| Age | Commit message (Collapse) | Author |
|---|
|
If a synchronous signal and an asynchronous signal arrive near simultaneously,
and the signal number of the asynchronous signal is lower than that of the
synchronous signal the the handler for the asynchronous would be called first,
and then the handler for the synchronous signal would be called within or
after the first handler with an incorrect context.
This is fixed by queuing synchronous signals separately. Note that this does
risk delaying a asynchronous signal until the synchronous signal handler
returns rather than handling the signal on another thread, but this seems
unlikely to cause problems for real guest programs and is unavoidable unless
we could guarantee to roll back and reexecute whatever guest instruction
caused the synchronous signal (which would be a bit odd if we've already
logged its execution, for instance, and would require careful analysis of
all guest CPUs to check it was possible in all cases).
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-24-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: added a comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
As host signals are now blocked whenever guest signals are blocked, the
queue of realtime signals is now in Linux. The QEMU queue is now
redundant and can be removed. (We already did not queue non-RT signals, and
none of the calls to queue_signal() except the one in host_signal_handler()
pass an RT signal number.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-23-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Both queue_signal() and process_pending_signals() did check for default
actions of signals, this is redundant and also causes fatal and stopping
signals to incorrectly cause guest system calls to be interrupted.
The code in queue_signal() is removed.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-21-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
If multiple host signals are received in quick succession they would
be queued in TaskState then delivered to the guest in spite of
signals being supposed to be blocked by the guest signal handler's
sa_mask. Fix this by decoupling the guest signal mask from the
host signal mask, so we can have protected sections where all
host signals are blocked. In particular we block signals from
when host_signal_handler() queues a signal from the guest until
process_pending_signals() has unqueued it. We also block signals
while we are manipulating the guest signal mask in emulation of
sigprocmask and similar syscalls.
Blocking host signals also ensures the correct behaviour with respect
to multiple threads and the overrun count of timer related signals.
Alas blocking and queuing in qemu is still needed because of virtual
processor exceptions, SIGSEGV and SIGBUS.
Blocking signals inside process_pending_signals() protects against
concurrency problems that would otherwise happen if host_signal_handler()
ran and accessed the signal data structures while process_pending_signals()
was manipulating them.
Since we now track the guest signal mask separately from that
of the host, the sigsuspend system calls must track the signal
mask passed to them, because when we process signals as we leave
the sigsuspend the guest signal mask in force is that passed to
sigsuspend.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-19-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: make signal_pending a simple flag rather than a word with two flag bits;
ensure we don't call block_signals() twice in sigreturn codepaths;
document and assert() the guarantee that using do_sigprocmask() to
get the current mask never fails; use the qemu atomics.h functions
rather than raw volatile variable access; add extra commentary and
documentation; block SIGSEGV/SIGBUS in block_signals() and in
process_pending_signals() because they can't occur synchronously here;
check the right do_sigprocmask() call for errors in ssetmask syscall;
expand commit message; fixed sigsuspend() hanging]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
All the architecture specific handlers for sigreturn include calls
to do_sigprocmask(SIGSETMASK, &set, NULL) to set the signal mask
from the uc_sigmask in the context being restored. Factor these
out into calls to a set_sigmask() function. The next patch will
want to add code which is not run when setting the signal mask
via do_sigreturn, and this change allows us to separate the two
cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Fix a stray tab-indented linux in linux-user/signal.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Move the handle_pending_signal() function above process_pending_signals()
to avoid the need for a forward declaration. (Whitespace only change.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Factor out the code to handle a single signal from the
process_pending_signals() function. The use of goto for flow control
is OK currently, but would get significantly uglier if extended to
allow running the handle_signal code multiple times.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
setup_frame()/setup_rt_frame()/restore_user_regs() are using
MSR_LE as the similar kernel functions do: as a bitmask.
But in QEMU, MSR_LE is a bit position, so change this
accordingly.
The previous code was doing nothing as MSR_LE is 0,
and "env->msr &= ~MSR_LE" doesn't change the value of msr.
And yes, a user process can change its endianness,
see linux kernel commit:
fab5db9 [PATCH] powerpc: Implement support for setting little-endian mode via prctl
and prctl(2): PR_SET_ENDIAN, PR_GET_ENDIAN
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
|
|
microblaze restorer
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Original implementation uses do_rt_sigreturn directly in host space,
when a guest program is in unwind procedure in guest space, it will get
an incorrect restore address, then causes unwind failure.
