aboutsummaryrefslogtreecommitdiff
path: root/linux-user/mips
AgeCommit message (Collapse)Author
2016-09-23linux-user: Add missing TARGET_EDQUOT error code for MipsAleksandar Markovic
EDQUOT is defined for Mips platform in Linux kernel in such a way that it has different value than on most other platforms. However, correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover, TARGET_EDQUOT is missing from the table for conversion of error codes from host to target. This patch fixes these problems. Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(), open(), rename(), request_key(), setxattr(), symlink(), and write() will not be able to return the right error code in some scenarios on Mips platform. (Some of these syscalls are not yet supported in Qemu, but once they are supported, they will need correct EDQUOT handling.) Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23linux-user: Fix structure target_semid64_ds definition for MipsAleksandar Markovic
This patch corrects target_semid64_ds structure definition for Mips. See, for example definition of semid64_ds for Mips in Linux kernel: arch/mips/include/uapi/asm/sembuf.h#L13. This patch will also fix certain semaphore-related LTP tests for Mips, if they are executed in Qemu user mode for any Mips platform. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Acked-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-21linux-user: Use correct target SHMLBA in shmat()Peter Maydell
The shmat() handling needs to do target-specific handling of the attach address for shmat(): * if the SHM_RND flag is passed, the address is rounded down to a SHMLBA boundary * if SHM_RND is not passed, then the call is failed EINVAL if the address is not a multiple of SHMLBA Since SHMLBA is target-specific, we need to do this checking and rounding in QEMU and can't leave it up to the host syscall. Allow targets to define TARGET_FORCE_SHMLBA and provide a target_shmlba() function if appropriate, and update do_shmat() to honour them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-12linux-user: Clean up target_structs.h header guardsMarkus Armbruster
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_signal.h header guardsMarkus Armbruster
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_cpu.h header guardsMarkus Armbruster
These headers all use TARGET_CPU_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_CPU_H for linux-user/$target/target_cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_syscall.h header guardsMarkus Armbruster
Some of them use guard symbol TARGET_SYSCALL_H, but we also have CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and __UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl. Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is okay as long as they cannot be included together. The script can't tell, so it warns. The script dislikes the other guard symbols, too. They don't match their file name (they should, to make guard collisions less likely), and __UC32_SYSCALL_H__ is a reserved identifier. Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for linux-user/$target/target_sycall.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-27linux-user: Support for restarting system calls for MIPS targetsTimothy E Baldwin
Update the MIPS main loop code: * on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn (We already handle TARGET_QEMU_ESIGRETURN.) Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-7-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27linux-user: Renumber TARGET_QEMU_ESIGRETURN, make it not arch-specificTimothy E Baldwin
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN only on the MIPS and PPC targets; move this to errno_defs.h so it is available for all architectures, and renumber it to 513. We pick 513 because this is safe from future use as a system call return value: Linux uses it as ERESTART_NOINTR internally and never allows that errno to escape to userspace. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23build: [linux-user] Rename "syscall.h" to "target_syscall.h" in target ↵Lluís Vilanova
directories This fixes double-definitions in linux-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11Add missing syscall nrs. according to more recent Linux kernelsJohan Ouwerkerk
This change covers arm, aarch64, mips. Others to follow? The change was prompted by QEMU warning about a syscall 384 (get_random()) with Debian armhf binaries (ARMv7). Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-22linux-user: Support target-to-host translation of mlockall argumentTom Musta
The argument to the mlockall system call is not necessarily the same on all platforms and thus may require translation prior to passing to the host. For example, PowerPC 64 bit platforms define values for MCL_CURRENT (0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms (0x1 and 0x2, respectively) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2Tom Musta
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was 2048 previously. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-18target-mips: implement UserLocal RegisterPetar Jovanovic
From MIPS documentation (Volume III): UserLocal Register (CP0 Register 4, Select 2) Compliance Level: Recommended. The UserLocal register is a read-write register that is not interpreted by the hardware and conditionally readable via the RDHWR instruction. This register only exists if the Config3-ULRI register field is set. Privileged software may write this register with arbitrary information and make it accessible to unprivileged software via register 29 (ULR) of the RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a 1 to enable unprivileged access to the register. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-03-10linux-user: set minimum kernel version to 2.6.32Riku Voipio
Popular glibc based distributions[1] require minimum 2.6.32 as kernel version. For some targets 2.6.18 would be enough, but dropping so low would mean some suboptimal system calls could get used. Set the minimum kernel advertized to 2.6.32 for all architectures but aarch64 to ensure working qemu linux-user in case host kernel is older. [1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078 Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-18linux-user: sync syscall numbers upto 3.13Riku Voipio
All others updated except unicore, which doesn't look right to begin with. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29linux-user: create target_structs header to place ipc_perm and shmid_dsPetar Jovanovic
Creating target_structs header in linux-user/$arch/ and making target_ipc_perm and target_shmid_ds its first inhabitants. The struct defintions may/should be further fine-tuned by arch maintainers. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Clean up handling of clone() argument orderPeter Maydell
Linux manages to have three separate orderings of the arguments to the clone() syscall on different architectures. In the kernel these are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2. Clean up our implementation of this to use similar #define names rather than a TARGET_* ifdef ladder. This includes behaviour changes fixing bugs on cris, x86-64, m68k, openrisc and unicore32. cris had explicit but wrong handling; the others were just incorrectly using QEMU's default, which happened to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears to be broken in the mainline kernel in that it tries to use arg3 for both parent_tidptr and newtls simultaneously -- we don't attempt to emulate this bug...) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2011-07-11linux-user: Add syscall numbers from kernel 2.6.39.2Peter Maydell
Add syscall numbers for new syscall numbers; this brings us into line with Linux 2.6.39.2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2010-12-03linux-user: fix mips and ppc to use UID16Martin Mohring
Signed-off-by: Martin Mohring <martin.mohring@5edatasoft.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-06-16linux-user: update syscall listRiku Voipio
In preparation for supporting pipe2() Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2009-04-21MIPS signal handling fixes.pbrook
Also fixes a register corruption bug in do_sigreturn. When "returning" from sigreturn we are actually restoring the virtual cpu state from the signal frame. This is actually surprisingly hard to observe in practice. Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives, so the effect is a spurious syscall success and the introduction of a subtle race condition. On x86/arm a syscall modifies a single word sized register, so do_sigreturn can just return that value. On MIPS a syscall clobbers multiple registers, so we need additional smarts. My solution is to invent a magic errno value that means "don't touch CPU state". git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-27More efficient target register / TC accesses.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4794 c046a42c-6fe2-441c-8c8c-71466251a162
2008-02-12Make MIPS MT implementation more cache friendly.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3981 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-14 Support for 32 bit ABI on 64 bit targets (only enabled Sparc64)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3396 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-30Code provision for n32/n64 mips userland emulation. Not functional yet.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3284 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-27Move get_sp_from_cpustate from cpu.h to target_signal.h.ths
Enable sigaltstack processing for more architectures. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3253 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-27linux-user sigaltstack() syscall, by Thayne Harbaugh.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3252 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-23Add new MIPS/Linux syscalls.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3214 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-23Correct and update mips termbits.h.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3213 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-01linux-user errno mapping, by Stuart Anderson.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2908 c046a42c-6fe2-441c-8c8c-71466251a162
2007-05-13MIPS linux-user update.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2810 c046a42c-6fe2-441c-8c8c-71466251a162
2007-03-02MIPS Userland TLS register emulation, by Daniel Jacobowitz.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2465 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-28correct ioctlsbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1679 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-28uid32 syscallsbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1678 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-26mips user emulationbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1668 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 16:10:02 +0000