aboutsummaryrefslogtreecommitdiff
path: root/linux-user/cris
AgeCommit message (Collapse)Author
2024-06-30linux-user: cris: Remove unused struct 'rt_signal_frame'Dr. David Alan Gilbert
Since 'setup_rt_frame' has never been implemented, this struct is unused. Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-06{linux,bsd}-user: Introduce get_task_state()Ilya Leoshkevich
A CPU's TaskState is stored in the CPUState's void *opaque field, accessing which is somewhat awkward due to having to use a cast. Introduce a wrapper and use it everywhere. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240219141628.246823-3-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240305121005.3528075-4-alex.bennee@linaro.org>
2023-09-01linux-user: Split out cpu/target_proc.hRichard Henderson
Move the various open_cpuinfo functions into new files. Move the m68k open_hardware function as well. All other guest architectures get a boilerplate empty file. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-08linux-user: Define ELF_ET_DYN_BASE in $guest/target_mman.hRichard Henderson
Copy each guest kernel's default value, then bound it against reserved_va or the host address space. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-08linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.hRichard Henderson
Provide default values that are as close as possible to the values used by the guest's kernel. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-09-27linux-user: Provide MADV_* definitionsIlya Leoshkevich
Provide MADV_* definitions using target_mman.h header, similar to what kernel does. Most architectures use the same values, with the exception of alpha and hppa. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01linux-user: Move generic TARGET_RLIMIT* definitions to generic/target_resource.hSerge Belyshev
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Message-Id: <87ee4ql3yk.fsf_-_@depni.sinp.msu.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11linux-user: Move target_struct.h generic definitions to generic/Richard Henderson
Most targets share the same generic ipc structure definitions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220107042600.149852-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11linux-user/cris: Use force_sig_faultRichard Henderson
Use the new function instead of setting up a target_siginfo_t and calling queue_signal. Fill in the missing PC for SIGTRAP. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220107213243.212806-5-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Split out do_prctl and subroutinesRichard Henderson
Since the prctl constants are supposed to be generic, supply any that are not provided by the host. Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE, PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL, PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do not support these options rather than pass them on to the host. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: target_syscall.h remove definition TARGET_MINSIGSTKSZSong Gao
TARGET_MINSIGSTKSZ has been defined in generic/signal.h or target_signal.h, We don't need to define it again. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Move target_signal.h generic definitions to generic/signal.hSong Gao
No code change Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-2-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-12-19linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURNRichard Henderson
This value is fully internal to qemu, and so is not a TARGET define. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-19linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYSRichard Henderson
This value is fully internal to qemu, and so is not a TARGET define. We use this as an extra marker for both host and target errno. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02target/cris: Make cris_cpu_tlb_fill sysemu onlyRichard Henderson
The fallback code in cpu_loop_exit_sigsegv is sufficient for cris linux-user. Remove the code from cpu_loop that handled the unnamed 0xaa exception. This makes all of the code in helper.c sysemu only, so remove the ifdefs and move the file to cris_softmmu_ss. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-01linux-user/cris: Implement setup_sigtrampRichard Henderson
Split out setup_sigreturn so that we can continue to initialize the words on the stack, as documented. However, use the off-stack trampoline. Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210929130553.121567-8-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split linux-user internals out of qemu.hPeter Maydell
qemu.h is included in various non-linux-user files (which mostly want the TaskState struct and the functions for doing usermode access to guest addresses like lock_user(), unlock_user(), get_user*(), etc). Split out the parts that are only used in linux-user itself into a new user-internals.h. This leaves qemu.h with basically three things: * the definition of the TaskState struct * the user-access functions and macros * do_brk() all of which are needed by code outside linux-user that includes qemu.h. The addition of all the extra #include lines was done with sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user) (and then undoing the change to fpa11.h). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split signal-related prototypes into signal-common.hPeter Maydell
Split the signal related prototypes into the existing header file signal-common.h, and include it in those places that now require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user: Extract target errno to 'target_errno_defs.h'Philippe Mathieu-Daudé