Also cleanup the original incorrect indentation.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
If a signal is delivered immediately before a blocking system call the
handler will only be called after the system call returns, which may be a
long time later or never.
This is fixed by using a function (safe_syscall) that checks if a guest
signal is pending prior to making a system call, and if so does not call the
system call and returns -TARGET_ERESTARTSYS. If a signal is received between
the check and the system call host_signal_handler() rewinds execution to
before the check. This rewinding has the effect of closing the race window
so that safe_syscall will reliably either (a) go into the host syscall
with no unprocessed guest signals pending or or (b) return
-TARGET_ERESTARTSYS so that the caller can deal with the signals.
Implementing this requires a per-host-architecture assembly language
fragment.
This will also resolve the mishandling of the SA_RESTART flag where
we would restart a host system call and not call the guest signal handler
until the syscall finally completed -- syscall restarting now always
happens at the guest syscall level so the guest signal handler will run.
(The host syscall will never be restarted because if the host kernel
rewinds the PC to point at the syscall insn for a restart then our
host_signal_handler() will see this and arrange the guest PC rewind.)
This commit contains the infrastructure for implementing safe_syscall
and the assembly language fragment for x86-64, but does not change any
syscalls to use it.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM:
* Avoid having an architecture if-ladder in configure by putting
linux-user/host/$(ARCH) on the include path and including
safe-syscall.inc.S from it
* Avoid ifdef ladder in signal.c by creating new hostdep.h to hold
host-architecture-specific things
* Added copyright/license header to safe-syscall.inc.S
* Rewrote commit message
* Added comments to safe-syscall.inc.S
* Changed calling convention of safe_syscall() to match syscall()
(returns -1 and host error in errno on failure)
* Added a long comment in qemu.h about how to use safe_syscall()
to implement guest syscalls.
]
RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts"
patch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Update the Microblaze main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this in passing fixes a bug where we were corrupting
the guest r[3] on sigreturn with the guest's r[10] because
do_sigreturn() was returning env->regs[10] but the register for
syscall return values is env->regs[3].
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-11-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define;
drop whitespace changes]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the tilegx main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* return -TARGET_QEMU_ESIGRETURN from sigreturn rather than current R_RE
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this fixes a bug where a sigreturn which happened to have
an errno value in TILEGX_R_RE would incorrectly cause TILEGX_R_ERR
to get set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the CRIS main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-34-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the S390 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-33-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; remove stray double semicolon; drop
TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the M68K main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-32-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the Alpha main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-13-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define;
PC is env->pc, not env->ir[IR_PV]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the SH4 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-12-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the SPARC main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the 32-bit and 64-bit ARM main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the x86 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code rather than passing it
back out as the "return code" from do_sigreturn()
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch EAX
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Some of the signal handling was a mess with a mixture of tabs and 8 space
indents.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-3-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: just rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
|
|
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
|
|
To return from a signal, setup_frame() puts an instruction to
be executed in the stack. This sequence calls the syscall sigreturn().
The address of the instruction must be set in the PR register
to be executed.
This patch fixes this: the current code sets the register to the address
of the instruction in the host address space (which can be 64bit whereas
PR is only 32bit), but the virtual CPU can't access this address space,
so we put in PR the address of the instruction in the guest address space.
This patch also removes an useless variable (ret) in the modified functions.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
"Unimplemented" messages go to stderr, everything else goes to tracepoints
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
[rth: Remove the spreg[EX1] handling, as it's irrelevant to user-mode.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443312618-13641-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
target openrisc
qemu has already considered about some targets may have no traditional
signals. And openrisc's setup_frame() is dummy, but it can be supported
by setup_rt_frame().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
All of the core-code usages of this API have the cpu pointer handy so
pass it in. There are only 3 architecture specific usages (2 of which
are commented out) which can just use ENV_GET_CPU() locally to get the
cpu pointer. The reduces core code usage of the CPU env, which brings
us closer to common-obj'ing these core files.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Provide a routine to access the correct floating point register,
to simplify future expansion.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
The m68k signal frame setup code which writes the signal return
trampoline code to the stack was assuming that a 'long' was 32 bits;
on 64 bit systems this meant we would end up writing the 32 bit
(2 insn) trampoline sequence to retaddr+4,retaddr+6 instead of
the intended retaddr+0,retaddr+2, resulting in a guest crash when
it tried to execute the invalid zero-bytes at retaddr+0.
