
do_semop() is called from two places, and one of these fails to convert return error to target errno when semop fails. This patch changes the function to always return target errno in case of an unsuccessful call. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-12linux-user: pass correct host flags to eventfd2 callPetar Jovanovic
This change makes conversion of TARGET_O_NONBLOCK and TARGET_O_CLOEXEC flags to host flags before calling eventfd for TARGET_NR_eventfd2. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-11linux-user/syscall.c: Don't warn about unimplemented get_robust_listPeter Maydell
The nature of the kernel ABI for the get_robust_list and set_robust_list syscalls means we cannot implement them in QEMU. Make get_robust_list silently return ENOSYS rather than using the default "print message and then fail ENOSYS" code path, in the same way we already do for set_robust_list, and add a comment documenting why we do this. This silences warnings which were being produced for emulating even trivial programs like 'ls' in x86-64-on-x86-64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Implement accept4Peter Maydell
Implement the accept4 syscall (which is identical to accept but has an additional flags argument). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Implement sendfile and sendfile64Peter Maydell
Implement the sendfile and sendfile64 syscalls. This implementation passes all the LTP test cases for these syscalls. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: make bogus negative iovec lengths fail EINVALPeter Maydell
If the guest passes us a bogus negative length for an iovec, fail EINVAL rather than proceeding blindly forward. This fixes some of the error cases tests for readv and writev in the LTP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Support setgroups syscall with no groupsDillon Amburgey
Signed-off-by: Dillon Amburgey <dillona@dillona.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user/syscall.c: handle FUTEX_WAIT_BITSET in do_futexJohn Rigby
Upstream libc has recently changed to start using FUTEX_WAIT_BITSET instead of FUTEX_WAIT and this is causing do_futex to return -TARGET_ENOSYS. Pass bitset in val3 to sys_futex which will be ignored by kernel for the FUTEX_WAIT case. Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-02-16cpu: Move host_tid field to CPUStateAndreas Färber
Change gdbstub's cpu_index() argument to CPUState now that CPUArchState is no longer used. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-06Merge branch 'for-linux-user' of ↵Anthony Liguori
https://git.gitorious.org/qemu-m68k/qemu-m68k into staging * 'for-linux-user' of https://git.gitorious.org/qemu-m68k/qemu-m68k: linux-user: correct reboot() linux-user: correct setsockopt() linux-user: correct print_timeval() swap tv_sec and tv_usec linux-user: correct msgrcv() Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01cpu: do not use object_deletePaolo Bonzini
CPUs are never added to the composition tree, so delete is achieved simply by removing the last references to them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-30linux-user: correct reboot()Laurent Vivier
According to man reboot(2), the 4th argument is only used with LINUX_REBOOT_CMD_RESTART2. In other cases, trying to convert the value can generate EFAULT. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-01-30linux-user: correct setsockopt()Laurent Vivier
SO_SNDTIMEO and SO_RCVTIMEO take a struct timeval, not an int To test this, you can use : QEMU_STRACE= ping localhost 2>&1 |grep TIMEO 568 setsockopt(3,SOL_SOCKET,SO_SNDTIMEO,{1,0},8) = 0 568 setsockopt(3,SOL_SOCKET,SO_RCVTIMEO,{1,0},8) = 0 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-01-30linux-user: correct msgrcv()Laurent Vivier
All parameters must be swapped before the call of do_msgrcv(). Allow faked (debian fakeroot daemon) to work properly. WITHOUT this patch: $ faked-sysv --foreground --debug using 1723744788 as msg key msg_key=1723744788 1723744788:431 FAKEROOT: msg=131072, key=1723744788 FAKEROOT: r=-1, received message type=-150996052, message=-160219330 FAKEROOT, get_msg: Bad address r=14, EINTR=4 fakeroot: clearing up message queues and semaphores, signal=-1 fakeroot: database save FAILED WITH this patch: $ faked-sysv --foreground --debug using 1569385744 as msg key msg_key=1569385744 1569385744:424 FAKEROOT: msg=0, key=1569385744 ^C fakeroot: clearing up message queues and semaphores, signal=2 fakeroot: database save FAILED Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-01-16alpha-linux-user: Correct selectLaurent Vivier
