aboutsummaryrefslogtreecommitdiff
path: root/linux-user/mips64
AgeCommit message (Collapse)Author
2023-07-15linux-user: Split TARGET_MAP_* out of syscall_defs.hRichard Henderson
Move the values into the per-target target_mman.h headers Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230707204054.8792-7-richard.henderson@linaro.org>
2022-09-27linux-user: Provide MADV_* definitionsIlya Leoshkevich
Provide MADV_* definitions using target_mman.h header, similar to what kernel does. Most architectures use the same values, with the exception of alpha and hppa. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-02-01linux-user: Move generic TARGET_RLIMIT* definitions to generic/target_resource.hSerge Belyshev
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Message-Id: <87ee4ql3yk.fsf_-_@depni.sinp.msu.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Split out do_prctl and subroutinesRichard Henderson
Since the prctl constants are supposed to be generic, supply any that are not provided by the host. Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE, PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL, PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do not support these options rather than pass them on to the host. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Remove TARGET_SIGSTKSZSong Gao
TARGET_SIGSTKSZ is not used, we should remove it. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-4-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: target_syscall.h remove definition TARGET_MINSIGSTKSZSong Gao
TARGET_MINSIGSTKSZ has been defined in generic/signal.h or target_signal.h, We don't need to define it again. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01linux-user/mips: Implement setup_sigtrampRichard Henderson
Create and record the two signal trampolines. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210929130553.121567-16-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13linux-user: update syscall.tbl to Linux v5.13Laurent Vivier
Updated running scripts/update-syscalltbl.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210708215756.268805-4-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user/mips: Move errno definitions to 'target_errno_defs.h'Philippe Mathieu-Daudé
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-7-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user: Extract target errno to 'target_errno_defs.h'Philippe Mathieu-Daudé
We want to access the target errno indepently of the rest of the linux-user code. Move the header containing the generic errno definitions ('errno_defs.h') to 'generic/target_errno_defs.h', create a new 'target_errno_defs.h' in each target which itself includes 'generic/target_errno_defs.h'. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07linux-user/mips: Handle TARGET_EWOULDBLOCK as TARGET_EAGAINPhilippe Mathieu-Daudé
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210704183755.655002-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-15linux-user/mips: Support the n32 ABI for the R5900Fredrik Noring
Recognise the R5900, which reports itself as MIPS III, as a 64-bit CPU supporting the n32 ABI. Signed-off-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <5bea109f0c140da6a821aa7f9705d4b3717e86dc.1541701393.git.noring@nocrew.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-13linux-user: target: signal: Support TARGET_SS_AUTODISARMChen Gang
Add definitions to pass building. Signed-off-by: Chen Gang <chengang@emindsoft.com.cn> Message-Id: <20201008043105.21058-1-chengang@emindsoft.com.cn> [lv: added the definitions in linux-user/generic/signal.h too] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-13linux-user/mips64: Support o32 ABI syscallsPhilippe Mathieu-Daudé
o32 ABI syscalls start at offset 4000. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201119161710.1985083-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-13linux-user/mips64: Restore setup_frame() for o32 ABIPhilippe Mathieu-Daudé
64-bit MIPS targets lost setup_frame() during the refactor in commit 8949bef18b9. Restore it declaring TARGET_ARCH_HAS_SETUP_FRAME, to be able to build the o32 ABI target. Fixes: 8949bef18b9 ("linux-user: move mips/mips64 signal.c parts to mips directory") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201119161710.1985083-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-15linux user: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-11linux-user: Correct definition of stack_tLemonBoy
Some platforms used the wrong definition of stack_t where the flags and size fields were swapped or where the flags field had type ulong instead of int. Due to the presence of padding space in the structure and the prevalence of little-endian machines this problem went unnoticed for a long time. The type definitions have been cross-checked with the ones defined in the Linux kernel v5.9, plus some older versions for a few architecture that have been removed and Xilinx's kernel fork for NiosII [1]. The bsd-user headers remain unchanged as I don't know if they are wrong or not. [1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-26linux-user: update syscall.tbl to Linux 5.9-rc7Laurent Vivier
Updated running scripts/update-syscalltbl.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200930003033.554124-4-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27linux-user: Add strace support for printing arguments of syscalls used to ↵Filip Bozuta