We want to access the target errno indepently of the rest of the linux-user code. Move the header containing the generic errno definitions ('errno_defs.h') to 'generic/target_errno_defs.h', create a new 'target_errno_defs.h' in each target which itself includes 'generic/target_errno_defs.h'. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-15linux user: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-11linux-user: Correct definition of stack_tLemonBoy
Some platforms used the wrong definition of stack_t where the flags and size fields were swapped or where the flags field had type ulong instead of int. Due to the presence of padding space in the structure and the prevalence of little-endian machines this problem went unnoticed for a long time. The type definitions have been cross-checked with the ones defined in the Linux kernel v5.9, plus some older versions for a few architecture that have been removed and Xilinx's kernel fork for NiosII [1]. The bsd-user headers remain unchanged as I don't know if they are wrong or not. [1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-17linux-user/: fix some comment spelling errorszhaolichang
I found that there are many spelling errors in the comments of qemu, so I used the spellcheck tool to check the spelling errors and finally found some spelling errors in the linux-user folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: Alex Bennee <alex.bennee@linaro.org> Message-Id: <20200917075029.313-7-zhaolichang@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27linux-user: Add missing termbits types and values definitionsFilip Bozuta
This patch introduces missing target types ('target_flag_t', 'target_cc_t', 'target_speed_t') in a few 'termibts.h' header files. Also, two missing values ('TARGET_IUTF8' and 'TARGET_EXTPROC') were also added. These values were also added in file 'syscall.c' in bitmask tables 'iflag_tbl[]' and 'lflag_tbl[]' which are used to convert values of 'struct termios' between target and host. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200723210233.349690-3-Filip.Bozuta@syrmia.com> [lv: keep TARGET_NCCS definition in xtensa/termbits.h] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27linux-user: Add strace support for printing arguments of syscalls used to ↵Filip Bozuta
lock and unlock memory This patch implements strace argument printing functionality for following syscalls: * mlock, munlock, mlockall, munlockall - lock and unlock memory int mlock(const void *addr, size_t len) int munlock(const void *addr, size_t len) int mlockall(int flags) int munlockall(void) man page: https://man7.org/linux/man-pages/man2/mlock.2.html Implementation notes: Syscall mlockall() takes an argument that is composed of predefined values which represent flags that determine the type of locking operation that is to be performed. For that reason, a printing function "print_mlockall" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print the "flags" argument. These flags are stated inside an array "mlockall_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_TARGET()" that crates aproppriate target flag values based on those defined in files '/target_syscall.h'. These target flag values were changed from "TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT" was added in this patch. This value was also added in "syscall.c" in function "target_to_host_mlockall_arg()". Because this flag value was added in kernel version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and in "strace.c") as to support older kernel versions. The other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Syscall mlock2() is not implemented in "syscall.c" and thus it's argument printing is not implemented in this patch. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user: Introduce cpu_clone_regs_parentRichard Henderson
We will need a target-specific hook for adjusting registers in the parent during clone. Add an empty inline function for each target, and invoke it from the proper places. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user: Rename cpu_clone_regs to cpu_clone_regs_childRichard Henderson
We will need a target-specific hook for adjusting registers in the parent during clone. To avoid confusion, rename the one we have to make it clear it affects the child. At the same time, pass in the flags from the clone syscall. We will need them for correct behaviour for Sparc. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-12Supply missing header guardsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10target/cris: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace cris_env_get_cpu with env_archcpu. The combination CPU(cris_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-18qom/cpu: Simplify how CPUClass:cpu_dump_state() printsMarkus Armbruster
CPUClass method dump_statistics() takes an fprintf()-like callback and a FILE * to pass to it. Most callers pass fprintf() and stderr. log_cpu_state() passes fprintf() and qemu_log_file. hmp_info_registers() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The callback gets passed around a lot, which is tiresome. The type-punning around monitor_fprintf() is ugly. Drop the callback, and call qemu_fprintf() instead. Also gets rid of the type-punning, since qemu_fprintf() takes NULL instead of the current monitor cast to FILE *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2018-11-12linux-user: Don't call gdb_handlesig() before queue_signal()Peter Maydell