Alpha, like s390x, passes all select arguments in registers. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-01-16alpha-linux-user: Translate fcntl l_typeLaurent Vivier
The values of F_RDLCK, F_WRLCK, F_UNLCK, F_EXLCK, F_SHLCK differ between alpha and other linux architectures. This patch allows to run "dpkg" (database lock). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-01-04linux-user/syscall.c: remove forward declarationsJohn Spencer
instead use the correct headers that define these functions. Requested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: John Spencer <maillist-qemu@barfooze.de> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19Merge remote-tracking branch 'bonzini/header-dirs' into stagingAnthony Liguori
* bonzini/header-dirs: (45 commits) janitor: move remaining public headers to include/ hw: move executable format header files to hw/ fpu: move public header file to include/fpu softmmu: move remaining include files to include/ subdirectories softmmu: move include files to include/sysemu/ misc: move include files to include/qemu/ qom: move include files to include/qom/ migration: move include files to include/migration/ monitor: move include files to include/monitor/ exec: move include files to include/exec/ block: move include files to include/block/ qapi: move include files to include/qobject/ janitor: add guards to headers qapi: make struct Visitor opaque qapi: remove qapi/qapi-types-core.h qapi: move inclusions of qemu-common.h from headers to .c files ui: move files to ui/ and include/ui/ qemu-ga: move qemu-ga files to qga/ net: reorganize headers net: move net.c to net/ ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-18linux-user/syscall.c: remove wrong forward decl of setgroups()John Spencer
this declaration is wrong: the correct prototype on linux is: int setgroups(size_t size, const gid_t *list); since by default musl libc exposes this symbol in unistd.h additionally to grp.h, the wrong declaration causes a build error. the proper fix is to simply include the correct header. Signed-off-by: John Spencer <maillist-qemu@barfooze.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-08linux-user: Merge pread/pwrite into pread64/pwrite64Peter Maydell
The Linux syscalls underlying pread() and pwrite() take a 64 bit offset on all architectures, even if some of them name the syscall "pread/pwrite" rather than "pread64/pwrite64" for historical reasons. So move the four QEMU target architectures (arm, i386, sparc, unicore32) which were defining TARGET_NR_pread/pwrite to define TARGET_NR_pread64/pwrite64 instead, and drop the TARGET_NR_pread/pwrite implementation code completely. (Based on examination of the kernel sources for the four architectures this patch affects.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-19Merge branch 'linux-user-for-upstream' of ↵Aurelien Jarno
git://git.linaro.org/people/rikuvoipio/qemu * 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu: linux-user: register align p{read, write}64 linux-user: ppc: mark as long long aligned tcg: Remove TCG_TARGET_HAS_GUEST_BASE define configure: Remove unnecessary host_guest_base code linux-user: If loading fails, print error as string, not number linux-user: Fix siginfo handling alpha-linux-user: Fix sigaltstack structure definition linux-user: Implement gethostname linux-user: Perform more checks on iovec lists linux-user: fix multi-threaded /proc/self/maps linux-user: fix statfs
2012-10-19microblaze: Support setting of TLS ptrEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-10-12linux-user: register align p{read, write}64Alexander Graf
pread64 and pwrite64 pass 64bit parameters which for some architectures need to be aligned to special argument pairs, creating a gap argument. Handle this special case the same way we handle it in other places of the code. Reported-by: Alex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Alex Barcelo <abarcelo@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12linux-user: ppc: mark as long long alignedAlexander Graf
The SysV PPC32 ABI dictates that long long (64bit) parameters are pass in odd/even register pairs. Because unlike ARM and MIPS we start at an odd register number, we can reuse the same aligning code that ARM and MIPS use. Clarified inline comment that it is SysV ABI that requires long long aligned parameters - Riku Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12linux-user: Fix siginfo handlingRichard Henderson
Compare signal numbers in the proper domain. Convert all of the fields for SIGIO and SIGCHLD. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-04 12:31:50 +0000