lock and unlock memory This patch implements strace argument printing functionality for following syscalls: * mlock, munlock, mlockall, munlockall - lock and unlock memory int mlock(const void *addr, size_t len) int munlock(const void *addr, size_t len) int mlockall(int flags) int munlockall(void) man page: https://man7.org/linux/man-pages/man2/mlock.2.html Implementation notes: Syscall mlockall() takes an argument that is composed of predefined values which represent flags that determine the type of locking operation that is to be performed. For that reason, a printing function "print_mlockall" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print the "flags" argument. These flags are stated inside an array "mlockall_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_TARGET()" that crates aproppriate target flag values based on those defined in files '/target_syscall.h'. These target flag values were changed from "TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT" was added in this patch. This value was also added in "syscall.c" in function "target_to_host_mlockall_arg()". Because this flag value was added in kernel version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and in "strace.c") as to support older kernel versions. The other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Syscall mlock2() is not implemented in "syscall.c" and thus it's argument printing is not implemented in this patch. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: linux-userMarc-André Lureau
The most interesting or most complicated part here is the syscall_nr.h generators. In order to keep the generation logic all in meson.build, I am adding to config_target the name of the .tbl file, and making the generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl. For architectures where the input file is not named syscall_nr.tbl, syscall_nr.h has to be a source file; it's just a forwarder for x86 (i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-20linux-user: update syscall.tbl from linux 0bf999f9c5e7Laurent Vivier
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20200310103403.3284090-20-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-20linux-user, mips64: add syscall table generation supportLaurent Vivier
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from linux/arch/parisc/kernel/syscalls v5.5 Update syscallhdr.sh to generate QEMU syscall_nr.h Move the offsets (6000 for n32 and 5000 for n64) from the file to the Makefile.objs to be passed to syscallhdr.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20200310103403.3284090-18-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-17linux-user: mips: Update syscall numbers to kernel 5.5 levelAleksandar Markovic
Update mips syscall numbers based on Linux kernel tag v5.5. CC: Aurelien Jarno <aurelien@aurel32.net> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1581596954-2305-6-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-12Supply missing header guardsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2018-10-29linux-user: Add prctl() PR_SET_FP_MODE and PR_GET_FP_MODE implementationsStefan Markovic
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-10-18linux-user: Add MIPS-specific prctl() optionsStefan Markovic
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and TARGET_PR_SET_FP_MODE. These values are essentially copied from linux kernel header include/uapi/linux/prctl.h. This is done in a way consistent with a similar case of aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and TARGET_PR_SVE_GET_VL. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-16linux-user: Update MIPS syscall numbers up to kernel 4.18 headersAleksandar Markovic
Synchronize content of linux-user/mips/syscall_nr.h and linux-user/mips64/syscall_nr.h with Linux kernel 4.18 headers. This adds 9 new syscall numbers, the last being NR_io_pgetevents. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-06-04linux-user: move mips signal definitions to mips/target_signal.hLaurent Vivier
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-12-laurent@vivier.eu>
2018-06-04linux-user: move get_sp_from_cpustate() to target_cpu.hLaurent Vivier
Remove useless includes Fix HPPA include guard. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-9-laurent@vivier.eu>
2018-06-04linux-user: move generic fcntl definitions to generic/fcntl.hLaurent Vivier
add a per target target_fcntl.h and include the generic one from them No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
2018-05-25linux-user: move mips socket.h definitions to mips/sockbits.hLaurent Vivier
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180519092956.15134-2-laurent@vivier.eu>
2018-04-30linux-user: move mips/mips64 cpu loop to mips directoryLaurent Vivier
No code change, only move code from main.c to mips/cpu_loop.c. Include mips/cpu_loop.c in mips64/cpu_loop.c to avoid to duplicate code. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180411185651.21351-8-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch cpu_loop.cLaurent Vivier
Create a cpu_loop-common.h for future use by these new files and use it in the existing main.c Introduce target_cpu_copy_regs(): declare the function in cpu_loop-common.h and an empty function for each target, to move all the cpu_loop prologues to this function. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
2018-04-30linux-user: define TARGET_ARCH_HAS_SETUP_FRAMELaurent Vivier
Instead of calling setup_frame() conditionally to a list of known targets, define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function and call it only if the macro is defined. Move declarations of setup_frame() and setup_rt_frame() to linux-user/signal-common.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
2018-04-30linux-user: move mips/mips64 signal.c parts to mips directoryLaurent Vivier
No code change, only move code from signal.c to mips/signal.c, except adding includes and exporting setup_frame() and setup_rt_frame(). mips64/signal.c includes mips/signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-19-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch signal.cLaurent Vivier