The CPU main-loop routines for linux-user generally call gdb_handlesig() when they're about to queue a SIGTRAP signal. This is wrong, because queue_signal() will cause us to pend a signal, and process_pending_signals() will then call gdb_handlesig() itself. So the effect is that we notify gdb of the SIGTRAP, and then if gdb says "OK, continue with signal X" we will incorrectly notify gdb of the signal X as well. We don't do this double-notify for anything else, only SIGTRAP. Remove this unnecessary and incorrect code from all the targets except for nios2 (whose main loop is doing something different and broken, and will be handled in a separate patch). This bug only manifests if the user responds to the reported SIGTRAP using "signal SIGFOO" rather than "continue"; since the latter is the overwhelmingly common thing to do after a breakpoint most people won't have hit this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-09linux-user: Report error message on stderr, rather than stdoutPhilippe Mathieu-Daudé
Code change produced with: git ls-files linux-user | \ xargs sed -i -E 's/(\s+)printf\s*\(("Unhandled.*)\);/\1fprintf(stderr, \2);/g' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180706155127.7483-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-09linux-user: Do not report "syscall not implemented" by defaultPhilippe Mathieu-Daudé
This can still be reported using the "-d unimp" command line option. Code change produced with: git ls-files linux-user | \ xargs sed -i -E 's/fprintf\(stderr,\s?(".*not implemented\\n")\);/qemu_log_mask(LOG_UNIMP, \1);/g' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180706155127.7483-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-06-04linux-user: move generic signal definitions to generic/signal.hLaurent Vivier
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-10-laurent@vivier.eu>
2018-06-04linux-user: move get_sp_from_cpustate() to target_cpu.hLaurent Vivier
Remove useless includes Fix HPPA include guard. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-9-laurent@vivier.eu>
2018-06-04linux-user: move generic fcntl definitions to generic/fcntl.hLaurent Vivier
add a per target target_fcntl.h and include the generic one from them No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
2018-05-25linux-user: move socket.h generic definitions to generic/sockbits.hLaurent Vivier
and include the file from architectures without specific definitions Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
2018-04-30linux-user: move cris cpu loop to cris directoryLaurent Vivier
No code change, only move code from main.c to cris/cpu_loop.c. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180411185651.21351-12-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch cpu_loop.cLaurent Vivier
Create a cpu_loop-common.h for future use by these new files and use it in the existing main.c Introduce target_cpu_copy_regs(): declare the function in cpu_loop-common.h and an empty function for each target, to move all the cpu_loop prologues to this function. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
2018-04-30linux-user: define TARGET_ARCH_HAS_SETUP_FRAMELaurent Vivier
Instead of calling setup_frame() conditionally to a list of known targets, define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function and call it only if the macro is defined. Move declarations of setup_frame() and setup_rt_frame() to linux-user/signal-common.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
2018-04-30linux-user: move cris signal.c parts to cris directoryLaurent Vivier
No code change, only move code from signal.c to cris/signal.c, except adding includes and exporting setup_frame() and setup_rt_frame(). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-7-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch signal.cLaurent Vivier
Create a signal-common.h for future use by these new files and use it in the existing signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
2018-02-25linux-user: Move CPU type name selection to a functionLaurent Vivier
Instead of a sequence of "#if ... #endif" move the selection to a function in linux-user/*/target_elf.h We can't add them in linux-user/*/target_cpu.h because we will need to include "elf.h" to use ELF flags with eflags, and including "elf.h" in "target_cpu.h" introduces some conflicts in elfload.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
2018-02-18linux-user: Implement ioctl cmd TIOCGPTPEERAndreas Schwab
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmbmhdosb9.fsf_-_@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-07-12linux-user: Clean up target_structs.h header guardsMarkus Armbruster
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_signal.h header guardsMarkus Armbruster
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_cpu.h header guardsMarkus Armbruster
These headers all use TARGET_CPU_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_CPU_H for linux-user/$target/target_cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_syscall.h header guardsMarkus Armbruster
Some of them use guard symbol TARGET_SYSCALL_H, but we also have CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and __UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl. Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is okay as long as they cannot be included together. The script can't tell, so it warns. The script dislikes the other guard symbols, too. They don't match their file name (they should, to make guard collisions less likely), and __UC32_SYSCALL_H__ is a reserved identifier. Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for linux-user/$target/target_sycall.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 05:26:55 +0000