aboutsummaryrefslogtreecommitdiff
path: root/linux-user/s390x
AgeCommit message (Collapse)Author
2023-10-30linux-user/s390x: Add vdsoRichard Henderson
Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-30linux-user/s390x: Rename __SIGNAL_FRAMESIZE to STACK_FRAME_OVERHEADRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-01linux-user: Split out cpu/target_proc.hRichard Henderson
Move the various open_cpuinfo functions into new files. Move the m68k open_hardware function as well. All other guest architectures get a boilerplate empty file. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-08linux-user: Define ELF_ET_DYN_BASE in $guest/target_mman.hRichard Henderson
Copy each guest kernel's default value, then bound it against reserved_va or the host address space. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-08linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.hRichard Henderson
Provide default values that are as close as possible to the values used by the guest's kernel. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05linux-user/s390x: Fix single-stepping SVCIlya Leoshkevich
Currently single-stepping SVC executes two instructions. The reason is that EXCP_DEBUG for the SVC instruction itself is masked by EXCP_SVC. Fix by re-raising EXCP_DEBUG. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230510230213.330134-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-09-27linux-user/s390x: Save/restore fpc when handling a signalIlya Leoshkevich
Linux kernel does this in fpregs_store() and fpregs_load(), so qemu-user should do this as well. Found by running valgrind's none/tests/s390x/test_sig. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220817123902.585623-1-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-09-27linux-user: Provide MADV_* definitionsIlya Leoshkevich
Provide MADV_* definitions using target_mman.h header, similar to what kernel does. Most architectures use the same values, with the exception of alpha and hppa. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-05-23linux-user/s390x: Fix unwinding from signal handlersIlya Leoshkevich
Commit 31330e6cecfd ("linux-user/s390x: Implement setup_sigtramp") removed an unused field from rt_sigframe, disturbing offsets of other fields and breaking unwinding from signal handlers (e.g. libgcc's s390_fallback_frame() relies on this struct having a specific layout). Restore the field and add a comment. Reported-by: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Fixes: 31330e6cecfd ("linux-user/s390x: Implement setup_sigtramp") Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220503225157.1696774-2-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01linux-user: Move generic TARGET_RLIMIT* definitions to generic/target_resource.hSerge Belyshev
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Message-Id: <87ee4ql3yk.fsf_-_@depni.sinp.msu.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11linux-user/s390x: Use force_sig_faultRichard Henderson
Use the new function instead of setting up a target_siginfo_t and calling queue_signal. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Split out do_prctl and subroutinesRichard Henderson
Since the prctl constants are supposed to be generic, supply any that are not provided by the host. Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE, PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL, PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do not support these options rather than pass them on to the host. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: target_syscall.h remove definition TARGET_MINSIGSTKSZSong Gao
TARGET_MINSIGSTKSZ has been defined in generic/signal.h or target_signal.h, We don't need to define it again. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Move target_signal.h generic definitions to generic/signal.hSong Gao
No code change Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-2-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-12-19linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURNRichard Henderson
This value is fully internal to qemu, and so is not a TARGET define. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-19linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYSRichard Henderson
This value is fully internal to qemu, and so is not a TARGET define. We use this as an extra marker for both host and target errno. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02target/s390x: Implement s390_cpu_record_sigsegvRichard Henderson
Move the masking of the address from cpu_loop into s390_cpu_record_sigsegv -- this is governed by hw, not linux. This does mean we have to raise our own exception, rather than return to the fallback. Use maperr to choose between PGM_PROTECTION and PGM_ADDRESSING. Use the appropriate si_code for each in cpu_loop. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-01linux-user/s390x: Implement setup_sigtrampRichard Henderson
Create and record the two signal trampolines. Use them when the guest does not use SA_RESTORER. Cc: qemu-s390x@nongnu.org Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210929130553.121567-22-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split linux-user internals out of qemu.hPeter Maydell
qemu.h is included in various non-linux-user files (which mostly want the TaskState struct and the functions for doing usermode access to guest addresses like lock_user(), unlock_user(), get_user*(), etc). Split out the parts that are only used in linux-user itself into a new user-internals.h. This leaves qemu.h with basically three things: * the definition of the TaskState struct * the user-access functions and macros * do_brk() all of which are needed by code outside linux-user that includes qemu.h. The addition of all the extra #include lines was done with sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user) (and then undoing the change to fpa11.h). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split signal-related prototypes into signal-common.hPeter Maydell