Create a signal-common.h for future use by these new files and use it in the existing signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
2018-02-25linux-user: MIPS set cpu to r6 CPU if binary is R6YunQiang Su
So here we need to detect the version of binaries and set cpu_model for it. Signed-off-by: YunQiang Su <syq@debian.org> [lv: original patch modified to move code into cpu_get_model()] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180220173307.25125-5-laurent@vivier.eu>
2018-02-25linux-user: Move CPU type name selection to a functionLaurent Vivier
Instead of a sequence of "#if ... #endif" move the selection to a function in linux-user/*/target_elf.h We can't add them in linux-user/*/target_cpu.h because we will need to include "elf.h" to use ELF flags with eflags, and including "elf.h" in "target_cpu.h" introduces some conflicts in elfload.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
2017-01-22linux-user: Handle ERFKILL and EHWPOISONRichard Henderson
With definitions for generic, alpha and mips taken from 4.9-rc2. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-21linux-user: Redirect termbits.h for Mips64 to termbits.h for Mips32Aleksandar Markovic
linux-user/mips64/termbits.h and linux-user/mips/termbits.h originate from the same files in Linux kernel. There is no plan to split original headers in Linux kernel into Mips32 and Mips64 versions any time soon. Therefore, it is better not to have separate Mips32 and Mips64 variants in Qemu. This patch makes these two files effectively the same, allowing the mainenance by changing only a single file. (This is already done in the same fashion for some other headers in same directories.) Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-23linux-user: Add missing TARGET_EDQUOT error code for MipsAleksandar Markovic
EDQUOT is defined for Mips platform in Linux kernel in such a way that it has different value than on most other platforms. However, correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover, TARGET_EDQUOT is missing from the table for conversion of error codes from host to target. This patch fixes these problems. Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(), open(), rename(), request_key(), setxattr(), symlink(), and write() will not be able to return the right error code in some scenarios on Mips platform. (Some of these syscalls are not yet supported in Qemu, but once they are supported, they will need correct EDQUOT handling.) Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-21linux-user: Use correct target SHMLBA in shmat()Peter Maydell
The shmat() handling needs to do target-specific handling of the attach address for shmat(): * if the SHM_RND flag is passed, the address is rounded down to a SHMLBA boundary * if SHM_RND is not passed, then the call is failed EINVAL if the address is not a multiple of SHMLBA Since SHMLBA is target-specific, we need to do this checking and rounding in QEMU and can't leave it up to the host syscall. Allow targets to define TARGET_FORCE_SHMLBA and provide a target_shmlba() function if appropriate, and update do_shmat() to honour them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-12linux-user: Clean up target_signal.h header guardsMarkus Armbruster
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_syscall.h header guardsMarkus Armbruster
Some of them use guard symbol TARGET_SYSCALL_H, but we also have CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and __UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl. Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is okay as long as they cannot be included together. The script can't tell, so it warns. The script dislikes the other guard symbols, too. They don't match their file name (they should, to make guard collisions less likely), and __UC32_SYSCALL_H__ is a reserved identifier. Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for linux-user/$target/target_sycall.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-27linux-user: Support for restarting system calls for MIPS targetsTimothy E Baldwin
Update the MIPS main loop code: * on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn (We already handle TARGET_QEMU_ESIGRETURN.) Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-7-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27linux-user: Renumber TARGET_QEMU_ESIGRETURN, make it not arch-specificTimothy E Baldwin
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN only on the MIPS and PPC targets; move this to errno_defs.h so it is available for all architectures, and renumber it to 513. We pick 513 because this is safe from future use as a system call return value: Linux uses it as ERESTART_NOINTR internally and never allows that errno to escape to userspace. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23linux-user: sync syscall numbers with kernelRiku Voipio
Sync syscall numbers to match the linux v4.5-rc1 kernel. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23build: [linux-user] Rename "syscall.h" to "target_syscall.h" in target ↵Lluís Vilanova
directories This fixes double-definitions in linux-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-01-27mips64-linux-user: Fix definition of struct sigaltstackEd Swierk
Without this fix, qemu segfaults when emulating the sigaltstack syscall, because it incorrectly treats the ss_flags field as 64 bits rather than 32 bits. Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Support target-to-host translation of mlockall argumentTom Musta
The argument to the mlockall system call is not necessarily the same on all platforms and thus may require translation prior to passing to the host. For example, PowerPC 64 bit platforms define values for MCL_CURRENT (0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms (0x1 and 0x2, respectively) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 20:23:21 +0000