Fix by using uint32_t instead; also use uint16_t rather than short
for consistency. This fixes bug LP:1404690.
Reported-by: Michel Boaventura
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
The function copy_siginfo_to_user() just calls tswap_siginfo(), so
call the latter function directly and delete the wrapper function.
The wrapper is actually misleading since it implies that the
semantics are like the kernel function with the same name which
copies the data to a guest user-space address. In fact tswap_siginfo()
just does data-structure conversion between two structures whose
addresses are host addresses (the copy to userspace is handled
in QEMU by the lock_user/unlock_user calls).
This also fixes clang complaints about the wrapper being unused
in some configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Remove the function current_exec_domain_sig(), which always returns
its argument. This was intended as a stub for supporting the kernel's
exec_domain handling, but:
* we don't have any of the other code for execution domains
* in the kernel this handling is architecture-specific, not generic
* we only call this function in the x86, ppc and sh4 signal code paths,
and the PPC one is wrong anyway because the PPC kernel doesn't
have this signal-remapping code
So it's best to simply delete the function; any future attempt to
implement exec domains will be better served by adding the correct
code from scratch based on the kernel sources at that time.
This change also fixes some clang warnings about the function being
defined but not used for some target architectures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Function pointers in the 64-bit ELFv2 PowerPC ABI are actual (internal)
entry point addresses. However, when invoking a function via a function
pointer, GPR 12 must also be set to this address so that the TOC may be
handled properly.
Add this support to the invocation of a signal handler.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Eliminate the stub for the do_setcontext() function for TARGET_PPC64. The
implementation re-uses the existing TARGET_PPC32 code with the only change
being the computation of the address of the register save area.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Properly dereference 64-bit PPC ELF V1 ABIT function pointers to signal handlers.
On this platform, function pointers are pointers to structures and the first 64
bits of such a structure contains the function's entry point. The second 64 bits
contains the TOC pointer, which must be placed into GPR 2.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Enable the 64-bit PowerPC signal handling code that was previously
disabled via #ifdefs. Specifically:
- Move the target_mcontext (register save area) structure and
append it to the 64-bit target_sigcontext structure. This
provides the space on the stack for saving and restoring
context.
- Define the target_rt_sigframe for 64-bit.
- Adjust the setup_frame and setup_rt_frame routines to properly
select the target_mcontext area and trampoline within the stack
frame; tthis is different for 32-bit and 64-bit implementations.
- Adjust the do_setcontext stub for 64-bit so that it compiles
without warnings.
The 64-bit signal handling code is still not functional after this
change; but the 32-bit code is. Subsequent changes will address
specific issues with the 64-bit code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix build on 32bit hosts, ppc64abi32]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Split the encoding of the PowerPC sigreturn trampoline from the saving of
register state onto the signal handler stack. This will make it easier
in subsequent patches to deal with variations in the stack frame layouts between
32 and 64 bit PowerPC.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The code that sets the stack frame back pointer is incorrect for
the setup_rt_frame() code; qemu will abort (SIGSEGV) in some
environments. The setup_frame code was fixed in commit
beb526b12134a6b6744125deec5a7fe24a8f92e3 but the setup_rt_frame
code was not.
Make the setup_rt_frame code consistent with the setup_frame
code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was
2048 previously.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
As reported by Laurent, which should use TARGET_SA_ONSTACK
on arm, microblaze and openrisc targets like we do on all
others. Practical matter is minimal as for almost all archs
SA_ONSTACK is 0x08000000:
http://lxr.free-electrons.com/ident?i=SA_ONSTACK
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
The last remaining check for return value of __get_user.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
|
|
Remove checks of __get_user and the err variable
used to control flow with it.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
As __get_user and __put_user do not return errors, remove the
if checks from around them. This allows making the save/restore
functions void.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
|
|
Remove "if(__put_user" checks and their related error paths
for all architecture's setup_frame, setup_rt_frame and similar.
Remove the unlock_user_struct when the only way to end up there is
from failed lock_user_struct.
Remove err variable if there are no users for it in the function
anymore.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
