aboutsummaryrefslogtreecommitdiff
path: root/linux-user/sparc/signal.c
AgeCommit message (Collapse)Author
2023-11-05target/sparc: Introduce cpu_put_psr_iccRichard Henderson
Isolate linux-user from changes to icc representation. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-10linux-user/sparc: Fix sparc64_{get, set}_context trapsRichard Henderson
These traps are present for sparc64 with ilp32, aka sparc32plus. Enabling them means adjusting the defines over in signal.c, and fixing an incorrect usage of abi_ulong when we really meant the full register, target_ulong. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230216054516.1267305-7-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-12-19linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURNRichard Henderson
This value is fully internal to qemu, and so is not a TARGET define. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-01linux-user/sparc: Implement setup_sigtrampRichard Henderson
Create and record the two signal trampolines. Use them when the guest does not use SA_RESTORER. Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210929130553.121567-24-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split linux-user internals out of qemu.hPeter Maydell
qemu.h is included in various non-linux-user files (which mostly want the TaskState struct and the functions for doing usermode access to guest addresses like lock_user(), unlock_user(), get_user*(), etc). Split out the parts that are only used in linux-user itself into a new user-internals.h. This leaves qemu.h with basically three things: * the definition of the TaskState struct * the user-access functions and macros * do_brk() all of which are needed by code outside linux-user that includes qemu.h. The addition of all the extra #include lines was done with sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user) (and then undoing the change to fpa11.h). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Implement sparc64 rt signalsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-25-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Implement sparc32 rt signalsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-24-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Add 64-bit support to fpu save/restoreRichard Henderson
The shape of the kernel's __siginfo_fpu_t is dependent on the cpu type, not the abi. Which is weird, but there ya go. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-23-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Minor corrections to do_sigreturnRichard Henderson
Check that the input sp is 16 byte aligned, not 4. Do that before the lock_user_struct check. Validate the saved sp is 8 byte aligned. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-22-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Clean up setup_frameRichard Henderson
Clean up a goto label with a single use. Remove #if 0. Remove useless parentheses. Fold constants into __put_user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-21-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Add rwin_save to signal frameRichard Henderson
Stub it out to zero, but at least include it. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-20-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Save and restore fpu in signal frameRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-19-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Clean up get_sigframeRichard Henderson
Remove inline; fix spacing and comment format. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-18-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Split out save_reg_winRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-17-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Use target_pt_regsRichard Henderson
Replace __siginfo_t with target_pt_regs, and move si_mask into target_signal_frame directly. Extract save/restore functions for target_pt_regs. Adjust for sparc64 tstate. Use proper get/put functions for psr. Turns out we were already writing to si_mask twice, so no need to handle that in the new functions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-16-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Fix the stackframe structureRichard Henderson
Move target_reg_window up and use it. Fold structptr and xxargs into xargs -- the use of a host pointer was incorrect anyway. Rename the structure to target_stackf for consistency. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-15-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Remove target_rt_signal_frame as unusedRichard Henderson
It's wrong anyway. Remove it for now. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-14-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Remove target_sigcontext as unusedRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-13-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/sparc: Include TARGET_STACK_BIAS in get_sp_from_cpustateRichard Henderson
Move TARGET_STACK_BIAS from signal.c. Generic code cares about the logical stack pointer, not the physical one that has a bias applied for sparc64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-6-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18linux-user/sparc: Handle tstate in sparc64_get/set_context()Peter Maydell