Split the signal related prototypes into the existing header file signal-common.h, and include it in those places that now require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-08-03linux-user/s390x: signal with SIGFPE on compare-and-trapJonathan Albrecht
Currently when a compare-and-trap instruction is executed, qemu will always raise a SIGILL signal. On real hardware, a SIGFPE is raised. Change the PGM_DATA case in cpu_loop to follow the behavior in linux kernel /arch/s390/kernel/traps.c. * Only raise SIGILL if DXC == 0 * If DXC matches a non-simulated IEEE exception, raise SIGFPE with correct si_code * Raise SIGFPE with si_code == 0 for everything else When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes crashes in the java jdk such as the linked bug. Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Buglink: https://bugs.launchpad.net/qemu/+bug/1920913 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319 Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-08-03target/s390x: Fix SIGILL and SIGFPE psw.addr reportingIlya Leoshkevich
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the instruction, and at the instruction for other signals. Currently under qemu-user for SIGFILL and SIGFPE it points at the instruction. Fix by advancing psw.addr for these signals. Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319 Message-Id: <20210705210434.45824-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-07-13linux-user: update syscall.tbl to Linux v5.13Laurent Vivier
Updated running scripts/update-syscalltbl.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210708215756.268805-4-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user: Extract target errno to 'target_errno_defs.h'Philippe Mathieu-Daudé
We want to access the target errno indepently of the rest of the linux-user code. Move the header containing the generic errno definitions ('errno_defs.h') to 'generic/target_errno_defs.h', create a new 'target_errno_defs.h' in each target which itself includes 'generic/target_errno_defs.h'. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-21linux-user/s390x: Save and restore psw.mask properlyRichard Henderson
At present, we're referencing env->psw.mask directly, which fails to ensure that env->cc_op is incorporated or updated. Use s390_cpu_{set_psw,get_psw_mask} to fix this. Mirror the kernel's cleaning of the psw.mask in save_sigregs and restore_sigregs. Ignore PSW_MASK_RI for now, as qemu does not support that. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com> Tested-by: <ruixin.bao@ibm.com> Message-Id: <20210615030744.1252385-6-richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-05-18linux-user/s390x: Handle vector regs in signal stackRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-16-richard.henderson@linaro.org> [lv: fix indentation] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Clean up signal.cRichard Henderson
Reorder the function bodies to correspond to the kernel source. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-15-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Add build asserts for sigset sizesRichard Henderson
At point of usage, it's not immediately obvious that we don't need a loop to copy these arrays. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-14-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Fix frame_addr corruption in setup_frameRichard Henderson
The original value of frame_addr is still required for its use in the call to unlock_user_struct below. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-13-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Add stub sigframe argument for last_breakRichard Henderson
In order to properly present these arguments, we need to add code to target/s390x to record LowCore parameters for user-only. But in the meantime, at least zero the missing last_break argument, and fixup the comment style in the vicinity. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-12-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Set psw.mask properly for the signal handlerRichard Henderson
Note that PSW_ADDR_{64,32} are called PSW_MASK_{EA,BA} in the kernel source. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-11-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Clean up single-use gotos in signal.cRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-10-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Tidy save_sigregsRichard Henderson
The "save" routines copied from the kernel, which are currently commented out, are unnecessary in qemu. We can copy from env where the kernel needs special instructions. Fix comment style. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-9-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Use tswap_sigset in setup_rt_frameRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-8-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Fix sigcontext sregs valueRichard Henderson
Using the host address of &frame->sregs is incorrect. We need the guest address. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-7-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Fix trace in restore_regsRichard Henderson
Directly reading sc->regs.psw.addr misses the bswap that may be performed by __get_user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-6-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Remove restore_sigregs return valueRichard Henderson
The function cannot fail. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-5-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Remove PSW_ADDR_AMODERichard Henderson
This is an unnecessary complication since we only support 64-bit mode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-4-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Use uint16_t for signal retcodeRichard Henderson
Using the right type simplifies the frame setup. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user/s390x: Fix sigframe typesRichard Henderson