Correctly implement save/restore of the tstate field in sparc64_get_context() and sparc64_set_context(): * Don't use the CWP value from the guest in set_context * Construct and save a tstate value rather than leaving it as zero in get_context To do this we factor out the "calculate TSTATE value from CPU state" code from sparc_cpu_do_interrupt() into its own sparc64_tstate() function; that in turn requires us to move some of the function prototypes out from inside a CPU_NO_IO_DEFS ifdef guard. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201106152738.26026-5-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18linux-user/sparc: Don't restore %g7 in sparc64_set_context()Peter Maydell
The kernel does not restore the g7 register in sparc64_set_context(); neither should we. (We still save it in sparc64_get_context().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201106152738.26026-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18linux-user/sparc: Remove unneeded checks of 'err' from sparc64_get_context()Peter Maydell
Unlike the kernel macros, our __get_user() and __put_user() do not return a failure code. Kernel code typically has a style of err |= __get_user(...); err |= __get_user(...); and then checking err at the end. In sparc64_get_context() our version of the code dropped the accumulating into err but left the "if (err) goto do_sigsegv" checks, which will never be taken. Delete unnecessary if()s. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201106152738.26026-3-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18linux-user/sparc: Correct sparc64_get/set_context() FPU handlingPeter Maydell
The handling of the FPU state in sparc64_get_context() and sparc64_set_context() is not the same as what the kernel actually does: we unconditionally read and write the FP registers and the FSR, GSR and FPRS, but the kernel logic is more complicated: * in get_context the kernel has code for saving FPU registers, but it is hidden inside an "if (fenab) condition and the fenab flag is always set to 0 (inside an "#if 1" which has been in the kernel for over 15 years). So the effect is that the FPU state part is always written as zeroes. * in set_context the kernel looks at the fenab field in the structure from the guest, and only restores the state if it is set; it also looks at the structure's FPRS to see whether either the upper or lower or both halves of the register file have valid data. Bring our implementations into line with the kernel: * in get_context: - clear the entire target_ucontext at the top of the function (as the kernel does) - then don't write the FPU state, so those fields remain zero - this fixes Coverity issue CID 1432305 by deleting the code it was complaining about * in set_context: - check the fenab and the fpsr to decide which parts of the FPU data to restore, if any - instead of setting the FPU registers by doing two 32-bit loads and filling in the .upper and .lower parts of the CPU_Double union separately, just do a 64-bit load of the whole register at once. This fixes Coverity issue CID 1432303 because we now access the dregs[] part of the mcfpu_fregs union rather than the sregs[] part (which is not large enough to actually cover the whole of the data, so we were accessing off the end of sregs[]) We change both functions in a single commit to avoid potentially breaking bisection. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201106152738.26026-2-peter.maydell@linaro.org> [lv: fix FPRS_DU loop s/31/32/] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-10linux-user/sparc: Don't zero high half of PC, NPC, PSR in sigreturnPeter Maydell
The function do_sigreturn() tries to store the PC, NPC and PSR in uint32_t local variables, which implicitly drops the high half of these fields for 64-bit guests. The usual effect was that a guest which used signals would crash on return from a signal unless it was lucky enough to take it while the PC was in the low 4GB of the address space. In particular, Debian /bin/dash and /bin/bash would segfault after executing external commands. Use abi_ulong, which is the type these fields all have in the __siginfo_t struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201105212314.9628-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-10linux-user/sparc: Correct set/get_context handling of fp and i7Peter Maydell
Because QEMU's user-mode emulation just directly accesses guest CPU state, for SPARC the guest register window state is not the same in the sparc64_get_context() and sparc64_set_context() functions as it is for the real kernel's versions of those functions. Specifically, for the kernel it has saved the user space state such that the O* registers go into a pt_regs struct as UREG_I*, and the I* registers have been spilled onto the userspace stack. For QEMU, we haven't done that, so the guest's O* registers are still in WREG_O* and the I* registers in WREG_I*. The code was already accessing the O* registers correctly for QEMU, but had copied the kernel code for accessing the I* registers off the userspace stack. Replace this with direct accesses to fp and i7 in the CPU state, and add a comment explaining why we differ from the kernel code here. This fix is sufficient to get bash to a shell prompt. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201105212314.9628-3-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-10linux-user/sparc: Fix errors in target_ucontext structuresPeter Maydell
The various structs that make up the SPARC target_ucontext had some errors: * target structures must not include fields which are host pointers, which might be the wrong size. These should be abi_ulong instead * because we don't have the 'long double' part of the mcfpu_fregs union in our version of the target_mc_fpu struct, we need to manually force it to be 16-aligned In particular, the lack of 16-alignment caused sparc64_get_context() and sparc64_set_context() to read and write all the registers at the wrong offset, which triggered a guest glibc stack check in siglongjmp: *** longjmp causes uninitialized stack frame ***: terminated when trying to run bash. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201105212314.9628-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user/sparc64: Fix target_signal_frameRichard Henderson
Instructions are always 4 bytes; use uint32_t not abi_ulong. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20191106113318.10226-9-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user/sparc: Fix WREG usage in setup_frameRichard Henderson
Use WREG_I0 not WREG_O0 in order to properly save the "ins". The "outs" were saved separately in setup___siginfo. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20191106113318.10226-8-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user/sparc: Use WREG_SP constant in sparc/signal.cRichard Henderson
s/UREG_FP/WREG_SP/g This is non-obvious because the UREG_FP constant is fact wrong. However, the previous search-and-replace patch made it clear that UREG_FP expands to WREG_O6, and we can see from the enumeration in target/sparc/cpu.h that WREG_O6 is in fact WREG_SP, the stack pointer. The UREG_SP define is unused; remove it. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20191106113318.10226-7-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user/sparc: Begin using WREG constants in sparc/signal.cRichard Henderson
This is non-obvious because the UREG constants are in fact wrong. s/UREG_I/WREG_O/g s/UREG_O/WREG_I/g s/UREG_L/WREG_L/g These substitutions have identical integer values. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20191106113318.10226-6-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-11-15linux-user/sparc/signal.c: Remove dead codePeter Maydell
Coverity complains (CID 1390847) about some dead code in do_sigreturn(). This is an if (err) clause that can never be true, copied from the kernel (where __get_user returns an error). The one code path that could report an error is in the currently commented-out pseudocode for handling FPU register restoring, so move the if into that comment (and fix the broken indent in the comment in the process). (The new position for the error check is also the semantically correct one -- we should not restore the signal mask from the signal frame if we get an error here, so the check must be done before set_sigmask(), not after.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-id: 20181115114616.26265-1-peter.maydell@linaro.org
2018-11-12linux-user: Remove dead error-checking codePeter Maydell
Remove some dead code spotted by Coverity (CID 1009855, 1390854, 1390847). The underlying cause in all these cases is the same: QEMU's put_user operations can't result in errors, but the kernel's equivalent does. So when code was copied from the kernel signal-frame-setup/teardown code, checks on error flags that were needed in the kernel became dead code for us. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20181019161715.12122-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-18linux-user/sparc/signal.c: Remove unnecessary commentPeter Maydell
Remove a comment suggesting that we need to call tb_flush() after writing the SPARC signal frame trampoline insns. This isn't necessary in QEMU, because (even if the guest architecture requires explicit icache maintenance) we ensure that memory writes result in invalidation of translated code from that memory. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20181009184017.15675-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-09linux-user: Do not report "syscall not implemented" by defaultPhilippe Mathieu-Daudé
This can still be reported using the "-d unimp" command line option. Code change produced with: git ls-files linux-user | \ xargs sed -i -E 's/fprintf\(stderr,\s?(".*not implemented\\n")\);/qemu_log_mask(LOG_UNIMP, \1);/g' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180706155127.7483-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-06-04linux-user: move get_sp_from_cpustate() to target_cpu.hLaurent Vivier
Remove useless includes Fix HPPA include guard. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-9-laurent@vivier.eu>
2018-05-03linux-user: introduce target_sigsp() and target_save_altstack()Laurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411192347.30228-1-laurent@vivier.eu>
2018-04-30linux-user: move sparc/sparc64 signal.c parts to sparc directoryLaurent Vivier
No code change, only move code from signal.c to sparc/signal.c, except adding includes and exporting setup_frame() and setup_rt_frame(). sparc64/signal.c includes sparc/signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-18-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch signal.cLaurent Vivier
Create a signal-common.h for future use by these new files and use it in the existing signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 00:33:24 +0000