Noticed via gitlab clang-user job: TEST signals on s390x ../linux-user/s390x/signal.c:258:9: runtime error: \ 1.84467e+19 is outside the range of representable values of \ type 'unsigned long' Which points to the fact that we were performing a double-to-uint64_t conversion while storing the fp registers, instead of just copying the data across. Turns out there are several errors: target_ulong is the size of the target register, whereas abi_ulong is the target 'unsigned long' type. Not a big deal here, since we only support 64-bit s390x, but not correct either. In target_sigcontext and target ucontext, we used a host pointer instead of a target pointer, aka abi_ulong. Fixing this allows the removal of a cast to __put_user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210428193408.233706-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user: Pass CPUArchState to target_restore_altstackRichard Henderson
In most cases we were already passing get_sp_from_cpustate directly to the function. In other cases, we were passing a local variable which already contained the same value. In the rest of the cases, we were passing the stack pointer out of env directly. Reviewed by: Warner Losh <imp@bsdimp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user: Use target_restore_altstack in all sigreturnRichard Henderson
Note that target_restore_altstack uses the host memory pointer that we have already verified, so TARGET_EFAULT is not a possible return value. Note that using -EFAULT was a bug. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-25linux-user/s390x: Use the guest pointer for the sigreturn stubAndreas Krebbel
When setting up the pointer for the sigreturn stub in the return address register (r14) we currently use the host frame address instead of the guest frame address. Note: This only caused problems if Qemu has been built with --disable-pie (as it is in distros nowadays). Otherwise guest_base defaults to 0 hiding the actual problem. Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210324185128.63971-1-krebbel@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-15linux user: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-11linux-user: Correct definition of stack_tLemonBoy
Some platforms used the wrong definition of stack_t where the flags and size fields were swapped or where the flags field had type ulong instead of int. Due to the presence of padding space in the structure and the prevalence of little-endian machines this problem went unnoticed for a long time. The type definitions have been cross-checked with the ones defined in the Linux kernel v5.9, plus some older versions for a few architecture that have been removed and Xilinx's kernel fork for NiosII [1]. The bsd-user headers remain unchanged as I don't know if they are wrong or not. [1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-26linux-user: update syscall.tbl to Linux 5.9-rc7Laurent Vivier
Updated running scripts/update-syscalltbl.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200930003033.554124-4-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27linux-user: Add generic 'termbits.h' for some archsFilip Bozuta
This patch introduces a generic 'termbits.h' file for following archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2', 'openrisc', 'riscv', 's390x', 'x86_64'. Since all of these archs have the same termios flag values and same ioctl_tty numbers, there is no need for a separate 'termbits.h' file for each one of them. For that reason one generic 'termbits.h' file was added for all of them and an '#include' directive was added for this generic file in every arch 'termbits.h' file. Also, some of the flag values that were missing were added in this generic file so that it matches the generic 'termibts.h' and 'ioctls.h' files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27linux-user: Add strace support for printing arguments of syscalls used to ↵Filip Bozuta
lock and unlock memory This patch implements strace argument printing functionality for following syscalls: * mlock, munlock, mlockall, munlockall - lock and unlock memory int mlock(const void *addr, size_t len) int munlock(const void *addr, size_t len) int mlockall(int flags) int munlockall(void) man page: https://man7.org/linux/man-pages/man2/mlock.2.html Implementation notes: Syscall mlockall() takes an argument that is composed of predefined values which represent flags that determine the type of locking operation that is to be performed. For that reason, a printing function "print_mlockall" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print the "flags" argument. These flags are stated inside an array "mlockall_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_TARGET()" that crates aproppriate target flag values based on those defined in files '/target_syscall.h'. These target flag values were changed from "TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT" was added in this patch. This value was also added in "syscall.c" in function "target_to_host_mlockall_arg()". Because this flag value was added in kernel version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and in "strace.c") as to support older kernel versions. The other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Syscall mlock2() is not implemented in "syscall.c" and thus it's argument printing is not implemented in this patch. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: linux-userMarc-André Lureau
The most interesting or most complicated part here is the syscall_nr.h generators. In order to keep the generation logic all in meson.build, I am adding to config_target the name of the .tbl file, and making the generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl. For architectures where the input file is not named syscall_nr.tbl, syscall_nr.h has to be a source file; it's just a forwarder for x86 (i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 04:08:16 +0000